Hi all,
I have been using this phone for a while now. Its been working very well till today. Today I tried to install some themes and they ended up occupying my full phone memory. So I did some googling and decided to do a hart reset as I didnt have any valuable software installed.
I went ahead with the Hard reset by clicking 'clear storage' and typing 1234
The phone rebooted and got my memory back and everything except that it not connecting to a network. any network.
I use the 2G version of Touch Diamond in India (GSM). It keeps saying cannot register to network. I've tried different networks with SIM cards which are working well with other mobiles and both manual and automatic network selections.
My stats are
ROM : 1.93.720.2 WWE
Radio : 1.20.OliNex.
What should I be doing.
Flash a new radio see if that sorts ur problem
Thanks Mate,
I'll try that.
Still looking for solutions.
Related
Hello,
My T-Mobile MDA Vario spoke Dutch which was very unformortable so I unlocked it and installed the Qtek ROM. Installation was fine.
However, it kept on being confused about the state of the "flight mode"; either I could make phone calls even though the icon said it was not connected to the network (aerial with X) or it did not want to connect to GPRS even though it was on the T-Mobile network
Otherwise it all worked fine.
In an attempt to get rid of this annoying behaviour I installed the K-Jam ROM found on the FTP server of this website. Installation was fine again, however now the device soft resets itself all the time and does not always want to turn on when I push the button on top. The soft reset frequency is very unpredictable, and turning phone on or off does not really make a difference.
Any clue?
Many thanks in advance
Manhattan.
It looks like the reset problem is solved after installing an updated i-mate ROM that resides in the upload section of this site's FTP. It seems to me it has only an updated extended rom part, perhaps someone has figured out what's the difference?
thanks
manhattan
what's the filename? i couldn't find it...
K-JAM_WWE_1010903_106_10110_ship.exe
Hey everyone ..
i was using my Blueangel normaly and so happy with it until i faced this problem before 2 days ..
I was texting my gf while i was out and kept on even though the battry gave me a warrny that its really low .. i ignored and kept SMS's her until it went off.
i went home charged my device but its not connecting to the network. it shows either "No Service" (where it shows X beside the signal tower) or "Searching" (where it shows ! beside the signal tower).
Please anyone knows how to turn it on im really in a bad situation here.
Note: just to let you know im using WM5 Hemi's rom and upgraded it today to Xplode's rom just hoping it would help.
Well when i tried another sim on my blueangel it worked and my sim card on another mobile it worked also. im really losing my brain
44 views no one have a slight idea..
anyways thanks alot everyone for visiting
Hi,
All I can suggest is to re-install radio rom! prob 1.15.
If not that then ensure flight mode is NOT active, and battery's fully charged
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
It seems wierd that another sim worked on your BA, must be a faulty/damaged sim.
I also note you've tried the non-working sim on another phone and that works! Wierd that too!
Hope that helps,
Sunny
Have you tried to manually select the network in the "Phone" settings screen? I've heard of similiar problems being fixed by that.
well after i asked here and there and got disappointed with I-Mate people.. they know nothing at all
an IT in my company told me the problem is with my sim card. its damaged cause of the change in the battry power (as he says) it damaged the frequency that my mobile use to read the sim so there for it would work on any mobile except mine.
so i would change the sim but it needs me ages to get free and do that.
THANKS ALOT TO EVERYONE ATLEAST READ MY THREAD OR TRIED TO HELP
YOU GUYS HERE ARE THE BEST
By the way
sunny: the Radio is already 1.15 from ages. but thanks alot for trying to help me.
Fraser: I tried to manualy select the network but it says there is no network which is funny cause there is 4 networks in my area.. actuly im working with the same operator so im inside the tower LOL. the signal streth is the best here.
Thanks alot mates
No problem!
Thats what we're here for!
Regards
Same problem
I once had the same problem. Now I'm no genius when it comes to these phones and it actually took me a whole week to get an idea of what the hell happened to my phone. Basically, these phones are Quad Band (GSM 850/900/1800/1900) and for some reason after I upgraded I lost my signal. I found a little application that let me reselect my band (its not built into windows for some reason) and that solved my problem. I just selected "Auto select" and the problem was solved after a soft reset.
Now, I can not remember what that application was but maybe that can give you an idea of what to search for.
No Service issue
sunnyd24 said:
Hi,
.......
Also when you reset BA, on first screen does the R show a none?
If so reset, twice, its a common problem with BA and WM5, it isn't able to intialise the radio rom before WM5 boots.
...........
Hope that helps,
Sunny
Click to expand...
Click to collapse
Hi, is there more 'democratic' way to resolve this issue than reseting BA twice?
After installation of xplode's R4 for noobs an old version of R 1.06 was left on BA. Thinking that this was a reason for No Service of the phone I dumped latest R , but double f..reseting necessity still persists ...
Is that a normal thing to reset twice such an advanced device when you want even just to call smbdy? Thanks
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
xplode said:
there is a lil bug in my roms, after totally draining both bateries when you power it on it says NONE for radio you have to soft reset it again in order to work. I have never had a band selection problem but it is possible reason for this
Click to expand...
Click to collapse
Hi hi there! First of all please accept my deepest appreciation for such a great work you have done to make us - PPC ordinary users - little bit more happy Just one small note - is it possible to upgrade your downlodable R4 file with all necessary ROMs - Radio, etc., etc. With the intention that every Noob trying to upgrade his/her BA, should do it in a push of one button - not searching for separate latest ROMs and HowTo instructions? Thanks for your time!
P.s. Sorry it seems came out little bit off topic....
well it is possible but i have no time to do it. or you can try to copy the radio nbf file into the folder of the nk.nbf and run the upgrade utility
Any solution on this matter ? I am using Helmi MW6 ROM with radio 1.15.00 and i'm having the same problem.
I've searched the forum but found no solution yet.
JP
Hello
Today my diamond just shows the "G"-symbol and nothing I do can get the 3G symbol back. I tried my simcard in a N95 and there it works fine.
I updated the radio rom to 1.00.25.05 but nothing.
Anything I can check myself or is it going to the shop?
I have Tele2 Sweden and as i said the card works fine in a Nokia N95.
/Magnus
Bluetooth problems
Probably related to you 3G problem, I had problems with Bluetooth which stopped working. After a hardware reset it worked again, so it definitely was a software problem.
See my blogpost here.
Magnus
--
My HTC Touch Diamond Experience on
http://diamondstouch.blogspot.com/
I had a similar problem, after flashing some of the roms. Apparently not all ROMs have the conenction setup as a part of the initial customization.
So i had to run the Connection Setup (Start/Settings/Connections tab) in order for the Diamond to configure my network settings correctly after which i started to get 3G back again. Can't say for sure if that was a reason, let me know if it works.
Hello
I tried them all. After a hardreset I still get Gprs only and trying a Telia card only showed Edge.
I Think its the radio unit thats f.u.
Thanks for the replies!
Last night i was playing with my gps ( Navigon - Google Maps - Google Nav) I switch the phone off at the comm Manager and left it off like that the whole night.
This morning when i switched it on, the phone refused to receive any signal.
Ive tried the following
Soft Reset
Hard Reset
Different Sims
Switching flight mode on and off aswell as the phone tabs
Ive changed the band from auto to gsm and back and still nothing
Gps, Wifi and everything else still works perfectly.
Before i return it and wait like 50 days for them to fix it, what can i try?
stevh0 said:
Last night i was playing with my gps ( Navigon - Google Maps - Google Nav) I switch the phone off at the comm Manager and left it off like that the whole night.
This morning when i switched it on, the phone refused to receive any signal.
Ive tried the following
Soft Reset
Hard Reset
Different Sims
Switching flight mode on and off aswell as the phone tabs
Ive changed the band from auto to gsm and back and still nothing
Gps, Wifi and everything else still works perfectly.
Before i return it and wait like 50 days for them to fix it, what can i try?
Click to expand...
Click to collapse
More information please. Rom, Radio, SPL?
Also have you tried calling your provider to ask if theres any problems at their end?
Mark.
I have no idea what rom..
lemme check..i have not changed a thing since i took delivery of the phone about 9 11 month ago.
my sim works perfectly in another phone.
rom 1.56.405.5
rom date 08.28.07
radio version 1.27.12.32
Does your sim work perfectly in another phone *in the same location* though? It was suggested you contact your network provider to see if they have any known issues or there are any reasons why your phone shouldn't be working. It may help if you have the IMEI number ready if you are in the UK, in case there is some reason why it has been blacklisted. If your TyTN II wont work with another sim in it (ideally from another network provider) and your usual network provider is unaware of any reason why this should be happening, then as a stock standard TyTN II, I think you'll have a good chance of having it looked at for free under warranty by HTC. Here in the UK I had my ROM reflashed from their WM 6.1 abomination back to the original WM 6.0 version by HTCs repair centre within one day so unless you choose a turtleback express postage option to send it in, there's no way it should take 50 days.
It started working all on its own again? how weird is that?
it had been normal ?
my tytnII had became the same after flight mode had turned on.
when fight mode off, it displayed "no service".
yiwangwuqian020 said:
my tytnII had became the same after flight mode had turned on.
when fight mode off, it displayed "no service".
Click to expand...
Click to collapse
you just use GSM-schen-HTC.Kaiser.CommManager.3G
hi, first thanks a lot,
my tytnII had this commManager software. I just used this commManager to turn on or off this flight mode .
how about no sim detected?
This problem is on my phone ,but this prog is not running perfectly. Error report at cca 95% full "sufficient system permissions"
Sorry for little English!
Please help me
radio:1.65.17.56
rom: through
Gastrocsaba said:
This problem is on my phone ,but this prog is not running perfectly. Error report at cca 95% full "sufficient system permissions"
Sorry for little English!
Please help me
radio:1.65.17.56
rom: through
Click to expand...
Click to collapse
after I reflash this tytn`s rom, it remain no service.
I think it had wrong with its gsm hardware.
Sorry for my english.
I found this problem too.( no service)
My solution is
1. I format rom by use MTTY tool.
(1. How to check and repair bad block
a). Please make sure that you are SuperCID and you understand the importance of hard spl as this maybe a dangerious operation for you.
b). Download Mtty.exe file in the attachment below and save it to your computer.
c). Open connection setting of your activesync or WMDC on your PC and disable "Allow USB connection".
d). Put your divice into Bootloader mode and connect to your PC via USB
e). Run Mtty.exe from your PC
f). Selec "USB" in port box and then click OK
g). Press Enter once or twice to let the screen dispay "USB>" or "CMD>"
h). Type "info 8" to check if your device has bad blocks. And if there are any,
i). Type "task 2a" to fix the bad blocks.
2. Flash Rom again.
3. Now Signal come.
And you turned your Kaiser into a BRICK...
... If your SPL supports "task 2a".
I am in Michigan and I have an AT&T Tilt flashed with the TPC Elite ROM (V10)from a year ago, with radio 1.70.19.09. It's been working quite well. However, I was tweaking some settings, did a soft reset, and now the phone displays "Phone Off." I have determined that the SIM card is not being read. I swapped SIM cards with another phone, with the same result, and my SIM card works in that phone.
I have been happy with the phone and want to keep it. Is this a likely to be a hardware problem rather than a software issue?
Any help would be appreciated.
what kind of tweaking...registry? . Have you already check your comm manager to see if your phone radio is on right?
If you still with that problem you should perform a hard reset.
Tweaking was through Advanced Configuration in the settings-system menu. Yes, I checked the comm manager. I believe the problem is that SIM cards are no longer being read or sensed; I tried another one that worked, but no luck. The radio would not come on, and the IMEI number was not read on that card, either. I tried using a piece of paper wedged between the SIM card and the metal guide for more pressure against the contacts...no luck. I also tried repositioning the 8 contacts for better connection. No luck there, either.
Any other ideas?
I finally tried the last resort, hard reset, which I was avoiding since I customized a lot of stuff, but it worked. Now I get to play around again.
good to know that you solve your problem