Can't set GPS Hardware Port (keeps defaulting to "none") - Touch Diamond, MDA Compact IV General

For reasons I won't bore you with, I need to use my external GPS BT unit with Route 66. The version of Route 66 I have does not seem to allow you to set manualy any GPS settings and instead needs to be done through External GPS of Windows.
Problem is, my bt unit is paired and says its Com0 but if I try to change this in External GPS from "none" to Com0 it always defaults back to "none" meaning I can't lock.
Im using Swiftblade 7 with radio 25.5, any ideas?
edit: sorry, did try search but didn't come up with anything usefull.

i have the same problem..

dardobastardo said:
i have the same problem..
Click to expand...
Click to collapse
you should try to follow instructions by agorapho99 in http://forum.xda-developers.com/showthread.php?p=2591556

If your GPS SW is too old to work with GPS intermediate driver on Windows Mobile, I recommend that you find port splitter SW to do the job. I use "JAL Port Splitter for WM6" to make Mapopolis work with HTC Diamond internal GPS. You can google for it, it is freeware.

Related

tom tom and BT pairing

Has anyone else had a problem keeping a Bluetooth GPS receiver paired with Tomtom. After much messing about I managed to get tomtom working and even paired it with the receiver, but when I switched off tomtom and restarted it the next day I had to redo all the pairings again, altering com ports etc.
Surely this can't be right
same problem here,
still looking for a solution, will post here if i found it, if you can find it first, please post it too...
i'm gonna take a look at the file properties written by TomTom, maybe they are setup to be readonly, making Tomtom forget it' setting and rest the com-port settings after every restart.
i m not sure yet if it's a tomtom problem or a bluetooth / gps problem of windows mobile 5.
CIAO!
VOODOOS!L
Bluetooth tomtom
Look in the registry for the com9 change that to com7 (the com port you used for pairing with gps device. It should work. Bought regedit.net for editing the registry
try to change in registry
Where do you change it in registry edit
Did you open up the GPS control panel?
I found thizs excellent walk thru a few month's ago & have had no problems whatsoever.
http://www.howardforums.com/showthread.php?t=742385
I finaly found the problem: at the bluetooth pairing setup of the com-port, the default selection is to use a secured connection, but it seems like TomTom doesn't support a secure connection very well..
so if anybody else has this problem: remove the current bluetooth pairing of your GPS device, repair, select the serial connection, add a new outgoing port to be for example COM6 and remove the "secure connection" selection.
Open TomTom and select the COM port you used as at the Bluetooth pairing com port.
Now, when the GPS is turned off and back on again, the pairing will be remembered and TomTom will immediately recognize your GPS.
I hope this will solve some problems for other people too...
CIAO!
VOODOOS!L

xda/tomtom/gps problem

I need help too...
I have Tom Tom on mmc card but my Gps receiver wont connect. I always get 'no gps device' message although my device is connected. the red light begins by flashing but then stays on constant. (is this relevant?).
My incoming beams box is already unchecked.
I have XDA 2i and would like exact step by step instructions how to get my GPS to work... (I'm a new user - it took me one hour to set a song as my ring tone - so imagine how long this is taking!) I feel like I have tried absolutely everything and its really starting to drive me crazy. All I want is sat nav.
Thanks.....
XDAIIi GPS problem
Chicken,
what version of TT are u using?
what gps receiver?
If it's TT3.x, 4.x, or 5.x (don't know v6 yet), first you'll need to pair your receiver with your XDA. Go to Bluetooth Manager->Tools->Paired Devices. Here (if it's not there already) tap on Add and then tap on search icon (next to Device: field). It will search for any bluetoothdevices in range. Once it finds your GPS receiver, enter the passkey (provided with the receiver, usually 0000) and tap ok. The GPS receiver should be installed.
Start TT, go to Change Preferences and browse to Show GPS Status. Here, tap on Configure, choose your GPS device (I guess it will be Other Bluetooth GPS), click on Select (if prompted for pairing the GPS with PDA just tap on Continue) and choose the port. It'll be one of the bluetooth serial ports (it's COM6 in my case). Make sure that the receiver is still on and bluetooth active and watch the GPS status. If there is No GPS device! message on the top go back to configuration and change to another port.
If still no luck go to your XDA Start->Settings->Connections->Beam, make sure the Receive all incoming beams is not selected. If still no joy, you'll need to test all the connections, check if you can 'see' the receiver with another bluetooth device ez mobile phone, than do the same with your PDA. You can also reset the GPS receiver (check the manual), you can also do it by removing the battery from it and leave it like this overnight...
Good luck!
can you recommend a good GPS receiver?
Hi Robsonix.
Thanks for your reply. I got stuck at the first stage though - but was relieved to find out I'm not a complete dummy as this is what I had already tried - but failed. I cannot get my GPS to pair up with my bluetooth. My phone cannot find it.
I bought my receiver on Ebay. its just a wire thing that connects through my cig lighter to my phone. It didnt come with any instructions!! I think its a little dodgy. Can you recommend a proper one?
I'm not sure what tom tom it is, I think 5?? But actually I havent a clue.
I cant check if the receiver works with another phone as it only has connections for the xda 2i.
Thanks for your help - I hope u can help me some more.....
any recommendations??
Chiken
ha ha. Never mind - I think I've found the problem. I'm such a thicko!! It takes two to tango right? I'm such a thicko...
Port Numbers
chiken said:
I need help too...
I have Tom Tom on mmc card but my Gps receiver wont connect. I always get 'no gps device' message although my device is connected. the red light begins by flashing but then stays on constant. (is this relevant?).
My incoming beams box is already unchecked.
I have XDA 2i and would like exact step by step instructions how to get my GPS to work... (I'm a new user - it took me one hour to set a song as my ring tone - so imagine how long this is taking!) I feel like I have tried absolutely everything and its really starting to drive me crazy. All I want is sat nav.
Thanks.....
Click to expand...
Click to collapse
Do you select the correct port number to match your gps port number in the gps setup in TomTom?
DAz
SPV 1500 "Alpine" TT5 with GPS receiver
I've just joined this Forus following the aquisition of an Orange SPV which is now unlocked to run on T-Mobile. I have also used an MDA Compact II (Charmer?) successfully for the past year.
Like this current thread originator "chicken" (and no doubt many others) have had difficulty running my Holox BT-321 BT sat receiver with TT5. It pairs OK, but I TT5 cannot "see" the device, even though I have selected just about every Com device available.
I recently bought a wired sat receiver (just like chicken did), and thought this would work better. However, TT5 will not see this device either!
Can someone tell me how I can check which Com port is active on the PDA, or check if there is an input stream coming in from the sat receiver?
This is getting bloody frustrating now. My old Nokia 6600's worked first time out of the box!
Thanks
Peter (with the Aprilia Falco 1000)

GPS & Bluetoothproblem (newbie)

I have a slight problem with my gps, i've installed TomTom 6 (not the newest ver.) The problem is that i don't get a GPS signal, It just say "No valid GPS signal" and I do choose TomTom Bluetooth GPS reciver. Is that correct?
I do have a problem with my Bluetooth aswell, my Sony Ericsson HBH-PV705 Bluetooth headset (handsfree) doesn't connect to my TyTN II. I belive there might be some kind of setting that i've missed...
It connected nicley with my Samsung that I had before.
And I have downloaded and Installed the HTC hotfix regarding Bluetooth.
I've tried the search, but I couldn't se that there was anyone else with this problem.
Anyone who know what to do??
First off, are you sure you really need to use the Bluetooth adapter for GPS? After all, it comes with a built in one... I'll show you my config to get an idea:
GPS Receiver - Other NMEA GPS receiver
COM Port - 4
Baud Rate - 9600
I recommend you download and run GPS Test if you haven't already. This will tell you what Baud rate and COM port you should be running on.
In regards to your bluetooth Headset, are you sure you're following the correct process for pairing the device? I remember setting mine up, it was a nightmare... until i read the instruction
I just got my tytn II and am having the same problem. I don't have TomTom, but my gps doesn't seem to work, I tried gps test but after 10 minutes it still didn't tell me anything. I can't get my headset to work either, I paired them, the phone recognizes it, but doesn't let me talk on it.
I think me and Lalla have the same problem, I can't figure it out though =/
Thanks in advance.
Lalla said:
I have a slight problem with my gps, i've installed TomTom 6 (not the newest ver.) The problem is that i don't get a GPS signal, It just say "No valid GPS signal" and I do choose TomTom Bluetooth GPS reciver. Is that correct?
I do have a problem with my Bluetooth aswell, my Sony Ericsson HBH-PV705 Bluetooth headset (handsfree) doesn't connect to my TyTN II. I belive there might be some kind of setting that i've missed...
It connected nicley with my Samsung that I had before.
And I have downloaded and Installed the HTC hotfix regarding Bluetooth.
I've tried the search, but I couldn't se that there was anyone else with this problem.
Anyone who know what to do??
Click to expand...
Click to collapse
Firstly - have you got a TyTn or a TyTn II (AKA Kaiser)? As another poster says, why are you using bluetooth for GPS. The TyTn II has GPS built in!!!
Again as said above if it's a Kaiser you have use "other NMEA" as the device not bluetooth.
If Tomtom says "No valid signal" then it has found a GPS device but is waiting for a strong enough signal. The first time you set up it may take a long time to connect. Leave it in a place with a clear view of the sky. It will also help if you have run Quick GPS from your programs menu.
Mike
edd1e said:
I just got my tytn II and am having the same problem. I don't have TomTom, but my gps doesn't seem to work, I tried gps test but after 10 minutes it still didn't tell me anything. I can't get my headset to work either, I paired them, the phone recognizes it, but doesn't let me talk on it.
I think me and Lalla have the same problem, I can't figure it out though =/
Thanks in advance.
Click to expand...
Click to collapse
Did you change any settings in "External GPS"? This can cause connection problems. (There are fixes for it though).
Mike
mikechannon said:
Did you change any settings in "External GPS"? This can cause connection problems. (There are fixes for it though).
Mike
Click to expand...
Click to collapse
Not sure if I changed it but here are the settings:
port: COM4
Hardware port: None
Baud Rate: 4800
manage gps... is checked
Thanks for your quick reply
I tried gps test but it took about 10 minutes to get 3 bars then I lost 2 :/
Maybe I just need to leave it out for a long time?
edd1e said:
Not sure if I changed it but here are the settings:
port: COM4
Hardware port: None
Baud Rate: 4800
manage gps... is checked
Thanks for your quick reply
I tried gps test but it took about 10 minutes to get 3 bars then I lost 2 :/
Maybe I just need to leave it out for a long time?
Click to expand...
Click to collapse
Actually, that sounds like it's working OK. You will notice that the Kaiser picks up and drops sats every other second. There is a thread about this someplace. In other words as you move around the sat signal will pick up and drop sats as you move (even if you are standing still) When using Tomtom or the like this does not seem to matter and it works very well.
I have found that when you first switch on the GPS make sure you have a clear view of the sky all around, then you can move to more obscured areas and it will hold a proportion of the signal. If you switch on in an obscured area, then it will take a while to acquire a fix. Running Quick GPS regularly will speed things up.
As a guide, if I switch on indoors it can take ten minutes even near a window. In the car it fixes in less than a minute (normally).
The exception is if I last switched off GPS some miles from my current location. It seems it remembers the sats position from when it was last used so if you switch on later some miles away, it takes longer - presumably 'cos it's looking in slightly the wrong place.
Mike
Ok, I'm trying GPS test right now, seems to working. Thanks for your help.
Any clue why my bluetooth headset doesn't work right? Their paired and the phone recognizes it, but I can't use it in a call.
Thanx for all the help from you all!
I've managed to fix the settings for my GPS so it works fine. But the problem with my Bluetooth is still there...but I won't give up!
go to youre bluetooth devices, find your bluetooth headset from the list and tap it. now check and see if both boxes are ticked, the stereo headset and the handsfree. now go back to the list and long tap on the bluetooth headset and set it to handsfree. that should sort it. if not try repairing it
Didn't work for me. My bluetooth headset only gives me a hands free options but it does not work. I tried it on another phone and it works fine.

how to setup gps with t-mobile navigate

i just got my hands on a t-mobile navigate carkit with a
thb bury 021303 gps reciever
but i am unable to get a gps signal.
does anyone know how i set the gps so it will work?
i already installed the latest tomtom, the latest navigate software.
and i tried all of the com ports.
but still i dont have a signal.
Have a look at this
If this is the receiver you have, then you need to mechanically alter the device and change the NMEA settings.
I'm sure there is a similar explanation on how to do this in english.
Sascha
i checked out the site you mentioned.
i have a different gps mouse then the one that is displayed on the picture.
so unfortunally this work around doesnt work for me .
any other suggestions?

Bluetooth GPS setup for IG0 8

Due to lag problems with the internal GPS i would like to use an esternal bluetooth GPS reciever with with IGO8. I have got this to work with TT& but only have the local map for this. When I try to set up in IGO8 I can't find a settings page. Is it possible to do this or am I missing something obvious.
You have to make connection to your bluetooth GPS receiver, assign COM port and then in iGO select that COM port and speed. And it'll work ;-)
angus99 said:
Due to lag problems with the internal GPS i would like to use an esternal bluetooth GPS reciever with with IGO8. I have got this to work with TT& but only have the local map for this. When I try to set up in IGO8 I can't find a settings page. Is it possible to do this or am I missing something obvious.
Click to expand...
Click to collapse
check also settings/external GPS.

Categories

Resources