i downloaded the 1.6 version of duttys rom and the hardspl from the first post and flashed the hardspl fine
i then put the blacimg.nbh onto my memory card and put it into the tricolour mode.
it started flashing after i pressed the power button but it gets to 85% ish and then just stops and crashes
when i reset the device it says upgrade rom code error, please try again on the tricolor screen
ive done a hard reset and tried again and i get the same error. im just in the process of downloading the 1.5 and im going to try that.
has anyone else had the same problem?
ive tried searching but there doesnt seem to be anyone else that has the problem
yus
Related
when i upgraded my xda2 from wm2003 to wm6 it was working fine but i didn't have 30.53 free storage so i use ather90 Hima DOC Partitioner and i did get 30.53 storage memory but after few minutes while i was installing some 3rd party softwares the device got stuck i tried to hard reset it but it wont give displaymad: backlight wont open only shows imate on black screen)and when i tried to upgrade my rom i got this error "DOC VERSION IS ERROR" in Bootloader mode
anyone having this error pls tell us about it and how to solve this error
sorry for being a complete noob....
hmm werid, which bootloader version do you have?
try do a hard reset by pressing Camera+Record button and reset
the version of bootloader is 1.06 and i have tried many times to hard reset it but when i select no yes yes nothing happens the screen go completely black and windows does not start and heres the best part when i remove battery for a day
and then upgrade new rom the device works fine until it gets hang and after hang when i try to soft reset or hard reset the device nothing happens the os wont start what so ever i try to do.I think i have done something wrong with DIsk on chip formating for getting 30.56 free storage and i did get 30.56 free storage with a "doc version is error"
try to reverse the process hopefully that should do it, or i'll consult buzzlightyear
yes i have revesed the whole process by upgrading to wm6.1 sade and then i reversed the whole process by running ather90 Hima DOC Partitioner and have done everything exactly so i again got 14.60 factory default storage but the device again got stuck after some hours of use and when i again soft,hard reset it nothing happens now i have to again upgrade the rom and wait for the windows to load so that i can again comeback to wm2003 (the most weired thing is why device is not affected by hard reset means nothing happens when i do a hard rest after the device stuck)
one more thing i can only see 14.60 storage in start>>settings>>system>>memory but i don't get access to 14.60 storage means i cannot see its root or path in file manager.
ok here i am posting a screen shot of its missing from file manager.
now almost a month i've been trying to get my D810 live again. i know there are many similar problem, but still don't get idea how i can make it work again.
could someone point me another way to recover my problem?
right now my D810 is stuck at tricolor mode. i can't flash Hard-SPL from computer, always fails, when progress is about to begin suddenly, it's restarted. i did continue the process with recovery but the result is same, could not update.
i have also try miniSD way. i've copy ROM into it and change name to TRINIMG.nbh, it's ask for 'Press power button to update', when i press the button. the process is begin. at some percentage it got stuck again. the error message was:
"Update Terminated
UPDATE FAIL"
also have try to copy HardSPL nbh to pda. using this nbh, still ask for 'Press power button to update', when i press the button, process is begin, and success. But later i restart the phone, result is not good, this time is stuck at White screen with the HTC logo
that my problem, thanks. any suggestion are welcome and great thanks for it
btw at first i use Olipro 1.30 and update at latest radio and use FInixNOver, i did make a successfull Update, but later it got hang at bootloader, so i get reflash with olipro 1.1. got run again. but later got stuck again. for short. i've also try HardSSPL_ZakMcRofl, ROM team Cv93, Marry
success to bring alive
that one thing that i have not try and i just try this now, using splxploit
http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=68
follow the instructions, and bring me, not stuck in tricolor mode instead stuck in white mode. so i enter bootloader using special key. upgrade rom using romutility from computer, but at this step i got stuck again in progress (just 1% progress is pass). hmm then i try to update ROM via SD
and woaaah, it works. i got bring my D810 to alive again
thanks for all tools in here. it's all great tools
btw i think that in my mind, i still can't revert my HardSSPL, i want to revert to olipro 1.1, right now i use olipro 1.2. i have trying to reflash but it won't work.
Hey, that's another problem, another story. For now i just leave as it is and enjoying for several time. i really miss my D810. Someday i will try again to revert/change hardsspl
thanks all
johnyq said:
that one thing that i have not try and i just try this now, using splxploit
http://trinityguides.info/index.php?option=com_content&task=view&id=22&Itemid=68
follow the instructions, and bring me, not stuck in tricolor mode instead stuck in white mode. so i enter bootloader using special key. upgrade rom using romutility from computer, but at this step i got stuck again in progress (just 1% progress is pass). hmm then i try to update ROM via SD
and woaaah, it works. i got bring my D810 to alive again
thanks for all tools in here. it's all great tools
btw i think that in my mind, i still can't revert my HardSSPL, i want to revert to olipro 1.1, right now i use olipro 1.2. i have trying to reflash but it won't work.
Hey, that's another problem, another story. For now i just leave as it is and enjoying for several time. i really miss my D810. Someday i will try again to revert/change hardsspl
thanks all
Click to expand...
Click to collapse
Why don't you flash back to original rom....than install spl and follow by yor selected rom.
Mine P3600i was down for quite sometime.................I used splxploit ...works.
my phone is hard spled. things went fine after hard spl, i was able to flash 2 roms, the last one was juststablev2. after one day my phone started to freeze, random crashes, finishing with a "white screen" and then resets. and after a couple of crashes the phone coulnt even load windows anymore, after the splash screen it continiued to reset. and now, the phone dosnt gets on anymore, it only goes to bootloader (not when you turn on the phone, it cant be turned on, only pressing cam button and resetting turns the phone on and you can only be in bootlader. ) i tried everything, readed almost everything in xdadevelopers, tried to flash with shipped roms, tried to flash with custom roms, tried to flash from pc, to flash from sd card (and yes i know everything to do becouse i did my earlier flashed with sd card, all went without any problem). it just looks the phone is dead, but can enter into bootloader. do anyone have any idea ? ill be realy very thankfull if someone can think something about my problem.
ps : my SPL is 4.70.yang
You can't flash your carrier ROM from bootloader mode via USB?
No, i can not. i forgot to mention that every rom install attempt is turning back with the error 244 : invalid model id.. Just one time, i did get a message, when i was trying flash with the juststablev2, it gave me an error about certificate. but not the same sd card, same rom, gives me nothing, just goes to bootloader mode after checking the sd card.
same problem with me(bendede aynı sorun war osman kardes:/))
help help help
Ahem...okay il give alot of details to try to make it clear and easy for you guys so i can get some help
i have xPeria X1 running Hard-Spl 0.72 Olinex
i Flashed my Phone last night and i fell asleep before the update finished...i assume it did but the battery ran out on it, without me taking it out and like reset the phone ( Complete the process )
so this morning when i woke up i tried turning on my phone and it wasnt working..i charged it a little and i got the 3 color screen ..so i reflashed quickly..(didnt think about it...and )with the USB plugged in ...and it failed at like 6% something around that
Every single time i try to flash with the MicroSd
it stop after a few secs and i get some numbers (0018003) with an Error message saying Update terminate update Failed
i tried to flash it with the computer it get stuck at 6% and says it lost connection with the device.
i have a Sandisk Card...ive been flashing Here And there without problem before
its formatted Fat32 and everything i tried other Roms still failing at 6% everytime
Exa777 said:
Ahem...okay il give alot of details to try to make it clear and easy for you guys so i can get some help
i have xPeria X1 running Hard-Spl 0.72 Olinex
i Flashed my Phone last night and i fell asleep before the update finished...i assume it did but the battery ran out on it, without me taking it out and like reset the phone ( Complete the process )
so this morning when i woke up i tried turning on my phone and it wasnt working..i charged it a little and i got the 3 color screen ..so i reflashed quickly..(didnt think about it...and )with the USB plugged in ...and it failed at like 6% something around that
Every single time i try to flash with the MicroSd
it stop after a few secs and i get some numbers (0018003) with an Error message saying Update terminate update Failed
i tried to flash it with the computer it get stuck at 6% and says it lost connection with the device.
i have a Sandisk Card...ive been flashing Here And there without problem before
its formatted Fat32 and everything i tried other Roms still failing at 6% everytime
Click to expand...
Click to collapse
Try to reflash the rom you was flashing in the first place.
Mayb it is locked, cause it needs a serten file from that rom.
Have you tried to hard reset it?
Fully charged it
And try to enter the bootloader to flash again?
ted presley said:
Have you tried to hard reset it?
Fully charged it
And try to enter the bootloader to flash again?
Click to expand...
Click to collapse
yes i did and no sucess
@xMoo
i did that a few times and it didnt work still anyways
what im thinking is that i screwed up something in the Read Only Memory of my phone..else it should allow me to flash to stock at very least...
and also i flashed back to Stock SPL and now i cant Flash it back to Hard SPL
i get a Error message saying Lost comunication with the phone bla bla with a tutorial to reput the phone into boot loader mode
Exa777 said:
yes i did and no sucess
@xMoo
i did that a few times and it didnt work still anyways
what im thinking is that i screwed up something in the Read Only Memory of my phone..else it should allow me to flash to stock at very least...
and also i flashed back to Stock SPL and now i cant Flash it back to Hard SPL
i get a Error message saying Lost comunication with the phone bla bla with a tutorial to reput the phone into boot loader mode
Click to expand...
Click to collapse
try agent47´s task29 that might help
Im trying atm...so far its been 10mins and its stucked at 0%....i cant flash anything =(
Edit... it Gave me update Error 262
are you able to enter the bootloader/tricolour screen ? if so remove sd card.
now on your PC use "X1_RUU_ROM_UpdateUtility" with any ROM image (remember to rename rom img to ruu_signed.nbh), follow steps on ROMUpdateUtility, you will be asked to connect phone (bootloader screen) on 2nd step.
I hope it helps
I Hope this help you!
In one occasion I suffered a similar problem and the issue was that the Memory Card was damaged, and when the Phone Start and tried to read this it "stuck" reading this.
Try to start the phone without the memory to see if this work.
Regards.
Musse_1 said:
are you able to enter the bootloader/tricolour screen ? if so remove sd card.
now on your PC use "X1_RUU_ROM_UpdateUtility" with any ROM image (remember to rename rom img to ruu_signed.nbh), follow steps on ROMUpdateUtility, you will be asked to connect phone (bootloader screen) on 2nd step.
I hope it helps
Click to expand...
Click to collapse
Actually My phone only boot in bootloader mode.
Any any any utility that flashes my phones memory fails
SE update utility= failed stop at 15% and wait forever
Hardspl / Custom RUU... =failed get error 262
Microsd =get stucked OS fail update terminate update failed
so i have no OS now , stucked on Stock SPL and no clues..on what to do next
@ Above poster : i tried flashing with and without my microSD in..it still didnt work i will try a few more times when i get home tonight
Exa777 said:
Actually My phone only boot in bootloader mode.
Any any any utility that flashes my phones memory fails
SE update utility= failed stop at 15% and wait forever
Hardspl / Custom RUU... =failed get error 262
Microsd =get stucked OS fail update terminate update failed
so i have no OS now , stucked on Stock SPL and no clues..on what to do next
@ Above poster : i tried flashing with and without my microSD in..it still didnt work i will try a few more times when i get home tonight
Click to expand...
Click to collapse
I've had it.... here is the list of everything i've tried
Mtty /Task 14 0 , Task 28 55aa , task 8
Flashing SD Method
Flashing Stock Rom /Sd Method
Flashing Another Stock rom /SD method
Flashing HardSPl back and for from stock to olinex 72
Using Seus Updater
Take out battery out of the phone for 24h+ to (reset it)
Used Task 29...with no sucess...
Flashing using Cuu Firmware or whatever its called....failed
Every single time i try to flash it goes wrong ... for stock roms it stop at the OS part
Anyways Seus updater put me on spl78..but fails when it comes to the OS @(15%) Like
I just need to Fail Flash one of the Stock rom to go back to spl 0.72
my question is is there any hacked/cooked rom wich include HardSPL like the stock roms does?...that would like flash my bootloader?
Any other suggestion would be greatly appreciated...i dont wanna throw my Xperia Away..when it still can boot in bootloader...i refuse to believe X1's Bricks that easily (ONLY 1 BAD FLASH )
Phones current situation: has no OS, Cant charge it , it turns on itself whenever the USB is plugged in
HardSpl wont flash whatever what i try...so im stucked on Stock SPL eitheir 72 or 78 ..that i can still choose
Phones MicroSD methods keep saying OS fail , (0018003)
Likewise with stock Roms
Mtty...didn't do ****!!!! yet it i got the log like if went trough alot and ****....
lolSEUS Updater get stuck at 15% after updating the bootloader.
Help?
So..i finally got mtty working. I don't really know how but i got it working despite the code 10 error while installing.But i decided to install the rom thorugh custom RUU after the task 29 format. So i did everything the mtty tutorial said but now, i can't flash the custom ruu.Whenever I try, it gives me 240 error. I cannot access my internal storage, activesync will not recognize my phone. I cannot boot into anything it gets blocked at the Touch Diamond screen. Did a hard reset..nothing worked. Please help me with a solution! i just want to flash a rom onto it so i can use it. Momentarily I can't do nothing with it...
EDIT : GOT IT! I had to reinstall the official rom back. after that everything back to normal.