Hi,
I just tried to boot my HD7 and all I get is the ugly Red, Green, Blue and White Screen of death with following message:
In red area on top of screen:
PD2100 SS_BC (4)
SPL-1.69.2250.0(117833)MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
Green area:
SD SANDISK 7580MB Class0
Partition info-v211v413
Blue area:
is empty
White area at the bottom of the screen shows USB in the middle when I connect it to PC and SERIAL when I connect it to charger?!?
Need some help desperately..
Teo
Suddenly it works again, don't ask me how because I don't know, didn't do anything especially, just smashed it on the floor... .. two times
10X anyway,
Teo
I believe that was your bootloader
Sent from my HD7 using XDA Windows Phone 7 App
The multicolored screen would be your bootloader screen that you enter in order to flash a stock rom. Perhaps your volume button caved in during the accident? The bootloader is accessed by holding down the volume down button and pressing the power button.
lol thats your bootloader, holding the camera key down while powering on is bootloader
Netko Drugi said:
Suddenly it works again, don't ask me how because I don't know, didn't do anything especially, just smashed it on the floor... .. two times
Click to expand...
Click to collapse
I LOL´d so hard
Related
So as I finished a phone conversation, i pressed the power button once (sleep), then pressed it again...then all of a sudden my phone went weird on me!
It went "Rainbow Screen" on me... a red, green, blue & white stripe appeared with the word "serial" on the white part and the words:
"
KAIS1*0
SPL-1.56.0000
CPLD-8
"
what could that mean?!?
I tried doing a hard reset but it would just go right back to the screen
I tried plugging it to the computer but the word "serial" would just turn into "USB" and would do nothing else...
what could be going wrong!?! I don't even know what I did...
any help would be great!! thanks!
mokotoy said:
So as I finished a phone conversation, i pressed the power button once (sleep), then pressed it again...then all of a sudden my phone went weird on me!
It went "Rainbow Screen" on me... a red, green, blue & white stripe appeared with the word "serial" on the white part and the words:
"
KAIS1*0
SPL-1.56.0000
CPLD-8
"
what could that mean?!?
I tried doing a hard reset but it would just go right back to the screen
I tried plugging it to the computer but the word "serial" would just turn into "USB" and would do nothing else...
what could be going wrong!?! I don't even know what I did...
any help would be great!! thanks!
Click to expand...
Click to collapse
You need to reflash your rom and read this thread.
http://forum.xda-developers.com/showthread.php?t=423486
Hi, I received an unlock code and I followed the directions.
I put in my T-Mobile sim card and started my Atrix HD. When it finished loading, it went to this grey background screen that asked for the unlock code with either option of "Enter"ing or "Dismiss"ing. I inputted my code, and pressed Enter to unlock it. After that, the two options disappeared as well as the bar for entering the code, but stayed on that same grey background screen with nothing but that and the time, signal strength, battery life, etc. on the top of every android. About 5 seconds later, my phone picked up T-mobile and was finally unlocked (I was getting texts, etc), but it was still on the grey background screen. I've been waiting for over 2 hours now, and it is still stuck on the grey screen. I have tried pressing the home button, the back button, and the tabs button, but none of them does anything and stays on the grey screen. I am able to turn the screen off and on and adjust the sound with the physical buttons, and everything works at the locked screen. When I try unlocking the screen, opening the camera, opening the phone or text, it all goes back to the grey screen. Also when I try turning off the phone with the physical button, no option of powering off appears on screen, it just stays on the grey screen.
Help! How do I get rid of this grey screen. I have not tried restarting because I do not know how to restart the phone without being given the option by pressing the power button. I've held the power button, but that did nothing.
Solution
themare said:
Hi, I received an unlock code and I followed the directions.
I put in my T-Mobile sim card and started my Atrix HD. When it finished loading, it went to this grey background screen that asked for the unlock code with either option of "Enter"ing or "Dismiss"ing. I inputted my code, and pressed Enter to unlock it. After that, the two options disappeared as well as the bar for entering the code, but stayed on that same grey background screen with nothing but that and the time, signal strength, battery life, etc. on the top of every android. About 5 seconds later, my phone picked up T-mobile and was finally unlocked (I was getting texts, etc), but it was still on the grey background screen. I've been waiting for over 2 hours now, and it is still stuck on the grey screen. I have tried pressing the home button, the back button, and the tabs button, but none of them does anything and stays on the grey screen. I am able to turn the screen off and on and adjust the sound with the physical buttons, and everything works at the locked screen. When I try unlocking the screen, opening the camera, opening the phone or text, it all goes back to the grey screen. Also when I try turning off the phone with the physical button, no option of powering off appears on screen, it just stays on the grey screen.
Help! How do I get rid of this grey screen. I have not tried restarting because I do not know how to restart the phone without being given the option by pressing the power button. I've held the power button, but that did nothing.
Click to expand...
Click to collapse
Nevermind! I found the answer to own question. Since the lock screen still works, I just went to the lock screen and without unlocking the screen, I pressed the power button and the power off options appeared on the lock screen. So I was able to restart my phone that way. The grey screen is gone after I restarted. Hope this helps.
themare said:
Nevermind! I found the answer to own question. Since the lock screen still works, I just went to the lock screen and without unlocking the screen, I pressed the power button and the power off options appeared on the lock screen. So I was able to restart my phone that way. The grey screen is gone after I restarted. Hope this helps.
Click to expand...
Click to collapse
Yes, i faced the same thing and had to reset phone!
How did you reset?
Im encountering the same problem after entering an unlock code... except that I do not have acces no any other options on my phone.
I introduced the unlock code and now I have a grey screen...
Any ideas?
marcelarr said:
Im encountering the same problem after entering an unlock code... except that I do not have acces no any other options on my phone.
I introduced the unlock code and now I have a grey screen...
Any ideas?
Click to expand...
Click to collapse
Just press the power button once (without holding it) like you're locking the phone. The screen will turn black, now press it again, you'll see the lockscreen now press and hold the power button till you see the power off option coming up.
Sent from my MB886 using Tapatalk 2
Sorry to double post but I have a major issue with my One Developer Edition. I tried to run the RUU after relocking my bootloader and I have the HTC surrounded by triangles with exclamation points.
I cant get off of this screen. PLEASE HELP.
Hold the vol - + Power Key imeadly when the Back and home button lights wait........ not release the keys press with nose the home button
There are no lights flashing. Just the HTC Logo in the middle of a black screen with triangles with exclamation points in them in the corners.
garment69 said:
There are no lights flashing. Just the HTC Logo in the middle of a black screen with triangles with exclamation points in them in the corners.
Click to expand...
Click to collapse
Can you not get into your boot loader by holding down power until phone turns off and then vol- and power?
an0ther said:
Can you not get into your boot loader by holding down power until phone turns off and then vol- and power?
Click to expand...
Click to collapse
No. When I hold the power down, the screen goes off. I then hold volume down and nothing happens. I just wind up back at the black screen with the HTC logo and triangles.
garment69 said:
No. When I hold the power down, the screen goes off. I then hold volume down and nothing happens. I just wind up back at the black screen with the HTC logo and triangles.
Click to expand...
Click to collapse
I ran the RUU again and it came back to life.
Thanks for all those who tried to help.
or put usb kabel in pc and hold vol- and power or unplug the usb cabel and test it
Yup
garment69 said:
I ran the RUU again and it came back to life.
Thanks for all those who tried to help.
Click to expand...
Click to collapse
I know this is an old thread but I wanted to reaffirm that the solution for me was to "fastboot oem rebootRUU" again and then the firmware I was attempting to update. Run twice and then "fastboot reboot".
The initial firmware update failed on one of the radio portions and phone would only boot to HTC logo with the corner triangle exclamations. When the USB cable was pulled during this screen it would show the white bootloader screen but the text wasn't complete.
I genuinely thought I had bricked it. But all good now.
Hello everyone!
I was recently given a very unresponsive Huawei Ascend P7 (model L10). I get very little response out of it, but due to the powerled reacting, I think it's a hard-brick and not a broken phone.
When I use power+volume up, the led blinks 15 times: red, red, red, red, green (x3)
When I use power+volume down, the led immediately (doesn't require long holding) blinks: red, red, red (pause) x3
When I hold the power button (powercycle), I get the same pattern as power+vol up: red, red, red, red, green (x3)
Connecting the phone to my PC doesn't do anything. It has ADB drivers installed but no software to discover broken phones (not sure which program to use). HiSuite doesn't find the phone, no matter what.
Can anyone point me in the direction of usable software/a solution?
Edit: I have (of course) sought around, but have no solution yet.
Thanks so much, in advance,
L
I had the same problem last week.
Is your bootloader locked?
lrpvo said:
Hello everyone!
I was recently given a very unresponsive Huawei Ascend P7 (model L10). I get very little response out of it, but due to the powerled reacting, I think it's a hard-brick and not a broken phone.
When I use power+volume up, the led blinks 15 times: red, red, red, red, green (x3)
When I use power+volume down, the led immediately (doesn't require long holding) blinks: red, red, red (pause) x3
When I hold the power button (powercycle), I get the same pattern as power+vol up: red, red, red, red, green (x3)
Connecting the phone to my PC doesn't do anything. It has ADB drivers installed but no software to discover broken phones (not sure which program to use). HiSuite doesn't find the phone, no matter what.
Can anyone point me in the direction of usable software/a solution?
Edit: I have (of course) sought around, but have no solution yet.
Thanks so much, in advance,
L
Click to expand...
Click to collapse
follow my post, connect the phone to the pc when it's powered off and then click (vol- )+(power button) http://forum.xda-developers.com/showthread.php?p=62810789
Hi everybody,
yesterday I found my X620 with a black screen. I can power off and on by long-pressing the power button, but after the LeEco logo the screen goes black (but it's on, just showing only the black color).
I tried to power+volup but after the initial screen with written "recovery mode" it goes the same way.
I can also get to the fastboot screen with power+voldown and fastboot.exe devices can find it.
I have a backup of the rom mounted by the reseller but I really don't know what to do with it.
Can some give me an help? Sorry, I'm a newbie...
Thank you
KuRLiC