I haven't really used my Kaiser in a while.
Today I decided to turn it on and what I get is this screen and it says:
KAIS1*0
SPL-3.29.Hard
CPLD-8
Serial
I haven't messed with this phone in a long time but I did upgrade the room a long time ago. Forgive me if it is a stupid question, but this surprised me.
Oh i tried reseting and hard reseting but nothing seems to work....
Thanks
Kaiser Stuck at Bootloader (aka Tri Color or Red, Green, Blue Screen)? Solutions Here
If still have problems after read info, post in that thread.
Thread closed.
Related
HI Folk
got a problem unlockin' a TILT using the Super CID tool...it doesn't work...gets stuck on first screen...is it the most efficient way available?
NO HSDPA PANEL IN CONNECTIONS TAB on a ATT tilt...but IN there in HTC with WM6 PRO
Does this happen?
1. Make sure you installed HardSPL as follows: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
Click to expand...
Click to collapse
do you get SPL-1.0 OliPof?
tried many times...but doesn't work
it gets stuck on white screen...with percentage bar....(doing this via usb) still on SPL 1.56...luckily reboots ok!
well for me everything ran fine except for it never displayed "Security unlocked" at bootloader while running wm6.1. However once i downgraded to wm6 everything worked fine ... see if this helps you
ReverseImage said:
it gets stuck on white screen...with percentage bar....(doing this via usb) still on SPL 1.56...luckily reboots ok!
Click to expand...
Click to collapse
Using Vista ??
It Was Tough
but after a day & half.....and many tries...had to dig a lot to find solutions
Thanks Everyone
Mod Note: This question should have been posted in the SIMunlocker thread in the ROM Development Forum.
New thread for existing issue is a no-no.
Yesterday I took my battery out of my phone to remove the dust from inside the phone. When i replaced the battery back into the phone, it booted up into the tri-color screen and has been there ever since. I haven't modified the phone since receiving it from AT&T at all. When i actually noticed the problem I tried to reset the phone through the hole on the bottom of the phone. At first, it booted up normally but was out of batteries since it had been running on a bright screen for a couple of hours. Thus it turned off immediately. I have tried to reset it again but it seems to do nothing. Since then when I put the battery back in and I turn the phone on it returns to the tri-colored screen and it says SERIAL in the bottom white area. When plugged into my computer it says USB in the white area. On the top of the tri colored screen, in the red area, it says:
KAIS1*0
SPL-1.56.0000
CPLD-8
I thought about downloading the newest ROM update from HTC but my phone wont sync with my computer, and the tutorial says it needs to in order to install properly. If anyone could help, please let me know!
Update!
I put the battery back into the phone and it booted up just fine....it was a little slow and worked normally for a couple of minutes. Soon it started to act up. When i plugged the phone into my computer it automatically started to freeze, when i unplugged it from the computer it would work just fine! I then turned my phone off again and now it is back to the tri-color screen again!
try hard-resetting the phone.
To do this, hold down the two soft keys at the front while pushing the stylus into the reset hole. Just make sure to back up any data you want, as it will delete it all (files, contacts, etc.)
Tried a Hard Reset
When I finished it, it just went back to that tri-colored screen. Now the phone will turn on every 10th time i try and work for a couple of minutes. When the screen turns off it wont turn back on when i push the power button. The green light still blinks though.
I have been having this exact same problem for a little while now, any help would be more than appreciated.
EDIT: Everything about the phone was AT&T stock ROM from Oct. '07.
i think it replacement time
hi all once again.i was using my kaiser yesterday then my phone went into tri screen.tried hard reset soft reset.phone reboots in tri screen.im using Duttys Official WM6.1 Rom 5.2.19716 UC.
ihave kais130 mfg /spl 1-0.0lipof /cpld-8 on screen.
if there is a solution to this i would appreciate help in resolving.thanks in advance
Another sad update!
Well as of this second my phone works okay...slower than usual....but in an hour or so the screen will turn off and the phone will stop working, i will take the battery out.....wait about 45 minutes and hope that it boots up normally. No one has any idea why this is happening to multiple people? I have had this phone for maybe 3-4 months. Is the failure rate that broad and fast on these phones???
WTF
This phone is ridiculous. Now if I keep the phone plugged into my computer so the screen wont time off, the phone works just as normal. The moment I unplug the phone from charging it decides to die on me after an hour or so!
this happened to me last nite.
spent hours and hours trying to fix.
ended up reflashing orig att rom..
everything is fine..
proceeded on to a cooked rom and all is well..
added some apps ..
so far -- awesome
Good News!
Magically my phone started syncing with my computer randomly. Thus it allowed me to flash the rom with the original ATT rom and so far my phone is back to normal working great!
tri screen sorted
i bought my kaiser off ebay..i couldnt sort tri screen.i had various roms on at various times .i had no warranty. on pay as you go.decided to take to local o2 shop.got it back today fully working for free.took them 8 days.
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
You better take a look here for a solution : http://forum.xda-developers.com/showthread.php?t=423486
jezzaflyboy said:
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
Click to expand...
Click to collapse
So as I finished a phone conversation, i pressed the power button once (sleep), then pressed it again...then all of a sudden my phone went weird on me!
It went "Rainbow Screen" on me... a red, green, blue & white stripe appeared with the word "serial" on the white part and the words:
"
KAIS1*0
SPL-1.56.0000
CPLD-8
"
what could that mean?!?
I tried doing a hard reset but it would just go right back to the screen
I tried plugging it to the computer but the word "serial" would just turn into "USB" and would do nothing else...
what could be going wrong!?! I don't even know what I did...
any help would be great!! thanks!
mokotoy said:
So as I finished a phone conversation, i pressed the power button once (sleep), then pressed it again...then all of a sudden my phone went weird on me!
It went "Rainbow Screen" on me... a red, green, blue & white stripe appeared with the word "serial" on the white part and the words:
"
KAIS1*0
SPL-1.56.0000
CPLD-8
"
what could that mean?!?
I tried doing a hard reset but it would just go right back to the screen
I tried plugging it to the computer but the word "serial" would just turn into "USB" and would do nothing else...
what could be going wrong!?! I don't even know what I did...
any help would be great!! thanks!
Click to expand...
Click to collapse
You need to reflash your rom and read this thread.
http://forum.xda-developers.com/showthread.php?t=423486
Hi!
I have a tytn 11 that have worked perfekt under a year and for a week ago i restarted it and now the screen is red, green, blue and white, on the red color is says KAIS130 SPL-1.93.0000 CPLD-8 and i cant get pass it. i did try to hard reset and to soft reset but nothing is happening. any help would be helpful.
jimqa said:
Hi!
I have a tytn 11 that have worked perfekt under a year and for a week ago i restarted it and now the screen is red, green, blue and white, on the red color is says KAIS130 SPL-1.93.0000 CPLD-8 and i cant get pass it. i did try to hard reset and to soft reset but nothing is happening. any help would be helpful.
Click to expand...
Click to collapse
Hi there, welcome to the forums. Check the following link http://forum.xda-developers.com/showthread.php?t=423486. Let us know if that helps.
Hello,
This is my first thread on XDA, because i'm having a problem with my Kaiser.
I'm sorry for my possible "silly" questions, but this a subject wich i'm not very good at.
I have a Kaiser, wich has a TPC Elite Rom Series
R 1.70.19.09
g 25.83.40.02h
d 3.28.00.00
And that runs on WM 6.5
Since last friday while i was configuring my mms settings, the device asked me to restart to assume the new settings. So i closed it down by pressing the power button until the message to "shut it down" appeared.
But when i tried to turn it on again, the device starts with the TPC Elite Rom Series screen, then it appears the data from the rom (mentioned above), then it moves to a screen with the Windows Phone message and logo and it stays here until i turn it off again.
So i cannot start my Kaiser and i need all the help i can get.
Thanks a lot to all of you that can give me a hand.
I already have done hard reset, but it keeps freezing on the "windows phone" screen.
try into three-colour screen and reflash ROM,or look here http://forum.xda-developers.com/showthread.php?t=423486
goodluck!
try into three-colour screen and reflash ROM,goodluck
this is also my first post here, can someone please help.
i tried to hardspl my htc kaiser, and failed miserably. i went through all the steps for hardspl but somewhere failed. during the setup when running the kaiser ruu file.on the cpu it said it was complete and for me to look to the phone to finish setup. on the phone it showed the linux penguin and a list of words scrolling down the screen. then it said error insert sd card. so i did then more words scrolled down the screen. then it said error again then the screen went black. after waiting an hour and nothing happened i took the battery out. then i tried to reload and the att logo would only show up. i read online how to get the tri colored screen back up and i got that by pressing the camera and power and reset button in.on the screen it says
kais1*0
spl-3.56.0000
cpld-8
and it doesnt respond to the computer. how do i re flash and get my phone working again someone please help if you can thank you