Related
Guys,
I'm not able to remove any programs via activesync from my wizard.
I can see the programs listed in activesync but I can't remove any of the installed programs; it's driving me crazy!
Please help!
Cheers,
Arne
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
findus said:
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
Click to expand...
Click to collapse
That is exactly the problem; how do I remove a program from my PPC?
Because via Activesync doesn't work.....
The program I like to remove is minimo (mozilla for PPC's)
Thanks!
Have the same problem, Windows can not delete programfiles. When i install an update of a program, the setup failed. If i delete files manualy i can install the update. Had the same problem with original rom.
hellejoep said:
findus said:
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
Click to expand...
Click to collapse
That is exactly the problem; how do I remove a program from my PPC?
Because via Activesync doesn't work.....
The program I like to remove is minimo (mozilla for PPC's)
Thanks!
Click to expand...
Click to collapse
Try....
Start > Settings > System > Remove Programs.
This should do what you are after.
my dear friend thats the problem....by doing any of the above i cannot uninstall any programmes ...it say cant remove programmes but do u delet it from your list of removable progrrames...funny
Same here. Minimo would not uninstall
went to remove prog. it said it did but all it did was remove it from the remove programs list.
Hard reset here we go. Pocket mechanic was the same for me.
It's ok when you exactly know where the program is installed - you should simply delete its files. But how can I upgrade to .NET CF 2.0?
Installer can't remove previous version and I can't delete files manually cause I don't know what files to delete :-(
I've had the same problem trying to remove minimo and the Atomic Cannons Demo. :? So far these are the only items I have tried to uninstall. I just deleted the folders and shortcuts, but I'd rather figure out what's causing the problem!
Running the QTek test ROM (WWE) on a US Tmo MDA.
I also have that. however most of the time it works for me to soft-reset and then remove. for some reason that works (for me)
I would recommend a soft reset just prior to removing software from a WM5 PPC. WM5 only minimises most programs instead of closing them when you click the X so the application stays open therefore files are still in use which prevents a successful removal.
Even if the progam has been closed by Start>Settings>System>Memory>Running Programs or a task manager like in SPB Pocket Plus there is a chance that there are still associated files locked open unless a soft reset is done before uninstall. Windows Applications on the desktop will normally prompt for a restart after uninstall if files were in use however it looks like the majority of Windows Mobile apps (or Windows itself) dont have the same functionality (some Mobile apps do prompt for restart but not very many).
Also, apps with today screen plugins should be disabled, before a soft reset then uninstall the app as WM seems to lock the files open when active on today screen as well.
I havent had the uninstall error once since i have done a soft reset before uninstalling any software, hopefully others will have the same success. I know this wont apply to every situation but so far so good for me. :wink:
Cheers
Chris
Puckster is right.Run your task manager to see all runing programs and close them before trying to uninstall or simply soft reset prior to uninstall.It works without a flaw.
Anyone managed to install gmail.jad from gmail.com/app on Kaiser?
I've tried 3 different jvms - to no avail... Results in error messages saying the .jad is invalid. Kaiser not supported yet?
do you have a midlet manager installed?
install the attached file and then try to install your java based app.
grandpareza said:
do you have a midlet manager installed?
install the attached file and then try to install your java based app.
Click to expand...
Click to collapse
Thanks man,
Of course I do, I tried 3 different ones: Intent, IBM MIDP 2.0 and Esmertec JBed and none of these worked. Those were the midlet managers that gave the error messages actually...
Just tried your version of Esmertec JBed, and I WAS ABLE TO INSTALL the gmail.jad midlet with the help of it! Still it won't run for some reason though... Guess I gotta do some more digging...
Thanks!
Have you made any progress in your search?
I had a similar issue with the IBM MIDP a while back, so I'm interested to see if how you've fixed the problem.
Do you happen to use Dutty's ROM?
I just installed this one to test and it worked for me on my Kaiser.
http://el8.org/gmail.jad
ROM: NoThrills WM 6.1 WWE *English* V3 - The first ROM with the brand new OS build 19202!
http://forum.xda-developers.com/showthread.php?t=379411
Esmertec Jbed Build ID 20080222.3.1
you, sir, are a genius
where did you find that jad file???? i've been looking for a version of the new gmail applet (1.5.0) that would work with jbed and i couldn't find it ANYWHERE.
i have no idea where you got that file, but please accept my sincere thanks!
Your welcome. I did a search on Google for the following: gmail.jad
I found the link for that file on the last hit of the first page of results.
I can confirm it works on a Mio Digiwalker A501 as well
thx!
i cant install GMAIL applet. it asks if i want to install the unsigned applet but neither YES, no NO Buttons work.
Try this one
what does JBed3dMod_RU_FIX.zip do?
it installed.. just needed internet connection
can't find application
Hello! I successfully install the gmail.jar file and it runs quite well on my htc touch cruise. My problem is that after I close the application I can't find it anywhere in my file browser. The only way I can restart the app is to chose to reinstall the cab file, and then cancel the installation. After that it puts me to a folder called "Java" and there I can see the app and able to start. I think I should run Gmail through the previously installed the Cloudyfa_EsmertedJbed but I'm not able to find where it is installed on the device. Not even the search function is able to find it. Forgive me for being such a lamer and please help me !
qiuness said:
it installed.. just needed internet connection
Click to expand...
Click to collapse
What did you do to fix this? I've tried multiple times to install the Gmail application but it can never connect stating that it needs a Data Connection.
Mine just is stuck on "loading".... too bad because it used to work. I am on a kaiser as well.
ranger47 said:
Mine just is stuck on "loading".... too bad because it used to work. I am on a kaiser as well.
Click to expand...
Click to collapse
co-sign, same here. Any ideas?
i use it all the time on my kaiser with no problems.
goto gmail.com/app in PIE (only works in PIE) and follow the instructions. It auto downloads an appropriate jad. Has worked every time for me, regardless of rom (currently Dutty's 29/04)
It installed perfectly fine for me thru PIE, however (for the guy that couldnt find the install location programfiles>java>Gmail)
but it wont connect, cant seem to get into any settings or anything either.
Was hoping this would work better then setting up gmail thru the mail client, when looking for certain emails w/ attachments and ****, the regular client doesnt have enough options.
Anyway anyone else get this weird need data connection error?
Obviously i have a data connection.
siemi1 said:
Try this one
Click to expand...
Click to collapse
I was having lots of problems installing and then it would get stuck on loading. I used this jbed and it now works perfectly! thanks. I uninstalled the old one. I did some searching and didn't get a good answer - is there a way to hve multiple instances running?
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
i get that issue every now and again. I usually have to either use a different file explorer or do a soft reset and try again.
Thanks for sharing
i have found the solution finally
the current ROM doesn't support the CAB file i was installing,
i needed to do the following:
remove the SD card
reinstall the compatible ROM which support the CAB file
i hoop it it heps other they may had the same issue
reinstalled rom...
still problem continue
has a other solution?
I recently had this problem when trying to install a couple of CAB files. It appears that something was running that the CAB was trying to update. So, for example, I was trying to install "Inbox Extender" and POutlook (and/or tmail?) was running. Once I killed that, I could install the CAB.
CAB won't install suggestion
I saw this with several cabs that I ran using Resco Explorer and I had Kaiser Tweaks set to not delete the cab after install. The solution was to deselect that setting in Kaiser Tweak, ket a fresh (never run) copy of the cab file and run it using the generic file explorer. It has worked every time since then.
Acert_Arb.cab is no more working
NightStar404 said:
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
Click to expand...
Click to collapse
hello buddy,
Microsoft has made ACERT_ARB.CAB for limited time I think so. Now Microsoft has decided to claim $ for their OS windows mobile. They are working with www.penreader.com
ACERT_ARB.CAB is no more working.
visit this for more information:
http://social.microsoft.com/forums/.../thread/fa78dad9-7ede-472a-af0b-1f8dddaf7900/
http://www.penreader.com/pocket-pc/arabic/Language_Extender_Arabic.html
I cant install anything, .exe, cab, nothing. Please help!!!
I also can't install and run any .cab , .exe or haret. help us
I have Tytn II with L26_Kaiser_Diamond_V5 (Hybrid 3.29.707) Rom.
Installed Calligrapher 8.6 and unable to select either writeanywhere or writepad from the SIP menu or by anyother means. In short after installing calligrapher and softresetting i am not able to use it.
Can anyone please help
Don't know if it will work or not but, you might try installing the Default_IM_WM5.cab or SipChange.cab and see if one of them will let you select it.
no success
^^ Solution -- not working
Assuming-
1. you installed with the desktop loader EXE
2. you had an active ActiveSync session and your phone was properly connected and
3. you selected to have both Write Anywhere and Write Pad SIPs selected when finalizing install to PPC
You should have entries for both in the SIP and a folder under programs with the EXEs. If you cannot find any of this you haven't properly installed the program.
Reconnect your phone and make sure you have an active Sync session, run the setup EXE from your desktop and follow the instructions that appear on your screen. (See pic)
Yes of course
The program was installed from the desktop pc and softreset was done. Both writeanywhere and writepads are installed and it is shown on the list of SIPs (when we click small arrow near the keyboard icon) but unable to select them. I am able to access the options menu of calligrapher from Start>settings>system>calligrapher.
ok now do this
http://forum.xda-developers.com/showthread.php?t=301433
Please see the image
boomermax
I had done that yesterday itself but the problem is menu showsup faster but unable to select writeanywhere or writepad.
so basically I've been no help at all...LOL
I'm sure you've uninstalled and reinstalled and have probably have redownloaded a fresh copy and tried installing that...
what happens when you select it from programs? Nothing?
Reinstalled
Reinstalled few times, when i select from programs nothing happens adn i don't know is it the problem of the L26 ROM or Windows 6.1 or the Calligrapher 8.6 --
if some one can help i will be grateful
Earlier also there was some problem without a solution for someone
http://forum.xda-developers.com/showthread.php?t=353077
try disabling the cube if you have it. I had this problem with transcriber, worked after I disabled the cube.
NO CUBE
I don't have cube but transcriber is working perfect only i have problem with calligrapher
still probably no help
have you tried having the installer remove transcriber from SIP during install?
Yes of course
Even without transcriber calligrapher will not work.
what if you tried this sequence and substituted calligrapher for the keyboard install?
http://forum.xda-developers.com/showpost.php?p=2271142&postcount=692
Phatware states calligrapher doesn't play well with third party apps that affect touch screen behavior and that is probably the problem here
not yet
^^ done without success
posted in another forum in reference to SIP troubles and Calligrapher...
"The main difference between CalliGrapher 8.6 and all previous versions is that it has been compiled with recently released Microsoft Visual Studio 2008. It is remotely possible that the new compiler has performance issues, but we have not heard anything about this and have not seen any evidence in our internal tests. The only difference that we’ve noticed when using the new development tool is that size of the compiled binary files slightly increased.
We will continue testing and will post additional information if we have any. "
Maybe trying previous version might help.
Also, taking the logic from this thread http://forum.xda-developers.com/showthread.php?t=398091 it might serve you to start from scratch and reload ROM then tackle this calligrapher issue then move on to loading other applications.
Partially success - Hard reset
I have done a hard reset.
installed first the calligrapher 8.6
soft reset
installed default_im_cab
changed sip through default_im_cab as writeanywhere
soft reset
Now writeanywhere is available and working in all applications except for Lexisgoo dictionary 3.1.1
Any help or suggesstions?
I've been trying to install Internet calling on my diamond, while I managed to get the VOIP working using the WM6VOIP (ftp://xda:[email protected]/Hermes/WMXL_Support_Files/WM6VoIP.CAB) cab file and SIP Config, another problem showed up. I have tried even the last WMVOIP+SipConfig CAB package with the same results
The moment I install the WM6VOIP cab, the internal GPS function goes dead - it does not work anymore. Soft reset will not fix the problem.
It took me 3 hard resets to figure what exactly was causing the trouble
I guess the WM6VOIP cab overwrites some system files and/or registry settings vital to the GPS Receiver
Is there anyone who had the same problem or anyone who tried to enable Internet Calling on HTC DIAMOND. Any solution to this?
Same here
I had the same problem. Hard reset to fix it.
Something in the VOIP installation makes the GPS invisible to any app which tries to use it. Even the QuickGPS app would not work.
Too bad...I would love to have the VOIP option..but not over GPS.
same problem here
So THAT'S why my GPS stopped working! Jeez! I think we need a new CAB of VoIP software from WM 6.1.
EDIT: Has anyone tried this one?
http://forum.xda-developers.com/showthread.php?t=401608
adamz said:
So THAT'S why my GPS stopped working! Jeez! I think we need a new CAB of VoIP software from WM 6.1.
EDIT: Has anyone tried this one?
http://forum.xda-developers.com/showthread.php?t=401608
Click to expand...
Click to collapse
Nevermind. That one breaks GPS too and can't be uninstalled. *sigh*
same here... did you installed it manually or by a pack (containing sip config tool, gsm codec, bass fix and internet calling) ?
I installed the pack... and my gps died... but not on my HTC trinity.
Someone should install all the packages manually, one by one , and see how it goes.
Please post your findings.
Unfortunately I'm in the same boat :-(
daren1 said:
I had the same problem. Hard reset to fix it.
Click to expand...
Click to collapse
But I found solution:
Rename in windows directory following files:
\Windows\dnsapi.dll
\Windows\ipdialplan.xml
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
\Windows\ringback.wma
Delete all registry changes made by instalation which is described by author in post #66 in http://forum.xda-developers.com/showthread.php?t=401608&page=7, reset diamond and if you want you can delete now files which was renamed in previus step.
After that go to settings->System->External GPS->Access and remove tick from "Manage GPS automatically". After that confirm with OK and go one more time in the same place and turn it on "Manage GPS automatically". I'm not sure that this change are nessesary, but now I have working GPS whitout hard reset.
Hi, i've got the same problem after installed wm6voip.
Folowing philipZ post, i've just renamed
dll files with total commander(hidden files) and reset diamond, the gps worked again
I've not tryied voip anymore....
Just Renamed, no registery changes:
\Windows\dnsapi.dll
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
http://forum.xda-developers.com/showthread.php?t=415262
tof42 said:
Hi, i've got the same problem after installed wm6voip.
Folowing philipZ post, i've just renamed
dll files with total commander(hidden files) and reset diamond, the gps worked again
I've not tryied voip anymore....
Just Renamed, no registery changes:
\Windows\dnsapi.dll
\Windows\rtcdll.dll
\Windows\voipphonecanvas.dll
Click to expand...
Click to collapse
I'd like to rename that files but I can't ! I use totalcommander but when i change name, nothinghappens and the ile get its name back !
Please help !!
Thx !
how to rename dll files
hi guys, like wanabo, i cannot rename any ROM file under \windows. i tried to use the default file explorer, total commander and resco explorer...no luck. every time i try to rename the dnsapi.dll file i get the error 'access denied'.
please can someone help?
thank you