i think i must have missed a step out, porbably a big one when trying to go from dutty 2.6 to miri winmo 6.5...
the screen gets stuck now, i took the sd card out and held down vol down and turned it on.. them colours come up and it says:
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
Upgrade ROM Code error
Please try again
i have faith, i plugged in the usb and it has recognised it on the phone..
i looked in another thread where someone bricked their phone but they had spl 1.14..
HEEEEEELP!!!!!!
install USPL2.5 on your PC. There is one with easy GUI. install it on your HD and then you can update your rom. Same thing happened to me.....
http://forum.xda-developers.com/showthread.php?p=3703459
thanks im trying to get this to work..
i have windows xp, i cant seem to install the driver.. i install the framework though.. :/
if anyone can help me, ive reverted back to my crappy old phone for now..
Make sure your phone is in bootloader mode showing USB and you turn off USB connection option in your Active Sync program. Otherwise it wont work.
had the same problem...
Put a working ("old") BLACIMG.nbh file on the root folder of your Memory card. hard reset with it (power + vol down, etc)
The latest Miri need a 1.54 HSPL. But to upgrade, the HSPL, it seems you need a working ROM so you can connect to ActiveSync (XP)/ WMDC (Vista, 7) and upgrade the HSDP. HSPL posts is sticked on this forum, I think. Or you could find it in the wiki..
Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Before I flashed my first rom, I read wiki.xda-developers.com to make sure I understood what I was doing, and used the search button, instead of risking turning my phone into a paper weight.
Since then, Crackwhore has written a very helpful post at the top of this forum about how to use HSPL and USPL to allow you to flash roms.
yeah i know all that. not my first time flashing a phone but the first time it got stuck loading the bootloader. and specially when i´ve only used the HTC update.
darfor said:
Im about to flash my ROM from original 1.56 to Duttys new, but when i enter bootloader the white loadingscreen gets stuck in my face. Nothing happens and i need to remove the battery to shut down device. Anyone? Freakin frustratin´.
Click to expand...
Click to collapse
you mean you couldn't get to boot loader page?
So you already have HSPL 1.56 installed (or have SPL1.54 and used USPL)?
If you have HSPL you could try renaming the .nbh file to blacimg.nbh and copying it to the SD card and entering bootloader
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
AFW said:
Same problem here. Stuck in bootloader mode. Loading progress indicator never moves beyond 0%. Have always used the card method (blacimg.nbh), but this time it doesn't work and nothing flashes. No matter what I do the system goes to tricolour bootloader screen and says ROM update error. Have tried 3 microSD cards, all in working order, so this isn't the problem. The full problem description is here. Help!
Click to expand...
Click to collapse
try dnloading the rom again amd try.
the file might be corrupt
Have tried that many times. File is not corrupt. I'm getting really worried this is now a brick...
OK, if you can get phone into bootloader, it is not bricked
What does your SPL say in bootloader? Do you get any errors when trying to flash rom? Are you using USPL or HSPL? If USPL, you have to use it before every flash to new rom or radio. If HSPL, are you using correct version?
Was on Dutty's 3.9 XT, but decided to revert to standard WWE 1.56. I flashed the Std 1.56 ROM successfuly, and then tried to restore the ship SPL 1.54 using the card flash method. This failed, and now I'm stuck on the bootlader screen forever.
No matter what I do the THD always goes to bootloader (red-green-blue-white screen), with following text:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error
Please try again
USB
Click to expand...
Click to collapse
When I start blac_uspl.exe (USPL 2.5), a window flashes (Vista64) for a split second and then nothing else happens. The Vista64 system's USBs work with THD and have been used to sync over past few months.
When I try to run HSPLWrapper_Blackstone_156OliNex.exe and step through the preliminary screens, the Verify that you want to update ROM version screen has the From Image Version as blank and the To Image Version as 1.56.Olinex. When I click to commit the flash the THD screen switches to white with a progress indicator that always stays at 0% until it times out. Recovery does nothing and the same thing always happens. Using Vista64. .Net installed and fine. I can't use the card method (BLACIMG.NBH) - the system also stays on "Loading .... 0%" and nothing else happens.
When I try to flash anything (have tried HSPL1.56, Dutty's 3.9 ROM, stock 1.54 spl) using the card method, the system says "Loading . . ." and hangs there forever without a progress indicator showing.
Your SPL says 1.54.0000. When you try and run USPL.exe have you remembered to disable your antivirus?
Have you tried usb method instead of card for flashing rom?
I know you have said that youi have used usb for syncing, but when in bootloader does it change from 'serial' to 'usb' when you connect HD to PC?
Fallen Spartan - I want to thank you for taking the time to help me resolve this problem. Very much appreciated!
1. Yes, anti-virus disabled and indeed removed from the PC.
2. Yes, have tried the USB method at least 20 times.
3. Yes, the bootloader changes from Serial to USB. It then goes to the progress indicator screen and hangs on 0%. The progress indicator on the RUU on PC also stays at 0% and eventually times out. I've gone through the Recovery routine at least 20 times, with no luck.
When I try to run SSPL-Manual-TouchHD.exe it says "not a valid Win32 application".
I'm a bit perplexed by this.
You have obviously successfully flashed Duttys V3.9 so drivers are fine, you know how to use USPL, both flashing methods (SD card and usb/pc), disabled anti-virus, phone in bootloader.
Have you tried to reflash 1.56 rom or possibly performing a hard reset before trying to use USPL or HSPL. I doubt this would make a difference though.
Have you tried cRaCKwHoRe's USPL GUI v 2.5 Application?
You don't get any code errors?? I'm struggling to find a solution here.
Yes, this is most vexing. I've flashed innumerable times before and never had an issue. I suspect the SPL is fine, but somehow the actual WM ROM image is corrupted. Will now try to load Std 1.56 ROM image again...
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa (though I'm a rugby fan).
AFW said:
Success! The 3rd attempt at reflashing stock 1.56 ROM worked. I don't know why the system bombed out before. Perhaps one of those inexplicable brain farts..
Anyway, all seems to be fine now. Fallen Spartan, you have my endless gratitude for at least responding. Let me know if you need accommodation at next year's FIFA World Cup in South Africa.
Click to expand...
Click to collapse
No accomodation required, just glad you got it sorted
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
can anybody help me at all
Adamsville: perhaps you're stuck in bootloader mode because the WM ROM image flashed on your system has become corrupted or disabled, ie the only thing the system can boot into is the bootloader.
Try flashing a new compatible WM ROM image and see if that works.
AdamsvillE said:
Im still stuck. When i installed HSPLWrapper_Blackstone_156OliNex my screen changed colors but would go back to normal when i would turn the screen off and back on so i didnt see it as a problem. I installed the EnergyROM BLACKSTONE 20090608 Standard an tried to go back stock using RUU_BlackStone_HTC_WWE_1.14.405.0_Radio_52.49a.25.26_1.09.25.14_Ship but it gets to 1% then says this update utility cannot be used for you PDA phone. Please check your update utlity.
Then the phone boots up and at the black smart mobility screen in the bottom corner it says
R 1.09.25.14
G 52.49A.25.26U
D 1.14. 21010
the phone boots up with the funny colors again and goes to align screen but it keeps staying there even after i align it.
The bootloader screen says
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
USB
Am i tryin to install the wrong stock ROM. I purchased the HD from phonesource-usa if that helps also
Click to expand...
Click to collapse
a hardreset followed by a 1.54 base rom will solve all ur probs.
or lower spl to 1.14 cos ur stock rom is a 1.14 base as suggested by th name..
cheers
Does anyone know how can the HardSPL be installed through internal memory because my usb port doesn't work at all at data transfer mode, only for charging and handsfree. I have the HTC diamond from vodafone. I have tried many ways but nothing works. Also I have tried many hardspls but nothing. I don't know if I am doing anything wrong through the process. Can someone post the procedure from flashing it through internal memory ?
I also tried copying and executing the SSPL-Manual.exe from the internal memory (I have also copied the RUU_signed.nbh renamed into diamimg.nbh) but nothing happened the phone switched off and I had black screen. The file I used is Unsigned-Hard-SPL-Diamond-OliNex.zip downloaded from the Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!! thread.
My phone has the following information when enetering bootloader mode:
DIAM100 64
SPL-1.97.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Also the phone is flashed through internal memory with the latest official rom provided by the vodafone uk website
this phone got brick due to updating of a rom without hspl
and now this is happening to the phone when trying to do anything
It is just going in and out of the bootloader.
The message in the red part is " TOPA*** 32M
SPL-1.33.01 iNex
MicroP-Topaz (LED) v10
TURBO HW/TURBO SW
The message that is in the green part is "NO TP MFG DATA. UPGRADE ROM CODE ERROR"
i tried to search but to no avail...this is for my friends phone
All is hope not lost....
I got something similar recently.
Have you got the right SPL version?
SPL-1.33.01 iNex is for as 6.1 rom, I believe you need 1.83 later for 6.5 roms.
I connected phone to pc, re-flashed the corresponding spl and rom, and everything worked.
If it wont connect to pc, try the method of flashing rom using SD card as stated in thread...
http://forum.xda-developers.com/showthread.php?t=520312
AntonyWatson said:
I got something similar recently.
Have you got the right SPL version?
SPL-1.33.01 iNex is for as 6.1 rom, I believe you need 1.83 later for 6.5 roms.
I connected phone to pc, re-flashed the corresponding spl and rom, and everything worked.
If it wont connect to pc, try the method of flashing rom using SD card as stated in thread...
http://forum.xda-developers.com/showthread.php?t=520312
Click to expand...
Click to collapse
thanx will try and let you know how it goes
upgrading HSPL will solve the issue, search and read harder next time.
hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets
RVerverda said:
hello,
i just got a kaiser and i wanted android on it. accidentaly(yes i know) i flashed it to nand. my real problem is: i have incubus26Jcs superfroyo rls15, but i have no sound.
i tried flashing the radio, but with the radio's i tried it says error 262:update error.
i tried flashing back to WM with SD, but it's stuck at the loading... screen.
i tried mtty but it doesn't make a connection.
i tried going back to wm through usb but it stops at 0% with wrong vendor id(i have a dutch kaiser from orange, which has gone bankrupt, and found no stock rom), it also stops at non-stocked roms with update error.
i have read: http://forum.xda-developers.com/showthread.php?t=423486
http://forum.xda-developers.com/showthread.php?t=420683
http://forum.xda-developers.com/showthread.php?t=533976
http://forum.xda-developers.com/showthread.php?t=903478
and lots and lots more.
i also can't get HardSPL onto my kaiser, as it still stops on the loading screen(with the SD card).
does anyone have a solution for me? or can i only have a silent(only vibrating) kaiser with android?
useful information:
tri color screen:
kais130
spl-1.56.0000
cpld-8
radio's tried:
1.70.18.02, 1.71.09.01.
WM stock roms tried:
RUU_Kaiser_HTC_NLD_3.29.404.0_radio_sign_25.83.40.02_1.65.17.56_Ship
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
KaiserCustomRUU.exe
other tried:
kaiserdiagtest1.zip
kaisercustomruuv1.zip
mtty v1.42
kaisdiagsd.zip
please help
greets
Click to expand...
Click to collapse
You must SPL, do you have? 3.29 at least
you must have a radio newer than 1.70.X (use 1.70.18.02), didn't you read the thread "how to replace windows mobile with android" ?
If you can't update radio through the SD, use KaiserCustomRUU.exe: put it on a file wherever you want and put the radio you want also on the file and name it "RUU_signed.nbh". It's all on the threads man!
here's the SPL thread...http://forum.xda-developers.com/showthread.php?t=498320 USE THE SEARCH MAN!
no sound is because of no radio updated...