Database Develop

Paint rubbing off on corner

My phone is a couple of weeks old and the paint on one corner has already rubbed (or has been scratched) off leaving the shiny aluminum exposed. Has anyone else got this issue or have any bright ideas to restore the matt black color? I tried a Sharpie but it didn't stick.

mbridges30 said:
My phone is a couple of weeks old and the paint on one corner has already rubbed (or has been scratched) off leaving the shiny aluminum exposed. Has anyone else got this issue or have any bright ideas to restore the matt black color? I tried a Sharpie but it didn't stick.
Click to expand...
Click to collapse
Humm, this is worrying. I hope it's a fluke

Got a spot of aluminium as well in the top left corner.
Only 1mm in diameter, but still... not too good after about 10 days of use.

WoW... I hope these are just two isolated cases, or some bad serie...
Believe me, if this happens to mine, it will be the very last time I buy a HTC. You can write my words in stone.
HastaSSSS

Not good news!! I had this same problem with my HTC 3600P... it looked like crap after 6 months... crap black finish rubs off easy.. specially if in a humid country like jamaica.. really really bad news for the diamond! thanks guys.. will keep a close eye on it and try and get a case of it ASAP.
C

I have also got paint rubbing off both top corners, it's slowly getting worse. Not happy!!! Few weeks old. Any body know a good paint match? Think I could fix it..

Im sure that having your keys and coins in the same pocket with your phone it will get scratched.

Can't make out the corners of mine through the fingerprints even though every night I wipe my fingers on my jeans after my chips! What about proper Indian ink?

I had to something about it on mine...
Fine/Ultra Fine Black Sharpie Permanent Marker has done the job..

...does NOT sound good, I had this problem with my Trinity and it really looked a mess. I hope HTC read this post and maybe.... even say something about it? or would i be dreaming?

some pictures maybe?

vas79 said:
I had to something about it on mine...
Fine/Ultra Fine Black Sharpie Permanent Marker has done the job..
Click to expand...
Click to collapse
Forget the Sharpie people it comes off in 2 days!!...

same has happened to mine, metal finish has worn off on top right corner, have tried permanent marker and also a little tin of humbrol satin black enamel paint which worked the best, but even that rubs off!!! gotta say im dissapointed with the finish of the phone, my touch dual still looks new after 6 months.

Hmm you made me pretty worry
I already ordered my diamond and I'm expecting it within 10 days ... I already ordered Overlay plus for the screen and front buttons and Invisible shield for the back and sides.. I was not planning to apply the invisible shield from day one but after what you guys wrote I think I will...

xda_fan said:
...does NOT sound good, I had this problem with my Trinity and it really looked a mess. I hope HTC read this post and maybe.... even say something about it? or would i be dreaming?
Click to expand...
Click to collapse
dream on
No paint rubbing off here after 6 weeks.

No paint rubbing off here either and it's thrown in a pocket with no case and has landed on the floor with no damage.

Zekee said:
some pictures maybe?
Click to expand...
Click to collapse
For your entertainment :-(

mbridges30 said:
For your entertainment :-(
Click to expand...
Click to collapse
I also see some pretty bad scratches on the display protection. Did you play ball with it?

tnyynt said:
I also see some pretty bad scratches on the display protection. Did you play ball with it?
Click to expand...
Click to collapse
My wife put it in her purse with a bunch of keys, but luckily it is only the screen protector. I can't blame her for the paint however, that was all me.
Playing ball with my Diamond wasn't one of the functions on the phone that I was aware of. Does the G sensor help you hit better?

we need a rubber case!!!
Oh no... this happend to me to my old wizard, but the paint lasted for at least 6 months before scratching. I hope my $700 phone has a good paint Job.

First hard drop...

So i just dropped my phone from head height onto a concrete floor
It slipped out of my hand while i was talking as i bumped into someone.
.
.
.
.
It survived! no marks, i'm not sure how it landed, but it was screen down on the floor when i found it.
Has anyone else dropped theirs and how has it managed? I'm sure we'd all like to know how much abuse it actually can handle.

same happens here...
and it dropped exactly the same way as yours did..haah
just like yours, no scratch and yet nth bad happened yet

Would have been even funnier if u were the one i bumped into lol
I think the cut off corners on the back really help. The back is heavier due to the battery and if it falls on a corner it seems to fall on the back cut off corner.

What a nightmare

i had 2 accidents. one of them "bent" the soft aluminum in the corner. still black and still working. the second one was so powerful that dissembled my diamond in 3 pieces: diamond (lol), cover and battery. i found the battery 2 meters from the disaster scene. this PDA seems to be a sturdy SOB..
any way, don't try this at home folks!!!1

Oh my preciousssss...

KukurikU said:
i had 2 accidents. one of them "bent" the soft aluminum in the corner. still black and still working. the second one was so powerful that dissembled my diamond in 3 pieces: diamond (lol), cover and battery. i found the battery 2 meters from the disaster scene. this PDA seems to be a sturdy SOB..
any way, don't try this at home folks!!!1
Click to expand...
Click to collapse
Sounds like it's dangerous there rehovot
Nadavi

pedmond said:
Oh my preciousssss...
Click to expand...
Click to collapse
hahaha ! smechere, vezi filme interzise....
Sounds like it's dangerous there rehovot
Click to expand...
Click to collapse
אולם מסוכן...

Nice to know it can survive a few knocks! It must have been one of those oh **** moments. Did the guy actually stop to apologise, I would have probably thumped him one, not that i advocate physically attacking someone LOL
So was it rough concrete, like paving stones, or something smooth like a tilled floor?

I sat in a recliner chair outside the other day and lay back. My diamond slipped out of my pocket onto a concrete floor from about a height of 30-40cm. There's now a small (very small) dent in the aluminium bit, bottom right, near the stylus slot.
It's hardly noticable, but I was gutted at the time!

imranbashir_uk said:
Nice to know it can survive a few knocks! It must have been one of those oh **** moments. Did the guy actually stop to apologise, I would have probably thumped him one, not that i advocate physically attacking someone LOL
So was it rough concrete, like paving stones, or something smooth like a tilled floor?
Click to expand...
Click to collapse
lol, it was my fault actually.. i was to busy talking on the phone and not paying atention. It was a smooth concrete floor thankfully!

not a diamond but...
Twice now I've had accidents with my Polaris on the running machine. The phone was resting in the slot on the machine while I was running. I must have knocked the headphone cable or something because the phone got yanked from the slot, dropped (about chest height) onto the treadmill and went flying back into the wall behind. Not even a scratch!

OUCH!!
<10 chars>

dropped mine from waist height....
my waist is probably higher than most of your ears lol JOKE lol again but anyways I got a little tiny scratch on the stylus....I guess thats why they give you 2 of those puppies....I love it. You know its a little heavier than most pdas from the metal frame but yes its a tough SOB and also I heard that the screen is made of some kind of really special plexiglass to prevent cracks. I heard you can drop it from a two story building and the glass will not crack!!! I would definately not try this at home but its what I heard....

I dropped it on the way back from the pub!!
The metal bezel now has three deep lines in it on the front side under the hardware buttons Fortunatly its still black
The top of the bezel on the front also has 3 scartches which have exposed the silver metal underneath.
what a disaster!

You remember that James Bond Movie with the evil guy having Diamonds in his face?
Well, my device slipped out of my hands , glided a meter or 2 on the parking ground and has now similar small dots (diamonds) on the lower part and casing.
But no worries, I gonna let "tune" paint & polish my Diamond.
They ask 150 NTD (5US) for refurbushing a PDA phone here

You guys gave me the creeeepssss.

Hmm i thought it was just me at first, but i've been checking all day, and my touch screen has become ALOT more sensative since the drop.
I actually had a phone call and while trying to fumble to pick up the call i dropped the phone. When i picked it up the touchscreen wouldnt work. After a reboot it was fine again. Now the lightest touch registers on the screen. Very wierd, but the scartches almost seem worth it to have it working so well.
I hope it doesnt die on my now :s

someone1234 said:
Hmm i thought it was just me at first, but i've been checking all day, and my touch screen has become ALOT more sensative since the drop.
I actually had a phone call and while trying to fumble to pick up the call i dropped the phone. When i picked it up the touchscreen wouldnt work. After a reboot it was fine again. Now the lightest touch registers on the screen. Very wierd, but the scartches almost seem worth it to have it working so well.
I hope it doesnt die on my now :s
Click to expand...
Click to collapse
Probably your fall activaded the Threshold tweak!

someone1234 said:
I actually had a phone call and while trying to fumble to pick up the call i dropped the phone. When i picked it up the touchscreen wouldnt work. After a reboot it was fine again. Now the lightest touch registers on the screen. Very wierd, but the scartches almost seem worth it to have it working so well.
Click to expand...
Click to collapse
LOL, thats another undocumented mod that can be added to the sticky!

oil stain under touch screen

heey fellow forum readers,
i hace got a oil stain under my screen
can somone tell me what it can be?
thnxs fore the info

Hello my friend.
Well actually that is very bad news. If you are inside the guarantee go to your dealer because this is a hardware and manufacture problem. Its a common problem on the latest hi res touch screens for htc.
I have the HTC touch diamond and i have the "Oily square of death" which is a like a rectangle just in the middle of the screen which looks like oil. My be your screen has become less responsive, some are reporting that with the time the screen goes completly useless and does not work at all.
There is no way you can fix it by yourself. I know its hard to know, still is a common problem So sad my friend.
Regards-

Bad situation. Sorry to hear that.
I dropped my TD2 to the ground today and i was very scared. I hope its okay.

this is caused by too much pressure on the screen by for example carrying the phone in your pocket and sitting down. i had the same problem and abviously the screen lowered itself into the phonecase. have a look on the phone sidewards and i think you will notice the same. i had luck and had an guarantee exchange. but normaly htc does not cover screen problems! take care with that phone.. even the manual says.. dont carry it in the pocket and sit down.. which is quite ridicolous for a mobile phone isnt it?

I had a dust particle under the touch screen (between the touch screen and display).
I've took the phone to my designated service (which was not an original HTC service) and they've cleaned it up. Now it's ok.
Maybe you should do the same.

thnxs
thnxs fore the reactions
i have contacted my phoneshop
the said it is a commen problem and it wil be cofferd
thnxs fore al the tips and help

Hmmm... I have the smae on my T-Mo Compact V.. wonder if they will cover it?

POSSIBLE SOLUTION!!!!
I fixed the very problem you guys are having with duct tape. Yes duct tape. The problem is not that the layers are separated, but that they are stuck together. So basically, your phone is acting as if it's continually being pressed, I put duct tape on the screen and gently removed it. I had to do this about twenty times, but eventually it separated the layers and the phone works like new. I know it sounds crazy, but it worked. I am aware of one other person who has had success with this method. I saw him post it on another forum. I believe this method will work for many of you so please try it and please be patient. As I said, it took several adhesions and removals before it worked.

momojopoe said:
POSSIBLE SOLUTION!!!!
I fixed the very problem you guys are having with duct tape. Yes duct tape. The problem is not that the layers are separated, but that they are stuck together. So basically, your phone is acting as if it's continually being pressed, I put duct tape on the screen and gently removed it. I had to do this about twenty times, but eventually it separated the layers and the phone works like new. I know it sounds crazy, but it worked. I am aware of one other person who has had success with this method. I saw him post it on another forum. I believe this method will work for many of you so please try it and please be patient. As I said, it took several adhesions and removals before it worked.
Click to expand...
Click to collapse
hehe nice...
if you cannot fix it with ducktape it is because You are not using much of it!

ducktape - a mans best friend!
reminds me of a time when we hooked up a projector with ductape during a conference
tape everywhere!

Tape works!!!
LOL
Last week I bought an Diamond 2 because the digitizer of my Cruise stoped responding. I tried the tape thing and... my cruise is working as a charme again.

Were there is duct tape there is hope

Wtf???Who came up with this????F***** awsome!!!The screen finally responded but seeing using a direct light there's still a square...Replacing a digitizer should sholve the problem,huh?

It hapend for me to this morning but the screen was still responsive.
Then I did the quick tape reperation and now whola rings are gone

hi
i think this tape sollution should be a sticky

had a go at the duct tape as a bit of a last ditch attempt.
still no luck, the oil stain disappeared however the screen remained mostly unresponsive.
a bit of screen mashing will press certain things in certain places, but not where the initial pressure was applied.
might keep trying it later.
word of warning though, careful if the sticky tape is strong, my digitiser started separating a little. i've resigned myself to a new one anyway so it wasnt much of a loss for me if ive made it worse.
just an fyi

Hi ,
anyone found a detailed guide on how to change the digitizer?

Tilt 2 Screen doing this.
OMG My Tilt 2 has the huge oil stain square thing now. Never had this before. First time I had it in my pants pocket ever without its case... 1 time. ATT says that I damaged the screen. By having it in my POCKET? WTF. This sucks. Ill try the Duct Tape thing. I hope that works.

IMO you can't expect a digitizer to withstand constant, direct pressure such as that inside of a tight jeans pocket. After all, it's just a few sheets of plastic with tiny gaps in between.
The digitizers employed on the TD2 and some other, newer models seem to be particularly sensitive, but nonetheless this is a common hazard with ANY resistive touchscreen. The plastic in a resistive touchscreen has to be soft and bendable, and because of that it is also susceptible to warping.
Capacitive touchscreens can be fitted with tough screen surfaces thanks to the relevant touchscreen components sitting behind the display panel and not in front of it.
I've used a hardcase with screen cover for the past six months since I bought my TD2. It makes the screen somewhat inaccessible on-the-go, so it's not the most practical solution. Still, it's the only way to truly protect the screen from pressure.
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000630&products_id=17582

sorry to dig out this post...
I have the same problem, I am planning to send it back to HTC. Do you think there is a risk they don't take it within the guarantee (sorry for my bad english) as I installed hard SPL and a cooked rom ? Maybe should I reinstall official HTC rom...
thank you for your advise

DIY GUIDE TO REPLACING THE 19$ BROKEN GLASS on the galaxy note

hi folks. i managed to replace my galaxy note front glass with a new one i got from ebay for 19$ and i want to make a step by step guide on how it can be done.
i did it using common tools and a s load of pacience and attention.
the tools i used are: heat gun with hi and low settings, exacto knife set,small phillips and flat screwdrivers, goo gone, and optional a screen protector.
first take the phone apart as it's describet in countless of threads and youtube videos. you should end up with the screen assembly shown in the first picture.
now we have to separate the glassscreen from the frame it sits on. for this we fire up the heat gun.
a few words about using the heat gun.
-my gun had 2 settings: low and high. during all this process i used it on low.
-don't put the gun directly and/or close to the thinn plastic wires that hold the two connectors.
- dont hold the gun in the same place more than 3 seconds, instead swipe the gun around the spot and the screen like u would do with a paint brush when painting.
- dont hold the gun too close, that is closer than 3 inch
-concentrate on the spot u working at but try to heat up the whole screen assembly, as it has to give away from all the points kind of at the same time, and not just the point u working at.
- dont overheat the screen as this will damage the amoled. thats how i got the two yellow spots on my screen. first one by accident and second one intentionaly to see if indeed the overheating is what caused it.
A very good rule for this is dont heat the phone more than you can bear to touch it cause afterall you have to hold the phone while working on it...
the way i did it is :
-i heated up the whole screen assembly, back and front, for a minute or two
- than i started to stick the tip of the exacto knife between the glass and the metal edge that sorrounds it. i started from the upper right corner, the side where the front camera is. see photo 2.
the goal is to unstick the glass from the frame. in photo 3 the frame and the screen is shown without the upper glass. this photo was taken after i finished everything, thats why the screen can be seen inside the frame. but i posted it to show the black sticky tape that its used to hold the glass to the frame. i think is the same kind of sticky tape thats used in all the touchphones including iphone to hold the front glass to the rest of the phone. in photo 4 i unsticked some of the tape to show it better. this tape is the main thing that holds the the glass to the frame. the other thing that hold the screen to the frame is some sticky glue on the back of the screen. but this is much softer and thiner glue. this is the reason why i say to heat up the whole screen assemby including the backside, to make it easyer to unstuck the glass and scren thats glued to it.
- once you get a bit of a foothold in the upper corner between and the glassand the frame you continue the folowing procedure again and again until the glass and screen detaches from the frame:
-every 2 minutes or so , when i feel the asemby cooled down, i'd heat up the whole assembly for 5 seconds or so, than concentrate on the spot i worked on for another 5 seconds, than move/push the exacto knife a bit. dont force it. after a while youl get a feel of it. if the exacto knife happend to be out, i would heat up the blade after heating up everything else, and than put the blade in.
prevent the freed parts from sticking back to the frame by using the rest of the exacto knife blades as shims.
once it detaches it should look like photo 5- the glass glued to the screen.
- now we have to detach or unglue the glass from the screen.
procedure is the same: start somewhere, heat, put knife in, etc... i used a second knife as shim folowing the first knife, and after avery couple moves i would get the knife out and wipe off the epoxy glue. heat the blade and put it back in.
when finished you should have something like photo 6 and 7: free screen covered in glue epoxy residue.
- now we have to get rid of the glue residue. i took the bulk of it usinga flat exacto knife blades like the one in photo 8 and 10. just warm the place a bit with the air gun and scrape it off with the blade. to clean what was left i used a bit of goo gone on a pice of cloth or napkin photo 9.
cleaned screen can be seen in photo 11 - sadly out of focus.
if u are like me and r impatient to test the screen you can just connect with just the side connector like in photo 12 and 13. the upper connector is for the s pen digitizer. side connector is for the screen and touch digitizer.
now all that's left is to put the phone back together except leave the new glass for last.
-first thing is to put the screen(without the glass) back on the frame. try to center it just right, so that ther's a little bit of space between the sides of the screen and the frame.
at this point all that will hold the screen to the frameis the thin layer of glue on the back of the screen. after centering and lowering the screen in the frame procede to put the phone back together folowing in reverse order the same steps used to disasambe it. when finished you should end up with the whole functioning phone except the front glass -as seen in photo 14.
now you can chose to trim and put a screen protector on the scree so as to fill the empty space between the screen and the glass - the space where the glue was, or you can just leave it empty. you can put a screen protector anytime after by removing the glass. which should be much easier to remove now that its held in place only by the blach sticky tape on the edges. just use some suction cap to remove it, starting at an age, and remove it like fliping a page. see photo 16. i used the note for 2 weeks without the screen protector in the empty space and it worked without a problem onlt thing was that when i pushed hard the glass would touch the screen and leave a bit of dirt in that place. thats why i decided to put the screen protector to fill the void. in photo 15 i raised the screen protector to make it visible in the photo.
if you are like me and worry that somehow the glass might fall off the phone you can always get a hard plastic case for the phone, like the one in the pics. it's made of 2 parts. one goes on the back one on the front and they snap togeter around the phone. this will hold the glass in place no matter what while it will also protect the phone.the case is in photos 17 and 18. i got this one of ebay for 8$ and free shipping.
the last thing to be done is:
for some reaseon the touch screen became much more sensitive after removing the glue so you need to lover the touch sensitivity. for this get the touchscreentune app from the market. it works with galaxy note and galaxy s2. put the sensitivity from the recomended 25 to 50.
the best thing about this procedure is that i dont have to worry about the f ing glass anymore. if it brakes again i'l just order another one and in under 2 minutes i can replace it. all i have to do is get the phone case off, put a suction cap on , , remove the old glass , and put the new glass. that's it.
because it takes 4 to 8 hours i would recommend the process to be done in 3-4 sessions as people would get tired after 2 hours of work and tend to lose focus, attention, patience and start to push to get it faster done, and that's when bad stuff happens like yellow spot burn on the screen or small scratches. another thing about scratches, even if u manage to scrach the screen dont worry to much as the scratches are almost invisible when the screen turns on. youl see what i mean ....
i do have one question: WHY DID SAMSUNG DECIDE TO GLUE THE SCREEN TO THE GLASS INSTEAD OF HAVING THEM SEPARATE LIKE ALL THE OTHER TOUCHPHONES?

I do the same for Galaxy S. I removed broken pieces of glass from device using guitar pick and carefully glued a new glass on each side. 9$ (free delivery) on ebay.

blank for future use
blank for future use

anonymous572 said:
I do the same for Galaxy S. I removed broken pieces of glass from device using guitar pick and carefully glued a new glass on each side. 9$ (free delivery) on ebay.
Click to expand...
Click to collapse
what kind of glue did you use? where did u get the glue from? how did u do it?
i didnt glue the glass back to the screen. i just put the glass on the frame. to fill the void where the glue was i trimed a regular screen protector and put it inbetween the glass and the screen. but it works same without it.

Very interesting, I didn't think it was possible because the glass is glued to the SAMOLED panel. I'm very glad that I am wrong.
As much as I hate to think about it, a guide like that would probably come in handy for many of us at some point.
*knocks on wood*

pboesboes said:
Very interesting, I didn't think it was possible because the glass is glued to the SAMOLED panel. I'm very glad that I am wrong.
As much as I hate to think about it, a guide like that would probably come in handy for many of us at some point.
*knocks on wood*
Click to expand...
Click to collapse
Nothing is impossible with the right tool and know-how . The glue could probably be uncured with a heat gun, just like ipad. The challenge is not damage the panel and make sure it is dust free after put back the replacement.
It is said impossible because of the difficulty involved. If you can't manage to install a screen protector with perfect alignment and zero dust spike, this task is not for you.
@drevilatwork Thank you for writing this step by step guide!

I dropped my phone last night and it landed face down, cracking the glass.
I'm so upset, but I don't think I have the skills or the tools to do this job myself. I am relieved to learn that the glass can be replaced, but do you know whether the Samsung agents are likely to be able to do this?

they probably wont do it. but you can try showing this thread to some technician or phone repair shop and they might do it for you. they also might charge you a lot to the point where it might be more convenient to just buy a new 260$ screen.

looks scary dude

all im going to say is good luck separating the 2 screens without breaking the lcd or scratching the crap out of it ... this is a 90% epic fail method but thumbs up to the few that may succeed or dont mind their screen looking like its been belt sanded...

Its worth a try, since screen replacement costs 230 euros.

kawgirlval69 said:
all im going to say is good luck separating the 2 screens without breaking the lcd or scratching the crap out of it ... this is a 90% epic fail method but thumbs up to the few that may succeed or dont mind their screen looking like its been belt sanded...
Click to expand...
Click to collapse
actually .. the funny thing is that even if u manage to screch the screen and / or leave dirt behind it doesn't show while the phone is on. it might show when is off but not when is on. i was suprised about that too. and secondly, having to do it again knowing what i know now i would do it without leaving a mark. and in the end is certenly worth a shot before ordering the 260$ screen assembly. the special thing that it requires is pacience and attention.

Why different prices for all the same lenses in this shop ?

drevilatwork said:
actually .. the funny thing is that even if u manage to screch the screen and / or leave dirt behind it doesn't show while the phone is on. it might show when is off but not when is on. i was suprised about that too. and secondly, having to do it again knowing what i know now i would do it without leaving a mark. and in the end is certenly worth a shot before ordering the 260$ screen assembly. the special thing that it requires is pacience and attention.
Click to expand...
Click to collapse
as i said good luck with it and hope you make some money doing it..... ive successfully done the same thing myself but other than it will never look good like a factory screen (not even close), the amount of time it takes to make it look anywhere near acceptable (not like a 10 dollar repair) is big and that makes the repair not really worthwhile doing it for anyone but yourself and even then who spends 700-800 dollars on something and does a repair that makes it look cheap... then theres the whole ordeal of the membrane youre taking the adhesive off of along with the HUGE chance of damaging it.. it is placed with precision and adhered for a reason along with being dust and scratch free... this is a repair that just wont last because things will start functioning improperly for multiple reasons...
im not knocking you or anyone who tries this..im just trying to emphasize the dangers, downfalls and the probability of it being a legit solid repair. also the resale value when the next greatest thing comes along... just beware....

Hmmmm
Well chaps I hate to disagree here, but after speaking to the technical bods at Samsung it appears that the OLED is NOT glued to the glass, but the glass is laminated and bonded in, much like a car windscreen. My screen got broken the other day and I have read the 2 posts on XDA regarding this. Now if you go and have a look at the pics of the other post
http://forum.xda-developers.com/showthread.php?t=1487716
you can clearly see the OLED, although broken, seperated from the glass with no sign of any glue. The reason it broke is that upon heating the glass you will melt the glue, which will then stick to the edges of the OLED and if you pry it at the wrong place/time/too hard/whatever you will break the OLED as it is glued to the bezel itself. So when my glass arrives I am going to attempt to remove the glass using fishing line and pulling it between the glass and the bezel and OLED to release it, the same way as I used to remove car windscreens, and post the results here. I have also been told that the reason for the sticky "epoxy" mess that you encountered in this postis from melting the plastic on the back of the glass (which is the lamination!) by using too much heat.....I mean come on, a heat gun is a bit excessive!! Prying the screen out a bit at a time might work, but will surely end in tears, where as cutting the cold adhesive with a fine nylon cable, which wont scratch the OLED, might just work. I'll keep you posted on my results.

Just throwing an idea out there: maybe the adhesive would be easier to defeat when it's really cold, rather than really hot. I know a lot of adhesives become quite brittle when you put them in the freezer, superglue and epoxy for example. And the electronics/plastics of the display could be relatively fine with the low temps.

pboesboes said:
Just throwing an idea out there: maybe the adhesive would be easier to defeat when it's really cold, rather than really hot. I know a lot of adhesives become quite brittle when you put them in the freezer, superglue and epoxy for example. And the electronics/plastics of the display could be relatively fine with the low temps.
Click to expand...
Click to collapse
this is not one of them...i can guarantee this 100%
learn how a digitizer is made then you might see the light, and not just the light of white trash repair and failure...
ive explained it in great detail many times... and btw just because im a girl doesnt mean what im saying is wrong... 20+ years in the industry gives me sort of a clue as to what im saying..
im trying to help people avoid a long drawn out disaster and to waste $20(which is NOT gorilla glass) plus all of the other things they buy to try to make this a success which will never happen...
and fyi freezers, superglue and epoxys are big no no's...they are not used by any factory so there is another myth busted... they will just add to the destruction... 100% guarantee

kawgirlval69 said:
this is not one of them...i can guarantee this 100%
Click to expand...
Click to collapse
What do you mean? One of what?
learn how a digitizer is made then you might see the light, and not just the light of white trash repair and failure...
Click to expand...
Click to collapse
I know how a digitizer is made.
ive explained it in great detail many times... and btw just because im a girl doesnt mean what im saying is wrong... 20+ years in the industry gives me sort of a clue as to what im saying..
Click to expand...
Click to collapse
I had no idea you were a girl and I don't see why that matters. Experience is the industry is of course relevant, if your particular field in the industry was related to repairs. But I don't know if it is?
im trying to help people avoid a long drawn out disaster and to waste $20(which is NOT gorilla glass) plus all of the other things they buy to try to make this a success which will never happen...
Click to expand...
Click to collapse
The glass on the Note is Gorilla glass: http://www.corninggorillaglass.com/products-with-gorilla/full-products-list
and fyi freezers, superglue and epoxys are big no no's...they are not used by any factory so there is another myth busted... they will just add to the destruction... 100% guarantee
Click to expand...
Click to collapse
I didn't say factories use superglue or epoxy, or freezers for that matter. But the fact that factories don't use them doesn't mean it can't work for DIY repairs. Low temperature brittleness isn't exclusive to epoxy or superglue. Many, many glues (and other materials) have that property.

pboesboes said:
What do you mean? One of what?
I know how a digitizer is made.
I had no idea you were a girl and I don't see why that matters. Experience is the industry is of course relevant, if your particular field in the industry was related to repairs. But I don't know if it is?
The glass on the Note is Gorilla glass: http://www.corninggorillaglass.com/products-with-gorilla/full-products-list
I didn't say factories use superglue or epoxy, or freezers for that matter. But the fact that factories don't use them doesn't mean it can't work for DIY repairs. Low temperature brittleness isn't exclusive to epoxy or superglue. Many, many glues (and other materials) have that property.
Click to expand...
Click to collapse
i mean exactly what i wrote... as per your idea... this wasnt one that would work... my god man do i have to spell everything out for you???
obviously you dont know how a digitizer is made or you wouldnt have spouted the crap you have... bottom line
the girl part..well some dont think women know anything..its a culture thing.. but as for you not knowing if my particular field in the industry was related to repairs my god ive only said it multiple times in multiple posts... but since you dont like to read i'll say it again..20+ years board level factory trained.. motorola, audiovox, nokia, samsung... and this is a samsung forum so i think i have my tech qualifications covered here... again READING IS GOOD... work on that...
again you just dont read or have horrible comprehension because i never said the notes screen wasnt gorilla glass i said the $19 one wasnt... seriously every time you type something you dig yourself a deeper hole...
your superglue and epoxy blather just shows you dont have a clue and dont read... really they dont have any place in the screen/lcd part of diy.. its just trouble looking for a place to happen... now if the plastic housing needs repaired maybe but still not a top ten choice... if you had a clue you would know the proper adhesive to use... and its easily found... you are just too much...
seriously...just give it a rest... i wasnt bashing on you and have said it ive also said all im trying to do is help people not make a bad decision... and THIS IS A BAD DECISION...
you want me to play nice (which i really am..most other forums here would have totally lowered the boom on you for spouting crap... ive been really nice.. to keep it that way just go post somewhere where you can be productive... here youre not... im sure you have some great ideas but nothing you have said in this thread is remotely good.. sorry but it is what it is...
beep beep

kawgirlval69 said:
i mean exactly what i wrote... as per your idea... this wasnt one that would work... my god man do i have to spell everything out for you???
Click to expand...
Click to collapse
The sentence made no sense considering what it was replying to. Not my fault you were unclear/ambiguous.
obviously you dont know how a digitizer is made or you wouldnt have spouted the crap you have... bottom line
Click to expand...
Click to collapse
Ok?
the girl part..well some dont think women know anything..its a culture thing.. but as for you not knowing if my particular field in the industry was related to repairs my god ive only said it multiple times in multiple posts... but since you dont like to read i'll say it again..20+ years board level factory trained.. motorola, audiovox, nokia, samsung... and this is a samsung forum so i think i have my tech qualifications covered here... again READING IS GOOD... work on that...
Click to expand...
Click to collapse
Reading is very good, but you can't assume everyone in a public forum has read every single post of yours and remembers every detail. What isn't helping is the lack of proper punctuation and formatting which make your posts unpleasant to read.
again you just dont read or have horrible comprehension because i never said the notes screen wasnt gorilla glass i said the $19 one wasnt... seriously every time you type something you dig yourself a deeper hole...
Click to expand...
Click to collapse
Replacement screens are generally OEM parts.
It might appear I'm in a hole, but that's only because I live in Holland and am below sea level. I assure you I haven't done any digging.
your superglue and epoxy blather just shows you dont have a clue and dont read... really they dont have any place in the screen/lcd part of diy.. its just trouble looking for a place to happen... now if the plastic housing needs repaired maybe but still not a top ten choice... if you had a clue you would know the proper adhesive to use... and its easily found... you are just too much...
Click to expand...
Click to collapse
I wasn't suggesting to use superglue or epoxy, read it again.
seriously...just give it a rest... i wasnt bashing on you and have said it ive also said all im trying to do is help people not make a bad decision... and THIS IS A BAD DECISION
Click to expand...
Click to collapse
I get that, and appreciate your concern. However, you should understand that some people like to try things even when the chance of success is not very high. You seem to be one of us in that regard (you attempted repairs yourself too, right?), so I don't see why it upsets you so much.
you want me to play nice (which i really am..most other forums here would have totally lowered the boom on you for spouting crap... ive been really nice.. to keep it that way just go post somewhere where you can be productive... here youre not... im sure you have some great ideas but nothing you have said in this thread is remotely good.. sorry but it is what it is...
beep beep
Click to expand...
Click to collapse
I don't care if you play nice or not. I appreciate honesty. Now for some honesty in return: you're not helping in this thread.
All you do is say people's ideas are stupid without giving arguments that aren't arguments from authority. And I would very much appreciate it if you would stop misrepresenting my posts (intentional or not).

[Q] Xperia Z plastic scratched/dented help needed.

Hello guys
to sum it up i have the Xperia Z in black. I have a sticker on it covering everything except the black lines on the sides of the phone on each side of the flaps. So the bits where it is black rubbery plastic. So i had the phone in my jacket like an idiot and normally i have a pocket i keep the phone in ususally. However yestarday i had forgotten the pocket and was carrying the phone in my jacket when i decided to take off my headset and by doing that forgot to zip up the jacket and the phone fell off top first onto concrete.
Phone works perfectly screen or any glass is not damaged at all the only damage were 2 small dents on both sides of the top of the phone. So the rubbery plastic top righ. One is near the music jack and the other one above the USB port.
So my question is since i screwed it up warranty is obviously bull****. My q is would there be any way to repair this. As in paint marker or anything that might cover it up? (except for a backplate protector or snap in ) hate all of those.
Obviously goes without saying all help would greaty be appreciated and used to reinstate my inner tranquility.
Best Regards
Shallowmist

Shallowmist said:
Hello guys
to sum it up i have the Xperia Z in black. I have a sticker on it covering everything except the black lines on the sides of the phone on each side of the flaps. So the bits where it is black rubbery plastic. So i had the phone in my jacket like an idiot and normally i have a pocket i keep the phone in ususally. However yestarday i had forgotten the pocket and was carrying the phone in my jacket when i decided to take off my headset and by doing that forgot to zip up the jacket and the phone fell off top first onto concrete.
Phone works perfectly screen or any glass is not damaged at all the only damage were 2 small dents on both sides of the top of the phone. So the rubbery plastic top righ. One is near the music jack and the other one above the USB port.
So my question is since i screwed it up warranty is obviously bull****. My q is would there be any way to repair this. As in paint marker or anything that might cover it up? (except for a backplate protector or snap in ) hate all of those.
Obviously goes without saying all help would greaty be appreciated and used to reinstate my inner tranquility.
Best Regards
Shallowmist
Click to expand...
Click to collapse
It's good and all, but pictures would help us A LOT! Based on your picture we can't really give you any advice.

Good point
Dsteppa said:
It's good and all, but pictures would help us A LOT! Based on your picture we can't really give you any advice.
Click to expand...
Click to collapse
Excellent point my friend, i shall aquire the afore mentioned pictures later today with my trusty Xperia Play. At any rate i tried to explain it as best as possible but like you said without pictures it's just horrible....

Pictures Update!
Dsteppa said:
It's good and all, but pictures would help us A LOT! Based on your picture we can't really give you any advice.
Click to expand...
Click to collapse
Here are the PIC updates.

Shallowmist said:
Here are the PIC updates.
Click to expand...
Click to collapse
I have a ding jus like that on my phone next to the microphone port...I dont even know where it came from!! I havent dropped it...I even rest it on a napkin on my desk and its always in my left pocket which is solely dedicated to my XZ ...lolz...nooo idea....

I feel your pain bro i too have a couple of nicks on the phone and it's bugging me lol

Is there any feasible action to undertake here.
Teknohtc said:
I feel your pain bro i too have a couple of nicks on the phone and it's bugging me lol
Click to expand...
Click to collapse
It is incredibly annoying to have these nicks and scrapes on it. Obviously it beats not having the phone or having broken glass, but everyone has their own problems i guess. Is there seriously nothing that can be done about this?.

Shallowmist said:
It is incredibly annoying to have these nicks and scrapes on it. Obviously it beats not having the phone or having broken glass, but everyone has their own problems i guess. Is there seriously nothing that can be done about this?.
Click to expand...
Click to collapse
I think the only thing you can do is replace the whole skeleton :crying:

Shallowmist said:
Here are the PIC updates.
Click to expand...
Click to collapse
May i know where you get your back screen protector/picture ?

I was afraid fo the skeleton thing and skin is from!!!!
joejoe23 said:
May i know where you get your back screen protector/picture ?
Click to expand...
Click to collapse
I was afraid that the skeleton might have to be changed, but the skin is front and back the only visible parts left on the phone are the little black sides i got my bumps on and the front glass. I purchased mine from http://www.ebay.co.uk/itm/ws/eBayIS...9&ssPageName=ADME:L:PMR:NL:1123#ht_6096wt_907
They have many different models i just got this one. These guys are amazing in bringing out good things i had one of those on ipod 4 used it 8 months than sold the ipod never had problems with the skin.

xperia z
is there a factory screen protector on the back of xperia z, as there is on the front. I scratched the back of the Xperia z. And if there is no screen protector back, is there a possibility of polishing

I did the same thing. I was so in love with the screen I didn't think to check out how scratch resistive the rear panel was until I had let it get sl gouged to all hell

Mines missing both the USB and heaphone flaps, front and back are cracked, there is virtually nothing left of the plastic around the outside and the bottom face is missing the sticker that has the barcode and such on...
Makes me laugh when people worry about little marks