After browsing through the forum I see that the "leaked" WM6 Rom for the 750 can be installed with a SD card, and the Official Release (Vodafone) has its own "installer" package that can be installed with the USB Cable. I just received my 750 Today from the Premiere site, and did not get my miniSD card yet. Is there a way to install the CHEEIMG.nbh without using a miniSD card and using the USB cable? Thanks in advance...
Related
Hello
I bought few days ago a 8gb micro sd card for my p3600.
I'm using an micro to mini adapter from kingston.
If I put the card in the device it says to me that there is only a 4gb card avalible.
Yes I used the search function but I didn't find anything that helps me.
I don't want to update to wm6
I hope smeone can help me
Thank you
olum
olum said:
Hello
I bought few days ago a 8gb micro sd card for my p3600.
I'm using an micro to mini adapter from kingston.
If I put the card in the device it says to me that there is only a 4gb card avalible.
Yes I used the search function but I didn't find anything that helps me.
I don't want to update to wm6
I hope smeone can help me
Thank you
olum
Click to expand...
Click to collapse
Who's the maker of the card?
olum said:
Hello
I bought few days ago a 8gb micro sd card for my p3600.
I'm using an micro to mini adapter from kingston.
If I put the card in the device it says to me that there is only a 4gb card avalible.
Yes I used the search function but I didn't find anything that helps me.
I don't want to update to wm6
I hope smeone can help me
Thank you
olum
Click to expand...
Click to collapse
Sorry but as far as I know you will have to update to WM6 to get this to work correctly!
8GB SDHC
Does 8GB Micro SDHC cards work on this phone? Is this SanDisk cards? Are there any requirements to the micro to mini SD adapter?
Does anyone know if trinity with wm5 supports 6/8 gb sdhc cards?? I have read the last coment about it's necesary to upgrade to wm6 to use these cards, but i don't know if there are any fix to support them on wm5.
I know there are a fix called sdhc.cab (or something like that), but i'm not sure if with that fix wm5&Trinity will works fine with any sdhc cards.
(by the way, i don't want to upgrade by trinitry because it's really working fine under this wm5 (including gps) and also i know that i will lose my guaranty if i upgrade it).
Any help would be appreciate. Thanks
I am also experiencing the same problem... I already tried upgrading my P3600 to WM6 (by the way working very well) and the HDSD drivers available through this site with no success. Is there any other solution to this problem?...
Hi Guys,
I have Trinity with Shaps 6.30 (THX alot for this great ROM!!)
without any patch and hokus-pocus, and my 8GB Sandisk SDHC
worked out of the box...
Showing something about 7.7 GB (rest is used by sytem/formatting)
But ins dev. and Hack, is a tool posted 4 all non Shaps (l)user's
and plz use the search function...here what i get in 10sec:
http://forum.xda-developers.com/showthread.php?t=344338 ---> "SDHC card patch WM5 and WM6" working<----
hope helped u
mastah
mastah said:
I have Trinity with Shaps 6.30 (THX alot for this great ROM!!)
without any patch and hokus-pocus, and my 8GB Sandisk SDHC
worked out of the box...
Click to expand...
Click to collapse
Hi Mastah,
Is there a thread for this ROM? I can't find it anywhere....
Mattster
I've managed to see all the 8gb of a Kingston microSD (+ adapter, of course) in my WM5 (original rom) Trinity.
See:
http://forum.xda-developers.com/showthread.php?p=4415582#post4415582
yesterday I came across a page which gave two methods to upgrade a treo 750 (or similar from memory) rom, one method was using a sd card and the other was using the computer in some way, I unfortunately cannot now find that page again
currently running Cingular WM5 I'm trying to upgrade to WM6 vodafone, sim is locked (was planning to unlock after upgrade (bad idea?))
in my searches I came across XDAtools but that does not seem to work for me (says something about cannot establish a serial connection) and the built in installer in the exe will not work
I only have a 4gig SDHC card so do not believe I would be able to upgrade
using the sd card method (though have not tried)
mostly I am hoping someone here knows of the page, it talks about two methods
it was probably on XDA and probably the wiki, maybe the forum, though its possible it was on a treo forum, I cannot access the computer I used
alternatively if you know of other ways to upgrade using the usb cable that information would be much appreciated
lastly if this question has been asked again and again and again I am sorry, my searches of this forum and the wiki have not turned up what I am looking for as far as I can find
SD Update
You need to have a miniSD card formatted FAT32 and the card must not be HC. Copy your .nbh file to the card and rename it cheeimg.nbh. Insert the card into your Cheetah and put it into bootloader mode by holding down the media key and depressing the reset. the update process is displayed.
I can't connect my phone through activesync but I heard that you can update ur rom through ur mini sd card. I already downloaded a rom to my mini sd card but what do I do now. how do I actually upgrade my rom thriugh my mini sd card
Hello!
Since I have updated to WM6.1 i cant use WM5torage anymore. Even the trick with cardexport doesnt work.
I get a Storage in Windows but it isnt accessable
what can i do?
thank you
u can use Softick Card Export instead of WM5torage.
I would like to try, but i tried the older version and the shareware time is over
i would like to try the new version
do someone knows the registry key to kill?
thankx
Push UP
no idea?
I use Softkick Card Export 3.14 it works on a tilt with WM6.1 (ATT OEM rom)
Softkick Card Export 3.14 works on my HTC TyTN II with official HTC WM6.1 ROM.
I am using Card Export as well on WM 6.1 L26 v12. I have been using it for quite a while.
I love it, well worth the money.
I have BartPE loaded on my 8GB Card along with my normal apps. I can boot any PC using Card Export and a USB Data cable to BartPE and do data recovery and the like.
I tried today the last version, but I found it very slow near to ActiveSync.
Why when I read/write my microsd from a card reader is 20x faster?
Thanks!
Wm5torage works on the 17/09 HyperDragon rom. At least on my kaiser
is there any way to upgrad my K-jam by useing the sd card as some other devices like jas jam by renameing the rom file and save it on the card
I mean to flash with out cable just by the card
my device dos't make any connection with the computer so I use the cable only to charg the battery
No, htc devices doesn't use that method.
SD method in htc is only suitable for unlocked G3 wizard, and the SD image can only be generated from a working unlocked G3 wizard, you can't generate the image from ROM file.
I did that but in other way I could to copy the new rom from other k-jam device to my sd card then i put the card in my device
but now I haven't an other k-jam device I only have the one how has a problem in usb
by the way I unlocked my device and it 3g