Database Develop

Heelp.. dead and I cant even run in USB mode

Hi,
I have a k-jam and I was trying to update it to the custom ROM. it hanged at 98% and the update software crashed on my PC so I had nothing to do but soft resetting the device.
Now I cant restore to the original imate ROM and when I try to go to the USB mode it gives the colored screen and goes off immediately.
Please help...

hey i have had that problem stuck for 2 days, must be stressing eh?
hold camera + voice then push reset button for 3 seconds...keep holding the cam and voice button and wait for the screen to come on..then plug in.... usb shud show on bottom left..
i had that problem....couldnt get it to boot loader but after numerious tries, it worked.

It just needed some power
Wizard was totally discharged i recharged it and restored the ROM successfully
thank u

HELP!!! Cannot enter 3 color Update mode any more !!!

Hi everybody
i use a
Orange SPV 3000 cid/sim unlocked
WM 6 NBD 7.3
IPL / SPL 2.26
GSM 02.25.11
OS 5.2.1413 (Build 17913.0.3.0)
Now i tried to go back to the latest German ROM Update provided by ORANGE CH.
(RUU_Prodigy_21611_2161111_010410_OR_CH_GER_Ship.exe)
The Update Process start's on the PC Screen and remains on 0% and will terminate with ERROR [260]: UPDATE ERROR
The Phone hangs and cannot enter in "3 color update mode".
I have to take out and reinsert the battery to bring the Wizard back to Work.
Then the Wizard start's up and you can work without any Problems. (Exept you have to set the Date / Time again it is set to 2006-02-14 12:00)
Next Steps
- did a Reboot on the PC and the Wizard -> Same Result
- tried to Flash NBD 7.3 ROM again -> Same Result
- did a Hard Reset (press the 3 Buttons on Reset then Send Button ) and tried to Flash again -> Same Result
- tried to manualy enter Update mode (press Camera Button on Reset) with the same Result the "3 color update mode" will not appear
Has anybody a Idea what else i can do?
Tnx in advance for any HELP

when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.

mdajunkie said:
when manually entering bootloader mode are still holding the camera button in after the reset button is released? I usually hold for about 5 seconds after the reset button is released. im sorry if that don't work for you. never heard of anyone having trouble not getting into bootloader before.
Click to expand...
Click to collapse
dear mdajunkie
now i can enter bootloader mode manually
looks like i did not hold the camera button long enough before
thank you very mutch for your HELP
I assume the Problem is locatet on the PC and have to find out why i can't flash my Device again.
Recently i changed something on the PC - I installed a external BlueTooth-Dongle from MSI including the MSI BlueTooth Software
Starting now with the easyest step - reinstalling Active Sync 4.5 and try again.
Regards

Now everything works fine
I tried to Flash a ROM and it work's
i did not change anything exept entering the bootloader mode manually once.(no reinstall activesync or deinstall bt software !)
May be entering the Bootloader Mode manualy "cured" my PDA?
i don't know
Regard's

im glad you got it to work. Most important thing is to read make sure you know how to and are confident enough flash roms. Makes things a whole lot easier. Atleast that way if something goes wrong you will be able to backtrack a lot easier and maybe explain your situation a whole lot better. Hope everything else goes wonderful for you and have fun man.

Need Experts To Solve This One....

Hi guys,
Today my D2 decided not to work at all when switching "ON" the screen stays at the windows mobile welcome screen and refuses to continue "Freeze".
I tried soft and hard rests without success...
Anybody can help please?!!!....

Doesn't sound good.
The next thing I would try is to take the battery out for about 30 minutes, then try again with battery replaced. I had a weird issue with an old PDA where on ocassion it would refuse to turn on, and the only fix was to leave out the battery for at least 15 minutes.
Good luck

Hi, though your question has nothing to do with any kind of development, , maybe you should be posting in general section, this is a wild guess, the answer to your question is easy, enter bootloader and flash the oficial rom suited for your device.
If this doesn´t work send it to your distributor.
Cheers.

ark666,
Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?

dm03 shm3h said:
ark666,
Could you please show me how to enter the bootloader and flash the oficial rom suited for my device?
Click to expand...
Click to collapse
Should i know???
By pressing volume down + the red soft reset button will take you to the bootloader.
The Topaz is yours, what language is it??
Maybe this post will help you:
http://forum.xda-developers.com/showthread.php?t=507232

I went to the bootloader by pressing volume down + ON/OFF button. However, at the bottom of the screen it says (Serial)...
My Topaz language or original ROM is (RUU_Topaz_HTC_WWE_1.39.405.2_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship).

volume down + the red soft reset button will take you to the bootloader.
Download the rom and flash it in bootloader, (tricolour screen).
Sorry but i can´t make it easier.

ark666,
I already went to the bootloader (tricolour screen) and I have a copy of the rom (at my desktop). The point here (correct me if I'm wrong) to flash it in the bootloader by doing these:
1- Go to bootloader....
2- Connect D2 to my PC through USB cable...
3- Then run the downloaded ROM...
Sorry but I'm still new to PPC....

Flashed the origial ROM and problem solved.
THX

please help, my diamond won't boot up at all

Dear friends,
I was trying to flash my diamond with mtty, where i guess i messed up with commands, I formatted it, then tried to restart with "task 8" then my phone turned off and never on again no matter what i did or key pushed.
Any help will be much appreciated...

me too
but i don't know how to use Jtag recover BL for Diamond

Update ROM by using the BootLoader
Hello there,
even though you can't boot into your OS in the Diamond, there's a way to enter "BootLoader" mode. I'm not sure it works, but you can give it a try.
Here's how:
- Connect the Diamond to your PC
- Enter bootloader mode on your Diamond: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
- Use the ROM Update Utility. If the previous step worked and your connection is working, then with some luck you will be able to Flash the Device with the ROM update utility.
I've tried to find the thread that discussed this with pictures and such but couldn't. You might want to look for similar instructions
Good luck
Shane

JTAG
does anyone managed to JTAG diamond?

Help! I can't enter to bootloader. (waiting)

I bought an X1 from second hand with a cooked ROM. I then tried to flash another ROM with RUU. It stucks in 34% then error appeared. Following with RUU's recovery instuction, it got same problem in 39%.
I then tried to flash hard-SPL again with succeed. However, the phone reboots then stucks in the SE Bootloader Screen and can not be turned on again.
I found a strange problem which I couldn't even enter to the tri-color bootloader screen when my phone handed on.
(my phone is Sony Ericsson X1i)
Thanks in advance.

I can't even hard-reset my phone.
I am waiting for my battery charged upto 100%. Hopes it work.

seasonlau said:
I bought an X1 from second hand with a cooked ROM. I then tried to flash another ROM with RUU. It stucks in 34% then error appeared. Following with RUU's recovery instuction, it got same problem in 39%.
I then tried to flash hard-SPL again with succeed. However, the phone reboots then stucks in the SE Bootloader Screen and can not be turned on again.
I found a strange problem which I couldn't even enter to the tri-color bootloader screen when my phone handed on.
(my phone is Sony Ericsson X1i)
Thanks in advance.
Click to expand...
Click to collapse
it can't be turned on because there is no OS installed on your phone now, take your sd card out and place an rom image renamed to kovsimg.nbh in the root of your sd card through te pc. put it back in your phone, just start and it will enter bootloader again, and (if everything gone as it should be) it will open kovsimg.nbh, press power button, and wait

Thank you for replying my post.
But the problem is I can't even enter to tri-color screen by holding volume down and power.
Any advice? Thanks.

seasonlau said:
Thank you for replying my post.
But the problem is I can't even enter to tri-color screen by holding volume down and power.
Any advice? Thanks.
Click to expand...
Click to collapse
what does your phone do now when you start it then?

It stucks in the SE Bootloader screen.

seasonlau said:
It stucks in the SE Bootloader screen.
Click to expand...
Click to collapse
I misunderstood you, tri-colour screen is the bootloader/SPL.
Your stuck on the SE logo booting screen..
I'm very sorry, but i really have no idea, how you could fix that..
If you can't get in the tri-colour screen, then there is nothing you can do.
sorry
maybe someone else can help you

Thanks for prompt reply.
But do you think X1 require 100% fully charged battery to enter the tri-color bootloader?

no it doesnt need to be 100% charged

What happens when you connect your x1 through usb with the computer?
Does your pc recognize the x1?

same problem, x1a dead , the pc recognize "Microsoft USB Sync",

If you've already Hard-SPL'd your device, chances are if your device gets recognized as Microsoft USB Sync (Even if activesync won't start) you can use the ruu_update tool to send the rom to your phone. This process (if successful) will automatically boot you into the tri-color screen approx 2-3 minutes in.
Hope this helps, and Good luck

For advice or help on flashing roms, please post your query in this thread
Thread closed