Database Develop

[wm5.0] resco pocket radio problem

hey there guys, im having problem installing this
http://www.resco.net/pocketpc/radio/default.asp
im using wm5.0 on BA and when i try to install, it says cannot install, askes to try and install on different location, when try either storage or storage card, message comes up saying it wasnt installed.
anyone know if this is a compatability issue, since most/all wm compatable software work on wm5.0 this does not work on mine.
images on the same page, also show that the software does work on wm5.0 but still wont install on my device..... :?

its ok, i sorted it now, i just reset my xda and tried again, it works now!!! 8)

resco
Hi, mine does not work, does it use GPRS to connect or it also uses WIFI?

it uses gprs, i cant seem to get a connection while on WIFI so i havent tried it, but when you set it up, it asks for you to select either gprs of fast/wifi/broadband connection. so i assume if you select your connection type as faster than gprs it would use wifi. 8)

Yes, I initially selected the 2nd of the two bandwidth options when installing and Wifi works great.

Telstra (Aus) WM6 Updater is released

Get it here http://www.palm.com/au/support/treo750/downloads/wm6update.html

ei, were you able to download and install it? I am getting an error message:
Error message:
"update is intended to update the 750 smartphone, it is not intended to update the language"
Error message appears in the computer when running the executable file.
I'm running Windows XP SP2
Option is TRY AGAIN. Same thing happens when you click on TRY AGAIN.
My language setting is set to english. My phone is also set to english....any idea on how to resolve this issue?

I have Version TREO750-2.23-RWE, I was able to download the Telstra release using my serial number, but could only open the zip file with winrar.
When I tried updating, I get error, "This updater only works with Palm Treo 750 Smartphone"
My unit was a replacement from Palm not the original Telstra unit, so I was able to upgrade with the 2.23.
Should I try the Telstra release?
Any ideas

FSB said:
I have Version TREO750-2.23-RWE, I was able to download the Telstra release using my serial number, but could only open the zip file with winrar.
When I tried updating, I get error, "This updater only works with Palm Treo 750 Smartphone"
My unit was a replacement from Palm not the original Telstra unit, so I was able to upgrade with the 2.23.
Should I try the Telstra release?
Any ideas
Click to expand...
Click to collapse
open with wirar and extrac cheeimg and do a mini sd upgrde

I got it to work by editing the payload.xml file, changing the high to 2.23 and the RWE to ROW as these was my version (search the forum for this method)
Now have TREO750-2.26RWE
1.54.31.00
TEL-WM6-026
CARRIER DB 392
I now have all GSM/UMTS selections
Only Telstra stuff I have found is My Place and Telstra Business.

Mine installed without any issues but I had trouble with the download initially from Palm and with unzipping it. (I also used winrar.) I have to say I'm not particularly enamoured with Palm's method of restricting users to one download per serial since I just added one digit to my original serial and it then downloaded fine. STUPID!

FSB said:
Only Telstra stuff I have found is My Place and Telstra Business.
Click to expand...
Click to collapse
...and the worst looking wallpaper I've ever seen! This is what it took them so long to do???

I just updated this over the Palm Generic Three 2.23 ROM and it definitely seems slower, and still unstable unfortunately. I am getting dropped calls randomly, it looks like when a data connection starts in the middle of a call, it will drop the call mabye 50% of the time?
Currently have installed
1. Opera 8.65
2. HTC X-Button 2.0
3. Fring (Latest on webby)
4. Esmertec Java + Skype (iSkoot Java Version)
Configured Services
1. Windows Live Hotmail Push (As items arrive)
2. Exchange Activesync (As items arrive)
Phone is using a 3 simcard, on X-Series Silver. What i might do is run virgin OS with no additional third party software, and just activate push hotmail + exchange and see what happens.
Previously using the generic Palm 2.23 ROM, seemed quite alot snappier, after trying this Telstra upgrade, even though its 2.26, i cannot seem to see any differences in usage, just a noticible slowdown in speed + a few additional icons. HSDPA Connection via BT on Internet Sharing on my laptop seems slower too, may have to try that again at different locations.
Any ideas/suggestions? Maybe i need to somehow edit the NBH so less software get installed? Or somehow have a "msconfig" equivalent to disable some auto startup programs? (Please advise on this for those that know how)
Thanks guys

HyperZ said:
I just updated this over the Palm Generic Three 2.23 ROM and it definitely seems slower, and still unstable unfortunately. I am getting dropped calls randomly, it looks like when a data connection starts in the middle of a call, it will drop the call mabye 50% of the time?
Currently have installed
1. Opera 8.65
2. HTC X-Button 2.0
3. Fring (Latest on webby)
4. Esmertec Java + Skype (iSkoot Java Version)
Configured Services
1. Windows Live Hotmail Push (As items arrive)
2. Exchange Activesync (As items arrive)
Phone is using a 3 simcard, on X-Series Silver. What i might do is run virgin OS with no additional third party software, and just activate push hotmail + exchange and see what happens.
Previously using the generic Palm 2.23 ROM, seemed quite alot snappier, after trying this Telstra upgrade, even though its 2.26, i cannot seem to see any differences in usage, just a noticible slowdown in speed + a few additional icons. HSDPA Connection via BT on Internet Sharing on my laptop seems slower too, may have to try that again at different locations.
Any ideas/suggestions? Maybe i need to somehow edit the NBH so less software get installed? Or somehow have a "msconfig" equivalent to disable some auto startup programs? (Please advise on this for those that know how)
Thanks guys
Click to expand...
Click to collapse
From my experience, 2.23 ROM and 3AU's Radio is the best combination for me so far.

all works just fine for me... im dissapointed that the rom is a down grade from the att rom as far as the wm6 build is concerned...no surprises for telstra though...

reyjabs said:
From my experience, 2.23 ROM and 3AU's Radio is the best combination for me so far.
Click to expand...
Click to collapse
Hey mate
Would you happen to know where i can get them seperately?? Would i just flash 3AU's ROM + Radio then extract the Generic Palm's 2.23ROM NBH and flash using the SD method?
Ive been flashing by modifying the payload.xml file method.
Thanks

now, I am encountering another problem...
was able to see the first page. But when i click on Start update, it would just show me a blank screen....any help?

HyperZ said:
Hey mate
Would you happen to know where i can get them seperately?? Would i just flash 3AU's ROM + Radio then extract the Generic Palm's 2.23ROM NBH and flash using the SD method?
Ive been flashing by modifying the payload.xml file method.
Thanks
Click to expand...
Click to collapse
Flash the 2.23 ROM first then Flash the 3AU Radio only ROM. The 2.23 ROM is here and you can get the Radio ROM(152.30) and instruction here

Well, i put up with using WM5 for the couple of months, and have been eagerly looking forward to the new skinned interface.
Just as i was about to use an un-official flash, Telstra finally released their ROM. Awesomeness.
Tried flashing in Vista, no go. XP 64bit, *almost* happened twice, then it wouldnt recognise my phone. Gave up with some programs, etc, and loaded up XP 32bit.
Flashed with no issues the first time, loaded updates with no hassles, and im now burdening down the phone with all the tweaks and programs i like to put on my devices.
Does anyone know what clock speed this ROM sets your phone to ? These are supposed to be a 300MHz processor in them, but when i ran 0mapclock before, and set it to 150MHz, i saw a major increase of speed. Not sure how accurate the program was, as it never seemed to remember my clocks, but it made me wonder what it runs at stock ... going to try under this OS and see if it works any better.
Edit: BTW, i have a Treo 750

Softick CardExport II/WM5Storage problem with Windows Mobile 6.1

As you might probably knew already, Windows Mobile 6.1 is having problem with USB mass storage emulation software like SoftTick CardExport or WM5Storage.
If you have SofTick CardExport, please report it here :
http://softick-forum.com/viewtopic.php?t=1498
Because if more people reported there it will get more attention.
And I believe (hope) that it will also benefit the WM5Storage (I still remember that in the olden days, we need to install Softick trial version to make the WM5Storage work).

I upgraded my Kaiser yesterday to official WM6.1 and wasn't aware of this problem yet:
infact I've a x51v WM6.1(LennySH Dell Stock Beta 7) and with Card Export II 3.08 I can explore both SDHC cards from my PC-XP.
So the problem with Card Export II,probably,is linked to Kaiser and not to WM6.1

Just curious, but what problem are you having? I am using Card Export II 3.11 with Dutty's 4/29/08 6.1 rom on my Tilt and all seems to be working fine.

Hi, i have a Problem too. When i activate WM5torage, my windows recognize my sd card as a usb stick, but i can't grab on it. My Windows show me the Message "Its not Card in", But it is a card in. Can one help me.
Tnak you

Card Export fixed !!!!!
http://www.softick.com/pocket-pc/cardexport2/
Its now FIXED!! and works great for wm 6.1 upgrades. My tilt is now whacking across over a gig of photo files without stopping for a pause. USB settings DO NOT need messing with nor do any of the CardExport functions.
Install.....and use as a mass storage device. I did not need to play around with any of the settings either PPC or PC end.

great program. was surprised my tilt didnt come with this..

I've flashed about 10 to 15 WM6.1 ROMs and have used Card Export II successfully in every single ROM. I don't think it's a 6.1 problem.

Cooking CardExort II into a ROM?
I have tried a few times to make an OEM package out of CardExport II but have never managed to get it to work. I installed the Application, copied all the files off and did a registry export. I then searched through the exported registry file and extracted all (I think?) the CardExport II entries and built an OEM package. So I have at the moment an almost working package however when the application is launched and you click connect, ActiveSync disconnects OK, then a few seconds later the big button on the Kaiser turns from Disconnect back to Connect and ActiveSync re-connects.
Has anyone sucessfully made an OEM package of CardExport II to include in a ROM?
Cheers
Andy

nicholasendean said:
http://www.softick.com/pocket-pc/cardexport2/
Its now FIXED!! and works great for wm 6.1 upgrades. My tilt is now whacking across over a gig of photo files without stopping for a pause. USB settings DO NOT need messing with nor do any of the CardExport functions.
Install.....and use as a mass storage device. I did not need to play around with any of the settings either PPC or PC end.
Click to expand...
Click to collapse
and what is a serial number???

hi you have written that cardexport work for you,. I downloaded it from your link and installed but it doesnt work and it needs serial number(with any ROM i have tested so far)...how did you fix it?
thx

peto01 said:
hi you have written that cardexport work for you,. I downloaded it from your link and installed but it doesnt work and it needs serial number(with any ROM i have tested so far)...how did you fix it?
thx
Click to expand...
Click to collapse
You could fix it by sending a few dollars towards the developer. Best 15 bucks I ever spent on windows mobile software.
http://www.softick.com/mobile/pocket-pc/cardexport2/

rob.ocelot said:
You could fix it by sending a few dollars towards the developer. Best 15 bucks I ever spent on windows mobile software.
http://www.softick.com/mobile/pocket-pc/cardexport2/
Click to expand...
Click to collapse
What he said.....
I use Windows mobile 6.1 and it works fine for me. They have the best protection on the software I have seen and I believe it still hasnt been cracked. Most people who have a problem with this software are using a cracked version which doesent stay cracked for very long, it then stops working in many different ways IE on the website's FAQ
Q: My Card Export II works fine but sometimes it says that "Wrong usb status returned by underlying driver". How can I fix this?
A: Just do not use cracked or patched versions. If you like Card Export II, consider purchasing it. Card Export II costs only $14.95. After receiving unlock code, remove your patched version from your handheld and install fresh version from our web site. After that register it using unlock code you have received from Softick.
Best app on my phone....

Hello,
my problem is at wm5torage:
when I start a java application it doesn´t work. It comes the error:
"Cant´t switch to Mass Storage USB driver, error 1f. Maybe some programs or plugins run from or have files open on storage card...."
But I have no contact at this time to the SD-Card.
Card Export works at the same place. But it isn´t free, so I try to use WM5torage, because it is free.
Can anybody help me with this problem?
Thank you
Best regards
Mathias Kant

problems since ROM upgrade

I have worked in IT support for 8 years at the desktop support level. I dont understand all but can usually figure things out. I apologies in advance for being a rookie. I am frustrated with this device and need help!!
I upgraded ATT tilt to Dutty 6.1 Build 19700.duttys 6.1 about 1 month ago and Since I did this I have had a lot of problems. Build has all the goodies and more but since the upgrade I cant get any work done because I am always tweaking in an attempt to get the device working properly. I have tried to reset and reflash sevral times to start all over again but I end up with the same issues.
1. Unable to sync with active sync. I have disabled avast anti and I still am unable to sync. I also added port 990 to firewall and no good. I have re-installed active Sync 5 times. It only works when I play with it and then the device does not stay connected. It boots the connection 1 or 2 minutes after sync
2. No email apps or programs work. I tried the java versions and all. Messaging says error synchronizing and gives this message - "cannot cannect with current connection settings. To change your connection settings tap settings" My settings are OK as far as I can see. I purposely connect to media net before opening email to make sure the data connection is present. I had full blown HSDPA in NY city yesterday and no email or GPS working.
3. GPS and GPS upgrade is not working. Does GPS use its own radio? Does dutty upgrade break the radio? Not sure what is happening here as well.
4. No you tube video as usual. This has always been broken and remains broken for me. I tried installing flash bundle, codecs, etc.... No good.
I constantly get prompted the below
"cannot cannect with current connection settings. To change your connection settings tap settings"
Only thing that works is web browser.
Can someone please point me to a good solid working and mostly complete ROM for the US att tilt "kaiser". Maybe this is all I need. I have trouble finding ROM info and whether its current via the site. It gets confusing and I just want to set up once and forget, if you know what I mean. Please provide any links I might need to a fix, rom, tweak, etc..
Please help!
Steve

Steve, I updated to Dutty's ROM a while ago and all worked well until about a couple of weeks ago. I do not attribute my problems to the ROM though but rather the Tilt itself. My first issue was related to no activesync connectivity. My Tilt became an "unknown" device. Looking at my USB port from inside of the battery compartment notice bent pins. I was able to straighten the pins out but only could connect with one of about 10 USB cables that I had around. Once you have loaded Dutty's room I would recommend reconfiguring your connectivity to AT&T. You can download a CAB with all of the configuration setting on this board. Recently my touch screen would freeze up and not work well. I thought it might be the ROM but later found out there must have been some physical problem. Two days ago I called ATT and RMA'd my phone. I recieved the new phone yesterday and configured it last night. All is working well (USB and Touchscreen, new ROM, New SPL and new radio).
BTW last night saw (do a google search - I don't remember where I saw it) a revised video / flash version of TCXXXX software. With Dutty's ROM (and current) my GPS worked great. I use it with a couple of test GPS programs and TomTom on Com4. I also have an external BT GPS and it works well with that. Check to make sure your email is not configured for a proxy or local network connection.
Pete

Thanks Pete, Since this post I have gotten the GPS to work. There is a GPS app in programs\tools that has an enable option. I stumbled across it looking for answers. Ill check the pins on my cable as well.
Dutty's connections wizard actually had the wrong info for ATT america. I had to remove ID and password to get it working for Media Net so I hope the cab you reference is a newer one than is on my tilt.
I am still getting the same message for email. "cannot cannect with current connection settings. To change your connection settings tap settings"
I have to be missing something in the connection settings. I will try the cab, maybe it has been updated since Dutty's build.
Can you think of any thing in the connection settings?? Opera works but email gets error and message to check connections.
Ill let you know how that works.

Here are the essential 3 cab files you need for your Tilt.
1) fixes keyboard
-Install, soft reset, done
2) Sets At&t settings
-install, set up email but do not save your password
then do this
start>settings>connections>connections>advanced>select networks>change both drop downs to media net>click edit on both drop downs and go to proxy settings here you will uncheck everything. remember to do it to both dropdowns.
3) removes hidden proxy (which will allow your email to work if you are using a saved password)
-install, then go to your email set up and save your password.
edit: This will also allow you to update htc weather, quickgps, and a number of other programs without receiving errors.
good luck and have a nice day

HTC Touch Diamond can't connect to Vodafone (Ireland) emailplus

I recently bought my HTC touch diamond on ebay running windows mobile 6.1 and set up Vodafone irelands emailplus (push email) which worked fine for first few weeks.
Now it won't connect
I can connect to internet via GPS no problem and have downloaded software a few times already
I install software and on first run it tries to connect and tells me theres been an unexpected error in connection and asks if I want to try again
I have uninstalled and reinstalled a few times but no joy.... (it can't seem to connect to intiate setup)
Called Vodafone a few times who, apart from doin telling me to do the above and checking I was set up there end, are now saying it's a hardware problem and because phone wasn't supplied by them they can do no more
I don't think it's a hardware problem...
I'd be very greatful if anyone has a fix for this as having push email was one of the reasons for getting the phone