Hello,
I have a stock WM5 ROM image for my Trinity.
If I flash my Trinity with a custom WM6 ROM from this forum, I cannot flash the stock WM5 rom right back if I don't like it can I?
wm6-wm5
hi m8, when i started flashing roms i went from wm5-wm6 and back again no problem. the only weird thing that happened was when i went back to stock wm5 rom it overwrote the olipro's spl. but i just flashed another spl (des's) and everything is cool again.
Related
HAS anyone uninstalled or overrided IMATE UPGRADE rom and reverted to original CINGULAR 8125 ROM? IF so, please list steps. I'm within 30 day period and don't want to send back with HTC and IMATE info and splash pages
Thanks
same here.. please help someone.. someone...
i had the same issue, and didnt find original, but for what its worth, exchanged my 8125 with no problem with i-mate rom.
good luck!
IF you can find someone with an SD backup (you shoulda made one when you started screwing around!) this is trivial to do.
Otherwise its somewhat of a PITA......
could you please outline the steps needed to accomplish this simply?
I am currently back at the cingular rom, but I could not restore the extended rom.
Basic rundown, After screwing around witht eh imate rom, decided to try to go back, found out I could not.
There is a particular issue with imate locking the extended rom, and problems running awizard and lokiwiz on a imate rom.
So, I went a round about way (suggested by someone else).
I used the tmobile uk rom (comes with same installer as teh iamte one), once that was installed, I ran awizard, which ran fine, and restored my cingular rom and splash screen (this is of course assuming you made a backup of the rom the first time around).
Only thing I cannot do, is restore the cingular extended rom.
Hi all,
i have a big problem flashing a new wm6 rom to my wizard. The wizard is CID unlocked following the How to flash a new ROM to your Wizard... a little tutorial! tutorial.
I had 2 WM6 roms on my wizard - 1 of them was WM6 crossbow, which i used a couple of months - both flashed w/o any problem and worked perfectly.
Last day i decided to flash the TNT touch flo rom but the install wizard ended with error on 99%, then i tried the TNT professional + home - same result, then i tried to flash the crossbow rom - same result. Then i returned to the unlocking howto - and followed it again but i can not flash wizard_love rom (ands at 98%) and Xda_MiniS_LaunchROM_v154102 (ends at 85%). I tried the whole procedure many many many times... but unfortunately the only rom i can flash w/o any problems is the t-mobile rom. Nothing else works...
Any help is highly appreciated!
Thanks!
succsess flashing new rom to my wizard
Hi All,
i tried to flash WRCX 2 (TouchFLO) after i flashed the t-mobile rom and i had success!!! I have it now running w/o any single problem .
As i posted above i tried the whole procedure with many other WM6 roms without luck ...
I am wondering what could be the problem here ...
My Qtek 9100 is dead after flashin new rom
After I flashed the newest rom version downloaded from official QTEK website
my 9100 has just 'died' without any signal.....
My previous rom was in spanish I tryed to put the new rom in english version something like 2....wwe and now it came a big trouble...
Somebody can help on this isue?!!
Thanks...
cimi said:
After I flashed the newest rom version downloaded from official QTEK website
my 9100 has just 'died' without any signal.....
My previous rom was in spanish I tryed to put the new rom in english version something like 2....wwe and now it came a big trouble...
Somebody can help on this isue?!!
Thanks...
Click to expand...
Click to collapse
Try to get the phone in Bootloaders (multicolor screen) and flash the Rom with 'RUU_Noid' utility,you can search for this in the forum or read this thread :-
http://forum.xda-developers.com/showthread.php?t=291215
Hi there,
it´s quite urgent, as my device does not work anymore.
I had the official German 2.32 Stock ROM installed.
Then I installed the Jade Hard-SPL_V41.exe and upgraded to this WM65.
Worked more or less, but wanted to go back. So I tried to install the jadestockruu_140 to flash back and then to install step by step first the 1.40er ROM and then upgrade back to the official 2.32 ROM. But this did not work.
Now the tricolor-screen says:
JADE100 64M
SPL-1.40.0000
MicroP-Jade (LED) 5
So everything fine, I thought, flash back to ROM 1.40... But at 0% it stops. Every ROM-Update which I try out stops at 0% and does not work. And now, to make it perfect, the WM65 does not connect to the phone anymore...
Time to throw it in the wastebin? Hope not... What are the steps to go back to Stock ROM 2.32?
Thanks a lot for your help!!!
DaM79 said:
Hi there,
it´s quite urgent, as my device does not work anymore.
I had the official German 2.32 Stock ROM installed.
Then I installed the Jade Hard-SPL_V41.exe and upgraded to this WM65.
Worked more or less, but wanted to go back. So I tried to install the jadestockruu_140 to flash back and then to install step by step first the 1.40er ROM and then upgrade back to the official 2.32 ROM. But this did not work.
Now the tricolor-screen says:
JADE100 64M
SPL-1.40.0000
MicroP-Jade (LED) 5
So everything fine, I thought, flash back to ROM 1.40... But at 0% it stops. Every ROM-Update which I try out stops at 0% and does not work. And now, to make it perfect, the WM65 does not connect to the phone anymore...
Time to throw it in the wastebin? Hope not... What are the steps to go back to Stock ROM 2.32?
Thanks a lot for your help!!!
Click to expand...
Click to collapse
Put Hard SPL back on your phone. Flash the stock ROM.
If you want the Stock SPL, flash it after you have the stock ROM on your phone, not before.
Ta
Dave
Thx! Just 4min before your kind answer (Thx!) I found this video in German, for Noobs! Might be usefull to place it in the FAQ? Its really good!
http://www.youtube.com/watch?v=fV2I2WAFkg4
Everthing is working again! SOLVED!
DaveShaw said:
Put Hard SPL back on your phone. Flash the stock ROM.
If you want the Stock SPL, flash it after you have the stock ROM on your phone, not before.
Ta
Dave
Click to expand...
Click to collapse
Apparently this is something for the 1st post in the hardspl thread
edit: it's already there..
hi
i thought that wm6.1 is faster than wm6.5 so after hardspl flash my new topaz with wm6.1 rom but it didn't start .after soft flashing and rest just shows startup picture and restart again .so i had to reflash it to wm6.5.
the question is how can i use wm6.1 and???
thanx in advanced
farzad23 said:
hi
i thought that wm6.1 is faster than wm6.5 so after hardspl flash my new topaz with wm6.1 rom but it didn't start .after soft flashing and rest just shows startup picture and restart again .so i had to reflash it to wm6.5.
the question is how can i use wm6.1 and???
thanx in advanced
Click to expand...
Click to collapse
I think you would need to downgrade your SPL.
So you would need to reinstall SSPL, then just install HSPL 1.83, then the 6.1 ROM. You will probably have "commercial use" issues to reinstall 1.83 so I would send the Olinex team an e-mail first before trying.
thanx Bruce Inman for u'r reply.i'm waiting for
hi Bruce Inman
I did what you said before.downgarde hard spl to 1.8 ver and then flashed my topaz with wm6.1 cocked and stock but didn't work. in boot session reboot cycling occur.
downgrading spl is not necessary i think, because i have also downgraded 6.5 to 6.1 last week, and my topaz got the latest hspl. last year i downgraded my kaiser to 6.0 and 6.1 with the latest spl.
i think the rom image you acquired is damaged, try re-downloading it
@Carrier
hi
i tested many rom cocked and stock .when i bought this damn topaz it was wm6.5
i think all fu... HTC are slow ,unstable .
I tried the same my self with official ROM from HTC. I didn't have to downgrade SPL because my phone for some reason is unable to be flashed HSPL Olinex ??
Operation run smoothly but after finishing topaz entered a constant reset loop after boot screen
I run out of ideas ...
Hi all,
please if someone can help me solve problem.
I got few days ago Touch Diamond2. It has WM6.1 ROM on it. I tried to upgrade with official ROM from htc.com to wm6.5 but it hangs on 18% with error "communication error". Phone turned on in recovery mode. After that i tried flashing with custom roms but no luck again. It hangs on HTC screen when booting and nothing happens. I flashed it back with shipped 6.1 ROM from HTCpedia and it started normal.
When i start it in boot load mode it states 1.33 Olinex SPL. Do i need to put original hardSPL before upgrading to official ROM or there is something else i am missing?
Tnx in advance
Borna_bkpdata said:
Hi all,
please if someone can help me solve problem.
I got few days ago Touch Diamond2. It has WM6.1 ROM on it. I tried to upgrade with official ROM from htc.com to wm6.5 but it hangs on 18% with error "communication error". Phone turned on in recovery mode. After that i tried flashing with custom roms but no luck again. It hangs on HTC screen when booting and nothing happens. I flashed it back with shipped 6.1 ROM from HTCpedia and it started normal.
When i start it in boot load mode it states 1.33 Olinex SPL. Do i need to put original hardSPL before upgrading to official ROM or there is something else i am missing?
Tnx in advance
Click to expand...
Click to collapse
updating your Hard-Spl to HSPL 1.83 first ! in order to flash WM 6.5 rom or custom rom
Hi and tnx for quick answer.
Just to confirm. I need to update even if I want to flash official WM6.5 rom from htc.com?
Borna_bkpdata said:
Hi and tnx for quick answer.
Just to confirm. I need to update even if I want to flash official WM6.5 rom from htc.com?
Click to expand...
Click to collapse
I think it could, try it !
Doesn't the official WM6.5 ROM update include an embedded SPL though? Although if flashing from official ROM to custom ROM or vice versa you'd definitely need to update HSPL.
netrial said:
Doesn't the official WM6.5 ROM update include an embedded SPL though? Although if flashing from official ROM to custom ROM or vice versa you'd definitely need to update HSPL.
Click to expand...
Click to collapse
Please Read Carefully the instruction for installing HSPL 1.83 or better to upgrade it to 2.51.OliNex.Make Sure U Have a internet connection on as hspl needs internet to install.