Hello everyone! I'm wondering will this device work with AT&T service since it's just a triband phone, and, afaik, AT&T uses 850MHz as their primary frequency for GSM calls (depends on location) in NYC area.
Coverage maps are here:
http://www.gsmworld.com/roaming/gsminfo/cou_us.shtml
Specifically the 1900Mhz map is here and you can zoom in to your area and see: http://www.gsmworld.com/cgi-bin/ni_map.pl?cc=us&net=be
[You can probably also find them some place on the AT&T website.]
Be aware tho that the diamond only does 3G at 900/2100, but AT&T use 850/1900. That means you won't be able to use 3G capabilities on AT&T anywhere.
I would either wait for the american version, or buy the 2G one they're selling in india for ~200$ less.
Thanks, man! Maybe i'll look at T-Mobile plans, looks like device will work with them
Well looking at the page it looks like T-Mobile have even less 1900 coverage (GSM). I don't know their current 3G situation, but they will be/are using 1700Mhz for 3G, which the diamond can't handle either
I haven't found any answers so I've decided to "ask the audience".
To my understanding the Rogers Canada network uses 850/1900 for it's 3G primarily 850. Is this true?
I haven't found a mention of a North American release date for the GSM Diamond. Anyone know the date? I don't expect it till around Christmas.
I'm looking at an Australian Diamond that uses the 850/2100 bands for 3G. Will the support of the 850 band be enough to function on the Rogers network or does the phone have to support both bands for 3G to function on the network?
only gsm 850 works on my diamond. i think its 1900 for 3g
I have an European Diamond which works on the rogers network but I get GSM/EDGE but to my horror no 3G
Looking around only on a few sites can I find any mention of what works and what doesn't the closest information I could find is from this link:
http://forums.whirlpool.net.au/forum-replies-archive.cfm/843038.html
NextG phones are 850/2100 capable, so you'll be right on most 3G networks...
Click to expand...
Click to collapse
WILL get UMTS 850 signal in Cingular 3G coverage areas in the states...
Click to expand...
Click to collapse
But someone also says
850MHz UMTS coverage on Rogers in Canada, but you still can't get next g
Click to expand...
Click to collapse
and they go back and forth so I'm not sure what to believe and I don't think I want to buy another Diamond just to find it won't work either.
http://www.geekzone.co.nz/Jama/585 has some interesting comments as well but I'm not sure what to believe.
Can anyone confirm or deny and of this?
The question is will a Australian phone with the 850/2100 3G radio function on the Roger network?
nosgop said:
The question is will a Australian phone with the 850/2100 3G radio function on the Roger network?
Click to expand...
Click to collapse
I have the Australian version (850/2100 MHz) and it supports the Telstra 3G Network. Can't see why it wouldn't work on other 850/2100 MHz 3G network.
To my understanding the Canadian Rogers network is a 850/1900 network.
Does the phone need to support both bands or will one suffice?
Rogers Diamond
I had an EU/Asia Diam and I never manage to get 3G connection. Sold the phone and bought a Rogers branded diam and by default I see 3G connection all the time on the top network status. But now I'm thinking of going back to an EU/Asia version unless I can flash my Rogers branded diam with a better ROM.
So good news for all Diamond euro owners in LA (and other places of course)...the tmobile network supports the 2100mhz band for 3G so no need for a US version!!
http://support.t-mobile.com/knowbase/root/public/tm23715.htm#7
Sorry if this is old news, but i just realized it =)
this is great if true?
T-Mobile devices use the 1700Mhz/2100Mhz frequency band (for 3G) and I thought Europe 3G devices use 900Mhz/2100Mhz. Could U clarify further...
you said it correct...tmobile does use 1700mhz/2100mhz, and the euro diamond supports 2100mhz which should work since tmobile will be using it...i spoke to a tmobile tier 2 rep, he confirmed it as well...
That can't be right. T-Mobile AWS 3G uses the 1700 MHz band for uplink and 2100 MHz for downlink. I doubt T-Mobile US set up aside any channels in the 2100 MHz band as uplink channels.
It's kind of academic, as I can't get 3G on T-Mobile USA using a Euro Diamond in NYC, where we've had 3G deployed for a few months now. I've never heard of anyone else doing it either. Oddly, there's a "UMTS(1700)" selection in the band settings in the phone control panel, but if I try selecting that, it just jumps back to using T-Mobile's normal PCS band with EDGE for data.
If that tier 2 tech can get you onto AWS 3G with your Diamond, definitely let us all know about it, but don't get your hopes up too high.
Drachen said:
That can't be right. T-Mobile AWS 3G uses the 1700 MHz band for uplink and 2100 MHz for downlink. I doubt T-Mobile US set up aside any channels in the 2100 MHz band as uplink channels.
It's kind of academic, as I can't get 3G on T-Mobile USA using a Euro Diamond in NYC, where we've had 3G deployed for a few months now. I've never heard of anyone else doing it either. Oddly, there's a "UMTS(1700)" selection in the band settings in the phone control panel, but if I try selecting that, it just jumps back to using T-Mobile's normal PCS band with EDGE for data.
If that tier 2 tech can get you onto AWS 3G with your Diamond, definitely let us all know about it, but don't get your hopes up too high.
Click to expand...
Click to collapse
AWS?? well the tier 2 tech did say it...i dont know if he was just talking out of his ass or not...but we'll see in the coming weeks...ill try to get tmobile rep on the phone again to ask them how i can get it...or if i can, even though its supported..
Malik05 said:
AWS?? well the tier 2 tech did say it...i dont know if he was just talking out of his ass or not...but we'll see in the coming weeks...ill try to get tmobile rep on the phone again to ask them how i can get it...or if i can, even though its supported..
Click to expand...
Click to collapse
As I understand it, if a phone says it supports 2100 it is referring to the UMTS Band 1 used in Europe which is 1920-1980MHz Uplink & 2110-2170Mhz Downlink (see UMTS Frequency Bands - Wikipedia). The 1700AWS Band (UMTS Band 4) uses 1710-1755MHz Uplink and 2110-2155MHz Downlink. So, while they do overlap some they are not identical (A Visual Guide to AWS - PhoneScoop)
So, I don't believe that a phone with 2100 EU support will work with T-Mobile 3G because it doesn't support the 'right' 2100 nor the 1700. Likewise, I don't believe that a phone with 1700 support will work for 2100 EU.
If you want to get technical the "US" Diamond won't work for 3g on T-Mobile either. The 3g band is only for 850/1900. (so i guess we're screwed either way) I'm in Salt Lake City and I don't believe Utah is slated to get 3g until 2009 at this point. I bought the diamond knowing full well that 3g was going to be a slim possibility on this phone. However, a user with a DIAM100 is claming that he's been getting 3g service on T-Mobile in NJ. He said that he'd post screenshots.. I don't know if he's done that or not. I guess all we can do is wait and see.
RavenGirl said:
If you want to get technical the "US" Diamond won't work for 3g on T-Mobile either. The 3g band is only for 850/1900. (so i guess we're screwed either way) I'm in Salt Lake City and I don't believe Utah is slated to get 3g until 2009 at this point. I bought the diamond knowing full well that 3g was going to be a slim possibility on this phone. However, a user with a DIAM100 is claming that he's been getting 3g service on T-Mobile in NJ. He said that he'd post screenshots.. I don't know if he's done that or not. I guess all we can do is wait and see.
Click to expand...
Click to collapse
Do you know who this user is? maybe i can PM him and get some details...i knew i wasn't going to get 3G with the diamond, but after talking to the rep. i kind of want to look into it more since there may be a possibility.
RavenGirl said:
If you want to get technical the "US" Diamond won't work for 3g on T-Mobile either. The 3g band is only for 850/1900. (so i guess we're screwed either way) I'm in Salt Lake City and I don't believe Utah is slated to get 3g until 2009 at this point. I bought the diamond knowing full well that 3g was going to be a slim possibility on this phone. However, a user with a DIAM100 is claming that he's been getting 3g service on T-Mobile in NJ. He said that he'd post screenshots.. I don't know if he's done that or not. I guess all we can do is wait and see.
Click to expand...
Click to collapse
Honestly I'm gonna go ahead and call BS on him for that, I've never heard of anyone getting T-Mobile 3G and I know quite a few people with the Diamond/Raphael on T-Mobile in 3G areas.
wpsantennas said:
As I understand it, if a phone says it supports 2100 it is referring to the UMTS Band 1 used in Europe which is 1920-1980MHz Uplink & 2110-2170Mhz Downlink (see UMTS Frequency Bands - Wikipedia). The 1700AWS Band (UMTS Band 4) uses 1710-1755MHz Uplink and 2110-2155MHz Downlink. So, while they do overlap some they are not identical (A Visual Guide to AWS - PhoneScoop)
So, I don't believe that a phone with 2100 EU support will work with T-Mobile 3G because it doesn't support the 'right' 2100 nor the 1700. Likewise, I don't believe that a phone with 1700 support will work for 2100 EU.
Click to expand...
Click to collapse
I have the USA sold "quad band" euro diamond distributed by htc USA. This is essentially re-flashed euro diamond hardware sold to support american networks, not the 850/1900 newest USA 3G diamond compatable with AT&T. I have looked into this issue and also talked to T-mobile and there seems to be alot of confusion regarding T-mobile's AWS USA 3G network (or maybe they have simply confused me). Here is what I have found out: Assuming they are correct, they are telling me 3G voice for T-mobile usa runs in both the 1700 AND 1900 mhz band, and therefore my euro diamond shoud be supported at 1900mhz for voice 3g support. This 1900mhz is part of the "quad band" voice radio hardware on the euro diamond. Data (AWS 3G for USA) "HSDPA" , which T-mobile has not yet released, runs in the 2100mhz bandwidth, and Data AWS "HSUPA 3g" runs in the 1700mhz bandwidth. Therefore my hardware would not support HSUPA @ 1700mhz, but would support the HSDPA @ 2100mhz. As to the idea that euro bandwidths are different than USA bandwidths, well apparently they are. For example "2100mhz" networks in europe might be actually using 2110mhz-2170mhz, whereas in the USA T-mobile's network may use 2100-2140mhz actual bands. However because these are close and still in the 2100mhz band, there should still be compatability with 2100mhz hardware radios regardless of networks varying the bandwidth slightly.
Of course this may be too optimistic, but it would be very cool if true and I am hoping for the best .
sureloch said:
I have the USA sold "quad band" euro diamond distributed by htc USA. This is essentially re-flashed euro diamond hardware sold to support american networks, not the 850/1900 newest USA 3G diamond compatable with AT&T. I have looked into this issue and also talked to T-mobile and there seems to be alot of confusion regarding T-mobile's AWS USA 3G network (or maybe they have simply confused me). Here is what I have found out: Assuming they are correct, they are telling me 3G voice for T-mobile usa runs in both the 1700 AND 1900 mhz band, and therefore my euro diamond shoud be supported at 1900mhz for voice 3g support. This 1900mhz is part of the "quad band" voice radio hardware on the euro diamond. Data (AWS 3G for USA) "HSDPA" , which T-mobile has not yet released, runs in the 2100mhz bandwidth, and Data AWS "HSUPA 3g" runs in the 1700mhz bandwidth. Therefore my hardware would not support HSUPA @ 1700mhz, but would support the HSDPA @ 2100mhz. As to the idea that euro bandwidths are different than USA bandwidths, well apparently they are. For example "2100mhz" networks in europe might be actually using 2110mhz-2170mhz, whereas in the USA T-mobile's network may use 2100-2140mhz actual bands. However because these are close and still in the 2100mhz band, there should still be compatability with 2100mhz hardware radios regardless of networks varying the bandwidth slightly.
Of course this may be too optimistic, but it would be very cool if true and I am hoping for the best .
Click to expand...
Click to collapse
Unfortunately, they've provided you some bad information. Each frequency band/range has a pair of uplink and downlink frequencies - you can't use one without the other - you have to use both. Generally, the uplink and downlink frequencies are relatively close to each other however, the 1700 AWS band has uplink and downlink spread quite a distance apart. Uplink is in the 1700MHz range, downlink is in the 2100MHz range and both have to be used. In the US, 1700 & 2100 is essentially one band.
1900MHz (the PCS band) isn't 3G for T-Mobile (although they technically could put it there at some point.) Right now, 1900MHz for T-Mobile is EDGE voice and data. Most other carriers do have 3G on the 1900MHz band, T-Mobile just doesn't have enough spectrum available in that band.
In short: A phone that supports UMTS 2100 will not work for T-Mobile US 3G. A phone that supports AWS/UMTS 1700 will work for T-Mobile US 3G but not for European 2100 3G. (And 1900MHz PCS will give you traditional EDGE on T-Mobile US.)
Malik05 said:
Do you know who this user is? maybe i can PM him and get some details...i knew i wasn't going to get 3G with the diamond, but after talking to the rep. i kind of want to look into it more since there may be a possibility.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=427755
post 3, ll
and
http://forum.xda-developers.com/showthread.php?p=2610960#post2610960
im wondering. is there any way i can get 3g working on my unlocked atat tilt 2. im using cincinnati bell wireless now but im thinking bout switching phones because i cant use 3g thx.
Snooping around the net, I've found that Bell Wireless in Cincinatti uses 1700/2100 MHz bands for 3G. Both bands are needed for 3G (one is upload, one is download), similar to T-Mob.
The At&T Tilt2 isn't compatible with the 1700 MHz band. Its a hardware issue, so no software or tweaks are going to get you 3G. If you get an unlocked T-Mob branded version of the Touch Pro 2, it should work on your network's 3G.
This should be in the General section, not ROM Development.
Hello everyone!
I bought a HTC HD7S (AT&T) for use in Brazil, but my carrier only has 3G on the 2100MHz frequency.
I saw elsewhere that there are versions of this mobile working in 3G 850/1900/2100 and only 3G 850/1900 (unfortunately, mine/AT&T).
Is there any way to make my phone connect also on 2100MHz?
This is my first Windows Phone, and for me is a novelty. I never had problems like this with an iPhone.
Thanks!
you can't, search for why