I'm tired of using all these different cooked ROMS' and each of them have a different problem...some are slow...some are buggy...or maybe it's just my stupid phone/T-Mobile network...or all because it's Microsoft WIndows.
In any case, I'd try going back to Son'y original ROM, is there a way to do that?
shahmed said:
I'm tired of using all these different cooked ROMS' and each of them have a different problem...some are slow...some are buggy...or maybe it's just my stupid phone/T-Mobile network...or all because it's Microsoft WIndows.
In any case, I'd try going back to Son'y original ROM, is there a way to do that?
Click to expand...
Click to collapse
No, never - ever!!!
shahmed said:
I'm tired of using all these different cooked ROMS' and each of them have a different problem...some are slow...some are buggy...or maybe it's just my stupid phone/T-Mobile network...or all because it's Microsoft WIndows.
In any case, I'd try going back to Son'y original ROM, is there a way to do that?
Click to expand...
Click to collapse
slow ?? bugs ??
hmmm...
you don't know the power of the dark side
...or you have not flashed the pure SEX1 R5
Hi! Yes you may install the stock ROM same way you've been installing the Cooked ROM's.
Just Find the original stock one in this Forum's ROM Section (it is a Sticky).
If you use the sdcard method is more simple. After finding the stock Rom xxx.nbh file, just rename it to "Kovsimg.nbh".
Hope this helps.
I just did the same 2 days ago. You can find the stock WM 6.1 Roms HERE.
And as said just rename the image file to Kovsimg.nbh and flash it like any other Rom.
shahmed said:
I'm tired of using all these different cooked ROMS' and each of them have a different problem...some are slow...some are buggy...or maybe it's just my stupid phone/T-Mobile network...or all because it's Microsoft WIndows.
In any case, I'd try going back to Son'y original ROM, is there a way to do that?
Click to expand...
Click to collapse
Is it now? I waited one year 'til my warranty expires and now that it's 8 days over I'm seeing this. hehehe. by any chance, is this reverting back to original rom will really re-virginize your Xperia? Re-virginize as in Nintendo Wii re-virginize?. Just wanna be sure though.
Hi, I have a question … I'm still running WM6.1 with a stock R3AA010 ROM. I'm considering installing one of the WM6.5 ROMs (gtrab's SEX1 R5 BareBone ROM). To do this I need to install the HardSPL, I know. If I want to go back to the stock ROM will R3AA010 install using the HardSPL or do you have to re-install the Stock-SPL. If so how do you do that? I'm sorry if these are noob questions, but the guides aren't absolutely clear on this point - or maybe its I'm a little thick
nonno said:
Hi, I have a question … I'm still running WM6.1 with a stock R3AA010 ROM. I'm considering installing one of the WM6.5 ROMs (gtrab's SEX1 R5 BareBone ROM). To do this I need to install the HardSPL, I know. If I want to go back to the stock ROM will R3AA010 install using the HardSPL or do you have to re-install the Stock-SPL. If so how do you do that? I'm sorry if these are noob questions, but the guides aren't absolutely clear on this point - or maybe its I'm a little thick
Click to expand...
Click to collapse
If you've Hard-SPL and put a custom ROM in but want to change to an official rom, just download the rom and flash as you would a custom rom.
You don't have to put Stock-SPL if you don't want to. But if you someday wanna leave it in for repair etc, then you will have to put Stock-SPL on it, for guarantee reasons.
dogans said:
If you've Hard-SPL and put a custom ROM in but want to change to an official rom, just download the rom and flash as you would a custom rom.
You don't have to put Stock-SPL if you don't want to. But if you someday wanna leave it in for repair etc, then you will have to put Stock-SPL on it, for guarantee reasons.
Click to expand...
Click to collapse
Thanks for the clarification dogans. So just to be clear, if I revert from a custom ROM back to a stock ROM the Stock-SPL isn't installed as part of the process. You have to install it afterward, just as you do with the Hard-SPL - Yes?
As far as i know, the HardSPL cant' be overridden by a usual stock ROM. You have to manual flash the original SPL.
Using a stock ROM with HardSPL isn't a problem, but i can't tell you how to get the original stock SPL back if you did _not_ back it up before (thats what i did -.-).
Maybe someone can tell me how to do this, would be very nice
nonno said:
Thanks for the clarification dogans. So just to be clear, if I revert from a custom ROM back to a stock ROM the Stock-SPL isn't installed as part of the process. You have to install it afterward, just as you do with the Hard-SPL - Yes?
Click to expand...
Click to collapse
Correct. Stock-SPL isn't included in stock ROM.
You will have to flash that separately.
my xperia x1 can't change rom anymore.. after i change original rom to htc rom(i don't back up the original rom), i can't change it with another rom. plizz help me how to solve this problem.. i'm really want to change it into windows mobile 6.5 pure rom.. thanks..
yes,i am whith Nand version of Android caynogen from Alex,but i want my old WM and i cant go back because it wont make an any conection with the PC...please help us
casper4o said:
yes,i am whith Nand version of Android caynogen from Alex,but i want my old WM and i cant go back because it wont make an any conection with the PC...please help us
Click to expand...
Click to collapse
have you tried to go in bootloader mode (3-color-screen) turn phone off. Than press vol down button and camera button until you see a 3 color screen, then you you can put in your USB cable and flash a rom you like the same way you did it with the android rom.
Related
I've been toying with the idea of putting a cooked rom on my standard kaiser.
My question is if I do so and then decide I dont like the new rom for whatever reason, can I get a copy of the original stock 6.0 version from somewhere to re-install?
Thanks
astromex said:
I've been toying with the idea of putting a cooked rom on my standard kaiser.
My question is if I do so and then decide I dont like the new rom for whatever reason, can I get a copy of the original stock 6.0 version from somewhere to re-install?
Thanks
Click to expand...
Click to collapse
From the Sticky
Updated: Reverting back to the SHIPPED ROM and SPL for Warranty or return
Ta
Dave
you will not want to revert, make sure you choose a decent rom to flash, and you will be chuffed to bits,
Hi, i got the HD in March, and just wonder the benefits of installing a custom rom. Like Dutty's (seems to be popular). I read the threads of the contents in the rom , but what would you push for in this custom roms that isn't in the original rom.
If i flash it, is there a "easy" way to get back to original rom? I guess i HAVE to flash the rom back to original?
Is it diffrent original roms for diffrent countries?
Does the customs incl,
Landscapce mode in sms,mail, browse?
Nice calender, original sucks (looks like win 3.11)?
Last silly question, is there other themes fo customs?
I have understood that the Manilla is the graphical layout, or am i out in the bushes??
/Micke
Yeah, the only way to get back to a stock ROM is by reflashing it (don't worry though, there are plenty of links to those around here).
And while flashing itself is not without a risk (you can always "brick" your device), I'd say it's well worth it. Custom ROMs generally offer more speed, often more stability (especially those made by well-known chefs), new features (Manila/TouchFlo from the new HTC phones, Touch Diamond2 and Touch Pro2, which includes a newer, nicer calendar) and yes, they very often do have advanced screen rotation.
My Blackstone is currently sporting Davideuck's V-4_HP (that's a WMo 6.1 ROM with the new Manila) and it's probably the best ROM I've ever had on my phone. I recommend you to try that one.
As for themes, yeah, there are a few, especially in Blackstone's "Themes and Applications" subforum. And yep, you understood correctly, Manila (or Touch Flo 3D, as HTC likes to call it) is the graphical interface.
Ok, thanks for the answers. And if you see a thread with a link to a "swedish rom" notify me
So if i understood things right, i install hspl on the phone, boot it up in that "special way" flash it by SD card or custonruu on pc.
Either i put it on the root of the sd card and flash the rom och start customruu on the pc and choose the rom file from there?
drgregur said:
Ok, thanks for the answers. And if you see a thread with a link to a "swedish rom" notify me
So if i understood things right, i install hspl on the phone, boot it up in that "special way" flash it by SD card or custonruu on pc.
Either i put it on the root of the sd card and flash the rom och start customruu on the pc and choose the rom file from there?
Click to expand...
Click to collapse
Not if you want to flash Dutty's 2.7 or 2.8. You have to use USPL 2.5 and flash a stock 1.56 ROM in advance. Instructions on how to do this are included in the thread of this ROM.
Ok, whats the diffrent between USPL and HSPL ? Can i flash other rom with USPL ? Why do i need to "install" a stock rom 1.56?
Correct me if I'm wrong, but if you already have stock ROM and have never used HSPL to change your stock SPL, then all you have to do is flash to the new stock HTC ROM (which contains the new SPL you need), and then use USPL to flash a custom ROM.
So if I understood it correctly, this is the way to do it..
I too feel like I'm ready to install a custom ROM and was either considoring
Dutty's or Davaideucks's ROM's but what I wanted to know was, even though
these ROM's maybe more stable and faster, how buggy are they?
currently running duties 3.7
but need to send phone back
where can I get the orange rom from?thanks
Check out the wiki, the links to stock ROMs are there.
go to the hard SPL thread.Everything you need is there mate go back one page
thanks guys
for the sake of anyone jumping to this thread from google:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
as i have 3.7 of dutties, do i need to do anything with SPL or can i flash the orange rom the same way as i flashed dutties 3.7 ?
Cheers
i don't think so, but i'd suggest using uspl of the spl of your hd
007K said:
i don't think so, but i'd suggest using uspl of the spl of your hd
Click to expand...
Click to collapse
sorry just to clarify,
are you saying i should use the blac_uspl.exe file i used to flash dutties 3.7 ?
cheers
m.r.davies said:
sorry just to clarify,
are you saying i should use the blac_uspl.exe file i used to flash dutties 3.7 ?
cheers
Click to expand...
Click to collapse
well since ull be flashing an original rom uspl will not be needed..
you can actually download the official ROM from HTC website (at least in Asia, not sure about Europe). In fact, from HTC website, they have telco-specific ROM (such as Starhub and Telstra).
I have done it before, downgrading dutty 3.7 ROM to stock/official using the official ROM update package, and it'll revert back my SPL to 1.12 as well. But I was on SPL/USPL, so I'm not sure with your hard SPL, would your base be downgraded as well, but my guess is it should.
zenkinz said:
you can actually download the official ROM from HTC website (at least in Asia, not sure about Europe). In fact, from HTC website, they have telco-specific ROM (such as Starhub and Telstra).
I have done it before, downgrading dutty 3.7 ROM to stock/official using the official ROM update package, and it'll revert back my SPL to 1.12 as well. But I was on SPL/USPL, so I'm not sure with your hard SPL, would your base be downgraded as well, but my guess is it should.
Click to expand...
Click to collapse
thanks
i'm using USPL too
Sorry to sound a dumb ass, but i want to make sure i get this right, cant find much on down grading just upgrading
i've downloaded this file
RUU_BlackStone_Orange_UK_1.19.61.1.rar
and it extracts as
ruu_signed.nbh
can i just use this file from dutties rom
BlackstoneRUUWrapper.exe
and put the .nbh file in the same folder?
the only method i know how to flash is as below
1. put phone into bootloader mode
2. run blac_uspl.exe (for 1.56 roms)
3. wait for the cmd prompt to establish a connection
4. run BlackstoneRUUWrapper.exe which had the dutties rom in same folder
based on that info, do i do that same thing to downgrade?
if someone could let me know which steps i need to follow/mis out that would be great thanks
m.r.davies said:
thanks
i'm using USPL too
Sorry to sound a dumb ass, but i want to make sure i get this right, cant find much on down grading just upgrading
i've downloaded this file
RUU_BlackStone_Orange_UK_1.19.61.1.rar
and it extracts as
ruu_signed.nbh
can i just use this file from dutties rom
BlackstoneRUUWrapper.exe
and put the .nbh file in the same folder?
the only method i know how to flash is as below
1. put phone into bootloader mode
2. run blac_uspl.exe (for 1.56 roms)
3. wait for the cmd prompt to establish a connection
4. run BlackstoneRUUWrapper.exe which had the dutties rom in same folder
based on that info, do i do that same thing to downgrade?
if someone could let me know which steps i need to follow/mis out that would be great thanks
Click to expand...
Click to collapse
well just run ruuwrapper. no need to run black uspl.
cvchetan said:
well just run ruuwrapper. no need to run black uspl.
Click to expand...
Click to collapse
thanks fella, i shall give that a go
much appreciated
m.r.davies said:
thanks fella, i shall give that a go
much appreciated
Click to expand...
Click to collapse
Since you have Dutty's 3.7 on your device at the moment and you are going to restore the stock Orange rom you need to restore the stock SPL that came on your phone before you flash the rom. Otherwise you will be running a newer SPL that is not supported with the older Orange rom and will have distortion and compatibility issues.
To restore your phone to stock you need to:
1. Flash original SPL - most likely 1.14.0000 since the rom versions for Orange are 1.14.xxxx and 1.19.xxxx.
2. Flash original rom.
If you need help restoring the original SPL look in the HSPL thread where it says "How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!"
If you still can't figure it out after that, let me know.
also take note of youre sending it back due to faults they wont checkit they just send you another and replace the motherboard
i knoiw because i asked what they didwenthey gotr the broken ones back
Just a couple of quick questions, have searched but couldn't find an answer.
Firstly, have been having a few problems with a lot of the custom ROMs I've been using recently, they usually work well for a while, then start going wrong. I've heard you're meant to flash a stock ROM in between each custom one, was wondering if that's true, as I've never seen it written anywhere. I flash using USPL if it matters. Currently using Dutty's Leo R5, which has also just started going wrong for me.
Also out of interest, how would I go about flashing a stock ROM? Same process as normal? And where would I be able to get the latest one from?
Cheers for any help.
Tyrrell9 said:
Just a couple of quick questions, have searched but couldn't find an answer.
Firstly, have been having a few problems with a lot of the custom ROMs I've been using recently, they usually work well for a while, then start going wrong. I've heard you're meant to flash a stock ROM in between each custom one, was wondering if that's true, as I've never seen it written anywhere. I flash using USPL if it matters. Currently using Dutty's Leo R5, which has also just started going wrong for me.
Also out of interest, how would I go about flashing a stock ROM? Same process as normal? And where would I be able to get the latest one from?
Cheers for any help.
Click to expand...
Click to collapse
I've never once flashed back to a stock rom in-between custom roms (and I've tried a few) .
But I have also heard that it works for some people having issues with flashing. If you are using uspl, then your stock spl is still intact and you should just be able to flash back to a stock rom (AFAIK in any case - sorry you can see I use hspl)
You can find many of the shipped roms (stock) here
Depending on the rom you choose and your current spl you may get the blue/green screen after the flash, but that would only be due to a rom/spl mismatch.
Thanks for the help, gonna flash a stable ROM for the next few days I think. Just one other thing I've been thinking of, I've got SPL 1.54 showing up in bootloader mode. You know if that's still the one you're supposed to use? Not sure if it should be 1.56?
Tyrrell9 said:
Thanks for the help, gonna flash a stable ROM for the next few days I think. Just one other thing I've been thinking of, I've got SPL 1.54 showing up in bootloader mode. You know if that's still the one you're supposed to use? Not sure if it should be 1.56?
Click to expand...
Click to collapse
Is it still 1.54.0000? This is actually an updated stock spl which you loaded when using uspl, so you should be able to just flash one of the later version stock roms. There is no need to downgrade your spl to your original (unless of course you need to return your phone for service)
1.56 is only as a result of using hspl and AFAIK there is no stock 1.56 version.
ClydeB1 said:
Is it still 1.54.0000? This is actually an updated stock spl which you loaded when using uspl, so you should be able to just flash one of the later version stock roms. There is no need to downgrade your spl to your original (unless of course you need to return your phone for service)
1.56 is only as a result of using hspl and AFAIK there is no stock 1.56 version.
Click to expand...
Click to collapse
Ah that's alright then, yeah it is still 1.54.0000. I'd just seen something about SPL 1.56 mentioned, so I wondered if there was a newer version of that stock spl. I'll find another ROM to flash for now, seems like I've been doing everything right. Thanks again for your help.
Tyrrell9 said:
Just a couple of quick questions, have searched but couldn't find an answer.
Firstly, have been having a few problems with a lot of the custom ROMs I've been using recently, they usually work well for a while, then start going wrong. I've heard you're meant to flash a stock ROM in between each custom one, was wondering if that's true, as I've never seen it written anywhere. I flash using USPL if it matters. Currently using Dutty's Leo R5, which has also just started going wrong for me.
Also out of interest, how would I go about flashing a stock ROM? Same process as normal? And where would I be able to get the latest one from?
Cheers for any help.
Click to expand...
Click to collapse
Flashing back to stock ROM worked for me, my spl has bee upgraded since i started flashing (first one was Dutty 3.9XT). This solved many of my problems encountered flashing the latest Win 6.5 + Manila 2.5 ROMS.
Tyrrell9 said:
Ah that's alright then, yeah it is still 1.54.0000. I'd just seen something about SPL 1.56 mentioned, so I wondered if there was a newer version of that stock spl. I'll find another ROM to flash for now, seems like I've been doing everything right. Thanks again for your help.
Click to expand...
Click to collapse
My pleasure - hope you come right.
jigners said:
Flashing back to stock ROM worked for me, my spl has bee upgraded since i started flashing (first one was Dutty 3.9XT). This solved many of my problems encountered flashing the latest Win 6.5 + Manila 2.5 ROMS.
Click to expand...
Click to collapse
What stock ROM have you been using? I've only been having problems with 6.5 roms, 3.9xt was the only one I've used so far that's worked flawlessly.
Hallos Tyrrell9,
they usually work well for a while, then start going wrong.
Click to expand...
Click to collapse
Fortunatly we are dealing with a form of Windows and as in any windows there is not so much difference. This means that it is silly to think that the same windows OS u installed is running as well or the same as to when u first installed it. We have to MAINTAIN it....
Think of ur phone rom as if it were a windows version on a regular PC. What happens after a few weeks is that it gets cluttered with unnused registry keys (even from installing and uninstalling apps), cache files, temp files and all other junk that gets installed by default. This means that u as a user have to clean it once in a while to get get rid of all this stuff that is going to make ur windows and thus ur phone slow after a while. Fortunatly there is help for us to do so. I use Pocket Mechanic and SKTools for this reason. Another thing is that u can look at the windows startup folder to see what is started. The less it is starting the faster and snappier ur phone will be..
I think it is also silly to think that u have to reflash a new rom every other day. I only flash a new rom if i see some major upgrades in the new one.
I hope this helps some...
Greetz
Caved
caved said:
Hallos Tyrrell9,
Fortunatly we are dealing with a form of Windows and as in any windows there is not so much difference. This means that it is silly to think that the same windows OS u installed is running as well or the same as to when u first installed it. We have to MAINTAIN it....
Think of ur phone rom as if it were a windows version on a regular PC. What happens after a few weeks is that it gets cluttered with unnused registry keys (even from installing and uninstalling apps), cache files, temp files and all other junk that gets installed by default. This means that u as a user have to clean it once in a while to get get rid of all this stuff that is going to make ur windows and thus ur phone slow after a while. Fortunatly there is help for us to do so. I use Pocket Mechanic and SKTools for this reason. Another thing is that u can look at the windows startup folder to see what is started. The less it is starting the faster and snappier ur phone will be..
I think it is also silly to think that u have to reflash a new rom every other day. I only flash a new rom if i see some major upgrades in the new one.
I hope this helps some...
Greetz
Caved
Click to expand...
Click to collapse
All true, but some of us have this strange addiction that needs to be satisfied regularly....
Undoubtedly and Unashamedly a member of Flashaholics United
Hallos ClydeB1,
If u enjoy flashing 4 roms a day to see if one or other rom will run better go right ahead, that seem to be a hobby in itself for some people. If thats is doing any good to you or ur HD ? Doubtfull but who am i to judge...
I just said that things don't have to go bad after a period of time becouse it doesn't have to be that way, u are the boss and not ur windows OS.
Greetz
Caved
Is there really any difference bettwen OliNex v0.70 and 1.4 or what's the newest version?
i meen why would people put new version, if the old one is doing the same thing?
and also, is it bad for my xperia x1 to install a 3 different custom rom for a DAY i am just checking which is the best one, and why when i install a new rom, old "NOW PLAYING" in windows media player stays?
what should i do, to install clean ROM?
Thank you
milancex said:
Is there really any difference bettwen OliNex v0.70 and 1.4 or what's the newest version?
i meen why would people put new version, if the old one is doing the same thing?
and also, is it bad for my xperia x1 to install a 3 different custom rom for a DAY i am just checking which is the best one, and why when i install a new rom, old "NOW PLAYING" in windows media player stays?
what should i do, to install clean ROM?
Thank you
Click to expand...
Click to collapse
I'm not aware of an OliNex version other than 0.72 (except for the mfg spl of course), which hasn't been updated for quite some time
so if you found a v1.4 for the X1 post it here
to erase possible leftovers it's been reported to either flash a stock rom before flashing custom one ore using task29 (rom dev)
do some research and decide for yourself whether to try one of them or not
Best, DK
i have not found v1.4 olinex, i have 0.72 i'm sorry typing error, so what is the difference between your 1.0 and mine 0.72? (they have the same purpose)
hmm, okey, but how to install a stock rom? i know how to install a custom rom, just transfer to sdcard and boot with volume button down.. is it same for stock roms?(just rename it to kovsimg.nbh) where to find stock roms? when i install stock rom, will i still have olinex hard spl?
milancex said:
i have not found v1.4 olinex, i have 0.72 i'm sorry typing error, so what is the difference between your 1.0 and mine 0.72? (they have the same purpose)
hmm, okey, but how to install a stock rom? i know how to install a custom rom, just transfer to sdcard and boot with volume button down.. is it same for stock roms?(just rename it to kovsimg.nbh) where to find stock roms? when i install stock rom, will i still have olinex hard spl?
Click to expand...
Click to collapse
0.72 = v1.0
install stock rom = install custom rom
find stock roms either through reference thread in rom dev or here
hspl will not be removed as long as you don't flash back to stock spl
Best, DK
so, if i understood you, with mine 0.72 i can install stock and custom rom?
and you with 1.0 can install just custom?
and also, if i install stock rom, i install it the same way like custom one? (tranfer kovsimg.nbh to root of memory card and enter bootloader)
and if i install the stock rom like that, can i then install again custom one, i meen will my hard spl will delete or it's on the special memory of the phone? that i can't change with rom installations? thank you
milancex said:
so, if i understood you, with mine 0.72 i can install stock and custom rom?
and you with 1.0 can install just custom?
and also, if i install stock rom, i install it the same way like custom one? (tranfer kovsimg.nbh to root of memory card and enter bootloader)
and if i install the stock rom like that, can i then install again custom one, i meen will my hard spl will delete or it's on the special memory of the phone? that i can't change with rom installations? thank you
Click to expand...
Click to collapse
correct
wrong, what I label as v1.0 is exactly the 0.72 that everyone uses
correct, you install stock like custom roms, either using sd or ruu methods
installing stock rom does not overwrite your hspl, so after stock you can flash custom roms right away, roms do not affect the spl as you said
Best,
DK