Hello !
I wanted to reset my device to factory defaults over "settings - clear memory"
After a reboot, the phone locks up on the green windows logo while displaying "Clearing memory. Please wait" (translated - the german text is "Das Gerät löscht den Speicher. Bitte warten").
I tried Soft- and Hardreset.
Does anyone have a hint, how to solve this ?
Thanks in advance
/edit: WM6.1
/edit2: I get a new phone - memory was dead...
Related
Hello Everyone,
My BA is stuck at the Splash Screen, I suspect that the Bootloader is corrupt. Does anyone know how to flash it?
try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
imatrix
imatrix's suggestion.
@imatrix
Followed the steps before, and followed them again.. I'm still stuck.
Something interesting happened though:
There are two horizontal stripes across the splashscreen now.
I already tried to flash the OS, It doesn't work with the standard imate flash executable (It used to work before) and now I'm getting a 'MODEL ID ERROR' when I try to flash it using the BAupgrade... executable.
I tried with the MAupgradenoid tool, it flashes but I still get stuck on the splashscreen...
Thanks,
Wadih
BlueAngel Bootloader
Anyone has a way to either dump a bootloader file for the BA (Providing the file of course) or alternatively directives to copy it from another device (From the same make, i.e. Imate PDA2K) ?
Many thanks,
Wadih.
try this
http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error
imatrix
@imatrix
imatrix said:
try this
http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error
imatrix
Click to expand...
Click to collapse
I did, but as I specifed in me earlier post, eventhough the MAUpgradenoID flashes the files, I still get stuck at the splashscreen.
Interesting point: After flashing witht the MAUpgradenoID, I try reflashing back with the BAupgradeid.. I get the Model Error ID error back..
Something in the BA is wrong, and I believe it may be in the Bootloader. So, is there a way to replace the bootloader itself?
EDIT: By the way, I can't seem to be able to place a WM5 rom instead of the WM2003, although the flashing procedure starts, it quickly ends (i.e. without the percentage bar appearing) and says that the flashing worked successfully... But nothing gets actually flashed.
Many thanks for the help imatrix.
Regards,
Wadih.
hey,
check this out http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,38/
but i have to warn you, replacing a booter is very dangerous, anything goes wrong during process will kill your device. so please handle with care.
imatrix
@imatrix
imatrix said:
hey,
check this out http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,38/
but i have to warn you, replacing a booter is very dangerous, anything goes wrong during process will kill your device. so please handle with care.
imatrix
Click to expand...
Click to collapse
Thanks for the link, but how do I copy/get a clean boot bin file? (Which app, syntax, etc...)
Cheers,
Wadih.
BlueAngel froze on isalling wm6.5
much respect 2 all.I'm new here.i tried installing wm6.5 on my Blue Angel i tried putting it on a memory card i pressed power reset hold Camera and Record no luck. i didn't noticed this rom is for the Touch Diamond.i opened the file in the memory card and there was many files.i installed a few files i clicked one file and it froze.what i got is message serial on the top the screen and on the bottom of the screen is v1.02.i also tried sync it with computer no luck.can some one please help me and direct me 2 get wm6.1 because when Blue Angel 6.5 i was directed for the Touch Diamond rom.much respect.thanx a million thanx in advance.lol.
---------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it
BlueAngel froze on installing wm6.5
much respect 2 all.I'm new here.i tried installing wm6.5 on my Blue Angel i tried putting it on a memory card i pressed power reset hold Camera and Record no luck. i didn't noticed this rom is for the Touch Diamond.i opened the file in the memory card and there was many files.i installed a few files i clicked one file and it froze.what i got is message serial on the top the screen and on the bottom of the screen is v1.02.i also tried sync it with computer no luck.can some one please help me and direct me 2 get wm6.1 because when Blue Angel 6.5 i was directed for the Touch Diamond rom.much respect.thanx a million thanx in advance.lol.
---------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it
100/100 work
imatrix said:
try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
imatrix
Click to expand...
Click to collapse
thaks br very good
Hi, I have the problem, that windows does not recognize the Blue Angel any more, so no "WCEUSBSH001" available. Any help??
Thx
now i upgrade my mda3 to Helmi Windows Mobile 6 Profesional R0
CE OS 5.2.1620 (Build 18125.0.4.2)
and instalation was finish bout 4 min,that was wired,so when i restart half of programs didnt work.i search for problem and see my latest version of activesync was 4.2,i download last version and every time when i start upgrade again i push next then i got this.
http://img208.imageshack.us/my.php?image=55895612mi0.jpg
i check onlline problem for activesync all works ok,i configure my firewall..thx for every help and sorry bout my eng..
best regrades from cro..
if you dident do a
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
in the bootloader after the flash it could be because you have ½ of your old regs and such
thx now works,but wired thing is because i again install wm6 and instalation was finished bout 3 min..hm i hope so all is ok..
new problem i cant surf on net when mda is connected via activesync,with my last mda no problem but with mda3 nothing,i lost whole day with trying but ,please helpp..
Enable KITL -> NO Clean Registry Hive -> YES Format Storage -> YES
Where are this value:
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
Where I can set it?
Thanks
@secur
do hard reset
hold mic+camera button and reset button
Active sync
Hi,
I had a similar problem with active sync solved installing latest actyve sync version and turn off completely my firewall.
good luck
fixed,dns was problem..
secur said:
Where are this value:
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
Where I can set it?
Thanks
Click to expand...
Click to collapse
press CAMERA+RECORD and Reset at the same time
waiting for popup message
pres Record for select yes/no
press Camera for next selection
and then press message button to confirm selection
hi all!
my phone was root, instant a2sd, then it log in very slow, i was factory reset, it worked.
but when i reset it again, and it can not log on. stop at "android" screen log on. In " download mode" ,i update rom again (v20B_00 and CIS V20B_00), some time, not change, it can not log on. stand by at "android".
any body help me? what can i do? any way to factory reset by windows? script? els..
tks for read!
ps: it not hard reset, "Volume up + HOME + SEARCH" buttons not work, maybe my phone GT made by LG vietnamese.
IMEI :352***-04-31***3-1
anyone can made a file *.bat to plus a code? :
(( - 3845#*540# (factory reset)
- 'Module Test' / 'Stability Test' / 'Enable Root Permission'
- password - :SWIFT::GT540: ))
cause i run unroot.bat it ran and to reset agian.
pls.
I had to do a hardware reset on my tytnII and now it is stuck in the green windows 61 screen telling me
"
The device is clearing the storage please wait", turning off the device after a couple of minutes. Tried the procedure several times, incl. Removing the battery, but no success.
Any solutions would be appreciated!
Goert said:
I had to do a hardware reset on my tytnII and now it is stuck in the green windows 61 screen telling me
"
The device is clearing the storage please wait", turning off the device after a couple of minutes. Tried the procedure several times, incl. Removing the battery, but no success.
Any solutions would be appreciated!
Click to expand...
Click to collapse
You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings - the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.
Important If Encrypt files placed on storage cards is or was enabled before, then backup all files from the storage card before using Clear Storage, hard reset or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.
To perform a hard reset using device keys
1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device.
2. Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
3. Release the two SOFT KEYs, and then press green button (phone icon )the HTC Kaiser TyTN II P4550 Hard reset Soft reset Hardreset Softreset button on your device.
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed. then reFlash with official ROM for kaiser
Thx for the hint, but that is what i did do exactly (= hardware reset !!!), that is after what i did get stuck in the green wndows 61 screen
Have you flashed any hard SPL?
You could try to reflash your stock Windows Mobile ROM by entering bootloader first
1. Find a stock WM rom from htc website
2. Enter bootlader by pressing power + camera + reset button, you will see a tri color screen with "serial" text on the white colored area
3. Connect your usb cable, the "serial" text will be changed into "usb"
4. Finally flash your device, execute the stock rom file that you've found before
Sent from my Android on Kaiser using XDA App
Hello!
I looked around for ages now, and I'm not getting my HD7 unlocked.
As far as I know, there are just 2 Possibilities to unlock the Phone:
1. Chevron WP7
2. WP7-Update-Cab-Sender
As long as I have Version 7392 , I can't use Chevron.
I tested around with the Sender, but every cab I use can't be sended because some Certificate is missing.
This is what it says. Appearently it is in German, but the error code should be the same:
Code:
UpdateWP version 4.8.2345.0
Applying updates to device
Id: \\?\usb#vid_045e&pid_04ec&mi_00#6&2940f84b&0&0000#{ca3d7387-f67b-11da-bbec-8000600fe800}
SN: 930b0693 - 157d256b - e8fa5cac - b1d407b1
Name: HDSiebön
KITLName: QSD8XXX07387240
Manufacturer: HTC
ModelId: 1
Model: HD7 T9292
MobileOperator: O2O-DE
Version: 07.00.07392.03-00.00.00000.00-00.00.00000.00
Der Status Ihre Telefons wird überprüft: Completed in 0,01 seconds
Systemanforderungen werden geprüft: Completed in 0,06 seconds
Updates werden heruntergeladen: Completed in 2,16 seconds
Systemanforderungen werden geprüft: Completed in 0,01 seconds
Updates werden übertragen: Completed in 0,05 seconds
Installation wird vorbereitet: Completed in 2,02 seconds
Error:
Update device 930b0693 - 157d256b - e8fa5cac - b1d407b1 Complete with error code: 800B010A, error message: Es konnte keine Zertifikatkette zu einer ve
rtrauenswürdigen Root-Berechtigung aufgebaut werden.
So my Question is: What am I doing wrong, and how do I get this Working?
I hate not being allowed to have my own Ringtone or Colour or Bluetooth connection or to access the file System or to search my Calendar...
Thanks for helping.
I had my hd7 unlocked on 7392, have you tried downgrading to pre nodo?
No, how do I get it pre Nodo?
(I have the ROM, but how do I get it on my Phone)
Is the Sender working then?
This problem, which I suffer of them too .
plz what i do with this problem .