Is there any utility, which will do the next:
If any program want to conect to internet it will ask me first how do I want to connect: Wi-Fi, 3g, GPRS? And I will choose...
Would it help you to disable the automatic connection via 3G or anything else than Wifi?
There is an app that enables/disables Data connection with one click:
NoData (can be downloaded here)
Mar'Cel said:
Would it help you to disable the automatic connection via 3G or anything else than Wifi?
There is an app that enables/disables Data connection with one click:
NoData (can be downloaded here)
Click to expand...
Click to collapse
Thanx a lot.
I saw some discussion about this program. But as I understood it doesn't do what I want. When some of the program want to connect to internet, I want to choose the connection: Wi-FI, 3g, GPRS. I don't want to preset anything in advance, because I don't know which network will be available at this moment.
Related
Hi there,
I got a problem which I would like to share with you. When using skype with a GPRS conn, the program do not initiate a connection. If it is using WiFi, then it works with no problems. If I have initiated a GPRS conn with some other program, i.e. browsing with my opera browser, then skype connects with no problems to the allready initiated GPRS conn. What can cause this?
Thanks in advance.
skype over gprs?
would this even work, skype needs a broadband speed connection to work and skype do not support calls over gprs, maybe this is why
Skype will only work over wifi or 3G, it will not work over GPRS.
Radeon123 said:
Skype will only work over wifi or 3G, it will not work over GPRS.
Click to expand...
Click to collapse
3G or HSPDA - just the same. Skype do not initiate any conn. To be able to log in I must, at first, start a browser, open a page, keep the conn alive and then to log in with Skype
When you first ran it, did you set it to only connect on WiFi?
Log into Skype, then go to Menu > Settings
Scroll down to Connection
In Connection Method, does it say WiFi and 3G, or Use Wifi only?
If connected using WiFi only is selected, it may refuse to initiate a 3G connection, but will happily use on if its already active.
Steve-C said:
When you first ran it, did you set it to only connect on WiFi?
Log into Skype, then go to Menu > Settings
Scroll down to Connection
In Connection Method, does it say WiFi and 3G, or Use Wifi only?
If connected using WiFi only is selected, it may refuse to initiate a 3G connection, but will happily use on if its already active.
Click to expand...
Click to collapse
Yes, I have selected both WiFi and 3G and I see the screen warning me that Skype is going to use a 3G conn. The problem is that Skype do not initiate any conn, just use any if it is already initiated. WiFi conn is switched on manually by the user, not Skype. Same is with 3G - it must be initiated previously from some other program and Skype just uses it. Further more, if 3G conn is closed while using SKype, then Skype can not initiate it again. All this is too strange for me. I uninstalled Skype, deleted all files connected with it, checked registry for strings that might be in use from Skype, then installed it again and nothing changed. I have no other installed programs for handling internet connections, just those that come built in with my PPC.
I had this problem with another program that wouldn't initiate the connection. I checked my connection settings, and it was set to automatically dial MEdia Net (since i use AT&T) and I switched it to automatically dial My ISP GPRS and ever since, my programs have been dialing fine.
hey man i had the same issues i went in to conection settings and changed them to media net becouse thats what i use thats in conections then conections advanced select networks i also disabled my proxy in conections 2 and it worked for me dont know witch one of those did it for me but that should get you in the right direction
Yeah, you have to select media net as default, and disable the proxy.
The proxy is the one that's preventing you from connecting. Other programs figure it out but some don't bother and can't connect.
hey sorry if i'm hijacking ur thread but
I was curious if anyone knows about this. I'm not using a 3g connection as well. My skype gives me the option of using a "cellular" connection, but it doesn't show it connecting to my edge or gprs. I was curious as to whether anyone know if it's edge or gprs? (trying to find out if it's using minutes or whatever.. a connection besides edge n grps)
Thanks for your time
Hi guys
I've got a question regarding the diamond, though it could also be possible that this is only a windows mobile question. Is it possible to *only* allow data-connections via WLAN and *not* GPRS/UMTS/whatsoever? I want to use this thing at home and at university but how does the diamond know which connection it should use? I don't want any byte sent to my provider which is quite expensive. What happens if I open Opera and WLAN is not connected? Does it auto-connect with $money-printing-machine-for-o2 or does it then tell me "hey, you are not connected. try within a WLAN-cloud"?
Thanks
Tunnelblick
if you remove the isp settings for gprs/3g/whatever
it will never use it for data
Ah, thanks! This is what I always did with my old mobiles. I thought you had to do a magic dance with wm to achieve what I wanted.
Does anyone know anyway to get opera to ask which connection to use when I fire it up?
I have search already but have only found something about 'My Work Connection' but that does'nt work.
Like th OP stated but I need to keep the data settings so I can use them when WIFI is not available.
Thanks in advance
Creeky
Is there any utility like this?
Is there any utility, which will do the next:
If any program want to conect to internet it will ask me first how do I want to connect: Wi-Fi, 3g, GPRS? And I will choose...
I'm also looking for a solution for this problem.
Currently I has diabled the mobile data traffic by choosing an unconfigurated network at the "Programs that connects automaticly to Internet should connect with" screen.
This is fairy ok due to me rarly using other networks than wifi. But IF I do, I don't want to have to mess around with the network settings. I want an "choose your network" popup message.
I am trying to setup my Diamond so 3G only connects when I want it to. I've added the 3G button to the comm manager. Even with this set to off it reconnects when the web browser is opened.
I also have the advanced config manager installed with the Auto GRPS set to disabled but still the 3G connects automatically.
Does anyone have the same problem and/or know a fix?
It will connect whenever anything requests data, as far as I know, there's no way to stop this.
Thought there may be a hidden setting maybe in the registry that could stop this. It is annoying that the comm manager says 3G is off yet there is data connection after loading up the browser. And I'm sure it just connects even without actively requesting a data connection through the browser.
What happens when you set both options in Connections to use "My Work Network" and set your WLAN as your Work Network?
use no data
then this way you don't start it unless you want it to
hope this helps
liamhere said:
then this way you don't start it unless you want it to
hope this helps
Click to expand...
Click to collapse
Use no data? Am I missing something or is this as simple as it sounds!? Are you suggesting that by not using programs requiring data then I will not activate the 3G connection?
It certainly is a shame that upon activating a program requiring a data connection that you cannot select the source of this data ie. 3G, wifi etc or just cancel the request entirely.
if you want it to use wifi, simply connect to wifi before you launch the application. Windows Mobile is very different from Symbian in that way (Symbian will ask for each app).
Hello,
I have an problem. When i'm connected to Wifi and launch Opera, weather update or anything else which uses internet. The diamond makes connection with the 3G/GPRS network. The wifi is being ignored or something.
I thougt that i had seen this problem before on this forum, but i searched and can't find it anymore.
Does anybody know an solution or knows where i can find one?
Grtz
You can set network priority up somewhere, i'd be of more help but i don't remember where this is in settings
I have also been looking for a solution to set network priority as wlan first but cant find where to..
ident
I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.
Hesky87 said:
I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.
Click to expand...
Click to collapse
That's the exact issue i have! Its bloody anoying!
how about using NoData or from Advance configuration utilities in comm manager actually disabling all other connections ? i've been confronted with the same problem many times and rather use the available Wi-Fi over the mobile internet connections, so that helped me
That's not good enough for me. I have a databundle so when i'm not at home i wanna use that internet. But when i'm at home i want wifi!
I think i found the problem. When you make a connection with a wifi network you can choose between "internet" and "work". When you choose internet there's nothing wrong. When you choose work it doesn't make some kind of internet connection so programs fall back to the gprs.
I'm having the same problems. I'm having a data subscription so don't want to disable it in total. What I tried was go to wifi settings --> network adapters. Selected internet from the drop down box on top (work was default for me). But Opera still connects through 3G or G. What settings did you change exactly Rik_X?
The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck
Rik_X said:
The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck
Click to expand...
Click to collapse
Dank je! This worked for me.
Moderators are working with the same
I have one question.. Please help..
Is there any way to turn off the automatic data connections (such as HSDPA, 3G, GPRS, etc.)?
What I want is that I can manually turn on/off this data connections when I want to use it or not.. Why? Because there's a time when I use Wi-Fi to browse internet using Opera Mobile, then my data connections turn on automatically (I don't realize this) and it cost me a lot of money..=(
Thanks..
You Can Use Customized Rom For All That Tweaks Else You Can Search Here Hope You Get It ....
http://www.4shared.com/file/72428200/ebc177b2/MoDaCo_NoData.html
will block data connections - install and run
comeradealexi said:
http://www.4shared.com/file/72428200/ebc177b2/MoDaCo_NoData.html
will block data connections - install and run
Click to expand...
Click to collapse
Hmm interesting.. If I install and run that program, what should I do to use data connections when I need it? I need to turn off the "no data" program, or I only need to turn on data connections at comm manager?
the nodata is a program in program files when you start it up you can disable and re-enable the ability to use 3g data as you see fit