Related
Sorry for asking but ive checked the search and i cant seem to find it. Im looking for the original ROM 1.5 i think it was for the wizard...my phone wont do anything but go to the bootloader screen even after ive flashed it to 2.6 so im thinking i need to do the original ROM...anyways does anyone know where i can find it and download it? thanks for any help guys
oh i flashed it to what i think was 2.0...still the same bootloader problem but now it says IPL 1.01 and SPL 1.01...but still stuck at the bootlader screen...
Flash button rom:
http://forum.xda-developers.com/showthread.php?t=298613
i did that and now its still stuck at the bootloader screen with IPL 2.26 and SPL 2.26...somethings not right about my cell phone or something...any other ideas anybody?
XxShibbyxX said:
i did that and now its still stuck at the bootloader screen with IPL 2.26 and SPL 2.26...somethings not right about my cell phone or something...any other ideas anybody?
Click to expand...
Click to collapse
Have you read and followed this and the steps it points you to?
http://forum.xda-developers.com/showthread.php?t=298613
I assume you have a G3 since you are flashing these other roms, and based on the IPL/SPL numbers you are giving. You need to give us specifics of what you have done, what happened at each step and where you are at now. Details are a good thing, as its hard to diagnose with just bits of the information. At one point you say 2.6 (no idea what that is) then you say you are stuck at 1.01, and now you say 2.26. So please tell us (in gory detail!) what all you have done...
If you follow all the steps in the thread above you will get CID Unlocked, but at the point where you are now, you need to flash YOUR PROVIDER's original rom to get back to a known state. Then try doing the CID Unlock.
alright i was using molskis 3.0 and for some reason sometimes my phone would not dial or connect so i restart it once every few days...well i did a simple restart and when my phone turned back on it was on the bootloader screen with IPL and SPL of 2.26...i figured i would have to flash the rom again or go to an earlier one...so i get home and try to flash molskis 3.0 again...right after it finishes and restarts itself it comes up with the bootloader screen again...now at this point im thinking i might have to do an earlier one like the original t-mobile rom and so i tried that...same problem stuck at the bootloader screen but with IPL and SPL of 1.01...so i post and then vippie tells me to download the button rom...i try that and no luck still the same problem and i followed those steps exactly and no luck...so now my phones just sitting on my nightstand charging with a bootloader screen and nothing else and the IPL and SPL says 2.26...could it be internal damage or what? i like my phone and dont wanna have to spend the money on a new one but at this point im thinking i might have to...thanks mfrazzz for offering your help...i know i seem like a noob and i really suck at punctuation but im not stupid so anything you guys tell me to do in detail i will be able to try
I don't follow you anymore.... you got IPL/SPL 1.01 and tried to flash button rom, after this your IPL/SPL is 2.26? Impossible....
Sometimes it won't go past bootloader no matter what you do... do this to revive:
http://forum.xda-developers.com/showthread.php?t=276963
i have a tmobile wing and have a hard spl on it how do i go stock again??????
unpapi_4u said:
i have a tmobile wing and have a hard spl on it how do i go stock again??????
Click to expand...
Click to collapse
Back to the stock SPL? The only thing I can think off and it MAY NOT WORK OR BRICK YOUR DEVICE because I haven't tested it is using USPL to flash the stock RUU and hopefully that will overwrite the SPL.
From my understanding, the stock Tmo Wing RUU does have SPL and will over write it back to stock.
duprade said:
From my understanding, the stock Tmo Wing RUU does have SPL and will over write it back to stock.
Click to expand...
Click to collapse
Except that the HardSPL is coded not to let another SPL overwrite it. Using USPL should overwrite this lock.
duprade said:
From my understanding, the stock Tmo Wing RUU does have SPL and will over write it back to stock.
Click to expand...
Click to collapse
can't you strip the rom of the spl like on the wizard roms?
systematic said:
can't you strip the rom of the spl like on the wizard roms?
Click to expand...
Click to collapse
Yes. That will let you use any ROM, but if he wanted to go back to the stock SPL for warranty reasons, that would be the way to go, I would hope.
any one have USPL?
unpapi_4u said:
any one have USPL?
Click to expand...
Click to collapse
go to the open touch thread, you can find it in the first post there.
its not there.......anyone have a direct link?
unpapi_4u said:
its not there.......anyone have a direct link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=351966
i tried installing it but in step three the ruu dose work period.......any other way...or shuold i give up?
unpapi_4u said:
i tried installing it but in step three the ruu dose work period.......any other way...or shuold i give up?
Click to expand...
Click to collapse
I'm sorry. Please restate your post. I didn't quite understand it.
i found a eaiser way and u dont need a uspl all u need to do is get the stock ruu and run it. your phone is going to restart...simply put it back into bootloader mode without taking off the usb and your done!!!!!
unpapi_4u said:
i found a eaiser way and u dont need a uspl all u need to do is get the stock ruu and run it. your phone is going to restart...simply put it back into bootloader mode without taking off the usb and your done!!!!!
Click to expand...
Click to collapse
This will not overwrite HardSPL.
hey it just worked for me maybe some poeple should test it out 2
unpapi_4u said:
hey it just worked for me maybe some poeple should test it out 2
Click to expand...
Click to collapse
I don't understand. You HAD the HARDSpl installed in your phone? You ran the stock RUU and it automatically wrote the HardSPL even though the HardSPL was purposely coded not to allow that?
SO you say when installing a official RUU WITH SPL.nbh - the HArd-SPL will be overwritten??
Please clarify your devicesttings.
i tried it again and i missed a step (my bad)
here are the steps that worked for me......
step 1 :run the uspl (in the botton link of these steps) but in step 3 of the uspl program the ruu isnt going to work..
step 2 : put ur phone in bootloader run the stock ruu and at 1% the phone is going to restart and get out of bootloader..
step 3:simply put it back into bootloader (without disconnecting it to your computer) and let the stock ruu run...after go thru the steps...the align the screen put a pasword ect.. let it update the windows (if u dont want it to update then just soft reset the phone before it starts) and then your done.
http://forum.xda-developers.com/showthread.php?t=351966
just thot i'd co-sign for unpapi_4u
verified: wing can go from hard-spl to stock spl via uspl
1. download uspl aka flash center and wing factory ruu
2. copy RUU_signed.nbh and SPL.nbh from wing factory ruu to flash center
3. run it
completed successfuly with no intervention, didnt have to put in boot loader
after flashing i checked (soft reset while holding camera button)
spl was 4.10.0000
Bootloader--Stuck
Hi,
After trying the above, I now get the bootloader screen... showing IPL 4.17.0001 and SPL 4.10.0000.. Try flashing it with
Stock--RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe [Error 226 Flash Write] &
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe [Invalid Vendor ID] & RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe [Invalid Vendor ID].
I also tried alot of the cooked rom v4.0/V4.4/OpenTouch 2.4/
HERALD.ASERG.23F.WM6.RUS.PS6.rar but also get error message as file corrupt [#270]
I had the hardSPL installed before this..Trying to got back to stock rom because I am selling the phone. Do you guys have any suggestion?
Which ROM can I use to make it work.
My phone is the Dopod C800
Thanks in advance..
Eddie
format is failed after a power outage in the middle of ugrading with shell tool.
made it worse bu trying to flash with tmobiles latest rom.
so now i'm stuck in boot screen with the following
Device is g3 with
IPL 3.08
SPL 3:08
GSM 02.69.11
OS 3.8.2.1
did i mention CID unlocked?
please advice
rephrase
Let me rephrase the question.
I have a friend who saw me use shell tool to upgrade my cid locked wizard.
He went home to try the same on his cid locked g3 wizard.
he had bad luck and it was interrupted mid way through so he brought me his dead wizard.(stuck on bootloader)
The only official rom i had was Tmobile's 3.08 so i flashed it to try and revive it.
it flashed and finished but still stuck on bootloader.
when i try and hard reset it says "format is failed".
button rom wont work, wizard love wont work, sd method wont work as it is cid locked.
Any ideas?
And if none, will imei-check work..
Get the official stock ROM for his Wizard, then flash it and you will get a working Wizard back.
However, if the IPL and SPL still stays at 3.08, there is possibility that IPL and SPL not downgradeable, so unlocking may not be possible.
Another thing...by CID unlocking the Wizard, there is no reason to use ShellTool while you can actually use RUU directly! Using ShellTool may lead to incomplete update!
Not yet home
Hey, the stock rom (tmobile 3.08) succesfully flashes but the wizard still doesnt boot. it gets stuck on the first screen.
Any more ideas?
BTW i'm very experimental so i'll try anything..
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
pd2903 said:
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
Click to expand...
Click to collapse
Both solutions advised require WinCE to boot to be applied... which isn't the case here
hey
mestrini said:
Both solutions advised require WinCE to boot to be applied... which isn't the case here
Click to expand...
Click to collapse
So mestrini,
What to do??
will imei-check work?
And what exactly is format is failed?
Try this thread http://forum.xda-developers.com/showthread.php?t=298613
This worked for a friend of mine. he has a G3.
Peter
hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks
Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Ikkari said:
Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...
Click to expand...
Click to collapse
thats the problem
i dont know how?
D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?
D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Just look in the first post under:
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
very strange
its working now
just needed a hard reset!
thanks for your help
edit------------
scratch that, its displaying them stupid colours again
GREAT!
m.r.davies said:
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?
Click to expand...
Click to collapse
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15
Ikkari said:
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15
Click to expand...
Click to collapse
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks
m.r.davies said:
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks
Click to expand...
Click to collapse
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.
m.r.davies said:
hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks
Click to expand...
Click to collapse
1. dnload the stock spl from the said thread.
2. dnload the hspl 1.56 olinex wrapper
3. connect ur fone to pc in the bootloader mode.
4. run the hspl 1.56 olinex wrapper and do nothing to the onscreen utility.
5. wait fr the files to be xtracted in the window from where u ran the hspl wrapper.
6. replace the self extracted ruu_signed.nbh with the stock spl 1.15 that u downloaded.
7. continue with the ruu utility.
thats all thts needed..
ultimatepichu said:
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.
Click to expand...
Click to collapse
Thanks
yes you're right, it solved my problem
the reason i didn't try in the first place was becuase the title said HARD SPL and i didn't want to mess it up as i used USPL
i used Restore_Stock_SPL_115.zip and swapped the nbh file after initilizing installation (after extraction) and it worked great
thanks for all your help guys!!!!!!
i really appreiciate it
My god, I was feeling your anguish while reading this topic until the end...
Black Antitoon said:
My god, I was feeling your anguish while reading this topic until the end...
Click to expand...
Click to collapse
I eventually went to bed at 2:30am
all sorted now and got my new phone!
woohoo
Hi everbody
I used HARDSPL to flash cocked roms on my X1
the point is I have to send it to repair the keypad, I tried SE update center to flash the stock 6.1 ROM, but it didn't work as I expected, so I flashed the stock RUU_SIGNED from the sticked Hard SPL thread here, tried to update again using update center, and bingo, it's working, but my point is, what should the boot loader screen now be showing, mine shows
"KOVS110
SPL-0.78.0000
MicroP1-787
MicroP1-707"
any problems if I sent it to the repair center now?
thx
Maybe this topic can help you to find out how to restore SPL
read "how to restore Stock SPL for warranty reasons."
http://forum.xda-developers.com/showthread.php?t=431218
thx dreaminside
yes, I already did, I followed it
but I don't know if I succeeded or not
oh sorry for that
i forgot the default SPL number too.
http://forum.xda-developers.com/showthread.php?t=497511
4. How To Install The Stock Rom (For Warranty Reasons)
Download .mov file here 31mb (Quicktime Format)
try this one , maybe it will help you find out
black heart said:
Hi everbody
I used HARDSPL to flash cocked roms on my X1
the point is I have to send it to repair the keypad, I tried SE update center to flash the stock 6.1 ROM, but it didn't work as I expected, so I flashed the stock RUU_SIGNED from the sticked Hard SPL thread here, tried to update again using update center, and bingo, it's working, but my point is, what should the boot loader screen now be showing, mine shows
"KOVS110
SPL-0.78.0000
MicroP1-787
MicroP1-707"
any problems if I sent it to the repair center now?
thx
Click to expand...
Click to collapse
you're fine, that's how it should look like.
(actually, you reflashed stock-spl 0.72 and SEUS updated it to 0.78)
if you still had hard-spl on it, it would read "0.72.OliNex".
edit:
did you flash a stock-rom first or not? you should do that BEFORE flashing stock-spl... (in case you're using a custom rom)
Thanks dreaminside
caliban2 said:
you're fine, that's how it should look like.
(actually, you reflashed stock-spl 0.72 and SEUS updated it to 0.78)
if you still had hard-spl on it, it would read "0.72.OliNex".
edit:
did you flash a stock-rom first or not? you should do that BEFORE flashing stock-spl... (in case you're using a custom rom)
Click to expand...
Click to collapse
well, I couldn't flash stock rom using SEUS without first flashing Stock SPL, so yeah, I flashed SPL first, then ROM, but boot loader is still showing the same msg, so am I still fine ??
black heart said:
Thanks dreaminside
well, I couldn't flash stock rom using SEUS without first flashing Stock SPL, so yeah, I flashed SPL first, then ROM, but boot loader is still showing the same msg, so am I still fine ??
Click to expand...
Click to collapse
well, if SEUS didn't complain...
concerning the bootloader-figures you're fine.
Looking at your SPL its looks like you've been successful