Database Develop

restoring stock SPL

Hi there I know there is a sticky post about this. Bit I have now followed it several times and all seem to go fine but I still have OliNex 1.07 HSPL. is there another way to restore stock spl?
I wanna do this cause I keep getting green screen issue with new rom release

RochiWizz said:
is there another way to restore stock spl?
Click to expand...
Click to collapse
No, there is just one way, which is described within the HSPL thread.

Make sure you are using the SSPL and are flashing the correct image (by that I mean you're not re-flashing Hard SPL).
Any other problems please post in the Hard SPL thread - Thread closed.
Ta
Dave

[Q] Few ROM and SPL Questions

I've got a few questions, hope no one minds answering. If it's a simple case of RTFM then lock the thread and trash.
1. I've rooted and am using the latest JF build but when I go to telnet I can't connect to localhost anymore. Is this normal?
2. I'm running stock SPL and Radio (not too sure what the radio is btw). Is it best I update before flashing anymore roms?
3. I'm wanting to flash to Cyanogen Mod rom, it looks a lot more complex than simply renaming the rom to update.zip then flashing. Is it safe to assume that there is a lot more work to do? (if so a general point in the right direction would be greatly appreciated).
I really appreciate any help.
Thanks

1. I'm not sure as it has been some time since I last used JF's build I'm afriad...
2. Its advisable at the very least to upgrade your radio (look at my signature for a link). You can upgrade your SPL too providing you have flashed the latest radio FIRST and that you are on a PVT motherboard.
Boot into the SPL to find that out (turn off/reboot the mobile, Hold CAMERA+POWER). It should say at the top.
3. To use Cyanogen's ROM its like flashing any other ROM. Just make sure you have the latest Radio FIRST. Also I believe it works fine for non Apps2SD users so no need to partition your SD card etc to use it.
Hope that helps.

Stock SPL? do you mean HARDSpL?

alritewhadeva said:
Stock SPL? do you mean HARDSpL?
Click to expand...
Click to collapse
Unless it was updated while rooting it's probably "G1 Original SPL"
Thanks NeoBlade, I'll update the radio and spl tomorrow then probably try and get nandroid running so I've got a backup in case anything goes wrong.

No worries digital, just do your usual pre-checks before flashing the SPL and remember Radio first ^_-
You'll enjoy the new features and performance improvements using the latest cooked ROMs out there. Most of the info is in my signature but you can also flash the new Recovery image too by Cyanogen (http://forum.xda-developers.com/showthread.php?t=523558).
Not only can you create a Nandroid backup from there, you can also restore it too all from your mobile ^_^

Not to be an @ssh*le, but if you root your phone don't you already have the HardSPL? If you follow Koush's guide you were told to flash the HardSPL which isn't the stock SPL at all. Care to shed some light on this?

He could have had the engineering SPL, I remember having that briefly myself in the early days. The main thing is that he just wants to run Cyanogen's ROM so as long as he updates the radio and flashes the ROM without issues it should be fine. Unlike some Hero ROMs it doesn't require the latest SPL to create space for the ROM.
Granted though, its often always nice to have the latest stuff ^_-

Ok well if you DECIDE to update to the latest radio and SPL just go to my guide below and go to the second post. That will tell you how to install the radio and spl updates!
Good luck!

Indeed ^_^ And once that's done, perhaps change the title to SOLVED so people know. We shall have to wait for digital to get back to us about it.

This is the guide I used:
http://haykuro.theiphoneproject.org/?page_id=35
Sorry alritewhadeva:
I'm on the HardSPL so I guess I don't need to bother updating that again. I didn't get to the point where it said to update to the newest radio.
Reading a bit further it also says that I can do a backup easily using adb which is already setup. At some point in the process it must have installed the things needed for nandroid backup. I think it was the recovery.img part.
Thanks for the great link Nephron, I used it before to setup adb on my netbook (running win7 on my main machine).
Before I flash the latest radio is it safe to do this *after* updating the spl?
Thanks for all the great help, I really appreciate it.

As a thumb of rule, always flash the radio first before the SPL and the ROM.
Tell us how it goes ^_^ If you've managedto do it, could you please edit the title then to add SOLVED? Good luck.

Soo do you have to flash the radio and SPL everytime you want to flash a rom??? i already have the latest radio, i just want to make sure i dont make a mistake

Tr1n1Jay said:
Soo do you have to flash the radio and SPL everytime you want to flash a rom??? i already have the latest radio, i just want to make sure i dont make a mistake
Click to expand...
Click to collapse
No you don't. Only once... then kind of keep an eye on the forum to see if better radio or SPL comes along. So far I had to update my radio once. What recovery image do you have (home+power), is it still JF1.43? You should update that to CM 1.4, you get a lot more flexibility with that... read up on it in development forum. All in all, unless you plan to install Hero anytime soon (and I personally don't recommend it, too slow and buggy) you should be good with (in that very order)
1. Flashing newest RADIO (Haykuro has it in the link you provided, only need to do it once and you already did it!)
2. Flashing HardSPL (you already did that too! no need to do it again)
2. Updating your Recovery Image (once more, this only needs to be done once)
After that - flash any rom you feel like at any time you feel like doing it.
Hope that helps, good luck!

I agree with everything borodin1 said. If you're on a 1.5 ROM you really should have the new radio already, but you can always go back and flash it. Afterwards you'll want hard SPL or haykuro's. Haykuro's is what you'll need for most HTC based ROMs (Hero, Rogers). Most people brick when flashing Haykuro's ROM because they don't read. Aslong as you have the new radio and a PVT phone (go to the bootloader - home + camera - and it should say PVT) you will be fine.

Can I go back to the original Xperia X1 ROM?

I'm tired of using all these different cooked ROMS' and each of them have a different problem...some are slow...some are buggy...or maybe it's just my stupid phone/T-Mobile network...or all because it's Microsoft WIndows.
In any case, I'd try going back to Son'y original ROM, is there a way to do that?

shahmed said:
I'm tired of using all these different cooked ROMS' and each of them have a different problem...some are slow...some are buggy...or maybe it's just my stupid phone/T-Mobile network...or all because it's Microsoft WIndows.
In any case, I'd try going back to Son'y original ROM, is there a way to do that?
Click to expand...
Click to collapse
No, never - ever!!!

shahmed said:
I'm tired of using all these different cooked ROMS' and each of them have a different problem...some are slow...some are buggy...or maybe it's just my stupid phone/T-Mobile network...or all because it's Microsoft WIndows.
In any case, I'd try going back to Son'y original ROM, is there a way to do that?
Click to expand...
Click to collapse
slow ?? bugs ??
hmmm...
you don't know the power of the dark side
...or you have not flashed the pure SEX1 R5

Hi! Yes you may install the stock ROM same way you've been installing the Cooked ROM's.
Just Find the original stock one in this Forum's ROM Section (it is a Sticky).
If you use the sdcard method is more simple. After finding the stock Rom xxx.nbh file, just rename it to "Kovsimg.nbh".
Hope this helps.

I just did the same 2 days ago. You can find the stock WM 6.1 Roms HERE.
And as said just rename the image file to Kovsimg.nbh and flash it like any other Rom.

shahmed said:
I'm tired of using all these different cooked ROMS' and each of them have a different problem...some are slow...some are buggy...or maybe it's just my stupid phone/T-Mobile network...or all because it's Microsoft WIndows.
In any case, I'd try going back to Son'y original ROM, is there a way to do that?
Click to expand...
Click to collapse
Is it now? I waited one year 'til my warranty expires and now that it's 8 days over I'm seeing this. hehehe. by any chance, is this reverting back to original rom will really re-virginize your Xperia? Re-virginize as in Nintendo Wii re-virginize?. Just wanna be sure though.

Hi, I have a question … I'm still running WM6.1 with a stock R3AA010 ROM. I'm considering installing one of the WM6.5 ROMs (gtrab's SEX1 R5 BareBone ROM). To do this I need to install the HardSPL, I know. If I want to go back to the stock ROM will R3AA010 install using the HardSPL or do you have to re-install the Stock-SPL. If so how do you do that? I'm sorry if these are noob questions, but the guides aren't absolutely clear on this point - or maybe its I'm a little thick

nonno said:
Hi, I have a question … I'm still running WM6.1 with a stock R3AA010 ROM. I'm considering installing one of the WM6.5 ROMs (gtrab's SEX1 R5 BareBone ROM). To do this I need to install the HardSPL, I know. If I want to go back to the stock ROM will R3AA010 install using the HardSPL or do you have to re-install the Stock-SPL. If so how do you do that? I'm sorry if these are noob questions, but the guides aren't absolutely clear on this point - or maybe its I'm a little thick
Click to expand...
Click to collapse
If you've Hard-SPL and put a custom ROM in but want to change to an official rom, just download the rom and flash as you would a custom rom.
You don't have to put Stock-SPL if you don't want to. But if you someday wanna leave it in for repair etc, then you will have to put Stock-SPL on it, for guarantee reasons.

dogans said:
If you've Hard-SPL and put a custom ROM in but want to change to an official rom, just download the rom and flash as you would a custom rom.
You don't have to put Stock-SPL if you don't want to. But if you someday wanna leave it in for repair etc, then you will have to put Stock-SPL on it, for guarantee reasons.
Click to expand...
Click to collapse
Thanks for the clarification dogans. So just to be clear, if I revert from a custom ROM back to a stock ROM the Stock-SPL isn't installed as part of the process. You have to install it afterward, just as you do with the Hard-SPL - Yes?

As far as i know, the HardSPL cant' be overridden by a usual stock ROM. You have to manual flash the original SPL.
Using a stock ROM with HardSPL isn't a problem, but i can't tell you how to get the original stock SPL back if you did _not_ back it up before (thats what i did -.-).
Maybe someone can tell me how to do this, would be very nice

nonno said:
Thanks for the clarification dogans. So just to be clear, if I revert from a custom ROM back to a stock ROM the Stock-SPL isn't installed as part of the process. You have to install it afterward, just as you do with the Hard-SPL - Yes?
Click to expand...
Click to collapse
Correct. Stock-SPL isn't included in stock ROM.
You will have to flash that separately.

my xperia x1 can't change rom anymore.. after i change original rom to htc rom(i don't back up the original rom), i can't change it with another rom. plizz help me how to solve this problem.. i'm really want to change it into windows mobile 6.5 pure rom.. thanks..

yes,i am whith Nand version of Android caynogen from Alex,but i want my old WM and i cant go back because it wont make an any conection with the PC...please help us

casper4o said:
yes,i am whith Nand version of Android caynogen from Alex,but i want my old WM and i cant go back because it wont make an any conection with the PC...please help us
Click to expand...
Click to collapse
have you tried to go in bootloader mode (3-color-screen) turn phone off. Than press vol down button and camera button until you see a 3 color screen, then you you can put in your USB cable and flash a rom you like the same way you did it with the android rom.

[Q] Please i need ur help........!!!!!!!

hey guys,i have a problem with my xperia x1,i was installing costume rom then it was not good so i tried to go back to the official one from sonyericsson,any way i was doing that but before that i made a task 29 to clean the device first then i tried to make a stock spl to install the official one but i found that the task 29 is doing that by it self,so i tried to install the official using the update service but this stupid new update of that program is rely so bad because its telling me that i have the latest update for my device and that all then exit, and i remember before that new update i can reinstall the rom even its telling me that but now i cant,so my phone is out of working now, so please i need ur help, if any one can...... thank you guys

madadody16 said:
then i tried to make a stock spl to install the official one but i found that the task 29 is doing that by it self
Click to expand...
Click to collapse
Task 29 does not install stock spl by itself

don't start flashing roms until you've read and fully understood all guides...?!
SE update doesn't work with hard-spl installed - which you still have. task29 doesn't change that.
you need to download your stockrom from here and flash it via usb or microsd.
after that's done, you can decide if you want to keep hard-spl or if you want to restore stock-spl, which is needed to use SEUS. (but since you already have stockrom, why bother?)
how to restore stock-spl is explained in the hard-spl thread, end of post #1. follow the instructions there closely, or you will brick your phone! flashing spl requires a special .exe, don't use the one from task29, a custom-rom or whatever!

I know how to flash roms and spl but...

i used many roms and lately i decided to return to stock rom.
but i did a mistake.
i used :
flashed Task29 then flashed X1_STOCK_SPL_072.zip
right now i cant use seus. and i cant hardspl to use custom roms.
i looked up for any solution here but i didnt find something worked with me.
only some one post saying :
"You need to obtain the stock rom (does not have to be recent) install it, then revert back to
stock hardspl, then you can use SEUS to update to the latest."
OliNex said:
extra how to: how to restore Stock SPL for warranty reasons.
step by step:
- this is ONLY for warranty reasons. i.e. the device needs repair and you have to send it to htc to get it serviced. if you plan to restore hardspl then don't even bother flashing this stock package, unless you are some kind of hacker/dev
- IMPORTANT:be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
Click to expand...
Click to collapse
I did exactly the opposite.
i cleard the OS. then flashed stock spl.
right now i am downloading SonyEricsson_X1i_firmware_GENERIC_UK_R3AA010.
so my question is =>
shoud i use ROMUpdateUtility.exe with SonyEricsson_X1i_firmware_GENERIC_UK_R3AA01 when i am on stock spl. and it will work? and if it not going to work.
what shoud i do to at least flash hard spl. so i can use custom roms again.
Ok it work fine now..
so i case any one did do that again.
no OS + stock spl
then u must flash a stock from and then go on as ur life were befor xD

You must hard spl your x1 again and follow these steps.
1: rename image of stock rom to ruu_signed.nbh
2: use ROMUpdateUtility.exe and flash ruu_signed.nbh as normal custom rom
3: Hardreset and let x1 bootup
4: flashed X1_STOCK_SPL_072
5: Hardreset and let x1 bootup
6: use seus to upgrade to latest stock rom
REMEMBER YOU MUST FLASH STOCK ROM BEFORE STOCK SPL
Good Luck
I hope that helps
EDIT: oooopppsss you solve it did not saw last line of your post