hi
i thought that wm6.1 is faster than wm6.5 so after hardspl flash my new topaz with wm6.1 rom but it didn't start .after soft flashing and rest just shows startup picture and restart again .so i had to reflash it to wm6.5.
the question is how can i use wm6.1 and???
thanx in advanced
farzad23 said:
hi
i thought that wm6.1 is faster than wm6.5 so after hardspl flash my new topaz with wm6.1 rom but it didn't start .after soft flashing and rest just shows startup picture and restart again .so i had to reflash it to wm6.5.
the question is how can i use wm6.1 and???
thanx in advanced
Click to expand...
Click to collapse
I think you would need to downgrade your SPL.
So you would need to reinstall SSPL, then just install HSPL 1.83, then the 6.1 ROM. You will probably have "commercial use" issues to reinstall 1.83 so I would send the Olinex team an e-mail first before trying.
thanx Bruce Inman for u'r reply.i'm waiting for
hi Bruce Inman
I did what you said before.downgarde hard spl to 1.8 ver and then flashed my topaz with wm6.1 cocked and stock but didn't work. in boot session reboot cycling occur.
downgrading spl is not necessary i think, because i have also downgraded 6.5 to 6.1 last week, and my topaz got the latest hspl. last year i downgraded my kaiser to 6.0 and 6.1 with the latest spl.
i think the rom image you acquired is damaged, try re-downloading it
@Carrier
hi
i tested many rom cocked and stock .when i bought this damn topaz it was wm6.5
i think all fu... HTC are slow ,unstable .
I tried the same my self with official ROM from HTC. I didn't have to downgrade SPL because my phone for some reason is unable to be flashed HSPL Olinex ??
Operation run smoothly but after finishing topaz entered a constant reset loop after boot screen
I run out of ideas ...
Related
I assume that in hardware there are not more differences between Herald and Wizard than between Charmer and Prophet.
So what problems will I have if I flash only OS part of Herald ROM to my Wizard (except missing camera and another keyboard layout)
I thing it will not work/boot
I have tryed on wizard charmer ROM and it freeze on splash screeen.
You can try it. If you will flash only OS part, you will NOT change your device into a brick i mean
i have posted same thing about month ago but i still dont flashed my spv... if wizards rom work on prophet?
only os will not brick wizard - thats for sure
yep,
If you don`t flashing IPL and SPL (bootloader) - You can`t brick your phone..
Wizard ROM works on Prophet? Really? It is incredible
Johnnnnnnnnnny said:
yep,
If you don`t flashing IPL and SPL (bootloader) - You can`t brick your phone..
Wizard ROM works on Prophet? Really? It is incredible
Click to expand...
Click to collapse
Can't?
I asked ANOTHER question:
Wizard is QWERTY PDA Phone
Herald is QWERTY PDA Phone
Prophet is PDA Phone? It's "keyboardless", and it's another story
There is no official AKU3.x ROM for Wizard, but Herald is official "AKU3.x device" and i suppose that in hardware these models are quite similar.. So maybe there is no need to use cooked AKU3.x ROMs and i can use Herald's OS
En1gma said:
I asked ANOTHER question:
Wizard is QWERTY PDA Phone
Herald is QWERTY PDA Phone
Prophet is PDA Phone? It's "keyboardless", and it's another story
There is no official AKU3.x ROM for Wizard, but Herald is official "AKU3.x device" and i suppose that in hardware these models are quite similar.. So maybe there is no need to use cooked AKU3.x ROMs and i can use Herald's OS
Click to expand...
Click to collapse
It is possible to flash Wizard's ROM to Prophet. But you should change some drivers.
yesterday i try to flash modified herald's rom to my wizard.
After that i saw these on my splash screen:
IPL:2.26
SPL:2.26
GSM:2.25.11
(blank)
OS: 1.20
My wizard didn't boot, so i reflashed it back to my AKU3.2.1. If i have more free time, ill try once more to prepare heralds rom for wizard
mun_rus said:
It is possible to flash Wizard's ROM to Prophet. But you should change some drivers.
yesterday i try to flash modified herald's rom to my wizard.
After that i saw these on my splash screen:
IPL:2.26
SPL:2.26
GSM:2.25.11
(blank)
OS: 1.20
My wizard didn't boot, so i reflashed it back to my AKU3.2.1. If i have more free time, ill try once more to prepare heralds rom for wizard
Click to expand...
Click to collapse
how did you extract herald os from the RUU_signed.nbh File ?
many thanks
Jimmy
im remember one guy who said he flashed his prophet with aku3.2 rc1 (wizard) (the first aku3.2 rom on this forum) and he said that only camera doesnt works.
wizard doesnt boot with herald rom? so we must to wait more time..
mun_rus said:
It is possible to flash Wizard's ROM to Prophet. But you should change some drivers.
yesterday i try to flash modified herald's rom to my wizard.
After that i saw these on my splash screen:
IPL:2.26
SPL:2.26
GSM:2.25.11
(blank)
OS: 1.20
My wizard didn't boot, so i reflashed it back to my AKU3.2.1. If i have more free time, ill try once more to prepare heralds rom for wizard
Click to expand...
Click to collapse
thnx
I wait answer like yours..
but it's a bad news..
and where did you found herald's rom?
Hi guys,
this is one of my first post here but I read you everytime. So, the problem now is: my P3600 don't want to flash with any rom.
I've just take it back from assistance for to change the black cover (2nd time...) and when I want to flash, as before I was given to the assistence, with udK 6.1 rom it don't want to flash with any other roms!!
I've now download the Lite version of udK 6.1 and install it but when I've discovered that I prefer the full version that's start the never ending story: I tryed to flash with Full version 2 or 3 time already, the installation goes to 100% but when it restart (should it restart not power off?!?) the rom is always the same Lite version. I tried to use also the official wm5 from HTC without manual entry into bootloaded but after flashing is 100% the rom is always udK 6.1 Lite. I have SPL Olipro 1.20 installed (in the past I've had no problems at all!)
Anyone can help me to flash (with lowest risks) my P3600 again?
Thanks to everybody!
no ideas guys?
so no one can help me with an idea???
What version is your Trinity? P3600 or P3600i? Just to confirm eventhough you mentioned P3600 in the subject.
jackkkkk said:
What version is your Trinity? P3600 or P3600i? Just to confirm eventhough you mentioned P3600 in the subject.
Click to expand...
Click to collapse
it's a P3600
Do a hard reset and flash an OFFICIAL ROM from SD-card
Switch to Des' Crash Proof SPL and try flashing the ROM straight from SD card.
This should work.
thank you very much. I've already tried to change to Des Crash Proof but at about 13%-14% it gives me an error when I reboot by softreset the system is always the same. Is it normal? Is there a specific procedure to change SPL software?
If it works at all after SPL flashing, then you must have followed all procedures. Try flashing Olipro's SPL and scan for bad blocks in flash.
nightblade said:
Hi guys,
this is one of my first post here but I read you everytime. So, the problem now is: my P3600 don't want to flash with any rom.
I've just take it back from assistance for to change the black cover (2nd time...) and when I want to flash, as before I was given to the assistence, with udK 6.1 rom it don't want to flash with any other roms!!
I've now download the Lite version of udK 6.1 and install it but when I've discovered that I prefer the full version that's start the never ending story: I tryed to flash with Full version 2 or 3 time already, the installation goes to 100% but when it restart (should it restart not power off?!?) the rom is always the same Lite version. I tried to use also the official wm5 from HTC without manual entry into bootloaded but after flashing is 100% the rom is always udK 6.1 Lite. I have SPL Olipro 1.20 installed (in the past I've had no problems at all!)
Anyone can help me to flash (with lowest risks) my P3600 again?
Thanks to everybody!
Click to expand...
Click to collapse
Make sure that your SD card it out
I've tried to download the ROM, but HTC tell me this "Sorry, this software download is not suitable for your device".
Maybe my device s/n number is not correct.
Maybe someone who has the correct s/n could download this ROM~
Just tell you guys the news~
http://www.htc.com/europe/SupportDownload.aspx?p_id=174&cat=2&dl_id=537
Caxio's and frednd's DownLoad Link--(I wanna say THANK YOU VERY MUCH!)
See page3 #21 & #23
Filename is :
HTC Touch 3G_MR2009_RUU_Jade_HTC_Europe_2.32.401.2_Radio_Sign_12.41.30.16_0.41.30.12_Ship
edit:
on booting the last red line (after radio and protocol) now says :
D 2.32.44800
Date (which shows after first boot) after screen calibration is now set to 25/03/09
(in settings / about) Build : 5.2.20771 (20771.1.4.6)
(in settings / device info) : rom version 2.32.401.2(44800)
ON customization after first boot if scaned for wifi networks and poped up a message about available networks
Ht845kh14923 :d
o2p63 said:
Ht845kh14923 :d
Click to expand...
Click to collapse
This is for italian version.
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
It seems HardSPL 1.40oli and this 2.32 rom don't work very well.Very sluggish and phone can't turn ON even after 2 Hard resets.
What is your experience???
Do not install if hard spl
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Could anyone check, if the gps-support has been improved?
km
lexx2009 said:
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Click to expand...
Click to collapse
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
update : Jade is fine now. New SPL is 2.32.0000 . More testing to be done.
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
lagoskon said:
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
Click to expand...
Click to collapse
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Myster said:
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Click to expand...
Click to collapse
This is on the Hard-SPL page along with the Oli version
http://forum.xda-developers.com/attachment.php?attachmentid=166262&d=1236988725
GPS seems to work fine now, also the scroll behavior of opera is better
km
It is annoying that hardspl doesnt work with this upgrade of jade.. can't built a rom now with the new oem. It's all newer than the iolite versions, but still doesnt include Footprint
Any changes in Manila? New tabs? Calendar? Stocks? Changes in the contacts?
Hi
What is the Radio version in this new ROM?
I have just applied the version from here and if this contains the old Radio then I can hold off for now until hopefully a compliant Hard-SPL is made, I can live without Opera being perfect.
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
nereus114 said:
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
Click to expand...
Click to collapse
Install a different rom from this forum-> Shut down your jade, unplug it. Hold down "volume down button" and ""power on button" to get in to boot mode. now start to flash another rom.
when finished you can install stock spl and then install this new rom
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
jarel said:
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
Click to expand...
Click to collapse
that's right.. but i think it's in one of the drivers. using the old drivers and the new oem/sys makes it possible to run it with the current hardspl.
radio in this rom 0.41.30.12
no changes in manilla tabs, don't know what changed but it's newer
hi ( xcuse me my english is not on top )
i have a big problem
all wm6.1 rom won t install in my t5353
i bought it on may 2010
i explain
after a topaz task 29 and an hspl 1.83 and installing the rom
this rom 6.1 reboot on the boot screen ( htc diamond 2 )and reboot and reboot and reboot etc etc
i try many rom 6.1 and it s all the time the same problem
if you have idea i take it
thanks a lot
First confirm that you infact installed HSPL 1.83 by going into bootloader. It will show "Olinex" as a suffix.
It sounds like either the ROM didn't flash correctly or you flashed with SSPL.
To recover, just find your shipped ROM and flash from PC in bootloader mode.
Hi all,
please if someone can help me solve problem.
I got few days ago Touch Diamond2. It has WM6.1 ROM on it. I tried to upgrade with official ROM from htc.com to wm6.5 but it hangs on 18% with error "communication error". Phone turned on in recovery mode. After that i tried flashing with custom roms but no luck again. It hangs on HTC screen when booting and nothing happens. I flashed it back with shipped 6.1 ROM from HTCpedia and it started normal.
When i start it in boot load mode it states 1.33 Olinex SPL. Do i need to put original hardSPL before upgrading to official ROM or there is something else i am missing?
Tnx in advance
Borna_bkpdata said:
Hi all,
please if someone can help me solve problem.
I got few days ago Touch Diamond2. It has WM6.1 ROM on it. I tried to upgrade with official ROM from htc.com to wm6.5 but it hangs on 18% with error "communication error". Phone turned on in recovery mode. After that i tried flashing with custom roms but no luck again. It hangs on HTC screen when booting and nothing happens. I flashed it back with shipped 6.1 ROM from HTCpedia and it started normal.
When i start it in boot load mode it states 1.33 Olinex SPL. Do i need to put original hardSPL before upgrading to official ROM or there is something else i am missing?
Tnx in advance
Click to expand...
Click to collapse
updating your Hard-Spl to HSPL 1.83 first ! in order to flash WM 6.5 rom or custom rom
Hi and tnx for quick answer.
Just to confirm. I need to update even if I want to flash official WM6.5 rom from htc.com?
Borna_bkpdata said:
Hi and tnx for quick answer.
Just to confirm. I need to update even if I want to flash official WM6.5 rom from htc.com?
Click to expand...
Click to collapse
I think it could, try it !
Doesn't the official WM6.5 ROM update include an embedded SPL though? Although if flashing from official ROM to custom ROM or vice versa you'd definitely need to update HSPL.
netrial said:
Doesn't the official WM6.5 ROM update include an embedded SPL though? Although if flashing from official ROM to custom ROM or vice versa you'd definitely need to update HSPL.
Click to expand...
Click to collapse
Please Read Carefully the instruction for installing HSPL 1.83 or better to upgrade it to 2.51.OliNex.Make Sure U Have a internet connection on as hspl needs internet to install.