can anyone give me an explanation on how to remove the radio-rom from an original rom. can this be done using duttys nbh tool? (that one was working on the hermes)
i tried using nbhtool. that resulted in a "invalid model id" error during the update proccess. can someone give me the the correct id? (i tried KOVS110)
Related
I've tried to upgrade my XDA 2s using PDA2k WWE 14000 176 11 CDL. I bought mine in Singapore. And using it in Indonesia.
First I just run the BaUpgradeUt and it says Device ID error. Then edit the RUU.conf. Run it again and still get Device ID error.
Second, I tried Using MaUpgradeUt_noID and it worked fine for the Radio but not for ROM and ExtROM. Then I put Radio.nbf and MS.nbf into different folder leaving only nk.nbf, EnterBL, RUU.conf, RUU.dll, GetDeviceData, MaUpgradeUt_noID in the upgrade folder. I try to run di MaUpgradeUt_noID and it stop when the progress bar reach 41%. It says ERROR 112: CE ROM UPDATE ERROR. Same thing with ExtROM.
Plz guys I need help.....
Also my bootloader is 2.07. Sorry I forgot to write it.
Any help would be appreciated guys......need urgent help here..plz
Read wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Use the first method.
TheLastOne said:
Read wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Use the first method.
Click to expand...
Click to collapse
still not working. I cannot use GetDeviceId coz it's only stuck in bootloader 2.07. Could you give me another way to revive this dead xda2s.
thx b4.
Flash it with the First Method (Quick/Easy) as this does not need the info out of devicedata.
Hi adbradwell,
Since you bought your device from Singapore, why don't you use the official Asia Upgrade to 1.40, since it is out. Get the shipped full exe from here. At least you can be certain you would not get any device / country error. Just my two cents worth tho. Cheers ^^
Btw, if you are stuck in bootloader mode, just perform a hard/soft reset to get out of it.
Hi, I want to make a flashable radio rom 2.47.11 from this thread: http://forum.xda-developers.com/showthread.php?t=268031&page=10 This rom is locked, so I cannot install it on my cid-locked wizard. I've extracted 96000000-GSM_0.nb and now I'm trying to make nk.nbf, but I don't know how. Can I use this settings? And if the radio rom upgrade will fail, can reflash it?
Nobody knows how can I make it?
Patience, Jimmy.
There is no IPL/SPL in the original 2.47 radio rom you extracted from. Rebuilding the nk.nbf this way probably won't help. I will tell you that you should supply a language like "WWE" and versions like 2.47.11 and leave the CID code blank if you want to try it anyway.
Exactly what error message are you getting when you try to flash with the new radio rom?
I don't remember exactly what error it was, but Wizard stayed in three color mode and the flashing wizard showed "Error " and some number...
Can you try the flash again even though the Wizard is in bootloader mode? Sometimes the ROM Update Utility will find it even though it's in bootloader mode. It might help to disconnect the Wizard from USB, reboot the machine, wait for it to COMPLETELY boot up (disk activity dies down etc.) then connect the Wizard and listen for the "device connected" sound. Then try the flash again. Screen print the error and, if you can do all that OK, I'm sure we can get the new radio on there either by downgrading it and CID unlocking it or by using aWizard.
Good time of the day!
I have Orange SPV M2000 France. I received it without radio ROM. OK. I tryed update radio rom to new one from shipped packed (downloaded form this FTP). Device writes Radio ROM Update Error.
OK. I readed all posts about fixing this problem. Now I have not working Bluetooth (License Expired BDA 00:00:00:00:00:00) and no Radio ROM.
Also, sometime, it writes in Model ID filed not PH20B but random chars.
Bootloader version 2.07.
Have any idea how to repair this device?
May be flash it from SD card (but how create it and where I can found images for write to SD card?).
Thank you very mutch.
P.S. All other stuff works fine (I mean that this device works fine as PDA, but no Phone and, now, no Bluetooth).
Help, please.
try to upgrade radio rom using maupgradeut_noid.exe
xplode said:
try to upgrade radio rom using maupgradeut_noid.exe
Click to expand...
Click to collapse
Yes. I tryed. As I said I tryed all solutions from forum. No result. It freez on 0% when I use _NoID.
Any idea?
mtty
have you tryed this?
one of the commands cleans your storage, so do a backup first
Thank you. But yes. I tryed it too.
No result.
I think I need full flash for this device.
Sorry, guys. But have you any ideas how to repair my device?
May be somebody can dowload full-flesh from devices and upload it on FTP?
Have you gone through this page and if so what errors did you get and when.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
Yes. I did.
If I use Type II it reports Radio Update Error at 0%.
If I use Type I it freeze on 0% without reporting error.
If I use original (not NoID) then it reports CountryID error even [CHECKCEID_TYPE]=1 in .ini file.
Well I know for a fact that one user had a real painful radion install.
In the long run ir was a USB issue on his dektop.
I would try a different pc and follow wiki, dont mix your files TYPE I needs the type one update files and the fix.bat.
Type II the no_id
If you mix them it wont work.
Coutnry ID error is solved with Type II and No_id
OK. Thank you. I will try on second PC today.
OK. I tryed last solution. Same result. Radio update error.
I am really sorry. But anybody have solution?
I had my I-mate PDA2k with WM5_ArtZ_upgrade_WWE 1.7.1.3400_SD_ROM and it would not boot. So I found a fix on the forum using mtty 1.42. Know when I try to change my Rom back or change it to something else I get error 100: model id error 12-N-10-N-N. My operator should be T-Mob101, but when I get the data from the phone it says 0000A0000T%CID?.
Can I fix the opereator on the phone directly or can I get around this some how?
same problem
I have exactly the same problem!!! but mine is SX66 Siemens phone
cobrabite said:
I had my I-mate PDA2k with WM5_ArtZ_upgrade_WWE 1.7.1.3400_SD_ROM and it would not boot. So I found a fix on the forum using mtty 1.42. Know when I try to change my Rom back or change it to something else I get error 100: model id error 12-N-10-N-N. My operator should be T-Mob101, but when I get the data from the phone it says 0000A0000T%CID?.
Can I fix the opereator on the phone directly or can I get around this some how?
Click to expand...
Click to collapse
well i dont know how to fix this operator thing, but u can get around with by using MaUpgradeUt_noID tools.
if you are using helmi_c's rom, it's located under folder PH20B1. so just copy the rom file in there, set the oeprator as your T-Mob101 and flash.
u should also take out the SD card while flashing, just in case.
I tried all I found in this forum, but I couldn't solve the problem... I always get the ERROR [300] INVALID UPDATE TOOL
It seems that the only way to restore it is to load the original ROM, but I don't know which one it is (I suppose it's a WWE version...); I tried to get the device ID with the USB sniffer method, but it can't be read (Error!).
The internal label shows following:
P/N:99HCL042-00
IMEI:352442016058693
S/N:SZ705FS00599
and there is a second label with
1097-32-061445
SZ705FS00599
IPL/SPL are both 01.008.0001
Can anyone help me???
Thanks a lot,
Jeff
First of all, did you search the Wiki ?
Possibly your IPL/SPL is too low.
If you think that's the one, try to download the WWE official ROM and try to flash it.
You should tell where you found/bought the device and which was the version you were using before having the device dead.