Database Develop

Major SD Card problem..

ok ive had my 256mb, 512mb and 1gig sd card working fine on my BA until recently..now im running into the following problems:
1. all the cards are recognised on the BA, but i'm prompted with this "Do you want to format this storage card to make it readable". Following the successful format, neither system nor applications like Resco or SKTools see the Storage Card.
2. I've formatted using both Fat16 and Fat32 on pc but again when inserting the cards into the BA i get the same "Do you want to format this storage card to make it readable". After formatting, the same result as no.1.
3. Ive read that un-checking "Enable advanced network functionality" would help. Have tried this and soft-reset with the same problem.
4. After formatting a card in the BA and then sticking it into the card reader on my desktop...the pc doesnt recognise it and prompts to format it. So this keeps going round and round with both pc and BA prompting to format before use. However the pc recognises the cards after formatting them.
5. After the BA formats any of these cards..I soft reset..but then it prompts to format again after the soft-reset.
6. Tried using StorageTools but it never recognises any of the cards when inserted..even after the BA has recognised it and apparently successfully formatted it.
7. Finally tried a hard-reset and restored my backup but still none of the SD cards are recognised.
Now it seems maybe a system problem or possibly a hardware fault..but the cards do initially get recognised when inserted into the BA but its after the BA formats it that nothing appears.
Have had a search in these forums...tried chkdsk on all cards without errors..but I'm still stuck..hope someone out there can help. Thanks in advance.

definately some hardware problem in BA.
i have a broken WIFI chip.
welcome to the club.

SD Card Problem - QTEK9090
I have the same problem with my 2Gb Storage card. I have updated my QTEK9090 to WM6.0 and after the update my storage has the same problem.
Im trying to find some patch or upgrade to this problem.

Try this
After some times, ived already had such problems like yours, and i think ived already fix it, ahm try to install wm5storage on your device,then activate it,, then connect to the PC, IT will,promt as removable disc,, just format the SDcard, then try to restart it,, im n0t sure if it would work on You BA coz ive done it on My HIMALAYA, but again its worth of trying,,

bukwit said:
ok ive had my 256mb, 512mb and 1gig sd card working fine on my BA until recently..now im running into the following problems:
1. all the cards are recognised on the BA, but i'm prompted with this "Do you want to format this storage card to make it readable". Following the successful format, neither system nor applications like Resco or SKTools see the Storage Card.
2. I've formatted using both Fat16 and Fat32 on pc but again when inserting the cards into the BA i get the same "Do you want to format this storage card to make it readable". After formatting, the same result as no.1.
3. Ive read that un-checking "Enable advanced network functionality" would help. Have tried this and soft-reset with the same problem.
4. After formatting a card in the BA and then sticking it into the card reader on my desktop...the pc doesnt recognise it and prompts to format it. So this keeps going round and round with both pc and BA prompting to format before use. However the pc recognises the cards after formatting them.
5. After the BA formats any of these cards..I soft reset..but then it prompts to format again after the soft-reset.
6. Tried using StorageTools but it never recognises any of the cards when inserted..even after the BA has recognised it and apparently successfully formatted it.
7. Finally tried a hard-reset and restored my backup but still none of the SD cards are recognised.
Now it seems maybe a system problem or possibly a hardware fault..but the cards do initially get recognised when inserted into the BA but its after the BA formats it that nothing appears.
Have had a search in these forums...tried chkdsk on all cards without errors..but I'm still stuck..hope someone out there can help. Thanks in advance.
Click to expand...
Click to collapse
Well, you've already tried different STORAGE CARDS and same thing happens right? You've already tried reformatting it using your PC and also with your BA and same thing happens right? You did a hard reset and samething...definitely a hardware problem. But before this, what happened? Before your BA stops reading your storage cards, what happened?

WM6 Rom Upgrade

After browsing through the forum I see that the "leaked" WM6 Rom for the 750 can be installed with a SD card, and the Official Release (Vodafone) has its own "installer" package that can be installed with the USB Cable. I just received my 750 Today from the Premiere site, and did not get my miniSD card yet. Is there a way to install the CHEEIMG.nbh without using a miniSD card and using the USB cable? Thanks in advance...

minisd is missing after upgrade

I've spend a lot of time to fix my problem but no success
I upgrade my treo 750 with french rom and it is ok but still 1.16 instead 2.23
What is very ennoying me is that the treo do not recognize any minisd (microsd in a adaptatoneither a 1giga or 2giga)
Please help me
tks in advance

You might have a faulty device or a bad memory card. Try to format the memory card on your PC to FAT16 or FAT32 and see if that helps.

tks a lot
but formatting do not work
so back to the shop

how I upgrad my k-jam by sd card

is there any way to upgrad my K-jam by useing the sd card as some other devices like jas jam by renameing the rom file and save it on the card
I mean to flash with out cable just by the card
my device dos't make any connection with the computer so I use the cable only to charg the battery

No, htc devices doesn't use that method.
SD method in htc is only suitable for unlocked G3 wizard, and the SD image can only be generated from a working unlocked G3 wizard, you can't generate the image from ROM file.

I did that but in other way I could to copy the new rom from other k-jam device to my sd card then i put the card in my device
but now I haven't an other k-jam device I only have the one how has a problem in usb
by the way I unlocked my device and it 3g

help me pls..about X1 Flash with Storage Card

my X1 already flash Hard SPL V1.00
now SPL version is SPL-0.72.01iNex
i copy there image files with name Kovsimg.nbh
but then i wan to flash
i show no image files...
can some ppl help solution ? thank~~

should do it
Are you sure you put the kovsimg file in the root of your storage card?
Then hold down volume button down and poweron until the rainbow colors shows?

Are you using a Kingston (or other brand) microSD card?
You need a SanDisk microSD card.

I try change memory card ~~ thnak
wait for respone

SAME ....I CHANGE 2~3 DIFREEN MEMORY
SAME AS NO IMAGE FILES~~

maby is rom problem? i download from here http://forum.xda-developers.com/showthread.php?t=475482&page=3