Hello Guys, (love this forum)
I have the HTC PRO and I'm getting depressed because the volume buttons alway (somehow) turn down the volume of the ringtone. I miss calls more then ever.
I searched this forum but couldn't find any answers to this.
I did found one solution for the HD. Change something in the Register (defaultpage from 1 to 0) Didn't on my Pro aswell on the HD of my friend.
Anyone else got a clue to switch this buttonoption off. Tho I need the buttons for the systemvolume. Maybe somebody knows how to get rid of the ringpage completly and just leaving the systempage working.
MANY THANKS to Anybody that can help..!
(if I did anything wrong on this forum or upset anyone - sorry, I am a newbe)
Greetings,
MDK
I can honestly only advise 1 thing, and that is that you install S2U2 which is a free soft that locks your phone and the buttons as well,
I've got another option which is changing the volumecontrol.dll but afterwards all your apps will minimize every time you open the keyboard = flip the screen... And this is even more annoying when you want to reply to an sms...
I had the same problem but S2U2 is the best option
Another vote for S2U2
But, if you have updated to the "leaked" 6.1 update (at&t rom), it might cause you a headache, at least it did with me. When the phone would announce an incoming call, s2u2 & the new built in slide to answer will fight each other.
Wait, I think you mean that when you put the system volume down, the ring volume goes down...right. You can put the system volume down and tap the Ring tab and put that volume up.
Related
This one's got me stumped, I may just be overlooking a simple answer but it hasn't happened previously on my Magician or Vario before.
I carry my Vario III around in a large coat pocket for most of the time. I have a lot of appointments and calls which activate the screen when they occur. I then have the problem when fishing around for the device that a) I answer the call from touching the screen, b) End the call from touching the screen, c) Open a load of different apps where the appointments have made the screen go live and the movement in the pocket has brushed the screen.
All I want to do is use only the hardware buttons ie. Answer, End, Power button. Where can I find the settings for this? The "key settings" menu or "buttons" doesn't cover it so where is it? It's driving me mad!
Hold down the 'red' phone button to lock all but 'Power' and 'Unlock' soft key.
You can still answer a call as normal when it comes in with the with the 'green' phone key.
Thanks. I know about the standard lock, but then you're into multi key press territory to unlock it. I just wondered if someone knew of a way (or program) that once the screen was off it stayed off until the answer, reject or power button was pressed and then in the case of the power button the device returns to "normal".
I'm not sure if your idea would be very viable. The screen has to come on so that you can see who's calling!
Pretty pointless to reject a call when you don't know who it is.
I understand what you are trying to get at but wouidn't you still have the problem of not being able to use any other functions within a call like looking up a Contact or checking your Calendar. Hitting the Power button during a call to get back to normal use would be a bit 'hit n miss'.
Thanks for the reply. I agree it's not ideal and I guess if it was something everyone wanted someone would have brought a .CAB out for it. That my Q answered in any case. Thanks again.
Try searching the forum for 'S2U2'. It might be what you're looking for.
That should cover it just fine. Thanks for the pointer.
Nice one helterskelter
Didn't think he would want to open it to answer a call thats all as he seems to have big fingers and hit everything but 'Answer'
No, sorry, just my dark humour...
Hope you are sorted.
Hey guys,
Right, I've come over from symbian, namely UIQ and the SE P-series, so am used to things being somewhat different. The main issue I don't seem to be able to find a solution to is the screen locking problem.
Essentially, at the moment I push the power button to lock the device, as well as enter a power save mode. I have to say, I like the way that works. However, when I recieve a call (or text with the reg fix) the phone comes to life, great, but say I miss the call, or the phone is in my pocket, the screen is now ACTIVE. Not good news.
How am I supposed to lock this device properly? Screen lock and then the power button? Can't I get a simple tap on the power button to lock and power save the device?
Essentially, if I have a missed call or message I just want the phone to vibrate once, then keep an LED flashing intermittently. But I want the screen to stay LOCKED.
Any help would be much appreciated, and thanks for all the other useful tips on the forum!
Cheers,
Daz.
Go start/settings/System/Long Press End Key
Select automatically execute etc
and Lock device
then OK
then, a long press on the hang up button (bottom right) will lock the phone.
Hope that helps
Perhaps I didn't explain myself. I know how to lock the phone, but how do I make use of the power button tap mode? In other words, the power saving mode?
Can I set up a button that locks the phone, AND sends it to power save mode? (or "turn it off" as WM seems to call it).
Thanks again,
Daz.
I found a regedit in:
HKLM\Software\HTC\KeyLock\SameAsDeviceLock
Set it to 1, but it doesn't do the trick. In fact, it now causes the power button click to not lock the keys.
I suppose the only option is to have standby mode come on after a timeout, lock the device, then it will go into standby on its own. Seems like a slight waste of battery to me!
Cheers,
Daz.
I really want this to work too,
It should unlock and turn on when recieving a call, it should just turn on when recieving an sms (so you can have a quick look from who it is, and then unlock to reply)
and when you lock the device it should automatically turn off...
Not EXACTLY what you want, but S2U2 in the "Development and Hacking" section will improve matters for you.
When you turn the phone off with the power button, S2U2 kicks in. Then:
1) If you turn the phone back on, you'll get the slide to unlock screen.
2) If a call comes in, the phone turns on and you see the caller ID (with full screen picture, if you so desire) on a "slide to answer" screen. The S2U2 default settings ensure that the phone turns itself back off again if you fail to answer it.
3) If a text / e-mail / mms comes through, it notifies you but remains off... When you hit the power button, the "slide to unlock" screen will show missed calls, text messages, e-mails (and even the weather if you want...).
Check it out, it's an essential piece of software in my opinion... http://forum.xda-developers.com/showthread.php?t=381588
Thanks sub69, great recommendation. However, does anyone else get the bug when hitting the "x" in other applications to close them, the status bar (Or task bar) goes all scrambled and looks like the S2U2 status bar.
Shame this isn't built in though, would be nicer to see the TF3D interface rather than a 3rd party one.
Thanks again!
Daz.
Anyone with other suggestions? S2U2 is just a little too buggy at the moment on the diamond...
use "BatteryStatus" from www.chti-tai.info, they have a option for devicelock on wakeup, so even u missed a call, and the screen light up, it is still locked.
somone posted this on other thread.
--------------------------------------------------------------------------------
Now we don't need any devicelock software with diamond.
If you want automatic lock your diamond you have to change this registry key HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off automatically your device are locked
Sorry for may bad english but i'm italian.
Ciao
Thanks for that reg fix, seems like a good option. There was a new S2U2 version release, 1.5, and that seems to work well for me. Will see how that goes for now...
Cheers guys! Daz.
the reg edit is good, but it doesn't solve the problem of unlocked touchscreen prone to being pressed during incoming call (when scrambling in your pocket to take out the phone)
btw there are several other threads where this problem is addressed and deeply analyzed (without a complete working solution, however...)
dazbradbury take a look at sensorlock, if you have not already.
(Sorry - this was previously in the wrong thread category)
Hi,
after installing some software apps (numerous freeware utilities), my diamond does not ring anymore when I am called (it does vibrate).
I have checked everything but cant switch the darn ringing on again - other sonds work fine, it just doesn't ring. This is the second time this has happend - after the first time the hard-reset fixed the problem, but then I reinstalled several programs again and the same problem is back again.
Does anyone have any ideas what I can do about this without doing a hard reset?
Perhaps there is a Tweak utility where I can see if the ringing has been switched off?
Please help.
Thanks in advance - I would really appreciate any suggestions.
Berx1 said:
(Sorry - this was previously in the wrong thread category)
Hi,
after installing some software apps (numerous freeware utilities), my diamond does not ring anymore when I am called (it does vibrate).
I have checked everything but cant switch the darn ringing on again - other sonds work fine, it just doesn't ring. This is the second time this has happend - after the first time the hard-reset fixed the problem, but then I reinstalled several programs again and the same problem is back again.
Does anyone have any ideas what I can do about this without doing a hard reset?
Perhaps there is a Tweak utility where I can see if the ringing has been switched off?
Please help.
Thanks in advance - I would really appreciate any suggestions.
Click to expand...
Click to collapse
didi you installed pointUI and the SystemInternalsV2????
you might not like the answer, but hard reset has fixed that problem for me with the diamond and 2 other htc phones i had in the past.
adempozhari said:
did you install pointUI and the SystemInternalsV2????
Click to expand...
Click to collapse
What is pointUI ? - I have the standard diamond branded user interface from O2 with all the system internals and the ROM version 1.93.207.2 German.
Please help me - I really do not want to do a hard reset because the last time I could not retrieve my back up with the Sprite backup utility .
Thanks in advance for any help.
i can't believe i'm now posting in this. i remember telling you to post this on the main diamond forum and now i'm having the same problem.
i've tried putting the ringtones in the internal storage, and on the phone's main memory, sometimes i hear the ring for a split second before it goes silent.
from searching, it seemed like some people have had this issue with some SRS WOW program but I don't have that.
have you been able to resolve this? I too would like to avoid a hard reset if at all possible, i just got the phone setup the way i want it and it would take a ton of time to get it back....
This may sound stupid, but give it a try, it has helped before...
Go to the settings tab in TF3D.
Tap Sound
Set Volume at 100%
Sometimes, the ring volume gets reset to 0 by itself, and it took me 4 weeks before I found it, after trying about everything, from uninstalling every app to hacking the registry.
Twabi2 said:
This may sound stupid, but give it a try, it has helped before...
Go to the settings tab in TF3D.
Tap Sound
Set Volume at 100%
Sometimes, the ring volume gets reset to 0 by itself, and it took me 4 weeks before I found it, after trying about everything, from uninstalling every app to hacking the registry.
Click to expand...
Click to collapse
that's usually one of the first places i check... i'll keep it in mind though.
i think i might have an idea what my issue might be, so it was working this morning but i noticed microsoft's voice command was announcing the name of the caller as it was ringing. so i think it might be an issue with the msvc. i'm going to try disabling the voice announce and see what that does...
Problem Solved!
Hi,
guess what - I finally found the solution
I never bothered to read the Diamond manual as I believed the user friendly interface to be self-explanitory - however, I overlooked something very important!
When setting the volume up or down by means of the buttons on the left hand side of the Diamond, the usual vertical bargraph type of display appears and reacts according to how the adjutment is made with the volume up or down buttons, this is clear. There is also the possibility to mute the phone or to put it into vibration-only mode.
Now, at the top left hand side, there is an arrow (looks like this: <). If you quickly tap on that with the stylus before the screen goes away again, you will get a new screen for another setting - now this setting is for adjusting the ringing volume / mute / vibration settings (now the arrow is on the top right and looks like this: >
It is so simply expained: The system volume is not the same as the telephone ringing volume and just requires the quick click on the top left hand side of the screen and voila, bob is your uncle! You can then set the ringing volume up and your phone will ring again.
I wantend to know why the heck the ringing volume just changes or what caused the problem and I have also been able to determine why the ringing volume settings change - to explain:
When setting the SYSTEM VOLUME to mute - then the PHONE RINGING VOLUME is also muted! However, when then setting the system volume up again, the ringing volume still remains muted! This is important to know and it can also happen accidentally or it may be forgotten to reset the ringing volume. I dare to say that this was not really thought about very well and I hope the developers will change this or show a VOLUME STATUS for both the SYSTEM and RINGING volumes somewhere on the desktop/today screen.
... or would that not be a good project for a developer here on this forum perhaps? I would appreciate a comment here...
Thanks anyway for the kind responses and willingness for your help.
I have to date still not read the actual over 260 page little manual booklet, but it probably is described in there. Moral of the story: RYFM (for those who know what that stands for)
Amendment: Found it described on page 42 in the manual booklet - it's actually described there but can be easily overlooked and it is not described that the system volume settings affect the ringing volume settings.
Ok, so the phone rings now but I have a similar problem with my GPS receiver
I will open another thread for this - hopefully someone can help me.
Best regards,
Mike - Germany.
I had the same problem.
It happened to me.
All the system sounds were fine, but the ring wasn't there.
Checked settings, change ringtone, tried a lot of stuff.
I was begginning to think about a hard reset when I found my problem origin:
At least in the ROM that I use (Shaks), when you press one of the volume keys in the side of the phone, you change system and ring volume.
If I press it all down, it goes to zero then vibrate then silent, and normally the system and ringer volumes are equal when you do this.
In that system volume screen that appears when you press volume key, there is a arrow in the top left. If you press it, you'll go "ringer volume" screen. I noticed that system volume was in maximum but the ringer volume didn't fallow it.
That said, if your ROM uses the volume keys in that same way, press that arrow and check if the ringer volume is on too.
Hi all,
a few days ago i saw a strange behaviour of my X1
If i push the on/off button the X1 starts the phone app and sometimes even the caroussel function of MS3.
I didn't install new apps or change reg keys.
The system was running almost perfect in the last months
After a hardreset yesterday i reconfigured my X1 and it seemed well for the moment. I turned the device on and off several times and it showed normal behaviour.
A few hours later (X1 was not in use) i pushed the on/off button and the problem was back again...
IMO the X1 acts like someone pushes the left silver button and sometimes the green tel button.
Has anyone an explanation for this?
Ideas for solving?
Thanks
Horst
one program I use on the X1 is called AE button Plus
it can remap all the hardware buttons on my X1, maybe you can try them and see if you can set the ON/OFF button from there, overriding your default action for a temp fix
Same problem here, after my xperia fall deep into the water!
I fixed this using s2u2
Thank you guys for the answers.
What i'm looking for is a reg key that changed or sth like that.
Unfortunately my knowledge about the registry isn't very good.
Perhaps one of the WM pros reads this and can give me an idea where to look...
Thanks
Horst
Dear PDA experts, please help me!!
since a couple of days I am having a VERY annoying problem with my HTC Diamond. This occurs when I am using the original hands-free. It looks like the cable is losing contact or making an incorrect contact...
So, when using the hands-free, the phone starts dialing the last dialed number by itself. When I am listening to music, the music stops and I am hearing how the phone is dialing. This usually happens, when I make the move to put my phone in my pocket. Also, when I speak with someone, the phone automatically puts him on hold, which is even more annoying for the other party! The problem persists even when I switch off the phone module, it still tries dialing!
I had tried many times to get rid of the voice dialer (sddialer.exe), but I cannot delete or rename the file even when I connect the Diamond to a PC. Finally I have disabled it from the registry and it still starts dialing when I make the move to stick it into my pocket!
And I dont have the impression, that the cable is somehow defective, as when I am listening to music, it does not break up. And it always does, when there is a problem with the cable, unfortunately I have a lot of experience with defective hand-frees. Please please help me!! It is not worthy to buy a new handsfree for such an old phone... Is there a way to disable all the buttons of the hands-free, it is the last possible solution I can think of...?
Use the lock screens
My Diamond did that too.
There are several lock screen capabilities that you can enable under settings. More important if you added a custom Rom they usually have a few different options.
With the custom Rom I was running, I could make a call and after pushing the power button, it would lock the phone when on the line with someone. This would happen if you hit any button after the power button was pressed (which usually turns off the screen).
Hope that helps.