Cracked Screen - Tilt, TyTN II, MDA Vario III General

Sorry to post something that doesn't add value, but I am in need of some help.
I cracked the screen on my tilt. The screen still works fine, but the digitizer barely registers and so I need a new screen.
Should I pay the some odd $150 to send my phone in for repair, or is there a better way? I've looked through some posts where some people have repaired it themselves, but the tutorials make me think that this is not for me. I would be willing to pay someone to do it, and am hoping that someone knows a place cheaper than the $150.
Thanks

buddy go one ebay buy the screen for 40$ and isntall it urself, i did it and the phone looks brand new

How hard was it, it looked like it need to be torn apart.

yea u pretty much have to dismantle the whole thing to get to the screen, but its really easy pm me ur email i'll send u the HTC KAISER SERVICE MANUAL

Thank you.
I have the service manual. I just don't have all of the tools, or time at the moment.

You can buy a package deal on ebay that includes the tools, the screen and the digitizer.
The manual is pretty self explanatory!
Good luck!

Related

Moving couch = Broken Tilt

I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
well i don't know if warranty will cover it or not but you are still under your one year warranty so you could try to get a replacement. Its hard to say what could be causing it. You can check out mike channon's articles on disassembling a kaiser.
Good luck.
brianlb said:
I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
Click to expand...
Click to collapse
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
pyraxiate said:
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
Click to expand...
Click to collapse
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
I did a screen replacement on a Wizard, and it wasn't that difficult. just make sure you don't break anything while trying to pry small pieces off to get to the screen.
Stu_Can_Sam said:
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
Click to expand...
Click to collapse
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
brianlb said:
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
Click to expand...
Click to collapse
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
pyraxiate said:
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
Click to expand...
Click to collapse
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
brianlb said:
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
Click to expand...
Click to collapse
Let us know how it goes
Glad I could help
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
congratulations!
good to hear you've achieved a successful repair!
correct me if i'm wrong...are you saying that the two halves of the phone (screen and keyboard) don't align properly when the keyboard is closed? if so, i remember a thread in this section of the kaiser forums that details (with pictures) how to possibly fix that particular problem!!!
"search and ye shall foundeth it !!!"
brianlb said:
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
Click to expand...
Click to collapse
Im glad i could help Im also glad to hear the phone is up and running again
As was stated before, there is a thread for the case not aligning. I did some quick looking but to no avail. If i come across it ill be sure to post it
I'm not sure if I'm explaining it correctly. But it's basically the outer case, and around the power button it's not flush. Not sure if you can tell from my pics. I tried also doing a search w/no luck. I'm sure there is some specific name or something other than case that it's under.
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
DemoShadow said:
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
Click to expand...
Click to collapse
I tried that, and it doesn't seem to pop in at all.
I think its just like DemoShadow said. I dropped mine once and it seems to be a similar issue. I also just pushed really hard to get it to pop back in. I think its just that clip isnt in place as it should be when it was put back together. If anything, try to take it apart and put it back together
kristoff_sz said:
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
Click to expand...
Click to collapse
how did you put the keyboard back on????????????????
Can you be more specific?
Hey,
I literally just replaced the screen on my backup Tilt last night. Still got most of it in my head.
What, exactly, do you mean about putting the keyboard back on? Got any pics of where you are now?
This was one of the easiest things I've had to do...asside from it being somewhat tedious. Most of my issues were resolved by MAGNIFICATION! Once I could see what I was doing, there were almost no issues.
I only paid $31.99 on eBay for a screen with free shipping (from USA no less)...less than the $35 I would have had to pay with the insurance through my Provider Dealer...and I didn't have to wait for 3-5 weeks to get it back.
I'd do this for people with broken screens as a service, but I can't guarantee the cost of the screen...it goes up and down too much.
If you can be real descriptive, or have pictures, I'm pretty sure I can help get you back together.
Let me know, I'll keep an eye on this thread...
RAF
here's some dismantling guides
http://www.mikechannon.net/page1.html
you dont have to remove the keyboard to replace the LCD, unless u're talking about the outer keypad, which just sits in its spot

Cracked Screen

Hey,
Just looking for some advice where I should go for a cheap solution on how to fix my phone. Basically, everything still works great! Apart from the big crack, the screen doesn't seem to have been damaged (eg. All the pixels look fine, touch still works, only glass/plastic panel is cracked)
I'm actually really impressed by how it took such a hard hit and the device works fine, the screen didn't even smash! Basically it nudged in between my car seat where you close the door, didn't realise it fell out my pocket and closed the door (you could imagine it would be a hard hit) and the phone lives.
If I just needed the glass replaced, can it be done DIY? Or should I not bother and give it to a service centre? I got it from 3 but I know they'll probably overcharge me for something like this..
Any suggestions welcome, thanks!
if the damage is only to the exterior screen then you may want to consider getting this:
http://www.mobilefun.co.uk/product/17042.htm
be carful! the screen from my firlfreidns diamond is broken too and I had ordered one of those touchscreens... but the screen which comes has no "window" for the frontcamera and after disassembling the phone I saw that it is NOT POSSIBLE to remove the touchscreenglas from the frame.
Replacement LCD & Digitiser
I recently replaced an lcd and digitiser on a HTC Touch Diamond. I bought the complete screen (lcd & digitiser) as one pre-assembled unit from a guy on Ebay (£34.99). Fits straight into the front of the unit frame. I don't think you can remove just the digitiser because it is stuck onto the LCD, and the LCD itself is very fragile. Disassembly is fairly straight forward if you've got the right tools.
Thanks for all your help guys! I've just been bogged down with work so havn't been able to get back here for awhile.
I've taken some time to look into the webiste and others, decided to just order it off ebay in the end anyways. However, taking note from the previous 2 posts, would I be wasting my time ordering just the digitiser itself? I would assume that's what HerrVorragend also meant by "that it is NOT POSSIBLE to remove the touchscreenglas from the frame."
If so, why do they bother selling them online separately? I guess I won't really find an answer, just seems stupid to me. Anyways, guess I'm stuck purchasing both LCD + Digitiser but as a final question, does anyone have any guidelines as how I should replace this myself? I'm very paranoid about this sort of thing because it's only 1 month old, however, I have also replaced an LCD on my old Nokia 6280 before using a step-by-step picture guide online.
Don't think I'd have much luck finding one for this model, hey.. haha.
Once again, thanks!
Double posted, sorry.
badtzmaru56 said:
If so, why do they bother selling them online separately? I guess I won't really find an answer, just seems stupid to me. Anyways, guess I'm stuck purchasing both LCD + Digitiser but as a final question, does anyone have any guidelines as how I should replace this myself? I'm very paranoid about this sort of thing because it's only 1 month old, however, I have also replaced an LCD on my old Nokia 6280 before using a step-by-step picture guide online.
Don't think I'd have much luck finding one for this model, hey.. haha.
Once again, thanks!
Click to expand...
Click to collapse
If you google for HTC Diamond Service Manual, that will help greatly with assembly and disassembly - there are also a couple of videos on Youtube. From my experience the most tricky part is re-connecting the two flex connectors when you re-install the main board. I use the back of a pair of tweezers to slide underneath the connector carefully. If you are nervous about doing it and happy to cover postage costs, I can replace the LCD for you - PM me for details and I'll see what i can do.
Andy

Cracked Screen Repair?

Edited:
I'm getting the phone repaired through Clean Planet Repair (iphonerepair.com).
I had some problems with them the first time I sent it in, but the manager(?) contacted me and we came to a pretty reasonable solution.
That repairs in progress, so, if your HD7 is cracked there's a place that will have done at least *one* HD7 repair there...
anwei40 said:
Anyone know where to get this done?
I bought a cracked HD7 and can't find anyone who actually knows how to fix it.
Note:
I bought the phone because "Clean Planet Repair" at iphonerepair.com advertised a $99.99 repair and that seemed like a good deal. I mailed the phone there and they called me to say there was a 50-50 chance they'd break the LCD and I'd have to pay an extra $100 to have that fixed (part + labor) as well. They seemed annoyed that I had a problem with this.
On the site you read these great testimonials like "Trust this place, they stand by their promise." Quite a business model. I would not recommend them.
Click to expand...
Click to collapse
$100 to fix a screen (replace it) is a good deal, please get it done, as HTC will charge u more for sure..
I'm sure its the same deal as the hd2, you can replace just the lcd, but usually will damage the digitizer in the process so it's easier to replace both pieces together.
Good Luck
Post removed; update in first post.
ugh. This is what I'm most worried about happening to mine. I wish it was made of gorilla glass. Maybe I should have gotten the protection plan after all..
How do you guys crack your screen so fast? i had the HD2 since March and never even got a scratch, never used a case just put it in my pocket always... even droped it twice..
My hd7 is still flawless with no case..

[Q] Broke my phone's screen

I dropped my phone on some pretty hard stuff, and it has a big crack now, on the right side of the screen. Everything seems to be working fine, and the touch screen in itself has no issues (it works even on the cracked part of the glass), but the crack is pretty big, and it runs right from top to the bottom of the screen. Any idea how/where I can get it replaced, and how much it might cost?
I though gorilla glass was a lot more tougher :crying:
Thanks!
If you are game enough to do it yourself
http://www.youtube.com/watch?v=cTOyjGol_iM
There are a few screens on ebay for cheap
Can you get it done cheap in a market or something? You can here
Oh, well. Seems like fun!
Did not find anything for the IncS on EBay's Indian site, but I guess I can get it shipped from the States - I found several on that.
But before I try this, I would definitely want to know how much the HTC repair center might charge me for this The LCD is fine, and only the glass (or digitizer - I got that from Mark's youtube link) has to be replaced. There are several on eBay for 35 USD, which is kinda OK, but I do not want to end up with a messed up non-working phone at the end of it
There may be a few nerves taking apart a $400 phone haha
And from my research, the glass and the digitaliser are attached
You could always enquire at HTC by calling them or emailing
That would obviously be the safest way
Sent from my Incredible S using XDA
Yeah, I mailed them, and they asked me to contact their Customer Care over phone, and the person at the CC had no idea what a digitizer is, and he asked me to get in touch with the repair center here, which is closed on Sundays
Will update here tomorrow after a visit to the repair center.
Sent from my (broken) HTC Incredible S using xda app-developers app :'(

[Q] crack in digitizer what to do?

hi all,
i got a bargin latly and have now got a note but the main donside to this is that is has a chip/crack on the edge of the screen near the menu button.
i need to know anyone oppinion if i can get away with just repacing the digitizer or wil i have to repace the full lcd aswell, im really low on cash now but iv been checking ebay and heres what i found
digitizer - £8.95/$13.89
http://www.ebay.co.uk/itm/Front-White-Digitizer-lens-Glass-Screen-For-Samsung-Galaxy-Note-i9220-N7000-/300733099033?pt=LH_DefaultDomain_0&hash=item460516ec19
full lcd + digitizer - £118.04/$138.24
http://www.ebay.co.uk/itm/LCD-Touch-Digitizer-Screen-for-Samsung-Galaxy-Note-GT-N7000-i9220-white-/221002976265?pt=LH_DefaultDomain_0&hash=item3374cdcc09
iv added the pics bellow and would love feedback to see what is the best situation for me. my so called local samsung repair centre who carnt even fix phones propperly (feedback from alot of people with broken screens) said that i have to replace it all and they quoted me £180.
please let me know guys
Ive seen worse
A simple digitizer replacement should suffice, theres numerous how to videos on you tube.
Just take your time and do not rush it, Also, Dont skimp on the price, If you get a cheap aftermarket digitizer, the performance might not be as good as a genuine one.
Finally, once you get it fixed, There is an app that can tune the sensitivity so you can get it perfect I think its called screentuner im not sure, google it !
azzledazzle said:
Ive seen worse
A simple digitizer replacement should suffice, theres numerous how to videos on you tube.
Just take your time and do not rush it, Also, Dont skimp on the price, If you get a cheap aftermarket digitizer, the performance might not be as good as a genuine one.
Finally, once you get it fixed, There is an app that can tune the sensitivity so you can get it perfect I think its called screentuner im not sure, google it !
Click to expand...
Click to collapse
thanks man really appreciate your help i didnt realise if i got a cheaper one would make it work crap. how much would you say to speand roughly?
btw i kno it isnt the worst but i ike my phone to be in mint condition especialy as i get bored very easy then it ends up in the mp withing 2 months lol
im not saying buy a really expensive one and get ripped off, I just mean dont buy one made from cheap parts, Like a chinese one.
If you could afford it, Buy genuine, If you cant, buy a recommended one, Check the sellers feedback and scour the internet for recommendations, There may even be some in the accessories section
EDIT: Im unsure whether the amoled screen is an all in one screen, Meaning the screen also recognises the touch and there is no digitizer, Does your phone respond to touch ?
Look at this i found on ebay - http://www.ebay.co.uk/itm/Outer-Len...arts_Tools&hash=item20c7b38727#ht_2782wt_1037 It is just the outer glass screen, So if you get this, It wont affect the touch response :good:
I understand that it would affect the sale price, but be careful as I've found the most difficult thing to do is to separate the digitizer from the LCD screen without patience. The safest route would be to get the Digitizer + LCD costs, but ofc it costs ridiculously higher than just the digitizer.
For howto videos, search for "Galaxy Note Disassembly" on YouTube.
Yeah +1
Upon some more searching it seems like a really tricky job, Some say impossible, The choice is yours really, Try it and hopefully save your self some money, Or take the hit and get the whole package - Screen, Glass, digitizer ect.
You could also look at some sort of glass crack repair kit, Like they do on car windscreens, Its only a little crack where the soft keys are so its not disrupting the view of the screen, And it might just save some £££ and a lot of hassle too
again thanks guys,
the thing is all aspects of the screen are fully functioning. it did get it at a very good price i will admit it was cheap but it was only because it was too big for the women who had it previous and cex offered her £190 but wouldnt take it because o the crack!
im all for making sure my device look good i know you can say it doesnt ook bad but its just if it was cheap enough to fix i will do it. or if i end up putting it in the MP in a few weeks when i bored it can either buy and throw in the digitizer or the full pakage.
over than that this is why i posted iv never dont it before and iv sceen my mate do his galaxy s1 but thats it lol

Categories

Resources