ICS Issue [not working anymore] - Tilt, TyTN II, MDA Vario III General

Hey,
i was using ICS on my Laptop the past 4 month. Everything worked pretty fine since yesterday. I used the USB cable and got a working LAN4-Connection with the ICS-Software. But instead of surfing, my firefox said: "Not found ...". Even ping didnt worked. "ipconfig" said i have a valid IP and all other connections were disabled. The device itself said "connected". HSDPA worked well on the device itself in Opera, but i wasnt able to get any data on my laptop. I disabled my firewall but it wasnt working. Im using windows xp ...
any ideas?
regards
MoDeM

no solution?

obviously its not an kaiser-problem because it works on my PC but not on my Notebook ...
any ideas?

It can be a lot of things. Start by checking the Kaiser's USB network IF IP address with internet sharing on and connected, and verify that no network card on the PC is using the same subnet. Also check that the PC is set to get IP address automatically on the "windows mobile internet sharing device" connection.

Internet sharing with Kaiser
I have the same problem with my laptop and Kaiser. When I try with the Diamond of my wife its working, but with the Kaiser, using now RomEos 4.6, he get connection but can not find anything.

Related

Connected to Wifi but cannot use Internet

Hi:
I have the HTC-branded TyTN II and I can connect to my Wifi network just fine, but none of the applications can access the Internet through this connection. The connection status shows as "connected" and the phone shows up in router's DHCP table. Does anyone have a solution?
Thanks in advance!
Try moving the WIFI power saving mode to the left: "Best Performance".
Don't know if this is "too obvious" but have you set the DNS lookup address?
oh man! another unlucky soul...like me
dont worry buddy, you are not alone in this "wireless problem" as i have an HTC Touch and unfortunately i have Windows Vista Home Premium installed in my laptop which has damn wifi.
same as yours, my HTC connects to the wifi i made in several ways with Security and Authentication Enabled in every way i can and also last with Open Authentication and Security as NONE
my network shows that my wifi is connected to my HTC but only LOCAL, which means you cant access internet, and strangely also, the wifi network is labelled as Unidentified Network, when the WIFI i made is given a solid name, like WIFY.
i checked out my HTC Touch with a friend who has Windows XP installed in his laptop and damn....i can browse as well as chat in Messenger, while being connected to his WIFI.
So i will tell you these by experience:
1st: its not a problem with your HTC TyTN II, so dont subject it to forced connection, like messing with your settings all day long while you try to connect it. cos simple truth is you cant (i m assuming you have windows vista as well)
2nd: its been like my third nite, with "vista+wireless connection+unidentified network" searched on google.
and somethings i came across, but didnt fix my problem includes:
> disable IPv6 from your NIC
> assign a MAC address filter to your NIC (Vista by default has Network Address set to Not Present, which can be found in your LAN Card > Properties > Advanced Tab)
And even my assumption that you're using Vista is wrong, let this be an INFO to other users here as well.
Damn, i m getting back to Windows XP!!!!!!!
So if you think your WiFi card needs a checkup or try these solutions i have mentioned, try google....its a saviour for all gadget dudes like us!!!!
Just to try and give a fuller picture - I have no such problems
I have a desktop running Win XP Pro, a laptop running Vista Home Premium and my Kaiser. All are connecting wirelessly thru a router using WPA encryption and using IE, Firefox for browsing, SMTP/POP3 clients for email and MSN. They are also connection to each other - desktop, laptop and Kaiser - no problem on any of them.
Yeah, having Vista on your network should be no issue with regards to connectivity of a device to a wi-fi network. However, having Vista on the network may make the vista computer invisible on the network map and make it unavailable on the network if you are using XP based computers as well. Not too sure about other Windows versions or different OSs. This is because the Link-Layer Topology Discovery (LLTD) Responder component is not installed on the Windows XP-based computer. The patch to install on the XP based rigs is here. I ran into several networks with this issue and have cleaned them up with this patch. I even keep it on my Cruzer because I have seen it so much.
I know this doesn't help with the original query, but I wanted to ensure ayyum3 and cv2k3 know that Vista in the network will not affect any outside device's connectivity.
To the 2 fellas who are having this issue... are you using a software, or have you enabled the locking out external devices from connecting to your network? Also, have you ensured your wireless router has proper internet connection? To see the network yet be unable to access the internet leads me to believe it is a router-modem connectivity issue (albeit a simple IP addy issue, or a cable issue).
What kind of wireless router you using? Is it using the latest firmware for it?
Are you able to connect other wireless devices to the said router?
Are you able to connect your TyTN to some other AP (ie neighbours, cafe, starbucks, etc)?
did you try setting your wifi power mode to best performance
This was happening to me recently after I replaced my router...I ended up changing the channel the wlan was using from Auto (it was setting itself at channel 6) to channel 11. Channel 1 also worked. The other thing I did was disable the wireless speed enhancement features on the router. Now I can connect and surf with no issues...
I dont know what all that was about a vista pc but the OP's problem (from last november) would no doubt be that he had not set the wifi connection to connect to "the internet" or his device was set to use a network proxy for all connections.

WM6.1 & Internet Sharing (on a Diamond)

This is probably a very specific issue that I'm experiencing but hopefully someone out there can help me.
I recently got an HTC Touch Diamond, running WM6.1. I use Internet Sharing on the phone and then connect it to my PC via a USB cable. I can then browse the web from my PC. If I now connect to my office VPN, it seems that the connection times out and / or is very slow. I can't even browse to other PC's on the network via the VPN connection as it times out. But I can ping the PC's so I know I'm definatly on the network.
Now I know what everyone is thinking... our VPN might be screwy. But if I use someone else in the office's phone (running WM6.0) I can connect and there is no problem whatsoever. The only difference is that he is on a different service provider than me (and of course a different phone).
I used to have a SE M600i before this phone and it worked perfectly on that (same service provider as now).
Has anyone experienced anything simular? Or have any ideas what I could check?
I've played around abit and found the following: When I take my SIM card and put it into another HTC running WM6.0 (can't remember the model) it works perfectly and I can browse our intranet sites over the VPN. So the problem is definatly limited to my phone.
I also used Internet Sharing on the other phone and then established the VPN connection from my laptop. I didn't change any of the settings so it is 100% the same on both phones as download from the service provider upon insertion of the SIM card.
On my phone when I'm connected to the VPN I can browse the network shares and download email, but as soon as I try and browse our intranet websites or try to connect to any database (using TOAD etc.) it doesn't seem to be able to retrieve data. Almost like the phone is not able to handle large amounts of data coming through... (i'm just guessing here)
Anyone know of any setting somewhere on the phone that could cause this to happen?
Finally got this working!!
I'm now using WMWiFiRouter to use my phone as a WiFi router and then connect to the internet from my pc. If I then connect to the VPN from my PC everything works fine.
I'm not sure if WMWiFiRouter implements Internet Connection Sharing differently than the normal ICS app on the phone, but it seems to work and it's pretty fast.
Can't believe it took two months - with absolutely no else seeming to have this issue - but I'm glad it's over now!!
hschutte said:
Can't believe it took two months - with absolutely no else seeming to have this issue - but I'm glad it's over now!!
Click to expand...
Click to collapse
i do. i cant even connect to the vpn, and using wmwifirouter the wifi button in comm manager is always switching to on.. even in flight mode !
so you're not alone in this one...

Using PC's internet on PPC

Hi,
I have Windows Vista and use Windows Mobile Device Center to connect to my TyTN II using USB. Can I use my PC's internet via USB on my PPC?
I was also thinking of turning my PC into WiFi access point so that my Kaiser could connect to it using Wifi
Any ideas
Thanks
As long as you are connected through activesync (sorry WMDC) you can use your PC's internet on your phone. As for your second question you should just get a wireless router if you want wi fi for your kaiser.
Thanks for the quick response.
<insertwittyusernamehere> said:
As long as you are connected through activesync (sorry WMDC) you can use your PC's internet on your phone.
Click to expand...
Click to collapse
But that never seems to work ... it used to work with activesync on Windows XP on my home PC but not on my laptop with Windows Vista.
<insertwittyusernamehere> said:
As for your second question you should just get a wireless router if you want wi fi for your kaiser.
Click to expand...
Click to collapse
Hmmmm... I have been using Wifi on Kaiser without a problem. I was just thinking if I could use my Laptop as access point so that my Kaiser could connect to it over wireless connection... Or any other idea for internet connection sharing (of PC for PPC).
Yasir
anyone? ...
You want to keep your laptop on to use it as a Wifi AP for your kaiser?? Might as well use your laptop already and not ruin your eyes.
Haha... yeah right... actually I was a bit unclear in my statment.. let me try to put it a little differently..
laptop uses internet via LAN cable... I want to share that internet with Kaiser over Wireless ... is it possible... (now that's more of a PC related question that Kaiser, so I have a Kaiser related question too)..
I can't use internet via WMDC on Vista ... what could be the possible reason?
yana209 said:
laptop uses internet via LAN cable... I want to share that internet with Kaiser over Wireless ... is it possible... (now that's more of a PC related question that Kaiser, so I have a Kaiser related question too)..
Click to expand...
Click to collapse
Yes, but for that you need to have your laptop powered on... his point was that if your laptop is on you might as well use the net on it rather than on the obviously much less comfortable phone.
I never tried it, but could be possible by making a ad-hoc wireless network on your laptop, and making your laptop a gateway.
There are settings hidden away that need ticking for sharing the internet connection of the PC, although I thought they defaulted to "on". I'm not sure, I haven't touched a vista machine in months!
Ad-hoc wifi would be the way to go, but good luck getting it working; it's a royal pain in the arse half the time, and for the rest it works like magic. Depends on the devices.
If you're browsing on your phone I hope you've got a copy of Opera Mini; using wifi my phone can nearly outpace my PC at browsing the net.
CrArc said:
There are settings hidden away that need ticking for sharing the internet connection of the PC, although I thought they defaulted to "on". I'm not sure, I haven't touched a vista machine in months!
Ad-hoc wifi would be the way to go, but good luck getting it working; it's a royal pain in the arse half the time, and for the rest it works like magic. Depends on the devices.
If you're browsing on your phone I hope you've got a copy of Opera Mini; using wifi my phone can nearly outpace my PC at browsing the net.
Click to expand...
Click to collapse
Open wmdc
choose mobile device settings >> Connection settings
Set: " this computer is connected to" to either "automatic" or "the internet"
That should do it.
Hi...
It's already set to "automatic" and changing to "internet" didn't work either..
thanks for the suggestion on wifi adhoc..i'll try to find more about it...
Hi,
I was wondering if it is posible to share the Pcs internet with the Kaiser with a Bluetooth set up?

wmwifirouter help

Hey so I installed this software and am trying to get tethering running before I get on that wifi-less train tomorrow back home.
It seems to "work" as in it creates the 3G to wifi connection via ad-hoc access point which my macbook can connect to fine - but I cannot access the internet from the laptop.
I tried 3G to usb and it just sits at "waiting for connection". I have synced up my Fuze to the macbook via usb via missing sync so I know the usb connection does "work".
I had it point to both medianet and a new gprs connection I created pointing to nothing (no user/pass/etc) and it connects to both but nada on the macbook end.
I should add I did delete the Forcecellconnection reg entry.
Any ideas?
thx
bpm2000 said:
Hey so I installed this software and am trying to get tethering running before I get on that wifi-less train tomorrow back home.
It seems to "work" as in it creates the 3G to wifi connection via ad-hoc access point which my macbook can connect to fine - but I cannot access the internet from the laptop.
I tried 3G to usb and it just sits at "waiting for connection". I have synced up my Fuze to the macbook via usb via missing sync so I know the usb connection does "work".
I had it point to both medianet and a new gprs connection I created pointing to nothing (no user/pass/etc) and it connects to both but nada on the macbook end.
I should add I did delete the Forcecellconnection reg entry.
Any ideas?
thx
Click to expand...
Click to collapse
The reason for this is because AT&T has coded a registry key that only allows the ISP.CINGULAR apn do teathering. I am using another ROM so that has been removed but the registry key that you should remove to enable this is:
HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings\ForceCellConnection
just make sure to reboot the phone once you delete the key.
as stated above, the registry key was removed before the problems.
bpm2000 said:
as stated above, the registry key was removed before the problems.
Click to expand...
Click to collapse
Sorry, I should have read the complete post before. I have not been able to teather to my mac but i have read that it works with bluetooth although I havent tried it yet.
I've been struggling with it as well and I had the impression that the software doesnt behave properly as a DHCP server. Meaning your laptop is not getting an IP address from your phone.
I also note that after you install this program it uses a fixed IP address for the wireless lan card, which results in not being able to access any other wireless access point when you're done using wmwifirouter. So I gave up and am waiting for a newer version where this might work all a bit more intuitive.
wmwifirouter works perfectly with my macbook/ipod. Did you keep all the default settings? (i did)
yes i did - didnt work.
I loaded up vista on boot camp and i can get internet sharing to work there.. weird.
I am going to try a few custom ROMs and see if that helps at all - will report back.
thx!
welli tried notatreofanand da-gs roms and they both work in vista but still no go for leopard...
i cant figure out why it connects via usb fine in windows but osx doesnt ever want to connect with this or internet sharig?
i know the phone can sync n connect via usb since The Missing Sync can connect and even transfer files and such.
any other ideas?

Activesync and WIFIrouter! Need solutions

Hi folks, just got my diamond almost a week ago and I already filled it up with applications, absolutely love it's wide area of functions. I came across a great idea that i could use at work: to connect the phone through activesync(that will give me internet on the phone from the computer) and then to use wifirouter app to further share this internet connection. But I couldn't get this working, because wifirouter accesses my gsm/3g internet on the phone instead of the internet obtained from the computer through activesync. Anyone got an idea how to get this working?
when u connect your phone with usb u can choose : shared internet connection. maybe then it will works dnoo
I don't think you understood, I need internet forwarding from pc to phone firstly, which I managed to do already with activesync, but I also want wifirouter application to recognize the internet being sent from the pc through activesync and not connect to edge/3g.
I think u need to setup your wifi router again this time dont set it to gprs/3g select usb to wifi. That shld work it
The wifirouter application doesnt give me any options, it just initializes and thats it.
can anyone help?
Using the USB to Wifi mode should work in this instance. That is if you're using one of the paid versions as I'm not sure if the free version supported this.

Categories

Resources