Hi All
Can someone help me to upgrade my original Rom, each time I wanted to do it I got this error : error 294 I guess that is related to the operator, my question is : what's the solution to resolve that ?
Thank you
bcbgtn said:
Hi All
Can someone help me to upgrade my original Rom, each time I wanted to do it I got this error : error 294 I guess that is related to the operator, my question is : what's the solution to resolve that ?
Thank you
Click to expand...
Click to collapse
Have you flashed HSPL before flashing the rom???
Take a look here:
http://forum.xda-developers.com/showthread.php?t=431217
Related
Hi There !!
When i doing upgrade for my imate PDA2K i have this message ( ERROR 144 : RADIO ROM UPDATE ERROR ) all time when i try again with all roms ( old & new & QTEK 9090 ) i have same problem .
plz plz plz help me
Hi all !
Pls, help !
I have the same problem.
When i doing upgrade with offical i-mate_PDA2k_WWE_12200_162_10600_SHIP for my iMate PDA2K (v. 2.06), i have message ( ERROR 114 : RADIO ROM UPDATE ERROR ) all time. And I can't start GetDeviceData (
did you find the solution
Does anyone knows the solution for error 114
Re: did you find the solution
I HAVE TWO O2 NOW
WITH ERROR 114
RADIO
NO SOLUTION
Check boot loader
i have both 1.03
Error 114: radio rom update error
No solution, mainboard replacement is the answer I reckon.
I have exprienced this problem before and all is not lost...
If you are upgrading to a ROM designed for another device/phone network, you will have to follow a set of instructions in order to fix your problems. Go to the wiki pages of this site (http://wiki.xda-developers.com) and follow the links for the blue angel.
If you are upgrading to a ROM designed for your device, after trying to use a ROM from anotherr device, then you will get errors like this as your previous upgrade has possibly changed your country code or Language ID. Again, follow the instructions on the wiki pages of this site (http://wiki.xda-developers.com) and follow the links for the blue angel.
Only after reading the wiki pages, PM me for some more advanced help.
Regards,
Dom
Hallow every body
when I was upgrading my mobile the following error has occurred ERR : 114 RADIO ROM UPDATE ERR
before I wright this message, I've looked for a solution for this problem
but I sow the problem without solution
I hope that anyone help me
and thank you very much
, HEY GUYS ! HELP ME PLS
I HAVE 1 TRIN100 , IT IS CHINESE VERSION ,
I WANT TO UPROOM TO WWW VERSION , BUT ...
error 302 - WHY ?
sos
Enchanter said:
, HEY GUYS ! HELP ME PLS
I HAVE 1 TRIN100 , IT IS CHINESE VERSION ,
I WANT TO UPROOM TO WWW VERSION , BUT ...
error 302 - WHY ?
sos
Click to expand...
Click to collapse
Here's a quote from the ReadMe inside the RUU Upgrade Utility:
-> ERROR [302~318] : UPDATE ERROR
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
Click to expand...
Click to collapse
Have you upgraded to HardSPL?
Visit http://trinityguides.info for guidance.
pls help me man !
error 302 happend when i try to upgraded to HardSPL .
0% ..then suudenly error 302 like this ..
~>~ i dont know why
my first time with TRinity , ..but so so hard
hi,
after flashing the new O2 rom the hspl-flash-tool (1.56.OliNex) breaks up with the message "update error".
it seems that the new rom locket it.
is there any solution to unlock it?
thx
Katana1234 said:
any solution
Click to expand...
Click to collapse
look here: [USPL] - Blackstone USPL, or how to keep your stock SPL and flash cooked ROMs
Please post rom flashing problems in the Dummies Guide to flashing thread.
There are a few different Update Error codes though. Did you get a number with the error eg 262 or 280 as they mean different things
starbase64 said:
look here: [USPL] - Blackstone USPL, or how to keep your stock SPL and flash cooked ROMs
Click to expand...
Click to collapse
ClydeB1 said:
Please post rom flashing problems in the Dummies Guide to flashing thread.
There are a few different Update Error codes though. Did you get a number with the error eg 262 or 280 as they mean different things
Click to expand...
Click to collapse
thx 4 ur fast answers. i don't want to get a uspl, my prob is that i can't flash any other spl anymore.
after trying out a new 6.5, i had to reflash it because of an green-screen problem.
and since i flashed the new O2 version 1.57.207.1 im not able to flash any spl or rom. the only error i see is "update error" which seems to be a lock problem...
Katana1234 said:
thx 4 ur fast answers. i don't want to get a uspl, my prob is that i can't flash any other spl anymore.
after trying out a new 6.5, i had to reflash it because of an green-screen problem.
and since i flashed the new O2 version 1.57.207.1 im not able to flash any spl or rom. the only error i see is "update error" which seems to be a lock problem...
Click to expand...
Click to collapse
As I asked earlier? What is the number of the error you get as there are different meanings to each one of these?
Also, the mods will close this thread down, so please take any other questions to the Dummies Guide thread.
ClydeB1 said:
As I asked earlier? What is the number of the error you get as there are different meanings to each one of these?
Also, the mods will close this thread down, so please take any other questions to the Dummies Guide thread.
Click to expand...
Click to collapse
------------------------------------------------------------------------
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
------------------------------------------------------------------------
btw: soft reset didn't help
Please post in dummies guide thread. No need for another thread
Thread closed
please help me to flash rom always stack on 13%..
please help me..
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
ferdiebaq said:
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
Click to expand...
Click to collapse
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
jheizee said:
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
Click to expand...
Click to collapse
I have the same problem
but can't instal bootloader or flash any ROM
I tryed to flash the original rom but it stucks to 13%
I tryed to instal many bootloaders but when it cames to 100% it says that image is corruped (error 270)
can any one help me ??
up guys.. please i really need your help..
i want my trinity back..
OK. I've had that problem before when I first got my Trinity. Been through a lot of trial and errors before I was able to do it correctly. I don't know if this can help but this is how I did it. Usual warning.... I am not responsible if you brick your device.
Just look for the following files in the Trinity thread and install them in the following order:
1. HTC Trinity SIM & CID Unlock - v1
2. Install Olipro 1.20
3. Now I don't know if this should be done but I read somewhere that you should upgrade your Radio version so I installed "Trinity_Radio1.56.70.11"
Even though I have done these steps already I always do them again WHENEVER I install a new ROM. It does not hurt to repeat them.
If you are getting "error vender id" message then it means that your unit is locked again so you have to unlock it again like I said in my previous post. You must have installed an official ROM previously which will lock your phone again.
please help me to get my trinity back
i think that my phone has been locked because i can't instal any ROM or HardSPL
I tryed to flash windows d. 3.3 Dmore (wm 6.1) but when i boot windows it stucks in the green screen so i can't run cid unlock.
i cant send the phone for servise because i get it from a friend and i havent the receipt
please help me to get my trinity back
thanks guys.. my trinity is alive again.. hehehe
i just remove the radio.nb and its continue upgrading..
but the problem im facin now is everytime i flash radio its always stuck at 0%..
i think my radio bootloader is damage?..
any idea?
any have a schematic of radio ic? where i can find it? how does it looklike?
try to use SSPL, after flash official ROM and then try again from beginning
maybe can help...