Hi,
My hardware keys (home, return, left, right ...) works perfectly but at a moment, if I push on Left, it return on Home, phone up don't work, Diamond Zoom himself in Opera etc ...
I restart the phone, and all is OK !
I check this with NavDbgTool from HTC :
When all is OK, It draw on screen when I touch the pad (bottom) etc ... but When there is the problem, it draw himself on screen and the key doesn't respond !
It's possible there is an HardSPL Issue ? Like the "vibrate" screen ?
I can't remember if I had this problem before (with Original ROM)
My config :
HardSPL 1.40 Olinex
ROM 1.93.406.1 FRE HTC
Radio 1.00.25.08 (I try 1.00.25.05 and 1.00.25.07)
Thanks
Sebastien
Related
I am encountering another strange behaviour from time to time (german tmob rom):
After ending a call, the backlight of the device doesnt go on any more. Additionally, the start menu button (soft and hardbutton) isnt working anymore.
I can use HTC home, X-button, phone and so on - but no startmenu or backlight.
Anybody else with this issue?
same prob
good evening,
i have the same problem with my org. tytn II often after Locking the Device "Gerätesperre" with the 1.56.407.3 ROM.
I spoked with HTC, they sad that i will get an callback, but till now nothing happends.
What is the latest ROM Version for the Original HTC TyTN II?
I saw some newer version for the T-Mobile and Vodafone Devices,
but i would like the have the Manufactures Version.
greetz toni
I found out a small workaround:
When holding the red "end call" button for some seconds, the device lock "Gerätesperre" will be activated. Simply do that, turn the device off and on again (no softreset, just sleep mode) and unlock the device. Problem gone.
Of course this is just a workaround... - i could permanetely solve this one by a hardreset.
Hi all!
This is a brilliant forum, and I am reading it with a lot of plessure
I have a HTC TyTN II, and my touch screen does not work.
This was not a problem until I updated to WM 6.1..
Now I cant use the TyTN because it says "Tap the screen to set up your windows based device"
Is there a workaround for this?? Or do I need to send it in for repair?
Thanks!
Stupid me!!!!
It was due to the stupid screen protector and stupid me!!!!
You're not stupid, fella.
Just "differently clever".
this is what emotions you just went through ................. and now you think you are a Homer Simpson look alike......LOL
Hi folks!
I had the same problem: change my at&t tilt rom/radio/spl to htc.
result: touch screen does not working!
The only way that i found is undo changes:
1º - installing and using: Remote screen Alignment to skip the first screen calibration. Just power on Tilt and wait until activesync are connected, so, run "remote screen alignment" and click skip, if the phone does not restart, do a soft reset.
2º - In the next power on, use activesync to copy JumpSPL1.56-KAIS.exe to your phone.
3º - use the buttons to navigate and execute JumpSPL1.56-KAIS.exe on the phone. (to execute JumpSPL1.56-KAIS.exe file use the ENTER key of the sliding keyboard).
4º- now just replace RUU_Kaiser_CINGULAR_WWE_.exe (OEM ROM i think)/ bootloader spl1.93.0/1.56 (maybe the screen problem occurs due the wrong spl/rom combination or newer spl like 3.28/3.29 ).
After these steps my AT&T Tilt touch screen is back to work!
Now i'm ready to try others roms again !!
PS: Sorry for poor english, if anybody don't understand anything just ask!
Hi everyone!
It's the first time I have flashed my Touch HD, I am using Miri_WM65_21820_V20.1_Premium
But I'am having some problems with winmo 6.5 - the hardware buttons (answer, home, back and hang off(?), (under the screen)) only the answer button works, the rest have been reduced to hang off. Only the answer button shows up in Start -> Settings -> Personal -> Buttons. Is this a general glitch in winmo 6.5?
Also when I close or "ok" a program it takes me all the way back to the home screen instead of going one step back ...
Also the volume buttons only regulate the system volume and not the phone volume...
If anyone else is having the same problem and have found a solution please help me...
you need biotouch, manilatoday and manila.exe from the stock HD rom to get the buttons to work.
fards said:
you need biotouch, manilatoday and manila.exe from the stock HD rom to get the buttons to work.
Click to expand...
Click to collapse
well m on the same rom and hardware buttons wprk great for me. do a hard reset or flash again.
reg volume: go to settings on tf3d -> sound-> single volume control and turn it off..
for thebok button problem well thats a problem of wm6.5 and not of any rom. no one can help except mocrosoft..
this should work fr u..
Only the direction buttons and center button do anything, and the center button brings up the start menu for some reason. Actually the other buttons don't do anything, but they get the buttons to light up. On the keyboard the arrow keys make the keyboard light come on, but nothing else and no other keyboard buttons work. Also, when the phone come out of sleep mode everytime it goes to the phone mode and enters EDFC and possibly other letters I'm missing. Touch Screen interface works fine.
When I turn on my backlight with power button its activating Push to talk. But during turn off no PTT is called.
I'm not even able to do hard reset. Coz my left and right soft keys not working.
My phone is HTC TyTnII. But I have been using AT&T Rom since few months without any problem.
I tried flashing with WWE Kaiser/o2 WM6.1 same is the problem.
ROM Version : 1.62.502.0
Radio : 1.27.14.09
WM 6.0
hello guys, i've tried to change the keyboard to my htc dream g1 (it's very very hard) and i've a problem now (i've disconnected and reconnected gps module, umts module and keyboard connector). Now when i use my physical keyboard i cant use the key "2, 3, 4, I, U" (i can press it, but nothing is shown on my display) and when i use the back key i see a strange combination of number and words on my display (for example when i write an sms if i press the back key, the display show u235fc )
What can i do to repair it ?? please help me guys
Shouryu said:
hello guys, i've tried to change the keyboard to my htc dream g1 (it's very very hard) and i've a problem now (i've disconnected and reconnected gps module, umts module and keyboard connector). Now when i use my physical keyboard i cant use the key "2, 3, 4, I, U" (i can press it, but nothing is shown on my display) and when i use the back key i see a strange combination of number and words on my display (for example when i write an sms if i press the back key, the display show u235fc )
What can i do to repair it ?? please help me guys
Click to expand...
Click to collapse
Are you using the shop manual from HTC to do this?
Sure...i have used PDF manual and some YouTube video. .any advice??
sounds like a controller problem. Try pushing a /usr folder from a rogers dream or docomo dream rom/update into the rom you're testing with. See if it changes.
*cough*WRONG FORUM*cough*
tehseano said:
*cough*WRONG FORUM*cough*
Click to expand...
Click to collapse
nice your from michigan, same here
jcarrz1 said:
sounds like a controller problem. Try pushing a /usr folder from a rogers dream or docomo dream rom/update into the rom you're testing with. See if it changes.
Click to expand...
Click to collapse
thanks for the advice !
can u explain me how to do it ??
my htc dream version is DREAM PVT 32B ENG S-OFF DREA20000 (currently with danger spl)
UPDATE : I've opened my g1 again and i've disconnected and reconnected my keyboard connector and now my keyboard works ! My problem now is with the key "back" (still show a combination of number, exatcly u542i when i press it)
and i've seen also a problem to the backlight of the front key (when the screen is black the key are still backlit)
EDIT : i've made a video to show the problem http://www.youtube.com/watch?v=VSkUK6EA8yY (sorry for the quality). It shows the problem with the back button and the backlight
who can help me ?