Related
I cannot get ActiveSync to detect my phone.
I get the XP message "USB Device Not Recognized" when I plug in the phone.
I have checked my USB drivers. They are more up to date (2004) than the ones listed on the Microsoft support page listed in the ActiveSync readme.doc
I am running ActiveSync 4.5 on a Windows XP laptop
Windows Mobile 6 CE OS 5.2.1620 (Build 18125.0.4.2)
on an Orange Tytn II (ok, I will flash the rom once I have a working ActiveSync!)
I have tried switching off the firewall on the laptop - no luck.
Changing the in "Enable advanced network functionality" through the 'USB to PC' connections makes no difference.
In the Get Connected Window USB is listed as having status "USB is available" after clicking Next on Checking COM ports (it takes a while).
I have uninstalled and reinstalled ActiveSync 4.5 (obtained from both the CD and the Microsoft web site).
I have done the usual cycle of switching everything off and rebooting (several times).
I have tried all four of the USB ports on my ASUS A6000.
New suggestions for things to try most welcome.
I did have the same problem myself when I first got mine. I also tried turning firewalls off etc. The only method that seemed to regularly work was to reset the kaiser and ultimately a hard reset
i had a similar problem and i found it was because i still had the nokia phone sync software on my pc too .. removing it sorted the problem
Soft reset the device, reboot the pc.
If USB syncing doesnt work, try bluetooth.
Works for approx 30 secs after reboot
I think I have a faulty phone.
ActiveSync works for about 30 seconds after a reboot, as does gps tracking, and then the connection is lost (and gps fixes on the last tracked location). I have tried soft/hard resets, all to no avail.
Unfortunately I bought the phone in London and I will have to wait until I am next in London to take it back to the Orange shop for a replacement :-(
I am having the same issue but I cant get activesync to work at all
I could recognise the kaiser on one PC but not on another, messed around and go it working then it stoped , all along it was mt Firewall, disabled the fire wall never had any more problems with activesync. that was my issue might be something for you to look into
derek-farn said:
I think I have a faulty phone.
ActiveSync works for about 30 seconds after a reboot, as does gps tracking, and then the connection is lost (and gps fixes on the last tracked location). I have tried soft/hard resets, all to no avail.
Unfortunately I bought the phone in London and I will have to wait until I am next in London to take it back to the Orange shop for a replacement :-(
Click to expand...
Click to collapse
I think your phone is ok. ActiveSync always gives all kind of problems.
I sync my kaiser on my desktop, my laptop and at work. For some reason, my desktop had exactly the same problem than yours. I tried everything!
Finally I found something that made it work much better. Go to Settings->Connections->USB to PC and uncheck the option 'Enable advanced network functionality'
After that, I still get some random disconnects, but only happens like every 3 or 4 days.
Hope it helps.
I had this same problem (device not being recognised) but fixed it by connecting the USB directly to the PC not via a USB hub. This makes me think that the TyTN II requires the maximum current from its USB connector to work; a hub reduces the available power; some PC connections may not have enough and this could account for the problems some users are experiencing perhaps??
jmaynard said:
I had this same problem (device not being recognised) but fixed it by connecting the USB directly to the PC not via a USB hub. This makes me think that the TyTN II requires the maximum current from its USB connector to work; a hub reduces the available power; some PC connections may not have enough and this could account for the problems some users are experiencing perhaps??
Click to expand...
Click to collapse
i tried unchecki the box for usb-to pc and i disabled the firewall and still had no luck. ill y a different computer and report back
jaygriggs said:
i tried unchecki the box for usb-to pc and i disabled the firewall and still had no luck. ill y a different computer and report back
Click to expand...
Click to collapse
Have you fixed the problem yet? I'm having the same problem and tried everything suggested here.
I tried it on 2 computers with Vista. First it worked, but since my laptop with XP isn't reacting on my Kaiser anymore, Vista can't find the Kaiser too. Only a friend of mine, who has a Trinity, can use activesync. Is flashing a good fix?
Found solution to my problem
I have finally found a solution that works for me (having tried everything that everybody has suggested, plus more).
I found that if you have a password enabled (ie, something that has to be typed when the phone is first switched on; available via Settings -> Personal -> Lock) and a firewall running, then an ActiveSync connection fails for no obvious reason.
Disable the firewall and your phone will prompt you for the password after which ActiveSync works.
Disable the password and there is no prompt with/without firewall and ActiveSync works.
In my case I also had to untick the 'enable advanced network functionality'.
i am starting to thing there maybe a big problems here , i have the same thing and nothing has helped,,diffant pc`s i have hard reset the phone, unticked Enable advanced network. and still nothing.
The problem that I found was the notifications queue for ActiveSync on my phone had been corrupted.
I downloaded memmaid and used the "recreate Activesync" under the database menu.
Unplug from the USB, run MemMaid and on the "JumpTo" softkey go to "Databases\Notification queue". Tap on the arrow to the right of "Add..." and tap "Recreate ActiveSync". Soft reset your phone wait 60 seconds after everything is loaded and plug the USB cable in. You should be good to go.
This is a known problem with ActiveSync and happens on a plethora of WMD's, not just the Kaiser or HTC. I used to have the same problem on an iPaq PPC. Microsoft's official answer to this was it was the OEM's fault for not following strict rules on implementing properly coded USB drivers.
well BulldogXTRM you got my hopes up there,,,,
but it did not work for me,
lodger said:
well BulldogXTRM you got my hopes up there,,,,
but it did not work for me,
Click to expand...
Click to collapse
Sorry partner, I guess it's not always the same problem.
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
ActiveSync
Moved message
Needs a little bump here
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Sounds like something has changed on your PC, perhaps via a Windows Update. Have you checked to see if your firewall is the culprit?
You may also want to do a clean uninstall and then reinstall Activeswync 4.5 and create a new partnership with your device.
You can also try restoring your PC back to a date that you were able to use Activesync....
This happens to me rather frequently (I am looking for an ActiveSync replacement because of it).
However, I fix it by either soft reset of the device, PC, or sometimes both. If that doesn't work, you need to delete the partnership with the PC and reconnect.
RK
...any solutions yet?
I just got my kaiser 3 weeks ago after using a wizard for almost 2 years. what a great phone the wizard was... I kinda miss using it! Anyhow, i just experienced the sudden activesync failure. I now get random activesync openings on my kaiser with the message "To synchronize your device with a desktop computer... yada yada".
I have already setup a bogus server and set the scheduling to manual.
I have compared the wizard registry to the kaiser registry by searching every instance of 'activesync' and couldnt find anything.
I also deleted all instances of activesync in the notification queue and had memmaid rebuild it.
The device will connect to activesync but pops an error message that it could not synchronize and goes into a guest account setting. So for now I am having to use pimbackup to backup my data on the kaiser, bluetooth it to my wizard, then sync the wizard with my laptop to get the data into outlook. I am considering a hard reset but kind of want to wait until the at&t 6.1 official Rom comes out. I am also considering Chapura Pocketmirror Professional which worked well on an old Ipaq i had (wm2k3) that had sync issues. I also want to get this resolved so i can practice loading a new rom on the wizard. So....
Anyone have a fix yet? I hope so!!!
Oh, and for reference (to answer questions from other threads), my kaiser battery drains 4 to 5 times faster than the wizard in side by side use, and the kaiser definitely does not have a transflective screen while the wizard does... bummer. but the kaiser is tremednously faster!
1. Disconnect the device from your computer.
2. Try going to your device and select:
start->settings->connections->USB to PC.
3. Uncheck "enable advanced network functionality"
4. Reconnect the device.
Active Sync....
Hi,
You can try "PocketMirror® Professional 2.2.4 for Windows Mobile", its a pretty good syncronization tool, but it costs a few bucks...
I've been using the trial version of PocketMirror and must say its pretty good with my TYTN 2.
Regs,
The Reaper.
... my thoughts exactly
yeah, i tried the usb to pc option as well. even downloaded a cab from another thread that allowed me to choose rndis or usb mode. neither worked. I will probably use pocketmirror pro as well...
Hi, I just flashed a new ROM on my Orbit that works brilliantly, no issues at all, apart from the fact that the computer now doesn't see the device at all. Not even the blo-blong sound when you connect any USB device. The only thing I get connecting the cable is charging the battery. And if I start Active Sync on my Orbit I get the same message as mystic_nacho:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC"
I just tried an hard reset to try to fix the issue - no success..
Before flashing everything was fine..
Btw, my wife Diamond doesn't connect either, and it never did it: something related to the TouchFlo thing?
Any idea?
The ROM I flashed is
gullums TouchFlo2D beta 4
update
I found the Diamond 'Getting started disc' and installed the Windows Mobile resources tool...
The disc I have from the Orbit box is for Windows Mobile 5, I guess it's not worth to find it out and try...
Nothing changed, anyway.
update 2
Yesterday night out of the blue - while the Orbit was still connected to the pc - ActiveSync started to work... F. knows....
i had the same problem - sync was working fine and then stopped. what worked for me was to go to USB to PC under settings and uncheck "enable faster data syncronization".
hi,
i also had sync. problems in the past.
searched for months.. since i figured out that some registry entries on my PC where missing!
imported the mayor setting from my brothers PC and TADAAAAAA. problem solved.
search my threads and maybe you 've luck with my soloution!
mystic_nacho said:
All of a sudden my activesync has stopped working. I can't connect via USB or bluetooth. It worked fine in the past! Now, if I plug in my Tilt with the USB it gives me an error message saying Activesync cannot connect, and gives me the option of troubleshooting. Going through the troubleshooting process yeilds no diagnosis; everything appears to be working ok.
If I try and sync with bluetooth, I see the Tilt connect, and then disconnect a few seconds later. No error messages, no nothing.
My Tilt's activesync window displays the message:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC." It once displayed info such as my last sync, etc.
I've tried reinstalling activesync, and disabled my firewalls.
Anybody else have this issue, or know of a fix?
Click to expand...
Click to collapse
Have you recently used a memory cleaning Application like memmaid, Clear Temp, or SKTools? You might have cleaned out some important notification files, like repllog,exe that is used for activesync.
I had the same thing happen to me when I first used these cleaners. I had to do a hard reset on the phone to make it work again found out about the remedies listed below after the reset.
I have heard others were successful repairing these notification Queue's with MemMaid. You can hold your stylus on the repllog,exe notification, and a popup up will appear, asking you to Recreate ActiveSync, or rebuild notification Queue. I don't know if this feature is available in Clear Temp, or SK tools.
I've also heard of restoring activesync by unchecking all of the folders, syncing, and then adding each folder back to the list, one by one, until all is restored.
I too have just developed the same problem.
I have 2 TYTN II' one will sync fine the other wont.
It all went horribly wrong after I tried to install Wisbar and an Ipod theme, after I uninstalled it, cos it didn't work I found I could no longer sync with USB to PC and the sync option is greyed out on my phone. The phone will charge with some of my usb cables, but now even seems fussy about which cable will charge and some now won't.
I am given to wondering whether the usb connection on my Phone is the problem...everything else seems to be working fine.
I have even installed different ROMS via the memory card still the problem persists.
I would love someone to come up with a fix
**UPDATE**
Well I now have got it working, in my case I was right, the usb connection on the phone was to blame. I took it to a mobile repair shop, I told the guy that I thought it was faulty he took one look at it and said that I had a bent pin, he got a little tool out and teased it back into position, sure enough when I got home it worked fine so now I am able to sync again. Not sure how long it will last though.
**Update 2**
Failed again, at least I know what's wrong now.
I recently got a new PC with Vista Ultimat. Synchronizing the phone has been a nitemare.
If i hook the phone up, the computer beeps in recognition; I can even browse files on the phone sometimes. But ActiveSynch says I'm disconnected, the phone says I'm connected.
I find the only way I can get the synch to happen is to install MS Mobile Device Center 6.1 . I have the phone hooked up during the install, and during the install the phone is recognized and it will synch.
Any ideas on improving this. I"m surprised I didn't find this and a solution already out here (maybe using wrong search terms.).
Thanks
Try the info in here.
http://forum.xda-developers.com/showthread.php?t=359513
Thansk for pointing that out, but it didn't help.
And, interestingly, even reinstalling WMDC doesn't always work either.
What rom are you using? I had problems synching when I flashed Garmin dk2 rom. But all others work fine.
Try this, it worked for me.
Go to start<<settings<<connections tab. Then select the USB to PC icon. Uncheck enable advanced network functionality. Restart PPC and then try to re-sync.
After performing a ROM update and managing a few "finicky" syncs with exchange server info plugged in, I suddenly could not sync at all with WMDC. In fact, all I get is the "connecting" sign followed by a big red "X" and the word ERROR.....nothing else. No error number or anything....... there is no partnership established and when I click on set up new device partnerships, My Diamond shows up as a "Guest".
I can still browse the contents but I can't get it to sync at all! I am so annoyed with this.... its 6.30am and I can't walk away from it. Searched everywhere and only found a post from the Kaiser forum where someone seemed to have a similar problem. THere were no replies to that post.
Can someone help me? Things I have tried to do so far include going into "USB to PC" and unchecking the box that says " Enable advanced network functionality"...I have also tried uninstalling the drivers and reconnecting. Drivers seem to install fine but WMDC still gives that stupid error and no explanation whatsoever.
First of all, I've tried searching numerous places but can't seem to duplicate my issue. My issue is, of course, is that I am getting sync errors from HardSPL.exe/Automatic Flash when trying to HardSPL the phone.
I am using ActiveSync and the phone is Connected and Sync'd - both the phone and ActiveSync reporting the phone is sync'd. I can explore the phone and the folders, etc.. located on the phone. However, when I try to run HardSPL.exe on my PC -> Automatic Flash Mode I am getting Fatal Error - The phone is not sync'd with the PC. I have unchecked Fast Data Connection; I'm not in Flight mode; Internet is active on both PC and Phone (tried on and off); Firewall and Anti-Virus are off; Hard Reset the Phone; I've re-installed Active Sync, as well as Deleted/Re-Installed my Mobile Device Profile.
I am at a loss. Any ideas? If I overlooked something please refer me.
Thanks
E6BAV8R said:
First of all, I've tried searching numerous places but can't seem to duplicate my issue. My issue is, of course, is that I am getting sync errors from HardSPL.exe/Automatic Flash when trying to HardSPL the phone.
I am using ActiveSync and the phone is Connected and Sync'd - both the phone and ActiveSync reporting the phone is sync'd. I can explore the phone and the folders, etc.. located on the phone. However, when I try to run HardSPL.exe on my PC -> Automatic Flash Mode I am getting Fatal Error - The phone is not sync'd with the PC. I have unchecked Fast Data Connection; I'm not in Flight mode; Internet is active on both PC and Phone (tried on and off); Firewall and Anti-Virus are off; Hard Reset the Phone; I've re-installed Active Sync, as well as Deleted/Re-Installed my Mobile Device Profile.
I am at a loss. Any ideas? If I overlooked something please refer me.
Thanks
Click to expand...
Click to collapse
could you quote the full error message? you are probably getting two messages, I would need to see the exact error text of the first message.
and as for the second message that you are probably getting - is it offering the enablerapi CAB link by any chance? (btw you didn't mention whether you installed the CAB file or not. this may be needed to get it going.)
PS: it would have been better to post in the main Hard-SPL thread
Usually I've seen this problem solved by ensuring you are running with admin rights as well as confirming that you uncheck the high speed sync option for activesync on USB.