Hi Super Developers, I have a problem when I try to upgrade my Wizard through the exec file ROMUpdateUtility MFC which crash with Windows Vista Enterprise, the error (windows popup): "ROMUpdateUtility MFC Application has stopped working", I did try to set the compatibility running like Windows XP or Windows 2000, but this error still occurs.
Please could you give me some advice about it.
Thanks a lot, Ulises.
Same problem
I know this is an old thread, and I know it's now 2011... But I'm trying to experiment with an htc i just found. Both the button_rom and the alternate rom tool crash as soon as it puts the phone in RUU mode. Every single time. Any suggestions?
Related
I have a qtek9090 and it will not boot up, it says "Serial and v2.06". When I place it in the cradle, it changes to USB. I cannot boot it, I can't upgrade it ( connection error). What an I missing?
Re: Help Please, BlueAngel not booting up, not able to upgra
todixy said:
I have a qtek9090 and it will not boot up, it says "Serial and v2.06". When I place it in the cradle, it changes to USB. I cannot boot it, I can't upgrade it ( connection error). What an I missing?
Click to expand...
Click to collapse
Do you have activesync 4.1 installed?
And beware that windows firewall may cause some problems too.. so turn it off before you start upgrading just to be sure.
one lesson learned from upgrading smartphones is to disable activesync:
task manager> end process wcescomm.exe and all ms office
>>disable anti virus and fire wall which also means disconnecting from the net. then try if flash is succesful
xykosomatik said:
one lesson learned from upgrading smartphones is to disable activesync:
task manager> end process wcescomm.exe and all ms office
>>disable anti virus and fire wall which also means disconnecting from the net. then try if flash is succesful
Click to expand...
Click to collapse
I remember closing those processes when I made my first flash... but look at the wiki from TuMa 1.2 for example:
"Flash the ROM.
* If your device is not recognized, make sure you use a fresh Windows XP SP2 or Windows 2000 SP4 installation with Active Sync 4.1."
But it's also true that it may not apply in this case. Anyway.. just trying to help.
Hello guys,
Anyone running Win7 beta? I tried both 32 and 64-bit and I cannot synchronize... I always get an error, but Windows will not give me any details on it -or an error code to go on with. I have tried uninstalling and reinstalling the device, but haven't succeeded...
Any help much appreciated!
T
Download Windows mobile device center for vista on the microsoft site
Works for me
Good luck
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
2323
That's what I'm running - in fact, Win7 downloads it automatically.
Here's what I'm getting:
Hi, I had kinda same problem. I got a message in windows help, saying that i had to start command in "admin mode", and then type:
reg delete HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions /va /f
When I did that, and started Win Mobile Device Center all worked perfect..
I uninstalled Windows Mobile Device Centre and then installed the downloaded one and works a treat now.
Remember guys Win7 is beta so share your findings with Microsoft
i can connect with bluetooth but not usb in win7, but i still sync with vista.
Increator said:
Hi, I had kinda same problem. I got a message in windows help, saying that i had to start command in "admin mode", and then type:
reg delete HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions /va /f
When I did that, and started Win Mobile Device Center all worked perfect..
Click to expand...
Click to collapse
Hm, thanks for the tip... I googled it and it seems a catch-all fix of some sorts.
In my case, the suggested key was empty. So, you can guess, it didn't work
Thanks nevertheless!
Guys, thanks for the info above, saved me a pile of time!
So... am I the only one? With two different installations of Win7 and two different ROMs it surely sounds strange...
had the same problems with win7
..then i unchecked the "faster synchronisation" option in diamonds "USB to PC " setting.
(The checkbox below "acitive sync synchronisation with outlook")
I´m using the german ROM, so the menu description might sound slightly different to what i posted ;-)
I always have this off, since it has never worked for me on any machine (either for my previous TyTNII or the Diamond). So It's been unchecked the whole time. The problem is that ActiveSync DOES recognize the device, it initiates the sync procedure and then craps out
strange
..i´m running win7 on 2 machines and the active sync stuff works without problems..
running latest udK Syrius GER ROM
Hello,
I have already moved to Windows 7, which is very stable and much faster then Windows Vista...
There are some problems with the Windows 7 and USPL...
Is there a configuration guide, which explains the procedure, how I can manage the USB connection problems within Windows 7.
Many Thanks
Roman
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
One thing to note, you have to put your phone in bootloader and connect it via USB for it to show the Mobile Device - HTC USB in Device Manager.
One laptop I was on I knew I had to apply the fix on so hadn't tried without updating, and took me forever to find out why I couldn't find the driver to update.
I used a small program called "Driver Signature Enforcement Overrider 1.3b".
Its freeware for using unsigned drivers in Windows 7.
I'm using Windows 7 x64 and USPL works perfect now.
Thanks
standish said:
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
Click to expand...
Click to collapse
Hello,
Had to upgrade my Windows 7 to build 7077 first....!
Then it worked @ 1st try... ;-)
Roman
I have problem with installing driver on Windows 7 64-bit (build 7077). I always get error: This device cannot start (Code 10). Does anyone have solution for it?
I had to get to 7077 as well, i couldnt make it start on 7057 or 7068 either.
I just solved it, but I can't explained how... I tried it again and again.. did some restart of HD and of Windows 7 and finally I was successfull . My tip is to re-connect HD on USB before installation...
I use 7077 x64 and no issues with it whatsoever. I had no issues at all with any build and actually it gets the drivers and Windows Mobile Device Center automatically for me. Check your system drivers like chipset and usb controller for updated versions maybe?
Thanks
Many thanks for the solution that you give to us.
I have been testing every release of Windows 7 since 7000 and as long as you install WMDC (Windows Mobile Device Center 6.1) and then update the HTC USB Sync driver (put your phone into bootloader and update the driver in device manager with the one from the guide in my signature) you won't have any issues flashing roms. This is for both 32 and 64-bit versions of Windows 7.
When i try and do the flash. It come up with an error
Code:
\\.\ WCEUSBSH001 port can not open
.
PC OS: Win Vista sp2 (64X) help please
Huh
Can you search please, there are other threads that talk about the Ipaq.
Closing this thread.
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
en_ky said:
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
Click to expand...
Click to collapse
Hi en_ky!
I was following the other installation method "Installing Windows XP with Windows Post Install (WPI)" that you can find on this forum, but basically should be the same.
Anyway, regarding WLAN on the WPI method it says:
"13. WLAN: Drivers are copied to c:\wlandrivers, install from there when you are asked for them later". This step is just before installing CYGWIN
After finishing with SwapResolution,
"Now it usually asks about the WLAN drivers, see step nr. 13."
"If it asks about drivers for Windows Mobile, just answer yes until it finishes."
"To get Wifi working, you have to copy the "copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot."
"DO THIS IN SAFE MODE ONLY. This is how I got mine to work. I had the same problem with the yellow and not working wifi code 10 in the device manager."
"If you copy this without being in safe mode, it will not work because after the reboot the system will replace the overridden version with the old one again."
So check again all the steps and do the last one in Safe Mode (I think here is your problem)!
Good luck!
thank you for your reply,
I tried to resolve my problem with help of windows update and an eterneth connection for internet. At first it doesn't start with the same yellow ! But after a restart, it starts!!!!
Many thanks to you in any case; i know that your answer will be usefull for another person with this problem!