is there a way to plug a flash memory or a hard drive to the TyTN II and browse it ?
like the toshiba g900 -
There's a way to add an external camera(at least I heard there is), so pending that's true, why wouldn't there be? You'd just have to come up with a proper way of adapting it.
Than again, I'm not sure if there are or aren't specific drivers in one that aren't in the other. I personally would like to find out for sure.
I have an adapter and i found this http://www.deje.gmxhome.de/software.html ( on the bottom) but it dosn't work
the tytnII has no built-in host-controller for usb, so no chance
So is this a dead end ?
shtepsel said:
So is this a dead end ?
Click to expand...
Click to collapse
yes i think it is because the kaiser doesn't have a built-in host-controller for usb as edi said.
The Celio Redfly would give USB host capability to the Kaiser, maybe try installing to drivers here.
Honestly said I'm still a noob and i don't know "Celio Redfly" does and it is the first time I hear it
dude did you actually try it
you must have a redfly device to get the job done if you were succesful!
hollywould said:
The Celio Redfly would give USB host capability to the Kaiser, maybe try installing to drivers here.
Click to expand...
Click to collapse
u cant use ur kaiser to replace windows os
so u cant connect kaiser to hdd or any other devices
shtepsel said:
is there a way to plug a flash memory or a hard drive to the TyTN II and browse it ?
like the toshiba g900 -
Click to expand...
Click to collapse
the idea is to browse the hdd ot flash not to boot from them
Couldn't somebody try extracting the drivers from said Toshiba PDA that would make it possible to use the USB to hook up an external drive?
silversonic1 said:
Couldn't somebody try extracting the drivers from said Toshiba PDA that would make it possible to use the USB to hook up an external drive?
Click to expand...
Click to collapse
that will be nice
shtepsel said:
that will be nice
Click to expand...
Click to collapse
And it would work if you could download the HARDWARE too :azz:
psionandy said:
And it would work if you could download the HARDWARE too :azz:
Click to expand...
Click to collapse
if you write a pm to me, i'll give you the download link
Can be done or not
No, it can't be done,
Usb Host functionality is not just a piece of software you simply can install.
If there's no USB host controller in the Hardware you can install whatever you want.
If it can NOT be done why do some of you say IT CAN BE DONE ???
I think it could be done because frankly people are always seeming to make hardware do what it wasn't designed to do.
You need a USB-Host Controller ... Kaiser dont have it ...
Related
after installing a certain prgram..
my fones usb is no longer working!!!
windows dont detect it..
what shall i do?? please help..
cud i flash my ROM using a memory card?
rizortiz
USB doesn't stop working only because a certain software was installed! There must be something else.
and NO, it's not possible to flash via SD card unless it's an image from your own phone.
mestrini said:
USB doesn't stop working only because a certain software was installed! There must be something else.
Click to expand...
Click to collapse
yeah, its true!! what we did is install a nintendo games emulator and it
did stop.. after a reset, the radio rom isnt working anymore..
the unit is no longer detected in other computers too..
rizortiz said:
yeah, its true!! what we did is install a nintendo games emulator and it
did stop.. after a reset, the radio rom isnt working anymore..
the unit is no longer detected in other computers too..
Click to expand...
Click to collapse
I know this is obvious, but did you try to uninstall the emulator?
rizortiz said:
yeah, its true!! what we did is install a nintendo games emulator and it
did stop.. after a reset, the radio rom isnt working anymore..
the unit is no longer detected in other computers too..
Click to expand...
Click to collapse
Ahhh, the radio isn't working maybe because you messed up the RIL.dll which is also needed for RAPI communications.
I think you must flash a new ROM via bootloader to get things they were before
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Everything is fine for me, are you sure that you flash the rom correctly as ordered ?
Sync problem
often can`t detect pda synchronitation . it`s show sync problem . Any way to fix it ?
I told you I don't have any problem which mentioned may be you have to reflash your rom, and start from the beginning.
Or first, you can delete your pairing connection with the pc, reinstall your active sync. And try to pair again. If you said "often", I hope this is not because of your hardware problem.
make sure your device is powered on ( the back light is on)..i also get it some time (only if i shut it by pressing Power Button at top)
Himalaya's USB Port is allergic to hubs
Don't try to use an USB Hub to connect the Himalaya to your PC. Always use a direct connection. This solved the problem for me.
...
Hi,
urbstar said:
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Click to expand...
Click to collapse
Got exactly the same problem, since upgraded to WM6 (Tofclock Fresh ROM) Activesync never finds the PDA. Tried really everything possible, doesn't work. But 'cause there are some beautiful tools like WM5Storage or PIMBackup I don't care about ActiveSync.
May be its - as mentioned here - the USB Connection over USB Hub. But it's an internal one in my case so I can't proof.
And I don't think that the workaround for this problem is a ROM-ReFlash 'cause everything else works fine.
So long
HonkBB
i have same sync problem
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
i have reflashed 4 times now and still no good.
any ideas???
newquaymarc said:
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
Click to expand...
Click to collapse
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
stupiddog said:
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
Click to expand...
Click to collapse
cheer for reply but no cradle connected direct to my laptop
gonna have to go back to 2003 se till i hear of solution
shame xda runs great with wm6
I just want to ask you about active sync which version did you use ?
selangkahlagi said:
I just want to ask you about active sync which version did you use ?
Click to expand...
Click to collapse
thanks for replying
im using active sync 4.5 with xp pro all has been ok till this upgrade
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
selangkahlagi said:
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
Click to expand...
Click to collapse
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
newquaymarc said:
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
Click to expand...
Click to collapse
If you had old splash screen, big possibility you didn't do the last step
selangkahlagi said:
If you had old splash screen, big possibility you didn't do the last step
Click to expand...
Click to collapse
i did do it but dont think it ran correct, is it ment to run on 2003 se?
newquaymarc said:
i did do it but dont think it ran correct, is it ment to run on 2003 se?
Click to expand...
Click to collapse
did you do this step
hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
hi
yep done all that, NO-YES-YES i think the prep work before upgrade did'nt work..
maybe i need to goto wm5 then wm6, but wm5 was too slow for me to use.
a lot of laptops actually have one set of usb ports that are registered as a powered hub and often these don't really have enough power across all the ports... jst an idea...
active-sink!!!!!!!
hi all xperts,
lemme start with my Thanx to Tof the great and Helmi who have made this possible for the good ol' Hima..
Now i need some help -
I installed this package close to a month back with all instructions point by point.
Activesync was the problem..
Today i thot i'll increase the storage space - ran the unlock and then realised the Hima Doc tool is a exe file and i'll hv to have a valid activesync connection before i can get that worked.
Then i thot, i'll reload WM6.0
Again, started in Boot loader - Got the Serial Screen with v1.06 in bottom, connected my device to run the software -
I'm redoing the flash now - wish me luck guyz!!!!!!!!!!
Hi all,
Some days ago, i was to install TOFCLOCK HIMA WM6. But my i-mate Pocked PC works very slow.
Then try to back to WM2003, but here i has a problem - in the "serial" mode my desctop PC (Windows XP) dont see PockedPC. Same problem i has also with notebook (Windows XP).
Then I restart my PPC and when WM6 starded i seed that synchronization process work fine.
Don't understand, if synchronization worked why desktop PC can't see PPC in the SERIAL mode?
pls help me!
U have to put it in BOOTLOADER MODE..follow the instructions carefully
ather90 said:
U have to put it in BOOTLOADER MODE..follow the instructions carefully
Click to expand...
Click to collapse
Yes, i'm in bootloader mode (RECORD+POWER+ACTION+RESET) and then see text on display "SERIAL".
Maybe WM6 lock USB connection?
Intrested that if i load WM6 as normally - synchronization via USB work fine.
do u see USB at top...Connect cable directly to PC
Why dun you try loading other version of WM6? Maybe it is not as bad as what you think to make you go back to 2003?
yes, i would suggest you to try C_Shekhar's *Fast* WM6 AKU7.0c.R40.P24 at:
http://forum.xda-developers.com/showthread.php?t=332945
Lolz..he wants to switch back to WM2003..not to another installition of WM6
if his device dont show usb when connected he cant flash any rom
personaly i would try another usb port
maybe another pc if need be
ather90 said:
do u see USB at top...Connect cable directly to PC
Click to expand...
Click to collapse
at top? i use standart USB cradle. And later, on XP i see USB device icon (in bootloader mode) near a clock. Just nothing
dark_wing said:
Why dun you try loading other version of WM6? Maybe it is not as bad as what you think to make you go back to 2003?
Click to expand...
Click to collapse
Speed... I use my device 2 year and time to time was flashing new OS (WM2003CE, WM5, WM6) published on this forum.
And I can say that all new WM is not bed. He is more beautifuly, but does not fasted than 2003.
ermoas said:
yes, i would suggest you to try C_Shekhar's *Fast* WM6 AKU7.0c.R40.P24 at:
http://forum.xda-developers.com/showthread.php?t=332945
Click to expand...
Click to collapse
I can't - have an error when try to reflashing
Windows XP can't see PPC...
Rudegar said:
if his device dont show usb when connected he cant flash any rom
personaly i would try another usb port
maybe another pc if need be
Click to expand...
Click to collapse
correct, but same usb port woks fine when WM6 loaded. And ActiveSync works correctly too.
my himalaya cradle had a horrible connector
½ the time the pc would not connect to it
wrigling it about a bit made the connection
so now i use my old walaby cradle it's better
i suspect your cradle is teh culpit too
Rudegar said:
my himalaya cradle had a horrible connector
½ the time the pc would not connect to it
wrigling it about a bit made the connection
so now i use my old walaby cradle it's better
i suspect your cradle is teh culpit too
Click to expand...
Click to collapse
Thanks.
Can i reflashing PPC from SD card?
Many have asked the Same question..but al;as..its possible but No one knows for sure how ??
ather90 said:
Many have asked the Same question..but al;as..its possible but No one knows for sure how ??
Click to expand...
Click to collapse
I guess some of the pioneers (itsme, buzz_lightyear, peter poelman and so on) should know. Buzz is still active on his own forum, haven't seen the others for quite a while. Perhaps dig deep in the wiki, dig up some very old threads, PM them...
yeah maybe..but some one also posted a topic regarding Flashing via SD card on buzzdev..but i dnt think he got the answer
hi, i have a kaiser but i don't know how i can read my sd in usb mode, i installed w5torage but many peaple said me that my phone don't have a usb driver.
Solutions?
Thnaks.
Lilhit82 said:
hi, i have a kaiser but i don't know how i can read my sd in usb mode, i installed w5torage but many peaple said me that my phone don't have a usb driver.
Solutions?
Thnaks.
Click to expand...
Click to collapse
Try CardExport II (commercial)
Ta
Dave
but cardrxport it's no free program!!
Lilhit82 said:
but cardrxport it's no free program!!
Click to expand...
Click to collapse
There's a demo if you only need it once (or to test it works).
It's the only one I've had working.
Other than that your stuck with crappy active sync I think
Dave
ehehheheh...yes cardexport it's ok!! great
EDIT: but for curiosity, is there this driver online? for example a list of kaiser driver..
My m1000 is able to sync but when i put it in boot loader it dont show USB instead of serial. Even the device manger does not show any phone device. So any help anyone?
Hi,
did you try with another usb cable or another cradle ?
Are you using Windows XP or any newer?
I hv tried three cradles and also XP, Vista and W7.And diffrent computers too. but no luck.
The contacts might have decided to not work in bootloader.
??????????????????
flyboy
Did you install activesync 4.5?
aeroflyluby said:
Did you install activesync 4.5?
Click to expand...
Click to collapse
plz read the question carefully.i m able to sync.
krishan2207 said:
plz read the question carefully.i m able to sync.
Click to expand...
Click to collapse
I guess, you use a USB-crandle, not a serial one. You might have a damaged bootloader !?!
muckelmaus said:
I guess, you use a USB-crandle, not a serial one. You might have a damaged bootloader !?!
Click to expand...
Click to collapse
i hv usb one.
take SD Card out and try again!