Hi
My Orange SPV M700 was successfully unlocked and radio upgraded and hard spl installed as per trinityguides.info with original Orange WM5. However I am now trying to upgrade the ROM to lastest dopod WM6, but cannot get past the bootloader using both usb cable or SD card methods. With usb the bootloader recognises the USB but activesync says there is no phone connected. If I softreset out of bootloader into the orange WM5 OS activesync connects OK.
I then tried the SD card method of renaming the .nbh file but it won't boot and just comes up with the bootloader screen. I've hard/soft reset the phone with no difference. It looks like I'm stuck with the factory WM5 orange ROM until I can resolve this issue as I've tried 2 PCs with XP and Vista and have now run out of ideas.
Although the phone works fine it appears there is some fault either with the hardspl bootloader or some or something introduced when it was unlocked/ radio ugraded?
Anyone got any ideas?
Help!!!
Possibly too late and possibly already tried, but when it is connected to your PC and in bootloader, the tri-colour screen, try running the upgrade again. Ignore what Active Sync says as at this point there is no PPC fror it to connect to.
I would also try one of the other ROMs, i tried the DOPOD ones and failed to get them to load, everything else i tried from here worked just fine.
Related
Hi there,
never thought this could happen to me [/irony]
I wanted to flash my G4 Wizard (IPL/SPL 3.08) to the last official ROM of T-Mobile Germany (AKU 3.3)
The flash process got stucked at 99% for hours and now my phone only boots to the three-colored bootloader.
No problem I thought, flash again. I plugged the cable and I saw "USB" on the display (there never is "serial" on the display, if this is for interest)
But now: no flashtool would find the phone.
Sometimes when it's found (seldom), it says that's not the right utility. I tried a RUU..._noID.exe I found here but this only got "no Connection"
I tried flashing from Vista, XP and 2000 SP4.
Please help me.
Did you do the HardSPL? If you did, when you tried to put the official ROM from T-Mobile, it tried to put the IPL/SPL from G3 on your phone, since the HardSPL makes your phone a fake G3 (something like that). You have to remove the IPL/SPL info from the official ROM's otherwise you get stuck.
There's hope tho, since you can get to bootloader. You can try the miniSD flashing method, meaning, there's no connection to the computer
See here how: http://forum.xda-developers.com/showthread.php?t=276963&highlight=minisd+flash
Thank you very very much!
it worked!
Glad I could help
Hey guys,
I have two WINgs and I Hard SPLed one already and I Flash it regularly
the other one was at the T-mobile Rom and stable till it starting restarting at every call.
So i treid to Unlock it also like the other one
So I backed up all my contacts and Messeges with PimBackup
and after i Installed the three files
security removal, Aserg and cannonyang
when I try to Hard SPL through RUU with USB so it tells me no connection although its connected in Activsync
I searched the forums and Bypassed the Connection issue by entering the Boot loader through the phone and it got to 2 percent and told me i need a newer RUU although it is the Same as the other Wing for the versions and I have done the other one Fine
when I tried to do it again and still bypassed into the boot loader through the phone it now tells me that There is no Connection to the device. Although the USB sign is available in the bottom.
Now I have Also searched the forums and found Aserg suggesting that we install the Native T-mobile Rom
It connected fine and went into
1% of updating Image and then it gave me a communication Error
Now I noticed two things:
1. it Goes into Bootloader and CHills there
2. It Changed the IPL number from 4.26.0000 to 4.10.0000
but SPL remained 4.26.0002
Does any one have a Solution for this Problem Guys?
Is it bricked now and I just can't see it?
Please help because all my contacts are are on it and i am working with crappy nokia instead of it that has none of them.
you can import your contacts from PIM backup onto your other device if it has PIM also, you know that right?
Now some questions
Did you install the cabs that papamopps said to?
Can you still flash the RUU? It seems you have the newer Wing SPL but the older IPL.
HELP PLEASE!!
Ok so i think i bricked my wizard!
I have the t-mobile MDA wm5 unlocked g3.
I've flashed it to the WM6 Rom and everything had been working well, except there was no MMS feature on the phone at all which sucked! . My girlfriend thought it would be better if she did the "windows mobile update" icon feature that was on the phone to speed up the phone....She downloaded the updates & my phone shut off!! When it rebooted everything seemed normal...
1st.
T-mobile screen
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 10.1.0.811
-Then i get the green windows mobile splash screen, but after i get an error message!!
*Device Authentication*
“Device authentication failure. Please contact the product manufacturer. For reference, please provide your device ID.
3563820017905901 38000050bf3f5173”
Ive tried to boot in safe mode to try & flash my phone again but for sum reason my computer wont recognize my phone is plugged in! What do i need to do?!? Please help, any help is thankful!
is not a bricked wizard men
easy men easy... but please tell to your girl dont push everything that she dont nderstands... Everybody knows that upgrade official is only for original OS like windows XP or VISTA..
Firs of all
Put your Wizard on bootloaders mode... plug in via usb the PC Active sync wont recognize your phone.. then run the original shipped Stock ROM and then your Coocked rom...
But if the PC at the same time you place your Device on Bootloaders and plug it via USB... shows a pop up message that said Windows cant recognize your device or unknown device or something... Restart your Pc... Hard reset your PDA... and replug your Device as I said it before... if not check your USB cable maybe a broken cable failure...
IF NOT?????!!!!!!!! then Use another PC with XP!!!!!
If it still on his not reconized message you are in serious problem but your girfriend Too...
Good luck
Easy..."Device Authentication failure" is caused by your ROM. Just flashing another custom ROM and the message should go away.
I'm surprised that the chef that made your WM6 rom left the Windows Update feature in there, it was bound to crash a cooked rom, since the update service never worked properly anyway.
I'm sure flashing another rom will resolve this.
yeah, flash the rom (you might want to try WizFlo 20273 v6.1.1.3 - i'm on it, and loving it). heck, you can even do a hard reset and that would probably resolve it.
Hello,
so my T-Mobile MDA III (german) = HTC Blue Angel ist not working any more. I tried to apply the latest update form T-Mobile but it failed.
Now I am stuck in the bootloader. It says: "Serial" above and "v2. 08" below. When I insert it into the cradle "Serial" changes to "USB".
I cannot hard or softreset the phone. It stays in the bootloader. When I connect the MDA III to Windows 2000 or Windows XP it is not recognized anymore by the device manager. In windows 2000 no driver is being installed and under windows XP (with SP3) "unknown device" is being installed. No chance to manually change to any other driver. Also tried new windows installation.
Tried with Active Sync 3.7 (original from t-mobile), 4.2 and 4.5.
Flash via SD Card is not possible, if I understood the posts correct. Further mtty does not detect anything at the usb port. BaUpgradeUt.exe and MaUpgradeUt_noID.exe fail.
Any help greatly appreciated.
Fixed mine....
Exactly the same problem with mine Thought I had blown it up. Left it for 5 mins then connected my USB(still no activesync connection and no lights or nuthin) but selected the MaUpgradeUt_noID.exe again and it just worked.
Hope yours works too.
No it doesn't help.
Hi! I know that it was long time ago, but how did you manage to solve the boot-loader problem?
I didn't.
Same problem with 2.06
Restart
It really helps. Restart and try again:good:
Had the same problem right now.
Reflashed MultilangROM - didn't help.
Reflashed Radio ROM - all's fine now
Hello guys
last week my Tytn II decide to also get stuck at the bootscreen. It had been running more than a year with one of Dutty's ROMs without any problems at all. Fortunately I knew this forum so I didn't really panic but started reading possible solutions to the problem.
Flashing new OS or SPL via USB didn't work. Nor was I able to connect via mtty to give the boot command. I finally got it back working by flashing KAISDIAG.NBH and after that flashing RUU-356-patch-nostuckinSPL-FORCEUSB as KAISIMG.NBH both via the SD method. After that I have downloaded and flashed the latest standard HTC rom & radio. The device boots and can make calls.
However whenever it is connected to a pc it just freezes. Or at least becomes so slow there's nothing that can be done with it. Activesync connection cannot be established. Note, this does not happen if the device is connected to my car charger or to another USB charger, but only when connected to a PC, XP or vista, doesn't matter.
I've tried flashing different boot loaders, OSes & radios, so far no luck. Currently OS = 3.34.721.2 WWE & Radio i= 1.65.24.36.
Booting & making calls works, connecting via activsync doesn't.
I'd appreciate it if anyone could give me some tips as to what could be the cause of this problem.