So as I finished a phone conversation, i pressed the power button once (sleep), then pressed it again...then all of a sudden my phone went weird on me!
It went "Rainbow Screen" on me... a red, green, blue & white stripe appeared with the word "serial" on the white part and the words:
"
KAIS1*0
SPL-1.56.0000
CPLD-8
"
what could that mean?!?
I tried doing a hard reset but it would just go right back to the screen
I tried plugging it to the computer but the word "serial" would just turn into "USB" and would do nothing else...
what could be going wrong!?! I don't even know what I did...
any help would be great!! thanks!
mokotoy said:
So as I finished a phone conversation, i pressed the power button once (sleep), then pressed it again...then all of a sudden my phone went weird on me!
It went "Rainbow Screen" on me... a red, green, blue & white stripe appeared with the word "serial" on the white part and the words:
"
KAIS1*0
SPL-1.56.0000
CPLD-8
"
what could that mean?!?
I tried doing a hard reset but it would just go right back to the screen
I tried plugging it to the computer but the word "serial" would just turn into "USB" and would do nothing else...
what could be going wrong!?! I don't even know what I did...
any help would be great!! thanks!
Click to expand...
Click to collapse
You need to reflash your rom and read this thread.
http://forum.xda-developers.com/showthread.php?t=423486
Related
I just got my diamond and booted it for the first time, and it's stuck on a screen that has a 4 horizantal bars, red, green, blue, and white from top to bottom, with the text DIAM100 64M SPL-1.35.0000 MicroP-Diam (LED) v11 PSOC-Diam STAGE_PVT v0x30...
Can't turn it off... Help please
Ok so I just tried unplugging it and the word "Serial" appeared on the bottom bar... I don't know if I imagined that it wasn't there before or not. I plugged it back in and it's still there... How do I hard reset?
Ok, I googled how to soft reset it and this seemed to solve the problem.. But what happened?
you hit the volume down button while turning the phone on. This way you can enter the bootloader, keep following the white rabbit and you'll get in wonderland (be warned, it's highly addicting).
I haven't really used my Kaiser in a while.
Today I decided to turn it on and what I get is this screen and it says:
KAIS1*0
SPL-3.29.Hard
CPLD-8
Serial
I haven't messed with this phone in a long time but I did upgrade the room a long time ago. Forgive me if it is a stupid question, but this surprised me.
Oh i tried reseting and hard reseting but nothing seems to work....
Thanks
Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here
If still have problems after read info, post in that thread.
Thread closed.
Hi!
I have a tytn 11 that have worked perfekt under a year and for a week ago i restarted it and now the screen is red, green, blue and white, on the red color is says KAIS130 SPL-1.93.0000 CPLD-8 and i cant get pass it. i did try to hard reset and to soft reset but nothing is happening. any help would be helpful.
jimqa said:
Hi!
I have a tytn 11 that have worked perfekt under a year and for a week ago i restarted it and now the screen is red, green, blue and white, on the red color is says KAIS130 SPL-1.93.0000 CPLD-8 and i cant get pass it. i did try to hard reset and to soft reset but nothing is happening. any help would be helpful.
Click to expand...
Click to collapse
Hi there, welcome to the forums. Check the following link http://forum.xda-developers.com/showthread.php?t=423486. Let us know if that helps.
everytime i factory reset and reboot on my g1 a red green blue and white screen comes up with serial0 in the middle, not sure what to do, any help?
xava44 said:
everytime i factory reset and reboot on my g1 a red green blue and white screen comes up with serial0 in the middle, not sure what to do, any help?
Click to expand...
Click to collapse
sounds like you have no recovery.. is your device rooted? try holding home and power to turn it on (when its powered off of coarse)
ive tried that, it goes straight to the same creen with serial0 in the middle
oOo uhhhhmmmmm i dunno if that means its bricked..? i hope not.. wat have you tried so far? and wat else does it say when you get it on? it only says serial 0??
anything i try to do, it ends up at the screen that i said before with 4 different setions horizontally, red, green, blue and white. on the red portion there are yellow letters that read as such:
"DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.23.02
SEP 2 2008"
then on the middle of there is a white strip across that says "serial0" in black letters and thats all.
i havent tried much, just read a few suggestions on other websites with different button combos to get it to work but they didnt. i also took it to the t-mobile store and the guy who helped me did a factory reset and when he rebooted it, it went straight back to this screen and he said he didnt know what to do
xava44 said:
anything i try to do, it ends up at the screen that i said before with 4 different setions horizontally, red, green, blue and white. on the red portion there are yellow letters that read as such:
"DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.23.02
SEP 2 2008"
then on the middle of there is a white strip across that says "serial0" in black letters and thats all.
i havent tried much, just read a few suggestions on other websites with different button combos to get it to work but they didnt. i also took it to the t-mobile store and the guy who helped me did a factory reset and when he rebooted it, it went straight back to this screen and he said he didnt know what to do
Click to expand...
Click to collapse
hmmm... try to flash this nbh file.. jus boot up into that screen like usual and have this file on root of sd card. than when it powers up it should say something about an update.. press what it says to press to apply the update.. ( just incase turn the phone on by holding camera button and power button)
http://www.4shared.com/file/9SCWX8Id/DREAIMG.html
i tried that, the update will complete and tell me to press the track ball but when i do it goes right back to that colored screen then the update just comes up again
Hi,
I just tried to boot my HD7 and all I get is the ugly Red, Green, Blue and White Screen of death with following message:
In red area on top of screen:
PD2100 SS_BC (4)
SPL-1.69.2250.0(117833)MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
Green area:
SD SANDISK 7580MB Class0
Partition info-v211v413
Blue area:
is empty
White area at the bottom of the screen shows USB in the middle when I connect it to PC and SERIAL when I connect it to charger?!?
Need some help desperately..
Teo
Suddenly it works again, don't ask me how because I don't know, didn't do anything especially, just smashed it on the floor... .. two times
10X anyway,
Teo
I believe that was your bootloader
Sent from my HD7 using XDA Windows Phone 7 App
The multicolored screen would be your bootloader screen that you enter in order to flash a stock rom. Perhaps your volume button caved in during the accident? The bootloader is accessed by holding down the volume down button and pressing the power button.
lol thats your bootloader, holding the camera key down while powering on is bootloader
Netko Drugi said:
Suddenly it works again, don't ask me how because I don't know, didn't do anything especially, just smashed it on the floor... .. two times
Click to expand...
Click to collapse
I LOL´d so hard