Sorry to double post but I have a major issue with my One Developer Edition. I tried to run the RUU after relocking my bootloader and I have the HTC surrounded by triangles with exclamation points.
I cant get off of this screen. PLEASE HELP.
Hold the vol - + Power Key imeadly when the Back and home button lights wait........ not release the keys press with nose the home button
There are no lights flashing. Just the HTC Logo in the middle of a black screen with triangles with exclamation points in them in the corners.
garment69 said:
There are no lights flashing. Just the HTC Logo in the middle of a black screen with triangles with exclamation points in them in the corners.
Click to expand...
Click to collapse
Can you not get into your boot loader by holding down power until phone turns off and then vol- and power?
an0ther said:
Can you not get into your boot loader by holding down power until phone turns off and then vol- and power?
Click to expand...
Click to collapse
No. When I hold the power down, the screen goes off. I then hold volume down and nothing happens. I just wind up back at the black screen with the HTC logo and triangles.
garment69 said:
No. When I hold the power down, the screen goes off. I then hold volume down and nothing happens. I just wind up back at the black screen with the HTC logo and triangles.
Click to expand...
Click to collapse
I ran the RUU again and it came back to life.
Thanks for all those who tried to help.
or put usb kabel in pc and hold vol- and power or unplug the usb cabel and test it
Yup
garment69 said:
I ran the RUU again and it came back to life.
Thanks for all those who tried to help.
Click to expand...
Click to collapse
I know this is an old thread but I wanted to reaffirm that the solution for me was to "fastboot oem rebootRUU" again and then the firmware I was attempting to update. Run twice and then "fastboot reboot".
The initial firmware update failed on one of the radio portions and phone would only boot to HTC logo with the corner triangle exclamations. When the USB cable was pulled during this screen it would show the white bootloader screen but the text wasn't complete.
I genuinely thought I had bricked it. But all good now.
Related
My HD7 is stuck on the start-up HTC screen. If left for a few mins. it goes to the screen showing Phone- USB cable -PC and thats it.
I tried hard reset: volume up/down held down + power on/off. No matter how long I hold these buttons down it does not go to the boot loader screen, infact it goes to the same screen as mentioned Phone-USB-PC.
When I hold down volume button + camera +power on/off the tri-colour screen appears for a few seconds but then does to the white screen saying "Enter USB Host Mode"
Zune comes up with error C101002E and trying to flash it with O2 rom the error 260, no comms
Can I do anything to restore this?
I've just found out it has no memory card! Would this stop it from booting past the start-up screen?
Yes I bought it as faulty, so I thought a reset would do it. Its not dead, far from it but I just need pointing in the right direction
Hold volume up + down at the same time and click power once while continuing to hold BOTH volume buttons...
If that doesn't work and u haven't hacked ur fone ibwould call for a replacement .... I'm sending mine back cuz mine is constantly freezing and rebooting by itself
Sent from my HTC Glacier using XDA App
I tried to update my rooted HTC One but it seems that something went wrong. The phone will not boot. When I hold down the power button the home and back buttons start to flash. I have tried to boot into the bootloader by holding the power button until the home and back buttons stop flashing but all that does is turn the red LED on and the screen stays black. How do I fix this so I can use my phone again?
EveryDayDavid said:
I tried to update my rooted HTC One but it seems that something went wrong. The phone will not boot. When I hold down the power button the home and back buttons start to flash. I have tried to boot into the bootloader by holding the power button until the home and back buttons stop flashing but all that does is turn the red LED on and the screen stays black. How do I fix this so I can use my phone again?
Click to expand...
Click to collapse
The buttons are supposed to flash when you hold down the power button. After the buttons stop flashing, quickly release and then hold the power + vol down buttons. That should work unless something really got messed up.
adb
EveryDayDavid said:
I tried to update my rooted HTC One but it seems that something went wrong. The phone will not boot. When I hold down the power button the home and back buttons start to flash. I have tried to boot into the bootloader by holding the power button until the home and back buttons stop flashing but all that does is turn the red LED on and the screen stays black. How do I fix this so I can use my phone again?
Click to expand...
Click to collapse
ADB isn't working?
So, i shut down the phone and when i booted it it was stuck at the bootloader. The power button doesn't work,the volume down button doesn't work and the phone is not recognized by the pc(windows 8.1). Idont know what to do.
Ukaz said:
So, i shut down the phone and when i booted it it was stuck at the bootloader. The power button doesn't work,the volume down button doesn't work and the phone is not recognized by the pc(windows 8.1). Idont know what to do.
Click to expand...
Click to collapse
Maybe the volume button is stuck down. Play with it try again. I'd it goes back to boot loader try rebooting to system from menu.
Sent from my Nexus 5 using XDA Free mobile app
Ukaz said:
So, i shut down the phone and when i booted it it was stuck at the bootloader. The power button doesn't work,the volume down button doesn't work and the phone is not recognized by the pc(windows 8.1). Idont know what to do.
Click to expand...
Click to collapse
your phone is physically broken ...why did you think we could help, Theirs no magic software fix for broken power and volume buttons
But button was working just before i shut it down. In fact if i hold down the power button something happens a sort of reboot to the bootloader).
Ukaz said:
But button was working just before i shut it down. In fact if i hold down the power button something happens a sort of reboot to the bootloader).
Click to expand...
Click to collapse
That's pretty strange, most time it's working or it's not
did you try holding the phone under a bright light and holding the power down for 20 seconds
Yes and there is short black screen and then back to the bootloader
Ukaz said:
Yes and there is short black screen and then back to the bootloader
Click to expand...
Click to collapse
well if it stays in the bootloader you could relock and flash a RUU
I HAVE THAT SAME EXACT PROBLEM!! My HTC One M7 was working completely fine until the battery died earlier this evening. I charged and switched it on (without pressing the volume down button, just the power button) but it seemed to have entered the bootloader. But while in there, only the volume up button works, neither the power button nor the volume down button worked (though I never had any issues with them prior to today!) So now I'm stuck in this screen. Doesn't help if I shut it down or let the battery drain then recharge it. It's just stuck here...
If anyone's got ideas on how to solve this, please do let me know
BandicootUK. Did you find a solution? I'm having the same problem.
Hi
i have this motorola razr i xt890.
it freezes on me and i tried to reset it by pressing vol- + power button.
But now it just stuck on black screen and only green led comes on the top left.
as shown in pic attached.
Any body can HELP?
mobishack said:
Hi
i have this motorola razr i xt890.
it freezes on me and i tried to reset it by pressing vol- + power button.
But now it just stuck on black screen and only green led comes on the top left.
as shown in pic attached.
Any body can HELP?
Click to expand...
Click to collapse
Hold volume - / volume + / Power-button (all 3 buttons) simultaneously for about 10 sec. Let it reboot.
No luck tried this
Hazou said:
Hold volume - / volume + / Power-button (all 3 buttons) simultaneously for about 10 sec. Let it reboot.
Click to expand...
Click to collapse
Tried this already no luck, if i hold power button for few secs, the green light goes off but still phone don't turn on at all.
mobishack said:
Tried this already no luck, if i hold power button for few secs, the green light goes off but still phone don't turn on at all.
Click to expand...
Click to collapse
What if u try it again. Hold all 4 buttons, while the phone is connected to power for 10sec. After that release the power and volume up button. So u hold volume down all the time. See what happens.
Hello there, sorry for this resurrection but I have the same problem, black screen, green led on, but nothing more, no fastboot, no recovery, no logos, no vibration, nothing.
Is there any solution for this? I've tried power button + volumen down in many ways and nothing seems to work.
Thanks in advance!
aquilesboy said:
Hello there, sorry for this resurrection but I have the same problem, black screen, green led on, but nothing more, no fastboot, no recovery, no logos, no vibration, nothing.
Is there any solution for this? I've tried power button + volumen down in many ways and nothing seems to work.
Thanks in advance!
Click to expand...
Click to collapse
You can only try to flash ifwi and dnx as I did but I also had no success and also Moto themselves couldn't fix the phone.
If your phone is still in warranty it will get replaced, otherwise you can throw it away.
i had this problem when my battery was deeply unloaded. i had to load it with an powersource with 1A and a factory cable. that worked for me...
Help ,, please emergency !!!!
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. Please help.
My phone was charging then it automatic restart and stuck at HTC One boot screen with the orange light on. I couldn't power off or do anything. I have tried to hold power button 20 sec nothing happen it just stood there please help. I can't get to boot option either because i can't turn off my phone .
The orange light was still on when i uncharged the phone please help Thank
Been 3 hour and the phone still in the same condition :\
Edit: Solved All i have to do is put my phone under a bright light then hold power+volume down.
rygart112 said:
My phone was charging then it automatic restart and stuck at HTC One boot screen with the orange light on. I couldn't power off or do anything. I have tried to hold power button 20 sec nothing happen it just stood there please help. I can't get to boot option either because i can't turn off my phone .
imgur. com/XEBB2Lc << The orange light was still on when i uncharged the phone please help Thank
Click to expand...
Click to collapse
try with power and vol down at the same time
alray said:
try with power and vol down at the same time
Click to expand...
Click to collapse
Thanks, tried it nothing happen
rygart112 said:
Thanks, tried it nothing happen
Click to expand...
Click to collapse
strange, normally you should be able to reboot it in bootloader mode by using power and volume down. Is it detected when connected to a computer?
alray said:
strange, normally you should be able to reboot it in bootloader mode by using power and volume down. Is it detected when connected to a computer?
Click to expand...
Click to collapse
No, i don't know why but it not detect when i connect to computer.
Edit: It does detect but it can't install driver