Related
I have a XDA II here, It was work fine, but after I tap a file in the Windows folder, then my XDA softreset itself, after the XDA can still turn on, all button is functional, but just problem to tapping on screen, when tap on screen it has on repond (the screen is on).
I also tried hard reset but all data is still here, weird?? I though hard reset will let me go back to the default setting, but it doesn't change anything except the clock go back to Sept 2003.
PH10B
Radio 1.10.00
G 1337.18
D 1.60a00WWE
my problem with the screen is that it can not be alligned, everytime i try the cross goes round and round and it simply wont start. i have tried at least 6 different roms hard reset but problem remains :x :x
I NEED HEPL GRAHHHHHHHHHHH
PDA2 same problem
Hi All,
I have a PDA2 and for some reason tapping on screen stopped working, I tried hard reset too but I cant tap on the screen anymore. Kindly help. PDA is in super shape I have also upgraded it with the latest patch from clubimate but cant tap the screen.
Nothing is broken and it happened while I was typing a note. Pls Pls help
Qamar Bukhari
[email protected]
we should create a club and name it the fellows with the x-screens :x :x :x
Hey guys do something, where are the experts ??? I am sure its just software problem, I installed some software and next morning touchscreen was not working. I didnt dropt the pda.
Qbukhari.
Just a thought, try putting the device into bootloader mode then hard resetting the device.
Also try putting it into bootloader mode, updating the complete ORIGINAL rom and hard reset to complete the install.
Bootloader mode = power button + reset button + action button right ???
I have done so, problem still there
I have replaced the ROM downloaded from clubimate ----- problem still there
I have also tried to replace the XDAII rom ------ problem still there
now tell me where to get the ORIGINAL ROM ??? I am sure if the original rom is inserted it will be working again. btw pug can we talk online ? I am online now
[email protected] (msn messenger)
qbukhari.
hey all, I finally solve this problem, in the hard reset screen, there is menu for me to choose what to do in during the hard reset, like clear storage, registry... and i choose to clear all, then my XDA II is now work fine. (in the hardreset menu the backlight will not on, so it is not visible to find out the menu, also to change the setting use the botton of record, camera & volume button to control the menu.) good luck everyone!!
Thats a relief
Hi kindly tell me how to find that menu ?? I am sure I didnt damage my Alpine its just software problem let me fix it too.
Tell me how to find that menu during a hard reset plsssssssss
qbukhari.
WHERE IS THAT MENU??????????????
Menu ????
Still waiting for a reply, kindly tell me how to access "Clear Storage" function during the Hard Reset
qbukhari.
probably fake trying to make impression :?:
Too Sad
Dear Kabintos,
When you go in the setting/memory it is displayed total 122mb main memory in my PDA2 is this the same situation with you too ?
qbukharil.
The bootloader menu is not, as far as I'm aware, on the Alpine as it automatically detects network frequencies etc. Henrypak mentions XDA II not XDA IIi.
The program memory and so on in the Memory tab is only 122.04MB. Memory is quoted different to how most people think. 128000000 / 1024 / 1024 = 122.0703
The .03MB is taken up with partitioning of the memory to allow for storage etc.
Have a look at the hard drives on your computer for example, a 30GB hard drive is only 27.9GB. It's just how the manufacturers quote storage space, in thousands of bytes. Computers work them out in thousand and twenty fours of bytes.
To be honest Qamar, the more I think about your problem, the more I think it is a hardware issue, not software. If you've recently purchased the Alpine, it will still be under warranty and you should be able to take it back for an exchange. If not try opening it up and removing and reconnecting the ribbon cable for the screen from the mother board.
Obviously you've tried flashing it again, if the touchpad isn't working then you can't get past the screen alignment at the beginning of the ROM installation after a hard reset.
Out of curiosity, if the touch screen isn't working, how did you get to see the Memory status on your Alpine? None of the buttons are defaulted to settings or the start menu.
PDA2 live again
Hi All,
Well well well, here I am back in the game again. It was at the last moments when I was almost ready to send my Alpine for repairs when I got tip from a friend from uk. He sent me a tool to format storage completely.
After reseting the Alpine with reformatted storage the touch screen was back a bit misaligned though, after aligning it once its 100% fit now. How can I thank you my friend ???
Cheeeeeeeeeeeeeeeeers !!!!!!!!!!
qbukhari.
gbukhari pls send it to me m8 pls pls and ill thank you as you were thanking your firend that send it that to you :lol: also i wanted to ask you if you test really hard your machine after that in case it would do the same thing again
my email [email protected]
Can someone post a 100% tried and tested solution to the tapping problem?
TIA
Yeah...!
Can someone please post some instruction on sortingthis issuse out....
Lossing sleep over the thought of having to replace my screen.....
Cheers,
-R
Hi everyone,
I had exactly the same issue with my XDA2i about a week after I purchased it (around 3 months ago). I was happily browsing the web over wifi around a friends house when the screen locked. I had to hard-reset to get it up again but it got stuck in a loop whilst aligning the screen, it wouldn't go past this stage at all.
I phoned the online shop I bought the device from and they told me they had had lots of people reporting the same symptoms and that they had identified a faulty batch. I was sent a replacement from a new batch about 4 days thereafter. The new one has worked fine ever since.
If it is a software issue that's fixable, great, go for it. But if your device is still under warrenty I'd suggest getting a replacement - worked for me!
Sorry I can't be a bit more posistive but thought I'd let u all know.
*server duplicated post*
this sucks!
From yesterday to today the failure got worse. Now the touchscreen doesn´t accept any input any longer. Made soft reset and hard reset nothing helped. When I bend down two edges of the case gently the device accepts that as an input in the top right corner and opens the taskmanger, with some luck I can use the touchscreen after that for a few clicks and then I can´t make any inputs again. Via active sync and MyMobiler I can do everything with the device so it has to be the touchscreen.
Anyone who had such a failure too?
Any ideas?
Had that problem as well , found it was down to batti , removed it , and the problem was solved , have found though if you install everything you want the phone can slow down , but by using sprite backup and then a hard rest ( then putting the back up back to the phone ) it runs as fast as it was before the apps were installed plus there is more memory as well on the phone , think some apps and games leave some temp crap which hogs down the phone
but after a hard reset batti was gone but the not malfunction?!
could it be an issue of the screen protector? did anybody had some problems with that?
Using the most recent batti AND a screenprotector, and I have no problems at all.
then it has to be a hardware malfunction. think I have to send it in...damn
from several days ago whem i touch in diamond icons never select the one i touch!!!... It selects the icon on left or right but never the right one....
When i have a phone call i select the green icon and it turns the phone off
What can i do?
I aligned the screen thousands of times, i installed the different calibrators and nothing.
I align screen, it works well for a few seconds and becomes crazy again. I soft reset, a tried everything i remember and always the same.....
Obvious question: Did you Hard Reset?
Try a hard reset.
If that doesnt work then it sounds like the screen is screwed, get the unit swapped.
I've just installed a new rom! I think i have to swapp the unit
The problems are the same. Anything more i can do??
If you just installed a new ROM, did you do a hard reset? To me it sounds as if the calibration for the touch sensor is off. The first thing that you do after a hard reset is calibrate the screen.
So you can try to calibrate the screen, bofore doing the hard-reset.
You can but when you hard reset you just have to do it again
Also, you could check your local optician for any additional problems.
No, but honestly, a hardreset and recalibration should fix the problem. I'm aware that GNes/GSen can give some problems if it thinks it has rotated the screen, but I've never seen that occur outside programs that don't rotate the screen by themselves.
If that doesn't work, Sync it, back it up, whatever you want to do, possibly flash to stock and return it to whereever you bought it/HTC to get it swapped.
thank's everybody... I tried it all and the same. Going to swapp
have the same problem.. it wasn't there before, had the phone for 3 month.. i think it has to do with water under the screen, used it in the rain and then it began to behave this way (due to the big speaker hole maybe?) , it works fine otherwise! Any idea how to fix it? waterdamage? - guarantee or what?
I think it´s wierd if you can´t use it when it´s raining..?
joel78 said:
I think it´s wierd if you can´t use it when it´s raining..?
Click to expand...
Click to collapse
How many phones can be used risk free in rain?
i don't think that's the problem. no water in my phone, rain or other....
i think it started after gsen installed...may be wrong, or else or.....
Very little chance Gsen having anything to do with it. Many people are using that (including me) with no ill effects.
Hmmm, I though I was the only one with this problem. I'm on the second unit now, the first one always do soft reset by itself after every few wake up. Now the alignment always gone off after few minutes of use. I'm waiting for the replacement unit now.
Initially I thought it was because of the ROM update I did, but even after I restore the original ROM, it still happen.
Looks like I'm quite unlucky with the Diamond .
problem solved!!!!
gone to look for assistance.
After 3.30 hours new touch screen and they sad to me new components inside.
For now all good. Till when??....
hope it was the last problem
So its a guarantee issue? - bad components inside?
It still works ok, so i wait to send it away..
till now all ok.
Hello guys,
I got my new X1 few days ago, and today when i woke up i found out that the screen is not responding to touch...the stylus does nothing. I attempted a hard reset, but I can't align the screen because the stylus still does not work.
I managed to go to today screen and the mouse is working perfectly but touching the screen is not working at all, even through alignment.
No apparent cause to that.
Any idea how to fix this issue?
Thank you,
Try doing a reflash (with the generic ROM so that u won't lose the warranty)
If that doesn't work...i'm affraid there's nothing left to do but go and replace the touchscreen (it's still in warranty isn't it)
Sorry pal
Oww, sounds like a bad problem. You should indeed try a hard reset (though from what I see you've already tried).
If that's a no-go, it's warranty time. I guess you got unlucky. Good luck patching it up!
You can try installing X1 SoftTouch which will max out the responsiveness of your touchscreen in the registry without having to calibrate. I'm not highly optimistic it will work in your case but it won't hurt to try. The .cab is here:
http://forum.xda-developers.com/showthread.php?t=485037
Well guys,
you will never believe it, i read in a forum that some guy faced the same problem with another WM device and he moved the battery and left it overnight and the second day the phone was alive again.
Guess what? I did the same and amazingly it worked.
By the way thank you (ring-bearer) for the cab file, i installed it and it has improved the touch responsiveness.
Touchscreen Fixed
Hi Thanks for that. I tried the take the battery out and leave it over night trivk and it worked for me to! Brilliant! Upgraded the touchscreen with the cab file to - all good. Thanks again.
for me this trick (remove the battery for one day) doesn't work.
also i changed the touchscreen but no results.
maybe the problem is somewhere else
Hello. Yesterday morning when i woke up suddenly my touch screen did not respond any more. I try reinstalling windows or hard reset but now i can not even get over tap the screen.Please help me. You already helped me once when i was going to throw it away because i thought it's a hardware problem and it was a software one.
What you need to do is fully charge the phone, run a backup usin PPM or sprite then do a soft reset and leave it for a day, if that doesnt workt hen run a hard reset and it will fix it, been through that problem too a couple times and it ends up workin fine
Thank you
Thanks a lot. but please tell me when you say to leave it for a day i should leave it with baterry in or out. Or do you mean to do the soft reset and leave it for a day to the screen where it sais to tap the screen. And by a day you mean 24h?Thanks again anyway
Ok.But where can i find a new lcd? And how much is it one?
I did the soft reset and leave it for a day then it worked but when i wanted to charge, it happened again and i have the same problem now.Any way a thing it's certain it is a software problem.If you have other advice please help.
another problem
I tried installing lots of roms hoping it will be fine. but now i installed a 6.1 version of wm and when i try installing wm 6.5 it stopes in loading screen and the pc gives me an error conection.What about this?
i flash the ori rom n change lcd n ribbon but still cant do the alignment on touch screen n get into the menu try the board n put it in another p4550 still cant touch screen,is it board problem ?
i have the same problem
i think its a hard problem i try everything but nothing
Hello I had the same problem.
I installed several versions of Android and nbh files.
The problem occurred with versions nbh for Froy version of Android.
As I had saved the versions that were tested. I tried to install previous versions where I knew the touchscreen worked correctly. In my tests with this file to the touch screen work again: kaisimg-panel2-320-24-05-10.nbh
I hope that helped
I had prob woth touch screen and non functional front camera. Restored function by replacing flex cable. This flex cable has the buttons for the keypad as well as supporting the front camera. When I examined the flex cable, the portion that moves in and out when sliding the keyboard appears to be slightly damaged on right and left sides. The damaged portion does contain very thin circuits.
Not sure why this was posted in Accessories but I'll move it to General for you.