I am having problems syncing on my Vista x64 SP1 machine.
When I first plugged in my phone, there were two options, one to access the Diamond as a mobile device and another to act as a removable disk. I mistakenly chose for it to act as a removable disk. Now when I go to Windows Mobile Device Center it always shows up as Not Connected.
How can I revert this setting? I have looked everywhere and can't find any way to change this.
Doh, nevermind, I figured it out. It seems that when I did that it changed the setting on the actual phone. I dug around and found the setting on the phone.
hey, i have the same problem, where did you find the setting???
Goto start-->setting-->connections-->USB to PC.
that helped thanks!! i haven't played with settings on the phone yet, been too busy with other features (my prev device was a P3300-what a change!!!)
the syncing was still an issue tho, had to use Windows Update to get the new USB drivers.
I guess this must be a 64 bit problem...
I have had weird problems.
My work pc XP laptop all ok synchs and transfers contacts etc.
My home PC Vista 32 bit Ultimate can explore device etc but fails to synch all the time. Have to delete partnership. Reboot pc and diamond and repair. Synchs once then fails again after that.
Related
After a hard reset on the TyTn my computer is no longer detecting it when I connect the phone to USB cable. The computer makes a sound when I connect it, but Windows Mobile Device Centrer say that TyTn II is not connected, and it does not show up in My Computer eather.
I've tryed to delete the partnership and reconnect the phone, but nothing happens.
Can anyone help me please! Now I cant install any of my programs og transfer files between the computer and the pocket pc/phone.
Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box
Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box
I uninstalled Windows Mobile Device Centrer and then tryed the tip you described here. At first it looked ok, my computer detected the device and installed the drivers and reinstalled Windows Mobile Device Centrer.
But my device is still not showing up in Windows Mobile Device Centrer or My Computer
Check your personal firewall settings and open the ports MS asks you to at the Windows Mobile home/support page...
Go into task manager & see if Activesync is running. I have the same problem with my tilt & if I kill activesync then reattach it takes a moment the first time, but then it works.
Make sure you are running the latest version of WMDC. I absolutely could not get WMDC to work with my HTC Wizard for months. After MS came out with an updated version of WMDC (around June, I think) it started working fine.
If you absolutely can't get it to work, consider using emoze for over the air syncing of cal, contacts, mail, etc. (or an on-line exchange account.) I had to do that for a few months until I got it to work. Emoze has the advantage of being free. Unfortunately, neither will allow file syncronization, tho.
There is no activesync running.
And everything was working just fine before my device went "mental" and I had to hard reset. So before the hard reset I could use WMDC on this computer, transfer files and run active sync. But now I cant.
I also got an online exchange account so I can sync calender and contacts. But I want to be albe to transfer files to my computer and install new software.
My WMDC version is: 6.1.6965
Some more info about the computer may help. For instance, I take it from your usage fo Windows Mobile Device Center that you are running Vista. In any case, since the problem is with the computer and not the Kaiser, I would see if the manufacturer would provide some support.
Yes, im running Vista and I buildt the PC my self.
But Im not sure its realy the PC that is the problem, because I made the changes (Hard Reset) to the device and thats what caused the problem.
Anyway, I was hoping for some way to debug/troubleshoot this problem.
I am having the same problem. I sync to any one of 8 computers at work and one at home. Work runs XP PRO and Home VISTA Ultimate x64 all worked fine untill this week. I have not made any changes since the last sync, the computers know it's hooked up due to activesync opening and trying to connect when I plug in via USB. But it never connects. I want to flash to Dutty's newest ROM but can't connect. I sync all contacts and e-mail wirelessly but need the computer to flash (I do not have a sd card yet) Any idead would be great! I have tried the ideas listed above but no joy. I have not hard reset the device as of yet ( I need some things off of it first)
Steve
BUMP
I really need help with this!!! I'm pulling my hair out!
Did any of you that had this problem find a solution? I have the exact same issue except a hard reset will fix it for a while, and then the problem will reoccur a few months later. No software has been added during the time frame. Very annoying.
i've got just the same problem! plaese help us!
i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..
lipanz said:
i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..
Click to expand...
Click to collapse
omg!
try activesync for XP. It came with the phone or you can download it from.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx
Ok, I spent some time searching, but couldn't find the exact solution. Every time I try to sync using Windows Mobile Device Center, nothing happens. I plug in my Kaiser and it is not recognized. As soon as I remove the SD card it works fine and syncs. Just out of curiosity I plugged my Kaiser into another computer with XP and Activesync and it works find with the SD card in or out. Any ideas?
Yeah I've noticed that Vista has trouble syncing the device. When I connect I get the "Syncronizing" status bar, but it doesn't actually sync anything. Although i didn't bother to check with/without SD Cards cos it doesn't bother me that much
I've just noticed while browsing the net that there is a Windows Mobile Device Centre 6.1, which provides "Windows Mobile 6 feature support". I'm not at home now so can't check to see if I have this installed... so could it be that we're just running an old version of WMDC that doesn't support WM6?
Yeah I looked into that as well. I downloaded the upgrade from the microsoft website and still no luck. Not sure why since it works just fine on an XP machine. Not overly impressed with Vista so far.
Hello I've read around on this problem, and I cant find a fix for it. Orange UK HTC Diamond, I don't have the driver CD or anything but it seems it should be stored on the device itself.
I plugged it into my laptop (Vista x32 Home Premium), and first time it comes up with "Uknown device installed. Searching preconfigured drivers." It closes and nothing happens.
I have WMDC 6.1 installed, and have unchecked advanced network functionality.
If I install XP on a VMware virtual machine, will I be able to activesync to that ? (eventually I want to install HardSPL etc.)
Anyway, and hints/tips would be amazing.
vista and diamond
I just got my Diamond this weekend, I was upgrading from an HTC P4000. I was out of town (my home pc is XP) so I decided to sync my contacts over his vista machine (btw can this be done easily pda to pda? bluetooth?) The P4000 had trouble syncing with vista, took a few tries. After outlook at all my stuff from my old phone, I put my Diamond in and... nothing. Didn't see it, but it was charging. I fought Vista for about an hour to get it working, I had to download a windows mobile center patch off of microsoft, and restart the computer+phone.
When I got home to my XP machine, I plugged in and activesync took care of everything.
All the advice I can give you is try uninstalling your phone drivers (in device manager) and try different usb ports, and restart.
heres a link to the MS troubleshooting page I tried:
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
Hmm I'm starting to think it might be the standard USB connection that I'm using, do I need to use the standard HTC cable?
I've just tried phone on XP, and its bringing up the same error with Activesync 4.5
It is well-known that in vista you have to download, and install, Windows Mobile Device Center to sync any WM device, even PPCs.
So what's the deal?
Hey i'm also having this problem, spent ages trying to get it to work and tried
uninstalling and reinstalling everything but just get a message on the phone saying
install ActiveSync 4.5 on PC even though im using Vista.
Any ideas??
saj31 said:
Hey i'm also having this problem, spent ages trying to get it to work and tried
uninstalling and reinstalling everything but just get a message on the phone saying
install ActiveSync 4.5 on PC even though im using Vista.
Any ideas??
Click to expand...
Click to collapse
You can't use ActiveSync on VISTA!!! Can't you read the MANUAL or make a search?! Install Windows Mobile Device Center from MSFT site.
For God's sake, use the included CD, it has ALL you need to start synching.
I have x64 Home Premium, and it worked out of the box.
I'm happy for you but the first thing I did was install WMDC6.1, as stated in my first post, and as I said it isn't syncing with activesync on XP either
Hi,
I am getting a bit frustrated over this.
When I connect my X1 to my Vista x86 nothing happens (well the USB task tray icon show for about a second and vanishes again).
When I disable the "advanced option" in the USB/PC connection settings in the X1 I at least get a USB connection with something identified as "PocketPC USB Sync".
Any idea why this is happening and how I can get a real connection with the win mobile device center?
Thanks for helping me out!
Cheers,
Tillman
maybe give this a try:
http://modernnomads.info/wiki/index.php?page=Windows+Mobile+Device+Center+Troubleshooting
I've once had the issues of not able to connect my Windows Mobile device with vista too, and it can get very annoying.. good luck with it.
You might want to try and disable the firewall and then connect the device. I had this problem with Sygate Personal Firewall (sygate was bought by symantec and personal firewall is now terminated and no longer available)
Thanks for the quick response guys!
I already tried disabling the firewall (nod32) but that did not help.
Also checked all services - everything is peachy in that department.
But still - no connection.
When I switch back to "legacy mode" (disabling the advanced option in usb/pc settings on the device) then the device will tell me that I need to install active sync 4.5 or higher and wmdc still does not connect.
This is really strange...and annoying and the same time.
Any more ideas or any way for me to debug what's going on?
Thanks for you help!
Have you intalled "Windows Mobile Device Center 6.1" on your Vista-PC?
The MobileDeviceCenter should be standard without the need to install...
At my Vista Home the X1 had no problems to connect.
Open the Mobile Device Center and delete all old connections of other PPC. Then start your PC again, Softreset your X1 and try again. This should help. I had the problems too, when first connecting, because he didn't liked my G900-connection which was first
After this I too could install my G900 again and no problems since yet (2 weeks).
pf said:
The MobileDeviceCenter should be standard without the need to install...
At my Vista Home the X1 had no problems to connect.
Open the Mobile Device Center and delete all old connections of other PPC. Then start your PC again, Softreset your X1 and try again. This should help. I had the problems too, when first connecting, because he didn't liked my G900-connection which was first
After this I too could install my G900 again and no problems since yet (2 weeks).
Click to expand...
Click to collapse
Well sometimes the Mobile Device center could stuff up or not work due to some issues such as installation of Mobile Device Center 6.1 went wrong. I have experienced that I think I didn't follow the procedures correctly and things just wouldn't work. Eventually I had to do some uninstall and reinstall many times to finally get it working.
When I first plugged mine it it installed some drivers but didn't show up in the Mobile Device Center; unplugging and replugging in caused it to work...did you change settings in between plugging in for the second time?
What I have tried so far (and nothing worked):
Uninstall / reinstall WMDC
Uninstall / reinstall Win Mobile Remote Adapter (yes, this does show up once I am connected with "advanced" USB mode)
Uninstall / reinstall "PocketPC USB Sync" (shows when X1 is set to legacy USB mode)
When in "advanced" mode I can also see a new LAN connection showing up in network overview.
The same X1 on a different Vista 32bit right next to this one will connect just fine. So it's definitely about a driver or config thing with this Vista.
This is driving me...well you know what.
btw, you did try restarting your comp when performing some of those steps, and you did try different USB ports right?
I know that you had to ask.
Yes I did. I have rebooted the system several times in between all those reinstallation tasks.
By the way. When I am in USB legacy mode and reconnect the USB cable then the X1 will show a messagebox telling me that it's connecting with the host and that the user credentials / user account (having to translate here) are correct.
But still NO connection visible in WMDC.
I had the same problem with my X1. I assumed that because my HTC Diamond worked the X1 would as well.
I finally installed WMDC from the SE install cd, and bingo!! al good. Hope it works for you...
Wow!
Even though it does not work (yet) it's showing some new signs.
Installing WMDC from SE disc fails at 99% progress and then rolls back.
There's gotta be some installation error log this, right?
Thanks for coming up with that suggestion. Really, I should try installing from vendor CDs more often instead of hunting down the latest version on the net.
TillmanZ said:
Wow!
Even though it does not work (yet) it's showing some new signs.
Installing WMDC from SE disc fails at 99% progress and then rolls back.
There's gotta be some installation error log this, right?
Thanks for coming up with that suggestion. Really, I should try installing from vendor CDs more often instead of hunting down the latest version on the net.
Click to expand...
Click to collapse
maybe give event viewer a try and check under Windows Logs (not sure if it will be application or system tho)
just in case you aren't sure, in vista either type in "Event Viewer" in the start menu search bar, or type in "eventvwr"
Don't you just like vista?
That helped (to install SE's WMDC). The issue was that my HTC Universal was still connected to one USB port (for testing purposes since that device is not recognized either).
As soon as I unplugged the HTC I was able to complete the WMDC installation.
Unfortunately though it still won't connect to my X1.
Any more ideas?
what is your settings in Windows Mobile Device Center connection Settings?
Well here is my settings that is working with my x1:
Allow USB connections checked
Allow connections to "DMA"
This computer is connected to "Automatic" (this shouldn't matter)
Allow automatic device authentication checked
Allow data connection on device when connected to PC (this shouldn't matter either)
also, while this link was in the first link that I have posted for trouble shooting, just want to make sure you actually tried The offical Windows Mobile Device Center troubleshooting guide?
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
namely these steps:
Quote"
If Windows Live OneCare is installed on your machine, it may be blocking the device connectivity. Please click here for the steps to configure Windows Live OneCare to allow the device to connect.
My device wasn’t connected during this installation.
While it is not a strict requirement that you have a device connected during the installation process of Windows Mobile Device Center, we highly recommend that you do.
"
I didn't have the DMA set (changed that now). Everything else already was like you described and it does not work.
This really freaks me out. I always hated my iTunes/iPhone connectivity but that honestly works much smoother. Of course I do understand that this behavior is non standard as I have experienced myself that the phone works with my other Vista machine but that does not really help me here.
Any update on this? I am having the same problem.
I'm having the _exact_ same problem too, but in Vista x64. I don't know why WMDC can be such a c**t sometimes, as I have never been able to 'sync' with my Media Center PC.
My only saving grace is that my laptop has Bluetooth, and syncing works great on it. I have never had success connecting the USB cable (with many options changed around of course) to either of these computers. Only Bluetooth syncing works for me...
Hopefully we can find the answer!
What USB cable are you using??? the one that came with Xperia??? Cos the one that came with my Xperia never worked out of the box, it could only charge...
I also got another extra cord which came in another box, that worked fine for both syncing and transferring data until today, now it says USB device not recognized, maybe I was trying the flash X1 with new ROM through SEUS, did the whole lower volume key and power button to get the 3 strips.
Now I am using the USB cable that came with my external HDD, that's currently working, hopefully it won't fail me.
so any ideas??? I don't want to keep changing cables...
Hi, I have install windows 7 rc , and i cant have my contacts in diamond to sync with outlook. It seems active sync is not compatible with win7 . Is there a solution ? Thanks ,
in win 7 is no active sync... you have to use mobile device center
hi
this works for me on windows 7 you can download it from here
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-download.mspx
When you connect your diamond to win7, it will automatically download drivers and mobile device center . To get Outlook is your own responsibility. You probably have a 30 day trial version on one of the disks that followed your phone, but it will still sync after those 30 days.
EDIT: I have no clue wether the trial version works in win7 or not.
cobbs said:
hi
this works for me on windows 7 you can download it from here
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-download.mspx
Click to expand...
Click to collapse
Ι downloaded the above. I didnt see nothning to change. I have installed Windows Mobile Device Center and it looks to work ok. I see diamond from the pc as a hard disc, and i can use it. I also have internet to diamond throw the pc. The phone is recognized by the pc as Touch Diamond P3700, and i have the icon of sync sender in taskbar. What I dont have? The one i am interested more.. My contacts to outlook to pc.. I have installed office 2003 to the pc , and i have outlook 2003. There , contacts are empty.
I dint see to Windows Mobile Device Center to have any option to transfer contacts from phone to outlook.. Any help ?
edit... Ok I just solve it. I went mobile device settings-change content sync settings. In contact there a press sync settings ,and there it writes synconize from Pc1 Pc2. Only one was "ticked" I tick and the other , and contacts went to my pc... Very complicated i think..
Hi, I'm on Windows 7 64 bit build 7100. Trying to get my phone to sync, have installed WMDC 6.1 64 bit version, plug my Diamond in and Windows Update fails on trying to install the driver, just get PocketPC USB Sync in Device Manager with a status of "This device cannot start (Code 10)."
Any ideas where I am going wrong on this? Had no issues on Vista 64bit getting it to work, have repeated all the same steps so am scratching my head somewhat.
Edit: Solved it, turns out it was my USB extension lead, tried plugging directly into the computer and it worked perfectly lol
Windows 7 ActiveSync Fix
Hey Everyone,
There is a good write-up on how to Enable ActiveSync on Windows 7 x64 and x86.
http://capitalhead.com/articles/ena...synchronization-on-windows-7-x64-and-x86.aspx
Have fun,
Mike
good to go
seems to be working good now RC.
Stephen Lane wrote:
I think I have researched all the treads on this pretty well now & I've tried all the above including rolling back to before I 1st allowed the WDM to install to no avail. I still can't get my Diamond talking to W7 WDM still talks to my old Vista Ult machine though.
Everything looks good the updater downloads drivers then the WDM then the installs happen the device gets found and it sort of knows its a HTC device plugged into a USB port but WDM and Sync Center both don't believe its there.
I've tried resetting the Diamond complete reboots of the computer, I've changed all settings in the PC to USB menu on the Diamond (another thread) and this only changes the Device from Generic Serial to Generic NDIS but still WDM won't connect.
So has anyone got any further suggestions I can't believe its this hard every one else has no probs what might I be doing wrong (I think the fact the device is a Generic Serial not a Diamond might be a hint but I can't prove it)
Regards
Stephen Lane
Stephen Lane,
I have exactly the same problem. Did you found a solution or still facing this problem?
You can use Microsoft Windows Mobile Device Center 6.1. It's free to download by MS.
Gr.,
Dennis
Thanx alot people! This thread saved my day!
WMDC does not recognize my G1. He detect that there is a unidentified device and searching the driver to web but after a minute it was NOT successfully installed. How come? LOL.