Hello Dear Sir's,
Do I have a HTC Touch Diamond with a software mistake however to recover I do believe me to need of a ROM original for this HTC anybody could help myself to recover this apparel?
I will be very grateful for that...
You need to post this in the Diamond ROM development section.... and a simple Hard Reset will do the trick you will need to search to find how to perform it....
Related
i have a htc p4350 dead by flashing by wrong rom
i try now to repair it using rom found in xda-developers but it show me
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
any solution to repair
use the correct RUU version?
but seriously, we need more details, especially about your phone (HTC P4350 or wing/terra/you get the idea? IPL/SPL). also, what rom were you trying to flash?
here information about it
htc : hera100
ipl 1.08.0001
spl 1.08.0001
this is another herald bricked case
if u perform a search, you'll find "there's no solution"
if u try to ask mods, they dont give you answer or solution
so.. apparently there's no solution!!
tramuyo said:
this is another herald bricked case
if u perform a search, you'll find "there's no solution"
if u try to ask mods, they dont give you answer or solution
so.. apparently there's no solution!!
Click to expand...
Click to collapse
are u sure ??
well.. try to contact Olipro.. I think he can help you
for a $$$
what rom were you trying to flash? is it a custom rom or an official RUU rom? RUUs can be flashed with an SPL lower than 4 where as customroms cannot and must not.
i have tha same proplem please can any one help us
tramuyo said:
well.. try to contact Olipro.. I think he can help you
for a $$$
Click to expand...
Click to collapse
Hello Tramuyo,
everytime I open my desk drawer I see my Terra-Brick, am I getting paranoid about this pain or does it seem to me that you know something?
I was checking your last posts and it seems to me that you know a lot about this whole Cid-Lock/ Brick thing. Am I right, that with this Tool that maybe exists it should be possible to recover any device?
And, btw sorry to bother you with those damn Terras....
well, i just doin research. Im like yours
playing with htc herald and tapping keyboard with Invalid Certificate thingy and that stuff
Ive talked with Olipro and he says that *maybe* he have a solution for that
tramuyo said:
well, i just doin research. Im like yours
playing with htc herald and tapping keyboard with Invalid Certificate thingy and that stuff
Ive talked with Olipro and he says that *maybe* he have a solution for that
Click to expand...
Click to collapse
realy i have this proplem and need soluation for this
yes me too...
always invalid....
how to make my hera 100 alive again ??
please give me solution... where is the expert ??
helpppppppppppp
i have same problem
and i do evry thing here in forum but no lock
what we can do
to slove this problem
Contact Olipro for more information... Herald HAVES recovery!!!!
I Send To Him But Still No Luck
update from sd card
your phone has to be hard unlocked.
what can i do i have the same proplem and how to make hard unlock
search gold card !
and good luck!
Hello,
I downloaded on my AT&T Fuze with stock ROM this program Diamond TF3D Config Setup v0.6.7 (2) to tweak the Touch Flo 3D i installed it and then i restarted it.
On restart it says an error message that shell32.exehas a problem and it wont work at all! It freezes!
Please help me....!
Please I dont know what do know...
Please please help me...
I dont know what do...
Options:
1. Install hard-spl and flash custom rom via Bootloader mode
2. Flash stock att rom again via Bootloader mode
(Search bolded words)
did hard reset after panicking
thanks for ther apid response!
you wanna see a magic trick?
I recently flashed my opal to wm 6.5 and it worked perfectly fine. Yet today when I tried to install a software which would help display chinese character, after reboot, it got stuck in the smart mobility screen. I have tried hard reset and it didnt work. HELP ME!!!
Try entering the bootloader, plugging it in, and on a PC, flash the stock ROM back with the RUU. And for future reference, questions should be posted in the Q&A forum or in you device's relevent forum instead of here, as Development and Hacking is reserved for the development of software.
Dave
try this ...
if you can't enter boot-loader, and obtain a regular active sync connection (in order to reflash) you must try to flash from your sd card.
here you will find some instructions for htc Polaris (i own one) but you have to search the forum how is that to be done for htc touch opal.
it should be something similar there for your opal, and this worked for me in the same situation on my polaris.
good luck !
Hi to everyone
please help me to fix my Dear X1
for first time i decide to install a wm6.5 rom (FINAL 006 ROM - 015 - 7-1-2010)
i hard spl my x1 and install new rom with X1_CustomRUU and USB cable
when installation finished i see this Error and i can't close it
Error :
Code:
Install
\windows\76_themePack2.cab
failed, code=0x80004005
Try hard-resetting your phone.
If you still have the problem install another rom, using the SD-Card method
a.
vahid67 said:
Hi to everyone
please help me to fix my Dear X1
for first time i decide to install a wm6.5 rom (FINAL 006 ROM - 015 - 7-1-2010)
i hard spl my x1 and install new rom with X1_CustomRUU and USB cable
when installation finished i see this Error and i can't close it
Error :
Code:
Install
\windows\76_themePack2.cab
failed, code=0x80004005
Click to expand...
Click to collapse
rom specific problems are best asked directly in the rom thread, where other users might have encountered the exact same problem and are able to provide quick help or you just find the solution yourself via Search...which is a mighty tool indeed
opening a new thread for every q&a doesn't help keeping the forum in order
alperyasar said:
Try hard-resetting your phone.
If you still have the problem install another rom, using the SD-Card method
a.
Click to expand...
Click to collapse
i try hard rest but problem not solved
buy new phone
dude what kind of reply is that? 'buy new phone' if you want to help him then post something helpful man what if this was your phone, that would be the last thing you would think of...
Tend to agree with DrakenKorin above. No need for another thread. Ask your query in the specific rom thread where others may have encountered same issue
Thread closed
Hi all.This is my first time visiting this forum.I hope you can help me.
I have a htc touch pro2 and it is in german language.Can you please find for me a WM 6.5 for it because i want to upgrade it in english.I have HardSpl and Active SInc but i only need WM6.5.
I tried to download it in htc official page but it requires a S/N and when i put my S/N it says it is a wrong S/N.
Could you find for me a WM6.5 to download without requireing a S/N.
Thank you.
If you have Hard SPL installed, then flash any one of the custom ROMs in this forum.
I`m sorry but i didn`t understand.Can yoy explain to me please what do you mean?
Look I want to do this with my htc touch pro2:
I read this somwhere and I want to upgrad my HTC in this way also.
As you can see this is for HTC touch pro not for htc touch pro2 but someone said to me that it is the same work process.
hello
i have 1 htc touch pro in hand..
phone is in german languages and i want to change laguages to english...
any1 can help me to do this?? is it safe???
btw this link is a safe instruction??
So let’s say that you live in Taiwan and want to buy a fancy new HTC Touch Pro smartphone. You’ll quickly learn that in Taiwan you can only find the Chinese version of this phone. Importing a European version is expensive, plus you won’t get any contract signup discounts. US phones use provider-customized firmware that may not work correctly or optimally in Taiwan.
Don’t despair. There’s active communities of HTC enthusiasts who have extracted HTC firmware in English and other languages. It’s a fairly simple process to change the firmware on your phone, but the documentation is slim, so it’s difficult to know where to start. Here’s a simple guide on what you need to do. Each page referenced has additional information if you need more detail:
1 ) Download and install on your computer the English version of ActiveSync from Microsoft: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx (http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx)
2 ) Turn on your phone and connect the USB cable that came with the phone (aka the charging cable) between your phone and computer and set up the phone to sync. You don’t need to actually sync anything yet, you just need to get ActiveSync on your computer to say it is “Connected”.
3 ) Download to your computer and extract RaphaelHardSPL-Unsigned_1_90_3.zip from here: http://forum.xda-developers.com/showthread.php?t=410150 (http://forum.xda-developers.com/showthread.php?t=410150). Normally you can only install ROM firmware versions intended for your version of the HTC Touch Pro. HardSPL will change the SPL firmware to allow any HTC Touch Pro ROM firmware to be installed.
4 ) Make sure your phone battery is more than 50% charged or the SPL and ROM firmware will not install.
5 ) Run RaphaelHardSPL-Unsigned_190_1_3.exe on your computer. Follow the prompts in the program to start the SPL upgrade. After the upgrade starts there may be an inquiry on your phone’s display asking permission to switch into the bootloader. Press “是” (yes). Do not do anything on your phone or computer until the installer says the process is completed and your phone has restarted. (Note that it says the firmware upgrade takes up the 10 minutes but the SPL is small so it will be much faster.)
6 ) Download to your computer RUU-Raphael-HTC-WWE-1.90.405.1-Radio-Signed-Raphael-CRC-52.33.25.17-1.02.25.19-Ship.exe from http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs (http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs). At this writing there are newer ROMs there but this one is the stable released version on shipping English phones. (In the future there may be a newer stable release.)
7 ) Run RUU-Raphael-HTC-WWE-1.90.405.1-Radio-Signed-Raphael-CRC-52.33.25.17-1.02.25.19-Ship.exe on your computer. The interface is similar to the SPL upgrade, but this upgrades the main ROM firmware. Again, do not do anything on your phone or computer until the installer says the process is completed and your phone has restarted. This firmware is very large so it will take several minutes.
8 ) When your phone restarts it’ll go through the install process just like a brand new phone. (Your dealer may have done this for you when you bought the phone.) It’ll take several minutes to install the OS and additional software, calibrate the display and setup your phone network settings.
9 ) Congratulations, your Chinese phone now speaks English.
But in step 6 there is a 6.1 WM and i want a 6.5.Is it clear?
Thank you!
Are you using a Raphael (Touch Pro) or a Rhodium (Touch Pro2)?
drilli said:
I`m sorry but i didn`t understand.Can yoy explain to me please what do you mean?
Look I want to do this with my htc touch pro2:
I read this somwhere and I want to upgrad my HTC in this way also.
As you can see this is for HTC touch pro not for htc touch pro2 but someone said to me that it is the same work process.
Click to expand...
Click to collapse
process may be similar but IT'S NOT THE SAME FILE!! you have a touch pro 2, that Raphael file will brick it. you need to use touch pro 2 or rhodium Hard-SPL, not raphael...
Ok i understand now.So i have to download rhodium HardSpl.
I also found this rom:
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So now i have these tools:
1.ActiveSync
2.I have to download Rhodium HardSpl
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So would it work this for me.I mean after i download Rhodium HardSpl will I have a htc touch pro2 in English ?
Thanks for your reply!
drilli said:
Ok i understand now.So i have to download rhodium HardSpl.
I also found this rom:
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So now i have these tools:
1.ActiveSync
2.I have to download Rhodium HardSpl
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship.exe.
So would it work this for me.I mean after i download Rhodium HardSpl will I have a htc touch pro2 in English ?
Thanks for your reply!
Click to expand...
Click to collapse
Hard SPL is what will allow you to flash non-stock ROMs to our device. Once you put that on, then you will be able to flash the ROM you listed as well as any other one you find for the Rhodium.
cajunflavoredbob said:
Hard SPL is what will allow you to flash non-stock ROMs to our device. Once you put that on, then you will be able to flash the ROM you listed as well as any other one you find for the Rhodium.
Click to expand...
Click to collapse
Just one another question.
Now i have these tools:
1.ActiveSync
2.Rhodium-HardSPL_V2_00R3_185HSPL.zip
from here: http://forum.xda-developers.com/showthread.php?t=550131
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
Would it work with these tools ?
And one thing that i don`t understand:
Is there any diference between Htc Touch Pro2 and Htc Touch Pro2(Rhodium) or this is the same thing ?!
drilli said:
Just one another question.
Now i have these tools:
1.ActiveSync
2.Rhodium-HardSPL_V2_00R3_185HSPL.zip
from here: http://forum.xda-developers.com/showthread.php?t=550131
3.RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
Would it work with these tools ?
And one thing that i don`t understand:
Is there any diference between Htc Touch Pro2 and Htc Touch Pro2(Rhodium) or this is the same thing ?!
Click to expand...
Click to collapse
Since we've answered you four times with information relevant to your problem, and you still aren't understanding this, I'm going to simply say that yes, this is correct if you have a GSM version. I will strongly urge you to read up on what you are doing before hand so you don't risk bricking your device.
Rhodium is the model name for the Touch Pro2. If you look under your battery, you will find a model number that says RHODxxx where xxx is a three-digit number. This is useful in telling people here which device you have, as there are GSM and CDMA versions of the device. You have to be certain of which you will flash or you may brick your device.
cajunflavoredbob said:
Since we've answered you four times with information relevant to your problem, and you still aren't understanding this, I'm going to simply say that yes, this is correct if you have a GSM version. I will strongly urge you to read up on what you are doing before hand so you don't risk bricking your device.
Rhodium is the model name for the Touch Pro2. If you look under your battery, you will find a model number that says RHODxxx where xxx is a three-digit number. This is useful in telling people here which device you have, as there are GSM and CDMA versions of the device. You have to be certain of which you will flash or you may brick your device.
Click to expand...
Click to collapse
Thank You very much.
I have RHOD100 and as i saw in this forum it is not CDMA so it will work.
So i have first to flash rom with HardSpl and after that i have to install
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
I`m sorry for all these questions,but this is my first time trying something like that and i want to make sure that I will not brick my device.I won`t ask anymore for this problem.
Thank You!
drilli said:
Thank You very much.
I have RHOD100 and as i saw in this forum it is not CDMA so it will work.
So i have first to flash rom with HardSpl and after that i have to install
RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodiu m_4.49.25.17_Signed_Ship.exe.
I`m sorry for all these questions,but this is my first time trying something like that and i want to make sure that I will not brick my device.I won`t ask anymore for this problem.
Thank You!
Click to expand...
Click to collapse
You seem to have the order correct. I would recommend that you spend a good amount of time reading about this, though. Make sure to read through the instructions and FAQ of the Hard SPL thread before you attempt it. This will save you a lot of time if you need to ask for assistance.
And finally JOB IS DONE!
Thank you for your help.You`re great hehe.