ok, here is the deal.
I flashed the WM5 to my device (Blue angel-qtek 9090), works great !!
standard the radio rom is 1.13.00
a newer is avail. namely 1.15.00
but (as operah says...)
i'm unable to flash the radio rom to my device, yes i checked the forum and read all the BA items....
any suggestions.
greets
ger (the Netherlands)
Go back to WM2003
You can also use the original Provider Package(here you can replace the RadioRom File).
Try to flash the Radio and then revert to WM5 again.
For me it worked.
Last time I had WM5 onmy device I flashed an new radio to see if it worked (was a VERY long time ago).
Have you followed the wiki Radio 1.15 page ?
Thanks for the info!
downgrading to 2k3, updating the radio to 1.15.00.
after that upgraded to 2k5 again.
thanks
by the way what do you mean by ... VERY long time ago....
gr,
ger
Checked wiki and based on my own updates I come up with November 2005.
i have tried the SSPL and it works, i can flash the 3 roms i have found for the breeze
RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3
RUU_BREE100_1.32.251.1_1.29.00.10_HTC
RUU_BREE100_1.34.251.1_1.38.00.10_HTCEUR_SHIP
but since i flashed the 1.38 radio rom without using this sspl. whenever i use the sspl i can only flash the rom not the radio. my phone is now stuck on the 1.38 radio which drops calls after about 30 mins and the battery life is really crap, i am on area where u get full 2g or 1 bar of 3g so its doing its trademark searching and killing the battery.
I have tried duttys tool with the radio extracted and put on the SD card and flashed but no joy.
my device is not SuperCID i just use the SSPL to bypass it.
anyone got any ideas how i can flash the 1.29 radio or for that fact any radio to phone instead of the rom?
i've read that many have tried 1.20 radio to solve a few problems but i have no idea how i can flash this. I have tried to make my own rom with the tools here but again they just flash the new OS living the radio 1.38.00.10. i am downloading RUU_Radinly_1.20.31.10.exe and will flash it if i knew how. SSPL just turns around and says invalid ID error 244. so its like the radio isn't designed for this device.
anyone got any idea ?
1.29 is even worse than 1.38... Missed calls in full GSM coverage (4 bars), horrible sound quality (either you or called party can't hear most of the conversation)... Don't even try it!
And concerning the problem not being able to flash new radio:
As I already wrote in this thread, flashing Radio ROM 1.29 (and above) also flashes new Radio Bootloader 0108 (different thing than Phone bootloader) which requires SPL 1.09 (or newer) to flash Radio ROMs.
Current SSPL for Breeze is based on some older SPL which, as you found out, isn't compatible. Until someone creates SSPL for Breeze based on SPL 1.09 or SPL 1.10, you're stuck just like me...
thanks very much for the post explaining it. i have read someone might make a new sspl with the new spl's in mind so as you said, we have to wait and i guess i will. i am however going to send my breeze back to HTC because of the constant dropping of calls whether it is 10seconds or 35 mins, it drops it without fail.
Hi, i've bough a p3600 on ebay.
The seller tell me the phone is out because he flash a bad radio version on the phone.
I try to upgrade some file. ( Rom OS, Radio, SPL,etc ...)
I try the splexploit...
BUT ... The phone already stay on startup. i can see HTC startup screen,the windows startup screen ...but never the today screen.
I try hard reset, htc official rom, cookeed rom,...but when i flash a rom with "gsm", the update freeze at 13%
I try with usb and with sdcard..same thing, already stay at 13% !
But if i flash hard spl, 100%, if i flash OS, 100%, just the radio freeze at 13%
Any idea please ?
update
after the boot, i've got a "no gsm" message near the radio version
other people got the same problem like me ...
God oli, help me please
I more or less had the same thing and solved it with the sc card flash page.
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
A rom that works for me to flash it back to the working original
http://www.allaboutphones.nl/forum/request-originele-spv-m700-rom-p3600-rom-t727.html
To download you have to register with them.
GL
Hi, updating the radio to 1.56 crashed, now I have the No gsm message and doesn't boot, running mtty from bootloader with info2 command it says supercid but I can't update any official rom SPA, WWE, ITA... the error is "vender id invalid". I've tried the sd method but returns to bootloader .
Any help will be appreciated.
You should try SSPL : http://forum.xda-developers.com/showthread.php?t=293632
And if it doesn't work the Des' Crash-Proof SPL :
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
and try to flash a radio rom again !
doesn't work
try again and again ...the phone block at 13% ( when the radio upgrade begin) ...
pfffff
I've the same problem and after several attempts without result I sent the phone to the workshop and they told me the problem is with the main board! (this cost almost the price of phone itself). Moreover, I've seen some where here that the problem could be caused by radio chip but I couldnt get the detail.
If you find a solution give me a tip.
i've test lot of thing.
I progress with mtty. but i've got a problem ..i can't downgrade the phone under SPL 1.05.
SPL 1.04 can "reset" the radio, or enter directly to the radio bootloader. With that, i can save my phone.
Try mmty (see the wiki => bootloader info) and with the mfg spl, you can try the method.
Guys,
I've got the same problem...
I've sim and cid unlocked my spv m700 some time ago, using wonderful software from pof. Everything went smooth.
Today I've decided to update radio rom to 1.38.00.11 to enable gps.
I've launched RUU, everything was ok till 44%, when I've got message "Communication error".
After that program tried to recover rom without success, I've got another message "Image corrupted"...
I've tried to reboot my spv (both SR and HR), after rebooting I see:
M 05
B 05 D 1.23
then those symbols disappear and I see only Orange logo.
That's it... The end...
Should I reload radio rom or both rom and radio rom to my DEAD spv? If yes - how?
Please help as I'm very disappointed, frustrated and so on!
Thank you!
Update: A-A-A!!! I did it! I revived my spv! Let me explain how (I'm kinda new to all this rom and and ssl things, so forgive me for mistakes, if there are any):
1 I ran unbrick software. Yesterday it did not work (said, that could not find smth), but today it worked fine.
2 I ran RUU and BINGO! That's it!
BTW, I have vista, but it still worked (I think, thanks to Windows Mobile Device Center, which I have installed).
Also, I killed wmd process in Task manager in the beginning (have read this recommendation somewhere).
Thanks to everybody for their help!
nyco,
could you please explain briefly what you did exactly and which radio and rom you used
thanks and regards
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Thanks stepw...
when I hit task 2A nothing happens.
Original ROM doesnt respond. I flash with cooked ones. Result 100% successful. I restart the phone- hang at boot screen.
stepw said:
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Click to expand...
Click to collapse
Hi,
I'm already under the hard SPL. and "task 2A" not working.
Macars, try only with radio ripped or full original rom (from htc or cooked with radio) because some cooked rom have only OS.
Can you tell me what SPL you have?
Hard SPL?
Have you try splxploit ?
Can you tell me what rom you try oviplokos1 ?
thanks,
it shows SPL 9.99 and with this I cannot flash anything so what I do is to update with splxploit and then the phone changes to SPL 1.2 olipro. With 1.2 I can only flash coocked ROM and will go until the end 100% successful- (original ROM the phone does not respond), but when restarts with newly loaded cooked ROM the phone hangs at window login screen and when put it in bootloader the SPL 9.99 returns again.... the story goes on like this.
I'm becoming mad....
hi,
you can only flash cooked rom because the rom you flash contains only OS. When you flash HTC rom, the rom contains os+radio+spl+....other thing ...
Try this method to downgrade your SPL (9.99) to oli 3.20 :
1°) run splxploit
2°)when the phone reboot on the spl 1.20 oli, run HardSPL 3.20 olipro. (search on the wiki or the trinity forum
3°)upgrade to 3.20 oli ...
Now, when you go to the bootloader, you can see SPL 3.20 oli.
Try reflashing a radio only (see the upgrading topic, you will see radio 1.56.xxxx)
Tell me if this method work.
When i'm on spl 3.20 oli, i can load radio rom to 0%
when I downgrade my phone to spl 1.05, and i can run the upgrading to 7% (best score )
To downgrade to SPL 1.05:
edit the "unbrick.bat" on the splxploit folder.
Replace TRIN_HardSPL.nb to TRIN_SPL105.nb
try to find SPL 1.04. I'm sure if i got the spl 1.04 i can revive the phone
Did exactly as you said final result:
When i'm on spl 3.20 oli, i can load radio rom to 0% (and stays there )
hi,
ok, try to load spl 1.05 with splxploit, and when it is load, run radio upgrade (1.56.xxxx)
Try to find spl 1.04 and mtty it can be reset the radio bootloader
if you find 1.04, give me it
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
macars said:
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
Click to expand...
Click to collapse
arf :/
You got exactly the same problem i have.
did you check if you have bad block (with mtty)
try format the phone with mtty.
i contact pof, but he doesn't answer me
I have a Xperia x1 from vodafone bought today, Now I'm gonna Hard SPL it then microsd flash it with Touch-IT experience 3.01, but Should I do the ROM Touch it flash first or the Radio flash first? and can you explain each step of the way to me? sorry Im a bit thick
Hardspl the phone, then flash the phone, the latest radio is built into it.
WC
1.10.25.18 Is the radio rom I downloaded but didnt install yet. Im still waiting for an answer as not to brick my phone, this is the step Im taking tell me if its correct.
1.Hard SPL the phone
2.Micro sd flash phone with 3.1 Touch It Experience ROM
3.Then micro SD flash it again with the 1.10.25.18 radio rom
If thats not the correct way tell me, Thanks
That radio is included in the rom as it is based off of the X1a NAM original rom. No need to flash radio.
WC
thanks, Now my only problem is finding a Facebook, MSN and Youtube application for it and I cant close activesync on the device it keeps opening
Hello.
First, sorry for my bad English (French guy).
I make a SD flash with a Rom, and something strange occurs: my radio rom version change to 1.16.00.00. I try (always SD flash) to change it with a newer, the process looks good (the download bar increase, the device reboot) but the radio rom version always the same. I try to change OS rom, no problem. I try to change SPL version, impossible: all process executed without error but at the next load of SPL (power-camera-reset) the version is always the same (1.30 Olipro).
I try with another computer (Win XP pro SP2) and with activSync, the problem was the same !
And I try with several rom version, idem.
So to be quick
OS ROM change: no problem
SPL change: impossible
Radio ROM change: impossible
If someone have an idea, I will be very happy
Bye
I find the solution !
Usually, I toogle in SPL mode manually.
The soluce for me was to downgrade the SPL (1.30 to 1.20 olipro) but let the RUU launch is own SPL.
And after, the SPL version was 1.20 and I can change ROM, Radio ROM etc...
[Mode happy ON]
Bye
Hi, can you post the procedure please? I have the same problem!!!
But your pda statup?
Thx
Roby
i don't understand how that is accomplished.
i have read through the trinity guide and that is what they recommended
My trinity has been flashed with 1.3oli and a custom rom but it hangs at the start up page.This makes the device disconnect from the USB.
so how do i let the RUU launch its own SPL?
It is supposed to make the device go into bootloader right? i cant access that since it is hanged
Advice please
Hi bigrockshow,
it is impossible, in this condition that rru launch its SSPL, and it is ipossible to use the method sspl.exe ....
I think that the only way is the splxploit but I don't find a sspl file to load on p3600 with splxploit
anyone have it?
I've exactly the same problem, oli 1.30, I can flash OS roms with no problem but I can't get a radio rom to go past 0%.
I've tried the spl exploit to boot into spl 1.07, I've tried going into the bootloader manually and I've tried letting the RUU load the SPL, no matter what I do I can't shift the radio from 1.16?
Any ideas?
mine is just wierd...
i used SPLxploit and the spl jumps to 3.03...
tried to flash hard SPL and its has error 270...
so i did SPLxploit again...
shows SPL 1.20 now
Tried to flash another rom and it still doesnt work..
did i miss something or is my dopod screwed...
You can't upgrade to the 1.56.70.11 Radio with Olipro 1.3. It looks like it's worked and gets to 100% on mine but doesn't actually change anything. I ended up using another HardSPL (can't remember the name now) to get the 1.56.70.11 Radio on there.
I looked for ages for a version of Olipro 1.2 but couldn't find one anywhere. Apparently it works ok with that version.
Sometimes these threads are really hard to follow when they get massive and the author updates the first posts and over writes stuff. I think they should all keep old stuff in there and just add too it instead of replacing information.