hello, i'm having some problems with my kaiser.
after upgrading my hardspl, and installing hyperdragon rom, my touch screen never work again, i have already install windows mobile 6.1 ptg rom, but the touch screen don't work, so i canĀ“t pass the screen alignment.
i tried the welcome.not file, the remote screen aligment program, but nothings work. then i tried to reverse my spl, and rom to wm6. but i can't do it, and i can't find the rom file. i have read all the tutorials here in the forum, and i can't do it.
so i'm asking for help!!! i'm afraid to send the kaiser to the brand, and they send it back because i don't have the original software.
sorry for my bad english :X
im using the same rom and what i did was edit the touchpanel registry and it works for me. hope that helps.
and how did you do that?
thanks
can anyone help me?
Related
Hi all,
Wondering if anyone had experience such problem before, and would know any solution to this problem, as per the title?
About two weeks ago, my Diamond could not load into the wm, and remains stuck on the screen.
I thought about doing a Rom Ugrade Utility, but since it cannot load into the windows for active sync, I wonder what else may I do?
If anyone has the answer to this, greatly appreciate if you may post your solution up.
Thank you!!
Hi,
If you haven't done it already, do a hard reset, maybe that works!
If not, try this:
When you're in bootloader screen,
plug in your diamond.
THere should appear the word 'USB' on your bootloader instead of 'serial'.
Then flash new HardSPL (I recommend 1.40 olinex http://forum.xda-developers.com/showthread.php?t=400950) via your pc.
After that it should be done!
I had the same problem as you, this worked for me!
i have htc touch diamon P3700 with windows mobile 6.1 and i want to change language from sweedish to english and if not i want to upgrade it to wm6.5 i download many windows and it doesnt succes plz helpppppppppppp
the same pb plzzzzzzzzzzzzzzzzz
well, you both need to put on you reading glasses and start digging this forum, first of all, you need HardSPL on your device to be able to flash a ROM in a different language or WM build.
If you do a search here with the high lighted words you'll be able to figure it out, and also this link should give you a good start:
http://forum.xda-developers.com/showthread.php?t=416211
Are you sure that the Hard SPL (or whatever) works on european models of the touch diamond, i.e. the P3700
[first edit]
I mean, i can't get it to work. The program doesn't recognise my phone.
[Second edit]
I managed to get it working with hardspl. i had to use the "manual" way by moving "SSPL-Manual.exe" to my TD and then run the romupgradeutility with installs HardSPL.
Glad you figured it out, i am european and have the P3700, hardSPL worked automatically for me, but for an unknown reason sometimes you have to run it manually.
happy flashing
Hello!
I have a Tmobile MDA Vario 3 and the following problem:
I used my phone normally every day, and one day no ringtones are working... I can hear them choose one of the sounds, but no sound if somebody rings me...
what can it be? I dont wanna make a hardreset, because many programs on it and i dont wanna lose them...
I did a hardreset and used before sprite backup, i tested the ringtone and IT WORKS, now i put back my backup and no ringtones working now again, how can i find the mistake in the system? Can i look into the registry like normal windows too?
in another forum i saw someone means it can be the divx player, i deinstalled it, but nothings better...
I NEED HELP... what can i do?
Regards
Can't you just put the programs back on there? It's really not that hard.
ChumleyEX said:
Can't you just put the programs back on there? It's really not that hard.
Click to expand...
Click to collapse
Its too much for me...
Its an tmobile device and i putted manually the o2 internet settings in there nobody knows whats the defect on there?
Regards
I could flash and setup my Tilt in no time flat.
Ok, i will do a hardreset, but is there a ROM for the Vario 3 so that i have an original HTC ROM?
And can i flash the phone then to WM 6.5?
Do you have any links for me?
are you on a flashed non OEM rom?
I am on an original tmobile rom, and i i have to reset i wanna change to another rom like windows mobile 6.5, i have to change rom to a htc rom 6.1 and then i have to go to 6.5 right? i wanna put away tmobile settings on hardreset!
Well if you hard reset it will put the oem rom on it. Then you follow the instructions to be able to flash roms on it. Until you flash a rom on it, every time you hard reset it the factory rom will install.
Can you give me a link where i find a description what to do for this?
I wanna flash the rom to HTC WM 6.1 original, and after this i wanna install 6.5 is this the right way??
[Resources] Flashing Your First Kaiser Rom (For Noobs)
No need for interim flashes after hard-spl you can flash a 6.5 make sure you read about Radio update
Maybe you have installed some softwares. let check recent installed softs and uninstall them, then restart. No need to use other rom if you like it
If it still does not work, do hard-reset.
Goodluck
My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??
rglive2008 said:
My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??
Click to expand...
Click to collapse
First of all this is Android development so this is very offtopic. Second you hopefully can find and download the correct WM version from HTC by entering your S/N. Then I think all you need to do is to hold camera button + reset the device to enter SPL, connect to computer with USB cable and then run the installation (that you downloaded from HTC).
Hi Kalit_Kaffe, Thnx for the Help. Was helpless...thts Y had to post it here.
Anyways...is the hard reset(holding camera button...the soft buttons and stylus) the same as Factory restore??...then i wouldnt be needing the file that you mentioned for download??
Am i right?
Reset to factory defaults will not replace the 6.5 rom you have installed, you don't need to HardSPL again, that only needs to be done once.
Your best option would be to get a stock rom from the XDA Wiki pages, My advice would be either get a shipped rom that matches your carrier, or the latest generic HTC shipped rom, both can be found here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Note that once you flash a rom a Hard reset does not remove it, only flashing another rom will do that. Also flashing a stock rom is actually one of the best ways of clearing out previous flashes.
hi
Hey man thnx a lot! really helps!
HELP!!!!!!!!!
How do I install the USB driver for HTC TyTN II, to whom I am the Android 1.5. Before that I was a Windows Mobile 6.5 and am using Microsoft ActiveSync. I would like again to get back to WM 6.5, but can not seem to connect mobile phone and computer.
You can't flash back to Windows Mobile through usb while in Android because of the driver issues. You have to either enter bootloader mode and flash, or you have to do it through your storage card. And before you post back asking me how to do that, use the search. There are instructions all over the place.
thank you very much I was able through bootloader mode
does anyone know what is the best WM for HTC taytn 2? I am installing TPC_Kaiser_Titanium_Ultimate_28002, it's not something particularly good
There is no *best* ROM. Please read threads and flash based on your needs. I think it's about time this thread be done for.
rglive2008 said:
My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??
Click to expand...
Click to collapse
Looks like you need to downgrade your Hard SPL for WM6 so that it doesn't pause a lot.
http://forum.xda-developers.com/showthread.php?t=498320
Also there seems to be a guide for what you want. Sorry I stopped reading through the threads when I saw someone say you don't need to do anything with your hard spl.
http://forum.xda-developers.com/showthread.php?t=335568
Hi, if anyone could please help me i would be gratefull, i recently purchased a D2 but its already preloaded with WM6.5 rom version 2.53.405.5 (76952)WWE, But i really wanted WM6.1 as, among other things, i wanted to use the handwriting rec.
does anyone know what stock rom to reload? and where i can get it? sorry to ask such a basic question.
thanks in advance,
http://www.htc.com/europe/SupportDownload.aspx?p_id=249&cat=2&dl_id=613
thanks for that, however it seems to have just bricked the phone
thanks for that, however it seems to have just bricked the phone
it seemed to work, all the correct messages displayed
but......
now all that happens is it turns on, shows the touch diamond2 screen, then resets
it has the following text in red in the lower left hand corner
r 3 . 43. 25 .19
g 61. 20t. 25. 10U
d 1. 39. 47382
does any one have any ideas?
Try to hard reset.
tried that before i posted
and a soft reset, and another hard reset to be sure,
i searched the forum but couldn't find any reference to that type of error either.
any ideas on how to retrieve it from paperweight mode?
Download stock ROM for your region
Unpack it with WinRar or TotalCMD
Rename RUU_signed.nbh to topaimg.nbh
Copy topaimg.nbh on your SD card
Enter bootloader (hold volume down and turn on phone) and follow instructions
edit:I guess for wm 6.1 you need lower version of SSPL
thanks dude, i used the bootloader to reinstall the latest rom from HTC.
Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
my phone is no longer a brick however i am back to square 1 in that i still have wm6.5, and i want 6.1
ive tried to reflash with the older rom fighter7139 suggested
RUU_Topaz_HTC_WWE_1.39.405.3_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship
but it gives me the same rebooting error.
any ideas why wont the older rom work on my phone? or if theres an alternative to that rom ?
thanks
I've loaded hardspl 1.83 and extracted the file RUU_signed.nbh and renamed it to topaimg.nbhand,
i moved it to the SD card, reflashed the phone with the 6.1 rom,
but i get the same error.
any idea on what rom i should use to update from?
or what stock spl i'd need to run this rom's version of 6.1 ?
a thought
maybe i don't even need 6.1, all i want to do is to fix two things -
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
2) add handwriting recognition
- would also be nice to have the taskmanger icon, the battery icon and the original windows start menu back too, but im not dependent on them....
so i guess any rom would do that allows these functions, any help or info on this would be much appriciated
terminalkhaos said:
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
2) add handwriting recognition
Click to expand...
Click to collapse
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=824
thanks for that, however that was the first thing i tried, i saw the download for the handwriting ap just after i got the phone, not knowing it didnt have it when i swapped from my diamond,
the thing is the update only works on certian AP version control builds -
the message on the site is -
Note: AP version control -> The criterion will pass if the Touch Input for Pocket is equal to Version 2.1 (Build1919.1320), or lower.
mines a higer version, which i assumed originally had to do with it being wm6.5 not 6.1,
- i have tried downloading and installing anyway but it wont load.
does anyone know how to get this update to load, or how to change the AP version control back to a lower version ?????
any help would be much appriciated.
if it matters,
i'm running Duttys HG, and ive flashed to hardspl,
i don't mind flashing back to whatever, i just really need the handwriting app
The handwriting SIP is likey hidden.
There is a reg edit to unhide, just search SIP Reg Edit and you should find it.
If I recall it was under the WM general tweaks.
thanks for that, i got the letter and block rec working, but still not the transcriber the reg key shows it should be showing, but i think the actual file may not be there,
fixed after changing the reg, and downloading the update, you then need this transcriber cab
http://forum.xda-developers.com/showpost.php?p=3661845&postcount=47732
result
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
TheNorthSideWhiteGuy said:
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
Click to expand...
Click to collapse
Start here.
Once you unlock your phone, you can flash to anything you want.
6.5 is hands down better than 6.1, there are 6.5.219xx builds that have the drop down start menu.
Thanks Bruce!
For some reason I couldn't find a good Pure forum, so that link helps a lot.