On January 4th, my beloved P3600 cracked in my pocket while in Dubai. So I bought an iMate Ultimate 6150 -- a terrible decision.
My iMate was stolen last week, and I need my Trinity to tether to AT&T'd 3G network. I was able to get it working by installing SOTI's Pocket Controller, and forcing a Bluetooth tether connection. It works fine.
But I'd like to still upgrade the darned thing. I'm going to order a new screen but they supposedly take 15 days from Hong Kong, and I'll be lazy in the install time.
Has anyone upgraded the ROM on a Trinity with a cracked screen?
dada21 said:
Has anyone upgraded the ROM on a Trinity with a cracked screen?
Click to expand...
Click to collapse
Don't think you can do that, once the new rom installed you won't be able to bypass the align screen page.
Try MyMobiler at http://www.mymobiler.com/ . I believe once you get to that align screen, activesync is already working for the phone. That's all you need for this program.
chavonbravo said:
Try MyMobiler at http://www.mymobiler.com/ . I believe once you get to that align screen, activesync is already working for the phone. That's all you need for this program.
Click to expand...
Click to collapse
My Mobiler is an Awesome program, but I just tried it for Align Screen, and it does not work. The screen needs to be physically touched... For a second there, I thought you had figured it out for him..
Update: I could not even get My Mobiler to run in a new Flash. Just tried it. Activesync did not connect that early on. Are you able to get the screen to accept ANY input? Maybe you could tap your way past the Align Screen, even if not tapped correctly, then use My Mobiler to run it from there... ??
There's a registry edit somewhere that toggles what occurs on first startup, such as password setup, align screen, etc. Look around for it, I forgot exactly where it is. Try disabling the align screen then.
chavonbravo said:
There's a registry edit somewhere that toggles what occurs on first startup, such as password setup, align screen, etc. Look around for it, I forgot exactly where it is. Try disabling the align screen then.
Click to expand...
Click to collapse
But he's trying to get past it on a NEW Flash. It would not be capable of starting a registry editor at that point.
Yes, but it is possible to modify a rom's registry before flashing. Or else what would be the point of these regedits as they're only for the first run?
chavonbravo said:
Yes, but it is possible to modify a rom's registry before flashing. Or else what would be the point of these regedits as they're only for the first run?
Click to expand...
Click to collapse
Ah, now I understand... Sorry... That may be the trick!
http://forum.xda-developers.com/showthread.php?t=386335
jorgerib said:
http://forum.xda-developers.com/showthread.php?t=386335
Click to expand...
Click to collapse
Great Tip! Hope it works for him.
Related
Hey guys.
ive made a simple patch for the blue angel running windows mobile 5 where we got the error connection loss after loading any more than 200kb.
The patch I have made sorts this problem and one page for example that I now know that loads and didnt used to is Ebay, and buzzdev.
Simply insert this into the registry of the blueangel,, only for Windows Mobile 5.0.
U MUST let the registry flush before reseting the device. To do this press the power button to turn device off, wait 15 secs, turn back on and then soft reset.
Cheers.
s1nn0n
I have updated this, still seemed to throw up the error with v1.0, v1.1 seems fine 100% of the time.
OK, I feel like a bloody moron and a total newbie here! I have tried importing the regfile with PHM Registry Editor, but I can't seem to do it. Could you please tell me what you use?
1.1b is now up.
cache has been increased.
ill make a cab later to make it easier. this works fine for me now even over some pages tht still didnt quite seem to load fully in 1.1
Great, thanks! Maybe I can install it as well then... I was actually wondering why eBay wouldn't load while I was looking for some stuff in bed last night, but this explains it. Does this help on the pitiful speed of loading the pages as well? I don't think eBay and IMDB were that slow to load on the WM2003SE I used before. Or were they?
speed doesnt seem to bad to be honest. id say its equally comparable to 2003se.
ill get tht cab made up now.
ok here it is,
the cab as promised.
Thanks! But I don't know if I have done anything wrong. I try eBay's front page, and after a while I see "The page cannot be displayed og downloaded because the connection was lost. Check the connection and try again later." This is with WiFi. I installed the cab, turned the unit off for around 30 seconds and then soft reset it. Isn't that the way to do it with this WM5 ROM?
Edit: Sorry, I didn't get the part about turning the unit on again before the soft reset. Trying it now. (This ain't my day!)
Edit 2: Nope. Didn't work that way either. :?
Hmm... weird... first time I installed WM5: I had nooooooooo problmes using PIE with WiFi and "big" sites. Now, on my 2nd try with WM5 I have those problems.
I'll try the patch later and write down what's going on.
Heres another patch which is slightly updated, v1.2. It has the following changes:
1. Makes pages load faster having more connections per server.
2. The timeout time has been increased so that the page will load for longer and wait for the page to fully load before displaying the connection lost error.
3. Cache of ssl pages has been disabled.
Mastiff said:
Thanks! But I don't know if I have done anything wrong. I try eBay's front page, and after a while I see "The page cannot be displayed og downloaded because the connection was lost. Check the connection and try again later." This is with WiFi. I installed the cab, turned the unit off for around 30 seconds and then soft reset it. Isn't that the way to do it with this WM5 ROM?
Edit: Sorry, I didn't get the part about turning the unit on again before the soft reset. Trying it now. (This ain't my day!)
Edit 2: Nope. Didn't work that way either. :?
Click to expand...
Click to collapse
Mastiff: Please use the latest version and tell me how u get on...
I don't have that problem
I use the first patched version how about you?
Ye im using the first patched version...
Its weird why some users are having the problem and others are not...
Can u load ebay ok without applying my patch?
No. Sorry. I still get the message. Also I don't feel that this version is faster than the previuos. Weird! Do you use it on GPRS or on WiFi? I never surf on anything else than WiFi, maybe that's the thing?
s1nn0n said:
Ye im using the first patched version...
Its weird why some users are having the problem and others are not...
Can u load ebay ok without applying my patch?
Click to expand...
Click to collapse
That's the crazy thing: first time I installed WM5 on my PH20B1 BA, I had no problems with eBay and other much bigger sites... then I went back because of the performance to WM2003SE, had there the phone problem and several others, so I switched again to WM5 and NOW I have those problems with the PIE... First time I had the v1 WM5 and now the "v3" - that's the only difference. However, I'll try out that patch.
Mastiff said:
No. Sorry. I still get the message. Also I don't feel that this version is faster than the previuos. Weird! Do you use it on GPRS or on WiFi? I never surf on anything else than WiFi, maybe that's the thing?
Click to expand...
Click to collapse
Just loaded ebay.com with the craddle connection and didn't have any problem.. I used WiFi with other sites and never saw that problem... Tomorrow i can try loading it at a wifi connection
OK, I just tested. eBay works with the cradle, but not with WiFi.
I tested it over wifi and works fine.
No patch applied (only the 1st patched rom version)
I still can't see the buttons.. I guess we need the Hima's IE Registry
I have those problems w/ PIE since i have the patch 3 version from WM5, with the very first version i had no problems concering PIE and Wifi...
I'm starting to think that the problem is WiFi itself, not just surfing via WiFi: http://forum.xda-developers.com/viewtopic.php?t=29904
I'm getting to the connection page but then it goes back to the sign in.
Working great on my phone.
can you attach the ractrl.cab you used?
Never used one, basicaly i went to the website on my phone and logged on and it asked me to register my phone. ( am an existing user btw on Imate K-jam). Software downloaded automaticaly if I remember rightly.
trjons said:
I'm getting to the connection page but then it goes back to the sign in.
Click to expand...
Click to collapse
Just tested it and works nice.
Downloaded the RACtrlCE.cab more or less automatically. And then continue...
The only thing that makes me doubting is, that I remember I tested it before on this device. I threw away the RACtrlCE.cab from my documents folder.
Maybe not allowed to throw it away? I will test in the future.
But: Works perfect and the scrolling, by pointing in the corners, goes faster than on my Qtek 9100.
I miss the larger real estate of course.
Huib
I must have used the old RACtrlCE.cab because when I uninstalled it and tried again it worked.
Your in luck mate, I found the file. But I cant find away to upload it here.
yeah, connecting to logmein and installing the cab directly from website works great!
Sorry to revive this old thread but I found it to be inconclusive.
I have the same problem as the OP: I login to their website and see my list of computers...from that point on anything I click, be it a computer or the "my accounts" section, it brings me back to the login screen. It's a complete loop.
I've been using logmein a long time and I know that the .cab file is downloaded right after you choose which computer to connect to...but I can't make it that far on my AT&T Tilt. It's just a loop.
I went back to my PPC-6700 (HTC Apache) and used my WiFi to connect to logmein and had no problems whatsoever.
Any suggestions? Should I find the .cab on my 6700 and send it to my Tilt?
Thanks in advance.
I'm impatient so I went ahead and copied the .cab file from my 6700 to my Tilt...the result is the same.
It installed fine: no errors, no message that it was made for a previous version of windows etc.
However when I go to logmein.com and try to login, I am confronted with the same loop as described above.
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
avega1027 said:
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
Click to expand...
Click to collapse
Like I said, I can log in fine. Upon choosing which computer to connect to, it brings me back to the login screen. Typically, you would choose the computer you want to connect to and then it would realize you don't have the program installed and prompt you to do so. However, whether I have installed the .cab manually or before doing so, I cannot get this far.
I got my Tilt yesterday and the only tweaking I've done is with the KaiserTweak program from these forums. If anyone can point to a specific tweak that might effect this, I'll revert it...
After more testing I found a way to get access to my computer. Instead of clicking on the computer name, click on Edit. Then scroll down to where it says "Status: Online, Connect to this computer" - You can click on "Connect to this computer" and it will work.
After making it work I went back to my computer listing screen and tried to click on the name, as usual, and it went right back to the login screen. At least this workaround seems to work fine. I'll try uninstalling the software now and letting it install on its own and see how it works from there...
After uninstalling, rebooting, testing, reinstalling, rebooting and testing some more...I have been unable to replicate my "workaround" from above. I'm left clueless as to what the problem is here and whether this is just some dumb server problem on logmein's side. If anyone can help please chime in. tyvm
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Those having problems; are you trying to access logmein using the full web site - https://www.logmein.com or logmein for PDA's https://secure.logmein.com/pda/ ? The full web site gets me in a loop, but using the site for PDA's works perfectly.
FrankyG
TomErickson said:
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Click to expand...
Click to collapse
Yeup forgot to mention that. When I log in I disable the proxy.
If i remember correcly, i had this loop problem when using opera on the kaiser to surf on logmein.com .
Used PIE instead and no more loop problem.
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
jeffreii said:
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
Click to expand...
Click to collapse
i think its for cingular's internal sites...like ringtones and that kind of madness. i doubt you'll ever need it.
Just wondering if anyone is having the same problem with telenav, or if there is a fix to it. Ive looked around the forum with search and cant seem to find anything but telenav not being compatible with custom roms.
Im using Dutty's latest rom with my Tilt and i recently just added telenav to my phone, when i bring it up, it connects fine and gets to the screen where you select "drive to" and "maps". When i try to determine my own location to record it, i hit go and it basically brings up the connecting box where it goes from 0 to 100% but it doesnt move at all for me after a few mins anywhere i go..also i cant do any routes for the same reason..it seems like its just not making a good connection when im outside. I checked my connection settings, proxy is not on..set up for medianet on both connections as i read from another persons suggestion, but still no go..
assisted gps is also turned off..i can do quik gps and everything else just fine but it hangs when trying to download the route...ive re-installed the program also but no go still.
anyone have any ideas to what might be causing this?
if this problem has been resolved, ive looked and looked in the forums but maybe my eyes are blind lol.
thanks for any help.
I'm running Dutty's latest 6.1 dated April 9 and Telenav and have no issue. Runs flawless.
ok
What are your connections settings, are you on medianet?
liquidraven said:
What are your connections settings, are you on medianet?
Click to expand...
Click to collapse
Yes I am on medianet. Proxy is disabled.
gprs setting
is your gprs setting set to chap authentication, i havnt touched this but mines set to chap, but this is auto configured when setting up the network with att?
still not working..
Yah my telenav is still hanging up at getting gps when trying to find route and my location...installed gpsgate and changed the radio to 1.58.16.27 not sure what else to try..
Can't remember, but do you download telenav through Pocket IE after you flash the custom rom?
I can't remember if it auto-decides what download you get based on your PIE useragent, or if you select the product for downloading... but if it's based on UserAgent you may run into issues...
Cellular video, for example, does not work if the UserAgent is not the Tilt
yah
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
liquidraven said:
i downloaded the cab through a txt message i received from att. i selected att and then my phone and it auto installed from there.
only thing i havnt tried is changing my rom but i dont see how that would help..im using dutty's apr 1st release.
Click to expand...
Click to collapse
First, did you Hard reset after rom flash at the "Tap here to alighn" screen? Second, did you install Telenav prior to any cooked rom flash? The reason I ask this if you got the file from AT$T while you were using a stock rom then that is fine, but if you got while you were using a cooked rom, it is probably a bad file. The reason is that most cooked roms have the PIE User agent set to TYTN II not HTC-8900 (AT$T Tilt) which could cause a corrupt download if you indeed have a Tilt. I suggest uninstall, power down, power back up and try the file I attached. I have installed it with every rom I have tried, literally dozens and never had an issue. When I say power down, power back up, dont do a soft reset. Use the power button.
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
liquidraven said:
yah i always do the hard reset after flashing. i dl'd it with dutty's apr 1st rom..i selected the file based off carrier and phone model. I will try your cab after work..im hoping it will fix it haha thanks man. Once i get home i will let you know how it went
Click to expand...
Click to collapse
Good Luck. I hope it works for you.
thanks!!
lol it did fix it..thanks
liquidraven said:
lol it did fix it..thanks
Click to expand...
Click to collapse
You my friend are quite welcome. Just glad it worked.
ugh
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
liquidraven said:
well for some reason still it seems to be taking its time when looking for a route somewhere..it gets to 10% after 2 mins and 30% after 6 mins..it was working fast as hell yesterday and i dont think it should be taking that long right?
i started up gpsgate b4 i ran telenav, its saying it has gps data coming in but no position..
im clueless..lol
Click to expand...
Click to collapse
Just a question but do you have assisted Gps enabled? If so, disable it. If that doesnt fix it, maybe try GPSTest?
I went to the m.pandora.com page on my Tilt and it said that it doesn't surport my version of phone
You can't use the website you have got to use the CAB file (attached)
I can't get the cab to run properly, is there a fix or any tricks I can do to get it to read my account?
Thank you I'll give it a try
kemp509 said:
I can't get the cab to run properly, is there a fix or any tricks I can do to get it to read my account?
Click to expand...
Click to collapse
Yes, install the program then go online to register (not through your phone, but a computer) and then you enter your login information into the phone and you're all set.
I used it...it's not bad but it runs at about 96kbs and it can be slow to load between songs....probably because of my crappy connection around here
When i run it for the first time i get some run time errors. And after i log in just sits at connecting... anyone?
can't help to much but
I am running 6.1 and Pandora works great I love it might try a few different radios as you might get a faster better connection.
EDGE definitely wouldn't work well with this. EV-DO or HSDPA should work fine though
kaiserII101 said:
EDGE definitely wouldn't work well with this. EV-DO or HSDPA should work fine though
Click to expand...
Click to collapse
I'm using it on tmobile edge and all is well
worked on att with pheonix rom
fits screen and touch works
Just installed it on my Tilt 6.1 with HyperDragon III Blackstone. Works great. I listen to Pandora all day at work.
KonAitor said:
When i run it for the first time i get some run time errors. And after i log in just sits at connecting... anyone?
Click to expand...
Click to collapse
Exact same thing here. I am using HTC's win mo 6.1 rom upgrade.
using it with 6.1. Um, it works really well but sometimes if I hit stop the song won't stop playing. So from there I try to close the program but can't. So then I go to the task manager and close the program... and the song still keeps on playing after the program has been closed! I end up having to reboot the phone to make it stop! lol! It doesn't happen all the time, just a few times, but still is very annoying.
been looking for this for a while now. Big up's to XDA
Works great for me, love it! Just wish it wouldn't stop periodically to ask me if I'm still listening...
kaiserII101 said:
You can't use the website you have got to use the CAB file (attached)
Click to expand...
Click to collapse
is this still working for people? i can't even get it to install. says installation unsuccessful as soon as i try to open.
SpeedCheeser said:
is this still working for people? i can't even get it to install. says installation unsuccessful as soon as i try to open.
Click to expand...
Click to collapse
I have it working on mine
6.5?
Does this work with Win 6.5? I keep getting connection errors on 3G and WiFi.
I'm running WM 6.1 and i keep getting debug errors and once i finally get past that issue it just sits at the Pandora blue screen and doesnt do anything. Anyone know of a fix for this?
--------------------------------------------------------------------------------
Well, after flashing like 150 roms so far, today i had this mysterious problem.
After flashing NRG's 6.5 ( with the new manilla rom ), i flashed into his new one, the 06/20, and then i flashed to duttys 3.9.
Now my gps simply wont work, i mean all the programs find it, but i get no signal whatsoever, not even one single satellite. What do you guys recommend to do ?
I will flash a stock rom now and see if that fixes anything.
PS : Flashing stock rom didnt do nothing.
Please someone help
GPS Problem
Hi
Try Start, settings, connections, connections, advanced, Select networks and set correct values in both dialogues!
What applicatons are you using for GPS?
I dont think the connection settings are completely relevant but make sure not in flight mode and that if you have entered SIM PIN that phone module is functioning, which I guess could be linked back to the operator settings, but GPS should still work regardless.
The stock settings for hardware should not need changing aa far as GPS is concerned.
If the above isn't any help, try hard reseting a few times (take out your storage card first though) as it could be due to some user customisation thing
jones2000 said:
Hi
Try Start, settings, connections, connections, advanced, Select networks and set correct values in both dialogues!
Click to expand...
Click to collapse
What does this has to do with my GPS ?
homer285 said:
What applicatons are you using for GPS?
I dont think the connection settings are completely relevant but make sure not in flight mode and that if you have a SIM PIN that phone module is functioning, which I guess could be linked back to the operator settings, but GPS should still work regardless.
Click to expand...
Click to collapse
Destinator 7 and igo8 mostly.
sedde said:
What does this has to do with my GPS ?
Destinator 7 and igo8 mostly.
Click to expand...
Click to collapse
Have you tried in igo8 goto the GPS settings, untick the box then let igo8 find the GPS by using the option?
Oh and we're assuming you have hardreset after flashing?
homer285 said:
Have you tried in igo8 goto the GPS settings, untick the box then let igo8 find the GPS by using the option?
Oh and we're assuming you have hardreset after flashing?
Click to expand...
Click to collapse
Ofc i did hard reset it, more than 2-3 times, and yes i have chosed to find gps automatically. Nothing does the trick, i think the module is broken.
First things first before checking it out with sofware like iGO
Have you tried the 'HTC GPS tool' ?
Remember if you just flashed then you do a complete coldboot of the GPS module.
So go outside and wait up till 10 minutes with the gps tool --> 'open port'
Let us know how that goes!
I don't main to sound patronising but have you downloaded latest info using QuickGPS??
Fallen Spartan said:
I don't main to sound patronising but have you downloaded latest info using QuickGPS??
Click to expand...
Click to collapse
You dont, yes ofc i did.
I have 2 htc hd's infront of me now, and one is picking sat's in 10 seconds and the other wont find even one.
Fallen Spartan said:
I don't main to sound patronising but have you downloaded latest info using QuickGPS??
Click to expand...
Click to collapse
Not to say that it wont work but I dont use that application and always get a pretty quick fix, 30-60 secs, even inside my house.
sedde said:
You dont, yes ofc i did.
I have 2 htc hd's infront of me now, and one is picking sat's in 10 seconds and the other wont find even one.
Click to expand...
Click to collapse
Damn that doesnt sound good, Id try everything from, flashing the ROM through RUU mode without SD inserted, reflash SPL and phone module, clean and format SD card. Also copy the iGO8 folder from the working device to the other SD card and run the .exe directly from location, just to be certain. Good luck.
Was a long shot, just checking all bases
It isnt a long shot
Ok now i am facing another problem.
How can i go back to 1.14 stock rom ? I just flashed it and i get the green screen..
PS : Nevermind i will restock the spl and use uspl, wont that do the trick ?
and what did 'HTC GPS tool' report?
lukesan said:
and what did 'HTC GPS tool' report?
Click to expand...
Click to collapse
if you can provide a .cab for it i will let you know, but i am currently preparing it to take it back to service.
PS : By flashing back to 1.14 and getting the green screen, all i had to do is reflash stock 1.14 spl ( just for knowing ).
Here you go
http://forum.xda-developers.com/showthread.php?p=3004081
lukesan said:
Here you go
http://forum.xda-developers.com/showthread.php?p=3004081
Click to expand...
Click to collapse
give me 5 mins to check it.
I hope the service guys wont give me a hard time fixing it or replacing it or i will be really sad to buy a new one
PS : No gps tool did nothing as well, no fix , not even a single satellite and after pressing the test button, it was resetting it after 5 seconds of testing it.
I am really sure its the module
just take it easy.
Sometimes it is best to let it, meaning yourself, rest a couple of hours to start troubleshooting again.
Wait atleast 10 minutes outside while it starts gathering information and preferably leave the Touch on a device that stands still, so not walking around
sedde said:
What does this has to do with my GPS ?
Destinator 7 and igo8 mostly.
Click to expand...
Click to collapse
Both Google maps and TomTom uses AGPS!
At least on my phone, that reduces connection time conciderably!!