I just got a Diamond, put in my AT&T SIM, and let it automatically set up the connection for me. It set me up using wap.cingular. This delivers very fast internet, BUT, it won't stay connected to my exchange server for more than a few minutes (I have it set to sync as items arrive, and leave activesync always open on the phone). I tried doing a hard reset, then manually entering my settings (isp.cingular, [email protected], etc.) which works for exchange (it stays connected) , but when i run speed tests I end up only getting about 200k. Any ideas?
anyone with the DIamond on AT&T
Is there anyone else out there with a Diamond on AT&T using an exchange server connection? If so, would you mind sharing your data connection settings?
I am using the stock setup for AT&T. All I had to do was turn off the proxy server and it works fine.
do you use an exchange server connection? When you say you use the default setup, do you use wap.cingular or isp.cingular?
You shouldn't see either if you let auto setup configure the exchange server for you. The auto setup will check proxy server for you in the process. You should then be on MEdia net
(modem tab), with wireless.cingular appearing in the dimed box for name of the proxy server.
found the setting, I changed it and will report how it works. Thanks
tzour said:
You shouldn't see either if you let auto setup configure the exchange server for you. The auto setup will uncheck proxy server for you in the process. You should then be on MEdia net
(modem tab), with wireless.cingular appearing in the unchecked/dimed box.
Click to expand...
Click to collapse
the auto setup will turn the proxy for medianet on, since it's needed for it to send mms.
Related
I am having some issues with setting my proxy settings on my Tilt. The HTTP proxy is wiped out once they are set.
Here is what I am doing to create the problem
I go to Start ->Settings ->Connection Tab ->Connections ->Advance Tab ->Select Networks and change both settings in this menu to use "My Work Network" for both settings, and then set the proxy settings for "My Work Network" to use my corporate proxy, everything works fine until I enable a WLAN connection. After I enable the connection the proxy information disappears.
I guess I don't understand why the proxy settings disappear once a live WLAN connections is set.
Does anybody know how I can fix this.
I have tried running the no proxy cab which didn't help.
Thanks for any help
I am so frustrated I want to take this thing back to the store if I can't use it on my corporate network.
it probably does this since the proxy gets sent to you once you connect to a network, and the WiFi connection you are connecting to tells the Kaiser it needs no proxy... your corporate network should sent the proxy automatically, mine does (the wired one, not WiFi)
I called HTC support and they said this was a Mobile 6 bug. They said that they are going to work with MS to create a fix for this issue.
My thoughts are on this, is this going to affect a massive amount of user who have to connect through proxy on their corporate network.
This sucks cause I'm to cheap to pay for the data plan.
Holding my breath for a QFE from Microsoft. I sure not to soon though.
That isn't a WM6 bug. I have an ASUS device, which makes no problems with the proxy settings. It is probably a WM bug combined with the HTC specials.
Regards
Possibly found a solution
http://forum.xda-developers.com/showthread.php?p=1990412#post1990412
Neil
First I don't post much usually because I can find the answer by searching, however I have not seen this one.
My kaiser will not sync to OWA when on the ATT network at all. It will sync fine from any wifi spot (be it at work or home), but it will not sync at all if I am on edge or 3g. I am using the HTC shipped rom on the ATT tilt.
If it were a active sync settings problem then why would it work over wifi, I though the mechinism was the same either way. I don't think it is a internet settings problem either since I can browse just fine.
Couple of closing thougths.
1. I have hard reset (twice) with no luck.
2. I have set up several other WM5 and WM6 on our network with no problem, all using the same corporate ATT account..
3. I have tried it with Direct Push on and off.
4. Please don't post "mine works fine" without any advice, it just clogs up the thread for no reason.
Here are my connection settings.
Internet
Access Point: wap.cingular
User: [email protected]
Pass: Whaterver HTC put in
Domain: blank
Thanks for the help, I am really baffled here.
Is your proxy server enabled? If you have the default Tilt ROM there should be two icons in the Programs | Tools | Proxy Manager folder to enable/disable the proxy. I find that having it enabled messes with OWA and the like. The only time I enable it is when I want to go to http://home for AT&T specific stuff.
.:Christian:.
I don't have a proxy set that I can tell (I am using the HTC rom not the ATT so I don't see a Tools folder under Programs). Couple other odd things. When connecting to the data for the first time, it says connecting to MediaNet. I don't have a connection setup called MediaNet the one I setup is called My ISP.
When it syn'cs it finds that there are changes (say 0/2 emails), then it gets them (2/2), it then immediately stops and never processes them. It returns a code 0x80830003 which says something is not setup right on exchange, but it is setup fine as there are 10 other WM phones that work fine.
Ok thanks for pointing me in the right direction, it was the proxy settings, but it was on the MediaNet connection. I somehow had 2 connections setup. I could not delete the MyISP one (that is the one the HTC wizard setup) so . I deleted the MediaNet connection, and renamed the My ISP one to MediaNet , then disabled proxy on the it. All is well. Thanks again!!!
Excellent!
OK so I thought I was halfway intelligent about all this but apparently not. I can't seem to get my internet sharing to allow me to tether on my new Tilt. I had it working fine on my Sprint Mogul so I know theoretically how to do it. I have the stock AT&T ROM (allowed customizations; just lazy about figuring out what I'd need of the customizations so I live with the bloat).
I created a shortcut for IntShrUI.exe in my \windows\start menu\programs folder to start the internet shar. I start Internet sharing and select USB and AT&T ISP GPRS (or MEdia Net; same result). It says connected and doesn't give me any errors but I can't seem to connect to anything from my PC or even ping anything. I'm using a Windows Vista PC. While internet sharing is connected I can connect to the web on the phone itself but not from the PC.
I was originally on "PDA Personal Max UNL + 1500 Messages" but I couldn't seem to connect to ISP.CINGULAR and I thought maybe that's why I couldn't tether (and I thought it'd probably prevent me from connecting to my corporate VPN). So I called in and the tech guy said that plan isn't provisioned for ISP.CINGULAR so he switched me to the "older" (his words) PDACnctUntlAdd which is the same price and includes ISP.CINGULAR but not 1500 messages. In hindsight I'm guessing that's not my problem (especially since it didn't fix it) and I'll prob go back to PDA Personal Max with the 1500 messages once I figure out the tethering and assuming it allows me to VPN.
My settings are:
AT&T ISP GPRS
Modem:
APN: isp.cingular
Username: [email protected]
Password: CINGULAR1 (doesn't show it but found that online)
Domain: blank
Advanced Settings:
TCP/IP: Use server-assigned IP Address
Use software compression: not checked
Use IP header compression: not checked
Servers: User server-assigned IP Address
Proxy Settings:
This network connects to the Internet: checked
This networks uses a proxy....: not checked
MEdia Net
Modem:
APN: wap.cingular
Username: [email protected]
Password: ????? (doesn't show it and never looked for online)
Domain: blank
Advanced Settings:
TCP/IP: Use server-assigned IP Address
Use software compression: not checked
Use IP header compression: not checked
Servers: User server-assigned IP Address
Proxy Settings:
This network connects to the Internet: checked
This networks uses a proxy....: not checked
I've tried to do it with the proxy disabled (running Disable Proxy from programs) and with it enabled with the same result.
So what can I be doing wrong? I'm sure it's something supremely stupid (if it's not a provisioning problem but how could it be that?) but I can't for the life of me figure out what I'm doing wrong.
Any help greatly appreciated and let me know if there's anything else you'd need to know to get this working.
If it matters I have the following installed:
Kaiser.HTC.Home.v2.0.814.722.HTCHome.Dir.With.Brig htness.Fix.Updated.01OCT2007-schen.cab
duttythroy HTC Audio Manager 1_2_816716.cab
duttythroy HTC Voice Recorder 1.10.1717.2221.cab
duttythroy HTC_SIM_Manager 6.31.cab
duttythroy Task Manager 2_0_30995_1.cab
HTC Touch Keyboard + Keypad.cab
Kaiser_BCR World_Card_1_0_070724b_x.cab
Vibra (Switch) 1.32.cab
ComMgr3G(10 Buttons)fixed.cab
cecmd.arm.cab (Total Commander beta 2.5 build 3)
HHCv10b5.CAB (HTC Home Customizer v1.0 beta 5)
LiveSearch.cab
Tillanosoft tGetFile.dll (for pocketnester)
Microsoft Office OneNote Mobile
RViewer.cab
Birdsoft All-in Hold-em
Google Maps
So your device says connected (and can surf the web) but your laptop wont connect?
So is your laptops firewall blocking the network?
Have you tried it over bluetooth, and use the BT PAN option. Select BT in ICS and click connect, and click YES to allow it to be discoverable, then in Vista, click start, connect to, Then click Set up a network or connection. Then scroll down to the bottom option (BT PAN). Click it and it will offer your device's BT PAN, select that and click connect.
Wait for 30 seconds, then open the web.
Solution from ATT-Connect your Laptop/PDA
Here ya go! Tried it myself with the usb. Workin good-ATT has a comm manager app that installs on the laptop.
Here's the link to the ATT support for it.
http://www.wireless.att.com/businesssupport/setupOTW.do?phone=ATTTilt
Alemaker
Thanks for your help; hadn't thought of turning off firewall since it worked with the mogul without doing that. Tried that and it didn't work. Then tried with bluetooth and that didn't work either. Didn't want to use the ATT comm manager on the off chance that they could track tethering usage on it.
And of course it was a stupid thing not to check but something made me try connecting to an IP address and not a URL and BAM! it worked. So I guess I have a DNS problem and not a connection problem.
So now anyone have an idea why the laptop can't resolve DNS but the Tilt can? Should I manually set free public DNS servers on the Tilt? Or on the laptop?
Vista you said? correct?
Try making the network that Vista sees when you connect-private; if it's public,it'll block stuff
Yeah, it's already set to private. Still no DNS resolution. I'm going to try using a free public DNS server on the PC. Strange that the Tilt isn't passing thru DNS for me but it seems it is for everyone else.
Well using the free DNS servers (208.67.222.222 and 208.67.220.220) seems to work now and it even seems to resolve DNS faster. I feel better that I figured out how to get it to work but I'm definitely confused as to why it doesn't work by default like it does for everyone else.
get tethering working yet?
hi,
i have the same issue. have unlimited data plan on my tilt. no problem with connection on my tilt (although i did not put in all that proxy setting crap att asks you to put in).
anyhow
- installed the htc modem driver on my laptop.
- turned on the modem on the tilt
- created a new dialup connection on my xp laptop
---> question here, what is the "phone number" that should be dialed???
--> for [email protected], password is CINGULAR1 also
as a last resort i will try using the att comm manager, but like you i don't really want to do it due to any tracking att may be doing...
would be great to hear if loading that local dns resolves your problem, altho it seems kinda clugey (sp?)
lol-
ya'all kill me.
Anything at all,including data; going through any major network in the U.S., is tracked- period. Cell calls,data,internet connections, and even landline calls are ALL tracked in the U.S. now. Thanks to the current administration, EVERYTHING is tracked.
Alemaker
I meant tracked in terms of tethered vs non-tethered (not being on a tethered plan; but then I tether about once a month when travelling in airports if that so I'm not worried about it). I know big brother is always watching (especially on AT&T):
http://abcnews.go.com/Politics/Story?id=3833172&page=1
@jprai I did get tethering working by just changing my DNS settings on the laptop to free servers. I'm not using wireless modem but the Internet Sharing app on the PocketPC (go to \Windows and copy the shortcut "internet sharing.lnk" to your \Windows\Start Menu\Programs directory and then you'll be able to start the app easily). It's much easier to use (well now that the DNS issue was figured out).
I'm still very curious why DNS isn't working for me with the default settings and it does for everyone else but I'm OK with this work-around for the time being.
erikk said:
I meant tracked in terms of tethered vs non-tethered (not being on a tethered plan; but then I tether about once a month when travelling in airports if that so I'm not worried about it). I know big brother is always watching (especially on AT&T):
http://abcnews.go.com/Politics/Story?id=3833172&page=1
Click to expand...
Click to collapse
Sorry for gettin us off topic with this,p but, yup^^^^), and glad ya got tethering working!
Alemaker
erikk said:
Yeah, it's already set to private. Still no DNS resolution. I'm going to try using a free public DNS server on the PC. Strange that the Tilt isn't passing thru DNS for me but it seems it is for everyone else.
Well using the free DNS servers (208.67.222.222 and 208.67.220.220) seems to work now and it even seems to resolve DNS faster. I feel better that I figured out how to get it to work but I'm definitely confused as to why it doesn't work by default like it does for everyone else.
Click to expand...
Click to collapse
This did the trick for me, thanks!
For those not fully aware of how to do this, connect your phone with ICS, go to network connections (control panel->network and sharing center->manage network connections), right click on the phone's connection (hover over them if you're not sure about which is which... mine said NDIS something or other), go to properties, click on TCP/IPv4, go to properties, and then give it the DNS addresses listed above.
Thanks!
-Taylor
I spent a good bit of the day today researching this issue, but i have run into a brick wall - please help me out if you have any ideas.
The issue is that i can't access my gmail account via messaging on my at&t tilt except via a WIFI connection. If my phone is hitting my local wireless router i can send/receive fine, if my phone is hitting 3G, Edge, or HSDPA i receive 'Error Synchronizing" - "Cannot connect with current connection settings".
So, i read as much as i could on this issue and found a few common suggestions - all of which i have tried with no avail.
1) When i click settings -> advanced -> select networks - both are now set to MEdia Net ("programs that.. connect to the internet" and "programs that.. connect to a private network")
2) I have unchecked "This network uses a proxy server to connect to the Internet" in my MEdia Net proxy settings
3) I have tried removeHiddenProxy4CWS_0522.cab and checked the registry setting as listed here to ensure that EnableAutoDetect is set to 1
4) I have set "network connection" under advanced in my gmail settings to both "The Internet" and "MEdia Net" with the same results
5) I do have pop3 enabled on my gmail account (it works fine on the phone when connecting via WIFI)
6) I have tried both via pop3 and imap settings for my gmail account setup
7) The connection being used is set to wap.cingular (not isp.cingular)
Please keep in mind that this gmail account works perfectly fine in messaging so long as i am connected to a local wireless router, it is only when going through AT&T's network that it does not work.
Is there any chance that AT&T has changed how they are forcing the use of their proxy? Am i wrong to assume i should be able to download my gmail through their network?
(p.s. thanks for any insight or help you might provide, i have managed to get my tilt flashed with dutty's latest release as well as my radio flashed, but i am having no luck with this issue)
note: during these issues with gmail, my live.com email was working successfully - you can always setup forwarding on your gmail account for a temporary solution
In your isp settings does it say "isp.cingular" or "wap.cingular". I had the same problem until i changed it to "wap.cingular". When it fails to connect it pops up a bubble window with a warning that it failed. Click settings, isp settings, next until you get to the setting that says isp.cingular. This is all granting that you're in the USA.
Problem confirmed for me as well. Cannot connect to gmail via the messaging app unless connected to wifi. I'm using MediaNet connection using wap.cingular when not connected to wifi.
emtcharlie said:
In your isp settings does it say "isp.cingular" or "wap.cingular". I had the same problem until i changed it to "wap.cingular". When it fails to connect it pops up a bubble window with a warning that it failed. Click settings, isp settings, next until you get to the setting that says isp.cingular. This is all granting that you're in the USA.
Click to expand...
Click to collapse
yes, mine is set to wap.cingular.. i switched everything to use the MEdia Net connection (not the My ISP one) - which was already set to wap.cingular.. thanks for the suggestion though, i left it out of my list - if anything this can be a consolidated spot for common causes.
FYI, it actually started working on its own since my initial post (after not having worked all day).. the only things i have done tonight are the following:
1) did a send/receive via a WIFI connection on the gmail account
2) setup outlook 2007 on my PC and synched my contacts/notes/email
3) upgraded my radio from default .11 to .17 (perhaps .11 radio restricts proxy settings?) (*soft reset - may have played a role?)
i wish i had tested it between each of these steps, but i wasn't really doing these things to try and fix the gmail issue.. hopefully it will stay working
Here's a silly question - had you tried simply soft-resetting the phone? I had the same problem for a bit, was absolutely driving me nuts, and all it took was a soft reset to get it to connect and work fine ever since. Maybe for future reference...
snooginsguy said:
Here's a silly question - had you tried simply soft-resetting the phone? I had the same problem for a bit, was absolutely driving me nuts, and all it took was a soft reset to get it to connect and work fine ever since. Maybe for future reference...
Click to expand...
Click to collapse
not a silly question.. i had tried resetting somewhere amongst my attempts during the day with no avail, but obviously i reset during flashing the radio rom, so who knows, maybe that did play a factor.
all i know is it is still working today from work, so that is a big plus.
Nick Collision said:
Problem confirmed for me as well. Cannot connect to gmail via the messaging app unless connected to wifi. I'm using MediaNet connection using wap.cingular when not connected to wifi.
Click to expand...
Click to collapse
try everything in the list, and try a soft reset as well.. if that doesn't do it you may want to try and update your radio rom to .17 since you are on .11 as i was..
I had the same problem and had to enable SSL for incoming and outgoing mail under the advanced settings in the Outgoing mail server setup page. Once I did that everything has worked perfect since then.
Hope it solves your problem aswell.
I've never had an issue with Gmail and wap.cingular...except HTML messages still not working.
The SSL thing is most likely it. If you read google's instructions for setting up the account it clearly states that ssl with authentication has to be enabled.
Gmail
For those having issues with Gmail, has anyone looked into Mobipush? This service allows you to use your device's Direct Push Technology to get your Gmail sent to your device in real-time. I had previously mentioned this in another thread. All you have to do is turn on POP or IMAP access in your Gmail settings and setup your device as per the instructions on Mobipush's site. I've been using the service and it seems to work great...and did I mention its free?
here's the link...
http://www.mobipush.com
I use Java for my Gmail account its very nice and fast with 3G. I have never tried setting it up on an account inthe built in Messaging App. I use Pocket MSN for my primary Hotmail account. Just download the Gmail IMAP software from Google and try it out and see what you think.
Kevin
i had the same problem with bellsouth as my email provider when using outlook email but i got it to work on xpressmail - i still dont know what was wrong...
Same problem, I think
Gmail app loads and maybe 1kb comes down but then after a short time it errors saying that it needs a data connection and to look at the FAQ. This only started happening after upgrading to ATT ROM AKU 0.4.4. Worked on my stock ATT TILT no problems.
mobiPush looks good. I use Seven's extended beta. http://community.seven.com/forum/main.php They now support Gmail IMAP. It works great, and I like how it fixes Gmail's imap problems. I'll have to check out mobiPush to compare the two.
Funny, I was able to get G-mail to work fine on my first Tilt and I got the new one (red light of death issue) and now my G-mail won't work...
vwauditech said:
I use Java for my Gmail account its very nice and fast with 3G. I have never tried setting it up on an account inthe built in Messaging App. I use Pocket MSN for my primary Hotmail account. Just download the Gmail IMAP software from Google and try it out and see what you think.
Kevin
Click to expand...
Click to collapse
Gmail IMAP software? Do you happen to have a link for that!
http://www.google.com/mobile/mail/index.html
smartyP said:
I spent a good bit of the day today researching this issue, but i have run into a brick wall - please help me out if you have any ideas.
The issue is that i can't access my gmail account via messaging on my at&t tilt except via a WIFI connection. If my phone is hitting my local wireless router i can send/receive fine, if my phone is hitting 3G, Edge, or HSDPA i receive 'Error Synchronizing" - "Cannot connect with current connection settings".
So, i read as much as i could on this issue and found a few common suggestions - all of which i have tried with no avail.
1) When i click settings -> advanced -> select networks - both are now set to MEdia Net ("programs that.. connect to the internet" and "programs that.. connect to a private network")
2) I have unchecked "This network uses a proxy server to connect to the Internet" in my MEdia Net proxy settings
3) I have tried removeHiddenProxy4CWS_0522.cab and checked the registry setting as listed here to ensure that EnableAutoDetect is set to 1
4) I have set "network connection" under advanced in my gmail settings to both "The Internet" and "MEdia Net" with the same results
5) I do have pop3 enabled on my gmail account (it works fine on the phone when connecting via WIFI)
6) I have tried both via pop3 and imap settings for my gmail account setup
7) The connection being used is set to wap.cingular (not isp.cingular)
Please keep in mind that this gmail account works perfectly fine in messaging so long as i am connected to a local wireless router, it is only when going through AT&T's network that it does not work.
Is there any chance that AT&T has changed how they are forcing the use of their proxy? Am i wrong to assume i should be able to download my gmail through their network?
(p.s. thanks for any insight or help you might provide, i have managed to get my tilt flashed with dutty's latest release as well as my radio flashed, but i am having no luck with this issue)
note: during these issues with gmail, my live.com email was working successfully - you can always setup forwarding on your gmail account for a temporary solution
Click to expand...
Click to collapse
I had same problem "Error Synchronizing" - "Cannot connect with current connection settings"." - Problem is activesync getting in a twist. Go into connection manager and turn off activesync, or connect to PC and then disconnect.
Wiggy
Tried setting up gmail in Messaging App
I tried to set up my gmail account too, just to see. I set up gmail pop3 at gmail settings. I went through messaging App and set up incoming with
pop.gmail.com:995 and outgoing smtp.gmail.com:465 Nothing seemed to work, says unable to connect with current settings. A few have already said that it worked fine under their messaging app. What settings are you using if you have it working? Please post your incoming and outgoing settings please.
Thanks, Kevin
I had this when I upgraded to Dutty's new rom, and I was panicking like mad. I tried everything - but nothing worked apart from wifi sync - so I went to bed. When I got up I tried to sync and worked right away...
So I dunno if you've been hard at work at this non stop - best thing to do is seemingly to let it settle, same thing happened for me when I upgraded again to V3 Dutty's (which is awesome by the way) - gmail started working after a little while (this time I did nothing)
Ok, so i searched the threads and haven't been able to find a solid answer for this. I installed BlackBerry Connect and it's running great, except for the fact that every time i try to use a program that utilizes data (web browsers, chat programs, etc.), I get booted off the BlackBerry EDGE data and it starts connecting to T-Mobile GPRS, hence killing my BB mail connection. Anyone have this same issue? How have you resolved it? Thanks in advance for the
help!!
- As you can tell, i'm using t-mobile with the bb add on plan....
Ok, so i'm trying to still figure this problem out, hopefully im on the right track. Looking thru the BBConnect settings i noticed that the BB Connect software is set up to run thru a different APN and username and password than normal BB devices. Normally, you would have a carrier specific log-in as the APN, username and password. On BB Connect, it's locked in to:
APN: blackberry.net
username: rim
password: password
You can see this by selecting the BB icon-> options-> details...
If you're familiar with using a BB device on TMO, you already know your settings would have been:
APN: wap.voicestream.com
username : (your phone number)
password: (your account password)
Does anyone know how to change this? I'm sure that if this can be changed, then we can use the BB data instead of switiching to the GPRS data everytime we open a data app. Any feedback? I havent seen a solution to this as of yet
well my kaiser is set to have both conections Blackberry and WAP.CINGULARGPRS on all the time and thats the only way they will bothi work at the same time. use kaiser tweak to set them both always on.
usmcnyc said:
Ok, so i'm trying to still figure this problem out, hopefully im on the right track. Looking thru the BBConnect settings i noticed that the BB Connect software is set up to run thru a different APN and username and password than normal BB devices. Normally, you would have a carrier specific log-in as the APN, username and password. On BB Connect, it's locked in to:
APN: blackberry.net
username: rim
password: password
You can see this by selecting the BB icon-> options-> details...
If you're familiar with using a BB device on TMO, you already know your settings would have been:
APN: wap.voicestream.com
username : (your phone number)
password: (your account password)
Does anyone know how to change this? I'm sure that if this can be changed, then we can use the BB data instead of switiching to the GPRS data everytime we open a data app. Any feedback? I havent seen a solution to this as of yet
Click to expand...
Click to collapse
There is no way to change this. BBConnect will reconnect after the other app using the other APN let's go. Although, on rare occasions, it doesn't reconnect and you have to Suspend and un-Suspend BBConnect manually to get it back again.
WonkotheSane said:
There is no way to change this. BBConnect will reconnect after the other app using the other APN let's go. Although, on rare occasions, it doesn't reconnect and you have to Suspend and un-Suspend BBConnect manually to get it back again.
Click to expand...
Click to collapse
this is incorrect like I just said above! first set up your kaiser to use your t-mobile network :reboot: then go to the connection settings and advanced>select networks>make sure both of these are set to your t-mobile.
then install BB-connect
reboot let it do its thing and set everything up.
then use kaiser tweak to set both connections to always on and reboot
no click the data icon on the top of the screen and make sure both networks are connected. the kaiser has the nuts to use to different networks at the same time even 3 if youhave wifi on. this might be an issue of t-mobile only being a edge network at this point but I can assure you it works just fine on 3G with at-t
OK, so i tried setting it up using both the T-Mobile data and bberry data at the same time. I used Kaiser Tweak, but it still won't let me have both the T-mobile data and bberry data connected at the same time. I did notice that i was able to get wifi and bberry data at the same time though. I wonder what's wrong with this
Is there perhaps a way to tweak this in the registry? I tried using kaiser tweak to keep both the bberry and tmobile data going at the same time but regardless, it kicks one or the other off
Perhaps this could be something included in the next version of KaiserTweak?
@Austinsync....
On a lot of the Stock ROM's the operator (AT&T/T-Mob) restrict this function of having multiple data/server connections.
@ usmcnyc
Thanks for your service! Now a bit of advice. Switch ROM's, after installing Hardspl of course. Many of the "Cooked roms" will allow this feature to be used. It costs the provider more to have multiple data lines going so they limit it to one. I recomend using Sleuth V3.0. I can surf the web, while using internet sharing, & still get my Blackberry Messages! If I'm in 3G or H territory, add using the phone to that list.