BTW the title of the thread is supposed to start *Change*...!
basically, i find the constant vibration really annoying when receiving a text or call... especially a call! i no the butler app changes the call vibration to every 300 ms or something along those lines, but i could never get the program to work properly on my TP. i was wondering if anybody knew the registry tweak (if there is one) to edit vibration length.
manoli20 said:
BTW the title of the thread is supposed to start *Change*...!
basically, i find the constant vibration really annoying when receiving a text or call... especially a call! i no the butler app changes the call vibration to every 300 ms or something along those lines, but i could never get the program to work properly on my TP. i was wondering if anybody knew the registry tweak (if there is one) to edit vibration length.
Click to expand...
Click to collapse
Try looking in here
http://forum.xda-developers.com/showthread.php?t=464611
the thing with butler, i cant get it to run on my device. i have even had to hard reset because of it, so i dont want to fiddle with it nomore (which is a shame).
Is butler really the only way of changing the vibration?
I'm with you Manoli, Butler locked up my ROM also. Anyone have any other options.
Related
I got a warranty replacement Tilt last week. On my new device, I get no sounds or vibrations when entering numbers on the telephone dialer. My last Tilt used to make a sound as I entered numbers. I have Kaiser Tweak installed, but get nothing whether I set dialer button behavior to tones or vibrate. Any suggestions? I went to Sounds & Notifications and enabled sounds for Screen Taps and Hard Buttons, with still no change for the phone dialer.
did you try searching??
try these keywords:
- keypad vibrate
- keypad sound
and see if there is solution for your problem.
i guess there is, so i would suggest to use search in the future.
antihrist said:
did you try searching??
try these keywords:
- keypad vibrate
- keypad sound
and see if there is solution for your problem.
i guess there is, so i would suggest to use search in the future.
Click to expand...
Click to collapse
been there, done that, couldn't find a fix
are you sure?
http://forum.xda-developers.com/showthread.php?t=392235&highlight=keypad+vibrate
http://forum.xda-developers.com/showpost.php?p=2184513&postcount=2
have you tried this?
antihrist said:
are you sure?
http://forum.xda-developers.com/showthread.php?t=392235&highlight=keypad+vibrate
http://forum.xda-developers.com/showpost.php?p=2184513&postcount=2
have you tried this?
Click to expand...
Click to collapse
thanks, I had found the vibrate thread, but that wasn't what I was looking for. My search did not turn up the dialpad sound fix cab.
there is more than this one thread regarding vibrating dialpad. if this is not what you was looking for, than you could explain what you need in more details. link to sound fix was in keypad vibrate thread. please try searching. but for real this time. you can't expect to find solution with two clicks, you will need some time for serious customization of your phone.
Alright, First off I searched using the search here and using google using keywords of '' wake up, tilt, kaiser, text, notification, etc. ''.
But I couldn't find a answer to my question so, here I start a new thread. If anyone has owned a Blackberry, (dont kill me now lol) but when you recieved a text. your device wouldn't wake up from sleep untill you woke it up. is there something similar i could do with the tilt? any thanks would be appreciated. I had already searched google, tried diff. options on the device i couldnt figure it out. So I'm hoping I dont get flamed.
MB
bump 0 ha. hope no one gets mad.
Not sure about making it not wake up, but you can control the notifications to make it less intrusive. There's the built-in WM6 notification options, or if you want more control, the Kaiser Notifications program.
The thing is, I've tried threw the settings, nothing stopped the backlight from turning on when i get a text. I have Kaiser Notification for the LED's at the top, thats how it is on the blackberry. Your phones asleep but will still make a noise/vibrate and then a LED will alert you.
It's just annoying like in a movie where when you put your phone on vibrate and put it in the cupholder, the light still shines... not fun when your backlights all the way on. if you know what i mean
bump, but with a question.
or does anyone know a way so that when you recieve a text the backlight stays off instead of illuminating? any help would be apperciated.
MB
Backlight
I use PhoneAlarm Pro to handle my notifications for SMS and Email and it's setting for no backlight on SMS works fine for me.
Yup can verify that PhoneALarm does this .....
ryncppr said:
Yup can verify that PhoneALarm does this .....
Click to expand...
Click to collapse
I seen the option that I was looking for on there, but the thing is i dont want there interface. i like the interface of HTC Home, is there away to use it without having to use theres?
Good day, new here and hoping someone can assist with a question I am unable to find an answer for. I have a touch pro on the Sprint network, I have not cracked it or done much to this phone as I am still very new to this device (retired my Moto Q). The only customization I have done thus far is instal the transparent flip clock.
What I am hoping to do is edit the tone my keypad makes when using the TP as a phone. Right now the only options available when having the phones keypad up under menu>options> keypad is Off, Long tones, and Short tones. What i would like to do is make it more costum, perhaps by using the 'clicking' sound the new BB Storm makes when pressing, really anything but that annoying standard 'beep' or nothing at all.
Sorry if I missed something in the search or wiki, I did look but nothing doing.
Thanks in advance!
shanes17 said:
Good day, new here and hoping someone can assist with a question I am unable to find an answer for. I have a touch pro on the Sprint network, I have not cracked it or done much to this phone as I am still very new to this device (retired my Moto Q). The only customization I have done thus far is instal the transparent flip clock.
What I am hoping to do is edit the tone my keypad makes when using the TP as a phone. Right now the only options available when having the phones keypad up under menu>options> keypad is Off, Long tones, and Short tones. What i would like to do is make it more costum, perhaps by using the 'clicking' sound the new BB Storm makes when pressing, really anything but that annoying standard 'beep' or nothing at all.
Sorry if I missed something in the search or wiki, I did look but nothing doing.
Thanks in advance!
Click to expand...
Click to collapse
search in the reg under HKCU\controlpanel\sounds i think if no luck just search the reg for sounds folder. hope this helps
thanks for your response, i did find the keys, however they can only be changed to another numeric character. The keys are labeled Dtmf0, Dtmf1, Dtmf2, etc for each key. I verified this by changing some of them. So you can set the keys to make the seperate tones, such as making them all sound like your dialing '1', or make '9' have the '2' tone, etc, but I cant find a way to make it use a sound file, any advice? Hope I was clear enough on this.
Thanks again
-Shane
A lot of people have commented that the Raphael doesn’t announce the caller ID in blue tooth headsets. Some carriers have bundled the MS Voice Command application into the stock ROM with values that give you ring tone in blue tooth headset but no caller ID (this is true for the Verizon 6850 version, for example).
Here’s a quick and easy registry edit I found looking for a solution to this at PPC Geeks. I’ve tested it and it works like a charm.
This was the original text:
------------------------------
With this fix - the ring tone will play for a second and then be cut off by the call announcement. The announcement will be at a lower volume. The announcement will repeat - the ring tone will not be played again.
NOTE THAT YOU SHOULD ATTEMPT THIS FIX ONLY IF YOU ARE COMFORTABLE IN UPDATING YOUR REGISTRY.
Change the following registry keys:
HKCU\ControlPanel\Sounds\TTSAnnounce\Category
change from VoiceCommand1 to Ring
HKCU\ControlPanel\Sounds\TTSAnnounce\Script
change from as5p to v0p (that's v-zero-p) - for vibrate & ring, or p (ring only)
The above fix seems to get the announcements reliably, and doesn't break the set vibrate/set ringer features in the TF3D interface.
Hopefully we can find a better solution - that will restore the full functionality of Voice Command incoming call announcements - and not need this hack.
Another option is to manually overwrite the ringtone file name:
HKCU\ControlPanel\Sounds\RingTone0\Sound
change to \Application Data\Volatile\TTSCallerID.wav
This fix replaces the ringtone with the call announcement - and at full volume.
BUT this solution has several problems, including breaking the set vibrate/set ringer feature in TF3D.
Tried the first one, works as posted. Fuze, at&t test rom.
Thanks!
Sure
My pleasure--it was really annoying not to know was calling me when I'm walking around or driving.
Same here. I have a personal reason for wanting the call announcement in the blue tooth, rather than the speaker. I don't like blasting out who's calling me, or annoying ringtones to everyone else...LOL...kind of a pet peeve of mine.
I have a "borg implant" stuck in my ear 8-10 hours a day, and it is nice, when I'm working, NOT to have to pull the phone out of its case to see who's calling.
You would think that MS, HTC, or who ever is at fault for this "bug" can't fix it without someone having to hack the registry to get it to work like it is suppose to.
Once again, thanks!
Hi All,
Can someone tell me how I can change my dialer from inputting "long tones" when dialing to "short tones"?
Example... When I call my bank to check my acct. balance and enter my ATM card number, it always gets read wrong because of the length of the dialer / number tone and I am never able to get it right.
My Samsung Omnia was like this as well but it had an option for either "long button press tone" or "short button press tone" and I cannot seem to find this option on my SGS.
Can anyone advise on this? Does anyone know what Im talking about?
Anyone? Does anyone know how to change this or if there is even an option to do so?
Use Dialer One (search the Market). There you set the tone interval in miliseconds (unders settings).
And believe me... You will never use the stock dialer anymore
c3p9 said:
Use Dialer One (search the Market). There you set the tone interval in miliseconds (unders settings).
And believe me... You will never use the stock dialer anymore
Click to expand...
Click to collapse
How does this work exactly? Does it actually automatically replace the stock dialer or does it need to be started seperately everytime you make a call?
I dont mind the stcok dialed otherwise but I just wish I could figure out how to shorten the tones when dialing the phone.
This also only happens when I am already IN a call. When I make the initial call there is no actual tone sounds like a regular push button phone. It makes little "bloop" sounds instead... (Im sure you know what I mean... LOL!)
I have this same problem and it seems to happen at random, try disabling the touch tone sounds in the sound settings.
Nirvana388 said:
I have this same problem and it seems to happen at random, try disabling the touch tone sounds in the sound settings.
Click to expand...
Click to collapse
I have just tried that and I will let you know my findings. Thats kind of weird that this is the only way to do this and that there is no setting for it.
Nirvana388 said:
I have this same problem and it seems to happen at random, try disabling the touch tone sounds in the sound settings.
Click to expand...
Click to collapse
I have just tried that and I will let you know my findings. Thats kind of weird that this is the only way to do this and that there is no setting for it.
***EDIT*** Yes... This works but again it is awfully strange that there is no actual setting to switch this.
yiannisthegreek said:
How does this work exactly? Does it actually automatically replace the stock dialer or does it need to be started seperately everytime you make a call?
I dont mind the stcok dialed otherwise but I just wish I could figure out how to shorten the tones when dialing the phone.
This also only happens when I am already IN a call. When I make the initial call there is no actual tone sounds like a regular push button phone. It makes little "bloop" sounds instead... (Im sure you know what I mean... LOL!)
Click to expand...
Click to collapse
It replaces the original dialer (actually both can coexist). You just have to choose which icon to click. But I tell you. It's really a way better experience. Very customizable.