Bluetooth And Wifi Problem!! - Touch Diamond, MDA Compact IV General

hi there i have had my diamond for about a month and now i cant turn on either my bluetooth or wi-fi.
when i click on the bluetooth on in comms manager it just has that annoying windows wheel and never turns on, and the same applies when i go through the main menu and wi-fi. this is very annoying as it did work beforehand and i am not happy.
p.s. when i search for new devices, it comes up with error message 'problem with bluetooth hardware'
any ideas?

Comms error...
You have a problem with your bluetooth hardware! That cannot be fixed by anybody here... return your device and get it repaired under warranty... that's assuming you haven't flashed it with a dodgy ROM!!

all i've done is put the manila theme on it to make the touchflo3d theme black instead of that t-mobile pink

Related

Replacing WiFi hardware in the Blue Angel

Which parts of the BA need replacing to repair my WiFi problem?
My plan is to use the BA dissasembling procedure, and replace parts needed.
I have printed the parts list, and can see that a lot of the minor parts of the BA have some kind of WLAN purpose. Is there a separate board that has all functions of WLAN on it?
I presume if there is only one board it will be expensive?
Moving this to another forum.......... maybe they will know.........
description of problem?
WiFi has always worked for me, until I installed WM5. It would not turn on.
I installed windows mobile 2003SE, anmd when I turn on WiFi the yellow light flashes, indicating it is on, however windows mobile doesn't display the wifi icon, or search for networks. The "eggtimer" icon comes up for a few seconds, and I am then taken back to the today screen.
I can't believe it is a hardware problem, as the light is flashing.
I have now reverted back to WM5
Any ideas?
Thanks,
Tom
hardingt0110 said:
WiFi has always worked for me, until I installed WM5. It would not turn on.
I installed windows mobile 2003SE, anmd when I turn on WiFi the yellow light flashes, indicating it is on, however windows mobile doesn't display the wifi icon, or search for networks. The "eggtimer" icon comes up for a few seconds, and I am then taken back to the today screen.
I can't believe it is a hardware problem, as the light is flashing.
I have now reverted back to WM5
Any ideas?
Thanks,
Tom
Click to expand...
Click to collapse
Exactly same problem is with me
Any possible solution?
Nope, no one has any ideas.......
Success, I have solved my problem! I don't know what I did, but WiFi can now be turned on and off via the comm manager!
If I leave it on when I reset, it stays working after!
Only prob I have is that it won't work with Kasuei Hitchiker.
Yeah bit of a pain!
Yes I've found the issue quite annoying , there was a rom I tried which was out which noted that the wifi would not activate except through Comm Manager but , Helmi's latest upgrade seems to have corrected the issue which merely is a setting change,now more oft than not wifi turns on very good rom .

Bluetooth problem

My friend got a HTC P4350 which worked ok on the original WM5 rom.
Now I updated the ROM to the official HTC wm6 last week and until yesterday no real problems.
Now since yesterday Bluetooth won't work. Enabling bluetooth through the comm manager doesn't work. Also enabling it through the settings/bluetooth option doesn't work either. The bluetooth stays off and the option goes back to unselected. Also no blue light flashing on the device.
Last night I tried to hard-reset the device
And still no go
Searching for bluetooth devices takes very long and eventually gives out an error saying: hardware problem with the bluetooth
I think it's beyond software and fixable, gonna return it thursday.
Any other ideas ?

TomTom Sound Issue

Question -- I have TomTom on my Tilt ... it installs fine, and works fine ... however each time I start it up the sound is turned off .. .and I have to touch the screen, turn on the sound twice before the change in settings "sticks" and I get the voice giving me directions.
Any thoughts how I can fix this?
Mine does the exact same thing, otherwise it works perfectly. Running XDA Live 1.1 ROM...
That is the default function. You must always activate the sound after starting.
GSLEON3 said:
That is the default function. You must always activate the sound after starting.
Click to expand...
Click to collapse
hate to tell you guys, but it's not the default. The sound is on when I fire up Tom Tom on my Tilt, I've never had any issue nor had to go into settings to turn it on before. Are you guys using a ROM other then the original one?
Default off on both my HK Kaiser & my AT&T Tilt. Don't know what to tell you.
Solution that works for me!
I have found that all I have to do is to rotate the volume wheel on the side of my Tilt and the sound gets turned on without having to go through the preferences menu. It will repeat the last direction when you do this but it doesn't bother me too much and it lets me know that the sound is enabled.
The same issues occur with the previous version 6.03
And on other PPCs as well (eg IPAQ hw6910).
But it does not happen always, so I deduce it's related to conflicts with other softwares.
And it certainly isn't a feature, as a previous poster suggested.
TT as a default always starts with sound ON.
weinson said:
Question -- I have TomTom on my Tilt ... it installs fine, and works fine ... however each time I start it up the sound is turned off .. .and I have to touch the screen, turn on the sound twice before the change in settings "sticks" and I get the voice giving me directions.
Any thoughts how I can fix this?
Click to expand...
Click to collapse
I didn't have this problem until about 30 minutes ago, I received the Carcomm Cradle I ordered for the car, installed it, tried out TomTom and now I have the same problem as you.
Are any of you using a Carcomm Cradle?
The only other thing I changed before the sound problem is I bought a "Veripart 3-in-1 Converter HTC ExtUSB" so I can charge the PDA and listen to music using the 3,5 mm jack port.
I also have exactly the same problem, and solve it with the volume wheel. I also had this problem on my Hermes.
TomTom 'fixes'
FWIW, not sure why, but the volume wheel never solves my problem in a predictable fashion, so I've went and found the following apps that make things easier:
TomTom Menu Builder -- Change the location of where the 'Turn on sound' or any button shows up in the menu for faster access. e.g., I've placed my 'Turn on sound' button on page 1 with 'Navigate to' and 'exit application'. The menu also allows you to enable all sorts of 'hidden' menus, with the most useful being the voice preferences menu, which lets you choose how verbose the speaker is. Alternatively, if you're not up to installing the menu builder, you could download my TomTom menu (see attached). Either way, place TomTom.mnu in \TomTom\SdkRegistry.
TomTom Starter -- Make your phone volume max and turn off all notification popups before starting TomTom. Reverses volume and notification changes after exiting TomTom. Great for when you forget that your phone is on vibrate or at a low sound setting.
BTW, its not the ROM that is the problem, it most likely has to do with TomTom. I'm using 6.03, non-taster edition.
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
michi123 said:
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
Click to expand...
Click to collapse
Thanks michi123, I seem to recall reading about this in another thread. However, that's still yet another application (comm manager) and button I need to press before starting TomTom.
It's much easier for me to use the two applications I've included, as I'll need to go into the menu anyway to enter my navigation point and should I forget to turn off vibrate or crank up my volume, TomTomStarter fixes that for me...
michi123 said:
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
Click to expand...
Click to collapse
Hey your right, I turned, the data connection off and it's Ok now.
Thanks...
michi123 said:
The sound will be muted when you start TomTom with a data connection active. If you disconnect your data connection (G, 3G or H) before starting TomTom the sound should be on.....
Click to expand...
Click to collapse
Excellent! That works. And unless you have changed the functionality of your end button (like in the xda ROM) it is pretty quick to hold down the red end button (to close all data connections) before opening TomTom.
But it's not very effective when you're using a converged device, right?
I mean, would you turn off your phone every time you'd want to load TT, and then have to remember to turn it back on (while still inside TT)?
wisniak said:
I mean, would you turn off your phone every time you'd want to load TT, and then have to remember to turn it back on (while still inside TT)?
Click to expand...
Click to collapse
All holding down the end key does is cancel all active data connections .. it does not "turn off" the phone (unless you happen to be on a call). So yes, if you want to tun TT when you are on the phone, this solution will not work, but if you want to run TT when you are not actively speaking, holding down the end key first solves the sound problem. Then, you can still make and receive calls and, for that matter, you can still use data programs too, all with TT running.
Very useful thread, I've just updated mine and my G/Fs TyTns, we both have exactly the same ROM and RADIO, hers starts with Volume on, Mine starts with Volume off, the only real difference is that we're on different service providers, we both have MS ActiveSync running against our different corporate Exchange servers, and I have reduced my connectivity to GPRS to save battery. Will give the Tweaker app a go and see what happens. Sh
Alex. What version of tomtom are you running. I cannot get the menu file to work with my version 6.032(8351) no taster version.
Hi guys,
I just wanted to post on here cos I noticed some information that I didn’t agree with and also I have tested what others have said and it works so I thought I would say thankyou in one breath and bugger in another.
I have tested TomTom 6.031 SDK version on a HTC TyTN2, Glofiish, HP614c, HTC p3300 and a HTC Cruise and all of them start TomTom with the sound muted if they have a data connection active!
Sound is not muted at start-up if there is no data connection. This is great to know as I was baffled by it all but it also causes me a pain in that I need the data connection all the time, so I think its a mistake if TomTom themselves presume otherwise.
I have a XDA Orbit 2 on order but I am guessing it will be the same with that. I dont remember this issue with Windows Mobile 5, but it happens for sure on 6.
Also I have an issue with the 6.031 SDK and the unmute function call doesn’t appear to work!
Ho hum... so many devices with the same issue....
Ram
I have to admit I made a slight error in my statement above, I hadn’t tried it on the HTC p3300 and got the same result, it would appear that the HTC p3300 is the only device out of the many I have tried that doesn’t switch to silent when loading TomTom while a data connection is active.
I am trying to work out why this is as I am running the same software installation on all the devices.

Major!! Wifi Will Not Turn On!!

I've tried it all!! The wifi will not turn on at all. In the settings tab and under connection, the comm manager wifi switch pressed will cause the wait cursor to come up, but after the process it wont turn to on. Can anyone please help me.
how do u know its not on? cant detect wifi?
Is the Wifi antenna icon comes up on the top menu ?
Baronic said:
how do u know its not on? cant detect wifi?
Click to expand...
Click to collapse
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Please somebody help us. My diamond's wi-fi doesn't work. I try a lot of tfink. I try a lot of time hard reset. And several times upgrade diffrent roms. Now i use 1.37.401 europa rom. But my diamond's wi-fi still not work.
same here.. any news?...
Juggy said:
same here.. any news?...
Click to expand...
Click to collapse
Did you set your battery for best performance in the wifi configuration? If not, try it and see if it works then
Yes.. the wifi is not working ,... the same for the gps...
Mines the same. Done a soft reset - nothing. Done a hard reset and all seems fine for the mo.
Got my phone from orange.
hard reset u mean erase all and start like new?
with this hard reset.. the same problem... any other option??
No Wify
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
WLAN Hardware
minlu said:
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
Click to expand...
Click to collapse
I have the same problem with german htc touch diamond and several roms.
I think the hardware has an error. Bull**** !!!
Has anyone an other idea?
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
I couldn't enable Wifi properly on my last phone despite hard and soft resets. After trying lots of times, I gave up and sent the phone back to Orange. I currently have a Diamond Touch that has no problems enabling, but can't connect to my router using WPA2.
I think I have the solution for wifi / wlan problems on diamond
Over one week i try to start my wifi (100 hardresets, 5 new ROMs) and then i believe it is an hardware error.
Under ...\connection\wifi\ was not the tab "wireless", only the tab "networkcards"
My last try was the solution:
1. In my HTC Kaiser is the same wifi-hardware
2. I export the registrykey "HKEY_LOCAL_MACHINE\Comm\TNETW12511" from the kaiser to a .reg-file
3. I delete this registrykey on the diamond and import the .reg-file from the kaiser
4. Before I can start wifi i make about 5 softresets and try to start
5. But the start was only successful when I make first a connection to the pc with ActiveSync and then a softreset
This is my solution, please answer me when it works for you too
One problem is still there: after an usb connection wifi will not turn on. I must make a softreset but thats no problem for me.
Its the same what "huwwatkins" describe at #13 with the S710
Here is my regfile from kaiser
zmob123 said:
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Click to expand...
Click to collapse
I have heard of this... The wifi does not go on but the bluetooth does. I was told it was a bad chip.
same here, called retailer today. told me HTC is working on a fix. will be available in about two weeks. let ya know
Same problem here..
I have the same problem. Tried everything - no luck. Thinking of turning it in for repair - should I flash the original SPL/ROM for warranty reasons or can they tell it's been flashed anyway ?
wifi working fine on mine
i have no problems at all
huwwatkins said:
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
Click to expand...
Click to collapse
Yes my diamond has this also only when plugged with USB.
Grtzzz

Bluetooth Send Problem

Hi People, I've been away from PDA's for while, realized the error of my ways and picked-up o2 Stellar at the weekend, the 2nd one in week. Before doing anything I installed WIN 6.1,everything appeared to working fine, until I tried to transfer files from my N95 to the stellar via bluetooth, every time I tried I got the same error 'unable to connect, I can pair with any phone tried 4 different phones today and I can send from my phone to another but can't receive files. I have double checked all my settings they seem to OK so I'm at a loss. Before I take it back for a 3rd has anyone else here had the same problem or know what I'm doing wrong.
Any help and advice would be much appreciated.
ROM details as follows
ROM Version 3.29.206.0.WWE
05/09/08
Radio Verson 25.83.40.02W
BlueTooth Verson 2.0/2.0+EDR
Windows Mobile 6.1 Pro.
plaver said:
Hi People, I've been away from PDA's for while, realized the error of my ways and picked-up o2 Stellar at the weekend, the 2nd one in week. Before doing anything I installed WIN 6.1,everything appeared to working fine, until I tried to transfer files from my N95 to the stellar via bluetooth, every time I tried I got the same error 'unable to connect, I can pair with any phone tried 4 different phones today and I can send from my phone to another but can't receive files. I have double checked all my settings they seem to OK so I'm at a loss. Before I take it back for a 3rd has anyone else here had the same problem or know what I'm doing wrong.
Any help and advice would be much appreciated.
ROM details as follows
ROM Version 3.29.206.0.WWE
05/09/08
Radio Verson 25.83.40.02W
BlueTooth Verson 2.0/2.0+EDR
Windows Mobile 6.1 Pro.
Click to expand...
Click to collapse
I had a similar problem with a bluetooth dongle.
Start/Settings/Connections/Beam/Recieve all incoming beams. Make sure BT filesharing is turned on the phone (if you fileshare), also make visible. BT can be spotty sometimes and these settings can be reset to default if the phone is reset.
nufsaid said:
I had a similar problem with a bluetooth dongle.
Start/Settings/Connections/Beam/Recieve all incoming beams. Make sure BT filesharing is turned on the phone (if you fileshare), also make visible. BT can be spotty sometimes and these settings can be reset to default if the phone is reset.
Click to expand...
Click to collapse
I forgot the setting 'Receive all incoming beams' now that has been set, everything is OK. Thanks
Had the same problem. Set to visible, receive all incoming beams etc. but I could only send, not receive. I solved the problem by activating Bluetooth Explorer and Activate File sharing. Strange since I didn't have this problem with WM 6.0 and BT Explorer deactivated.

Categories

Resources