Something is autodialing....but what - Touch Diamond, MDA Compact IV General

I have recently upgraded to Dutty's 1.8 ROM and have reinstalled all my usual applications but for some reason the phone keeps dialing up an internet connection. When I terminate the connection it starts again after a few seconds.
I have set my mail receive to manual and checked around the other apps I use (Funambol etc) but I cannot discover which application is requesting a network connection.
Has anyone got any ideas how to resolve? My battery life is shocking due to the connection always being on.
Cheers
Aidan

Related

Skype 2.2 disconnected after 30 seconds. Why?

I flashed my AT&T Tilt with HTC ROM. I reinstalled everything. Something wrong with Skype 2.2, I can sign in and make calls. However, after 30 seconds of conversation of each call, call discounted.
I have no problem when using Wifi connection. I got problem only with AT&T 3G connection. However, I have no problem using 3G connection for normal internet access/ browsing.
Do you know what could be the problem? Please help.
Problem solved: It is a problem of data connection. I disabled the "Disconnect After" under Data (GPRS/EDGE/HSPDA) in the Kaiser Tweak to "Disabled" Since then, Skype works perfectly.
aaronwms said:
I flashed my AT&T Tilt with HTC ROM. I reinstalled everything. Something wrong with Skype 2.2, I can sign in and make calls. However, after 30 seconds of conversation of each call, call discounted.
I have no problem when using Wifi connection. I got problem only with AT&T 3G connection. However, I have no problem using 3G connection for normal internet access/ browsing.
Do you know what could be the problem? Please help.
Problem solved: It is a problem of data connection. I disabled the "Disconnect After" under Data (GPRS/EDGE/HSPDA) in the Kaiser Tweak to "Disabled" Since then, Skype works perfectly.
Click to expand...
Click to collapse
I had a problem with Skype connecting at all intially, change my wireless setting from isp.cingular to wap.cingular and it worked like a charm. However, as of today the same issue of not connecting to the internet (only in skype) has returned even with wap.cingular. Thoughts? I am wondering if a setting on AT&T's end has changed...
What versión of Skype you use in the káiser?

Diamond Wi-Fi Problem

I have recently procured an HTC Diamond mobile and is facing the following problem:
I have a Linksys Router at home. When I switch on the Wi-Fi in my Diamond, it gets connected to the router. In the status, I can see the signal strength, Tx, Rx rate etc. But when I open the browser (both opera & IE), the web pages does not open. Error message stating check the url or does any other programme using the internet works? appears. Even my weather does not get updated. Using the same router, I am able to connect my laptop as well as my desktop to Internet.
When my diamond is synced using active sync, my mobile is able to connect to the Internet & Weather application also get updated.
Kindly help me to resolve this issue and make diamond connect to net using wi-fi.
Thank you in advance.
I have the same problem sometimes
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery" and it seems to work now.
I'm new to WM, so I don't know if it's a bug: when I don't use my phone I press the power button, or I wait it to go to "sleep mode" in 40s.
When I press power button to reactivate the screen, I can see in the first seconds that the wlan was disconnected and connects again.
So it seems that wifi is always disconnected when the phone is in sleep mode? That means no mails can be received ? Can anyone confirm?
Thanks
Hi there for both of you!
I had a connection problem with my Diamond at home. It was almost the same as tkak just I couldn't figure out whether ActiveSync connects or not. I managed to bypass this to set my routers DHCP timeout from 1 week to 3 hours and it all went away. The network status showed periodic connect/reconnect during the problem so it might be a different prob than yours.
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Does your diamond obtain an IP adress from your router, and is the connection setup as 'connects to internet'?
cina said:
Hi there for both of you!
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Click to expand...
Click to collapse
Thank you for your answer,
I had a SE P1i before, and wifi was connected all the time with push mail. With the diamond and its weaker battery, I set up my mails schedule to connect every 15 min so wifi only needs to be active every 15min, even in sleep mode, I don't want it to be connected all the time this is of course a battery waste.
HSDPA is connecting in sleep mode there's no problem with that, I just wish to use wifi for mails when I'm at home as my data plan is unlimited for web surfing but only 10Mo/month for pop/imap connections.
BTW I don't use the "keylock" option, is it different from sleep mode in this case? I can't see the advantage of keylock versus sleep mode
I had an ETEN M600 for ages before and I found that for sync it always used GPRS even if WiFi was available. The cause for this was GPRS was available while device is asleep so it can start syncing immediately after wake up (does it needs to wake up for sync?). So you probably have to switch GPRS (HSDPA) off while you're at home.
Keylock is for locking hardware buttons and touchscreen while it is active. (You won't dial up anyone from your pocket). It has nothing to do with sleeping just if you set up the registry tweak the device get locked (Keylock software is started) if you press power to send it to sleep. (I've almost written "off" but it is obviously not true - you can switch it off with a long press on power = soft reset).
Hope this helped a bit.
Cina
Okay thank you, I checked and HSDPA is connecting every 15min in sleep mode even with wifi ON. If I switch data off I suppose nothing connects and no mail is received, which is I think it's a weird behaviour.
By the way, I have set my data connection to swich off 10 seconds after not being used, and it works perfectly and reconnects automatiquely when it needs to. But for the wifi I can find that option, it's stays connected all the time when I use the phone, even if I don't need to. Is it possible?
Maybe it's due to the fact that it's always checking if there are new networks? On Symbian UIQ3, you can pre-configure networks, give manually priorities for each networks (1.Wlan work, 2.Wlan home, 3.3G etc..) and for each application (web, mail, etc). When the phone connects it checks if the network "1" is available, if it's not it checks the network "2", and once it's connected it doesn't check anymore. Is there a WM6 advanced network tool like that?
(Sorry for my english)
I did the following and now it gets connected to the web:
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery".
I do not know why this needs to be done like this.
Thankyou all for resolving my problem
I'm experiencing problems connecting to my WL Router (DrayTek 2820n) using WiFi when the router is set to Auto instead of to a specific channel. I've noticed from some threads for other mobiles that people are exprience similar problems. Does anybody knows what is the story around which channels are supported on WiFi: 1-11, 1-12 or 1-13. My router is set to 13 by default. In addtion to that Diamond has problem to connect to some channels even in the 1-11 range. So how can I check, which channels are supported and for which region?
Edit: I did further testing and it became obvious that when using Auto channel selection on the router, Diamond wouldn't connect. When selecting manually any channel between 1-11 it works OK, but when selection channels 12-13 it stops working, which makes me believe that the Diamond doesn't have support for the channels for non-US regions.
Does anybody have any idea how to change wifi region to support 12-13 channels as well? So far I couldn't find anything on the net that would help me doing it. Is it possible that it might be WM 6.1 issue and not Diamond?
HI I am actually having a diffirent issue but still related to wi-fi. When my phone awakes from sleep, it promts me to connect to my wi-fi server at home, when it was already connected jus minutes before. I have to re-enter the pass phrase everytime it awakes from sleep. This does not seem normal as my 6.0 touch didnt do that.
Any takers on this?
For more channels, it depend of US version or EU version. You need to changer your firmware but the problem is that in France for Internet you use PPoA and Belgium PPoE and I do not know if in the US they use the same so you will probebly losse your ability to connect to the Internet. Having more channels is not interesting because you need a hope of 5 between channels ( ex : ch1 + 5 = ch 6 and ch6 + 5 = ch11) between ch1 and ch6 place a ch11 for avoiding interferances. In 802.11g that is a question of scheme.
Sorry for my poor English.
Problem connecting to home network wifi
Hi, i've been using diamond to connect to my wifi home network but since few days is not possible anymore even if nothing was changed in the settings of the router.
The phone recognize the network as available, i push connect, it comes connecting but instead of connecting to the netwok it goes back to available.
Password is correct and the setting are the same as few days ago.
Any idea which setting should be modified?
Thanks in advance!
Panco76
Hello everyone,
I have one problem with my diamond. I disabled the "data transfer" with the improved comm manager. I usually use wifi when i'm home, however, i've seen that even though wifi is active, HSDPA connection is activated as well so i got charged, this sometimes happens when updating weather data or downloading emails.
Anyone with the same problem?
Yes - having he same problem.
I have WIFI at home and at work - so i want to use GPRS only when i am outside. never managed to do this - except when i kill GPRS fully - and even then Opera, the weather and push-mail wont work. :-(
WiFi Channels 12-13?
I need to bump up this issue again.
I can't find anywhere in this forum how would you change your WiFi channel range from US to EU (i.e. 1-11 to 1-13). My Diamond was purchased in Australia and I was hoping that the new SW upgrade would rectify that, but it looks to me that's not the case. Any idea if that can be done in registry?
Thanks.
Change Channel range from 1-11 to 1-13
***Bump***
Has anybody got any ideas how to increase the channel range from 1-11 to 1-13?
Hi, I am having a seperate problem from all that are listed. I have the linksys rangeplus router, and my Diamond wont even detect my network when it searches, yet my computer and PS3 do fine. Can anyone help me?
another problem...
Hi,
i have a problem with the wifi on my Diamond aswell..
I have a router at home which is encrypted. When I try to connect to it, I type the encryption key and it says Connected but i cant surf any pages. When i go back to wifi settings my home network switches between Not available and Connecting...
However, when i remove the encryption, everything seems to work fine. Since i dont want to treat my neighbors with free internet, does anyone have any tips for me?
(it is set to Best performance... +i'm sure i enter the right key...)
Thanx
The same over here... I found out, that some of cooked ROMs had this problem, but official worked. Before I couldn't connect via WPA2-PSK AES, all other encryptions worked. Until now... I tried to flash official ROM and RADIO, but it doesn't work anymore. I'm pretty sure it must be hardware problem. I need to send my Diamond to get fixed, but... The closest repair centre is in Prague (GSMobile)
!!!!!!!!!!!!!BUT BE AWARE!!!!!!!!!!!
I owned previously Qtek8310. After I send them my Qtek to replace the joystick, it came back with broken motherboard... This repeated 3 times and everytime they broke something else. I've got my Qtek8310 back as a total crap, destroyed and scratched... I called and send a claim to HTC Europe in London, but nothing happened since then. I don't believe them anymore. If you love your Diamond avoid to get it fixed in GSMobile!

How to prevent Diamond to establish Data Connection?

I'm running the original factory/stock ROM (WM 6.1) on my Diamond and recently Diamond has had a tendency to establish a data connection (GPRS; EDGHE; 3G; HSDPA) by itself.
This happens regularly, even if you try to switch it off, the session is up again after a while. I really wonder, because there shouldn't be any kind of applications whatsoever running that would raise the connection, even though I doubt if it might have something to do with the automatical check of new e-mail messages by the WM/TouchFlo's own e-mail software?
Such issue is quite annoying and expensive if one doesn't have unlimited data subscription.
Anyone with some solution(s)?
Thank You in advance!
Look for a program called NoData, Should be on these forums somewhere
Thank you Ian! NoData seems to work very well!
Problem solved.
No worries
Uncheck the auto updates e.g. weather, qgps, anything. And/or delete internet connection settings. I don't use any extra progs and my Diamond is always offline and doesn't even try to connect.

Random Data Connections

Hey all,
I've had numerous random data connections on my XDA ignito since installing GenY's R5.3 which last for 8 hours + (until I physically disable it)
Although ive got a unlimited data plan through O2, this is annoying me no end and drainign my battery has a result.
Its even connecting itself throughput the night even though there has been no activity on the phone to cause it.
Ive installed Microsoft My Phone but the sync schedule is set to manual.
Installed cleanRAM and s2u2 but was happening before that.
Also unchecked 'download weather automatically' in the weather tab and the 'last update' confirms that.
Push internet is set to off in data settings under the internet tab.
Other than that, no other data programs have been installed short of whats on this ROM, ive set what i can find to manual.
I did enjoy the setting 'Disable all connections when device enters sleep' on the stock ROM that came with this phone but i've yet to see this setting re-appear on most ROMs ive seen.
Is there any programs on the sly in sense 2.1 that need to constantly check for updates?
Are there any tools to check what programs are accessing the data?
Can anyone suggest anything ive missed!?
Cheers for your help.
Search for Nodata app, it will help you disabling automatic data connection.

[Q] Note and Idea GPRS/3G Kerala India

Hi all,
Is there anyone here using a Galaxy Note with Idea in Kerala (specifically Trivandrum)?
I am having real trouble connecting to Idea's GPRS net, with the Note insisting that it cannot connect to the network (data only - voice works perfectly).
This happens with both the E (GPRS?) and H (3G?) data indicators. The arrows either remain dark, or the down arrow remains orange (up arrow green). Is this normal?
I have downloaded and installed all the configuration messages sent to me by Idea when I first inserted my SIM.
I currently have four listed access points:
idea_gprs
idea_internet
idea_mobile
idea_mms
No matter which one I select to use, the Note keeps insisting there is a network error.
So I cannot use Google Maps for driving directions, or even Voice Talk in driving mode, because I keep getting the message:
"Cannot connect to server. Please check your network settings and try again" in a dialog box on the Voice Talk screen which takes me to the network settings.
This is especially true in Voice Talk.
Please help.
I've faced this issue a few times on idea kerala network usually between 11 30 pm and 2 am. It's a network issue. you simply have to wait it out , in a few hours it will start working again.
I think idea's apn is "internet" not "idea_internet"... change the settings and try again...
have you tried it with other networks providers? check if 3g is working to make sure this issue is not phone specific.
Thing is, the connectivity has been spotty at best, but since the past couple of days, I have not been able to connect at all.
gps
pillainp said:
Thing is, the connectivity has been spotty at best, but since the past couple of days, I have not been able to connect at all.
Click to expand...
Click to collapse
try gps fix from market
Samsung Voice Talk
Right.
As far as I can see, Samsung Voice Talk is the only app that regularly has trouble with Idea's GPRS/3G.
Generally service is so poor and connectivity so slow that I initially thought it was a device issue.
However, on further investigation, I find that Voice Talk, while it works perfectly on WiFi, will not do so on GPRS/3G.
Everything else connects with blazing slowness, thanks to Idea.
The one constant is that whenever I try to use Voice Talk under Idea, it immediately throws the error:
"Unable to connect to server. Please check your connection settings and try again."
This dialog box has a button to the connectivity settings menu.
However, no matter what connection I choose out of idea_gprs, idea_internet and idea_mobile, Voice Talk continues to throw the same error.
Any ideas?
I am thinking maybe delete and re-install all the Idea APN's.
Anything else I should/could try?
Thanks in advance for all your help.
NPP

Categories

Resources