Database Develop

Broken Diamond display, or what?

Hello there, XDA.
This thread is more for an ensurance for me that I've done nothing wrong when using my phone - and it might show up that some other people have the same problem as I do.
Now, to the thingie. Bought a HTC Diamond about 3 months ago - working just fine. Although about 3-4 weeks ago I realized that when I tilt my screen, I can see some crazy stuff going on... There is two pictures attached and linked to further down.
Anyone else has this problem? Would be lovely to hear what you've done. I sent an e-mail to HTC and the manu... manufactourer-/or~ (spelling :b).
http://img403.imageshack.us/img403/6462/htcbrokenkx4.jpg
http://img393.imageshack.us/img393/2473/htcbroken2wl7.jpg

i haven't got that problem, and that doesn't look good at all for you

jewhaen said:
Hello there, XDA.
This thread is more for an ensurance for me that I've done nothing wrong when using my phone - and it might show up that some other people have the same problem as I do.
Now, to the thingie. Bought a HTC Diamond about 3 months ago - working just fine. Although about 3-4 weeks ago I realized that when I tilt my screen, I can see some crazy stuff going on... There is two pictures attached and linked to further down.
Anyone else has this problem? Would be lovely to hear what you've done. I sent an e-mail to HTC and the manu... manufactourer-/or~ (spelling :b).
http://img403.imageshack.us/img403/6462/htcbrokenkx4.jpg
http://img393.imageshack.us/img393/2473/htcbroken2wl7.jpg
Click to expand...
Click to collapse
That just looks like moisture between the screen protector and the screen itself.

Odd that it's in a perfect rectangle. I've seen this before on a mates LG Viewty (Horrible phone!), but he never followed it up so I don't know what the cause was. It did have a touch screen, but no protector. Perhaps its moisture actually in the screen or a manufacturing fault?
Good luck.

Oh my - I had rectangle on the screen today when I removed the protective front later (brand new phone).
Though It's no longer showing I'm scared its going to become more apparent and eventually become like this.
What is going on with QA and HTC?
There was another exact case like this that I saw this week. Can't really remmeber but do a search and you will find it.

I have the same thing on my Touch Pro, and another user has had the same problem on his (her?) Diamond:
http://forum.xda-developers.com/showthread.php?t=428262
Unfortunately it isn't moisture below the screen protector, but that the touch resistive layer was subject to heavy pressure (eg: being squeezed in the pocket). It shouldn't affect anything in the short term, but in the long run the touch screen might become erratic or imprecise, so you should keep an eye on it.
The store I bought my TPro from doesn't accept returns/exchanges, and so far HTC hasn't replied to my support ticket. Unfortunately I think some of us are going to be left out in the cold. Personally I'm tempted to buy a replacement touch layer and replace it myself, but of course that would void the warranty (even though it doesn't seem to be doing me any good).
If this becomes widespread, there could be a chance for a class action lawsuit (hopefully HTC will wise up and help us out before it comes to that).

Ouch >.<, feeling sad (but somewhat a bit of relief) that some others has the same problem.
Yes, the rectangular shape is very, very odd - since that makes me think that just pressure can create this mess. It feels more like a manufacturing fault.. But, as for fhsieh, HTC hasn't respond to my support ticket.
Wondering if I should call them to get a direct answer.. Hm.

I've suffered this
But in a Touch Cruise I own before. I thought, as said, that this regular shape can only came from a pressure problem.
Loosing my warranty (due to the long time to be repaired here in Spain), I opened it, confirming that was not a problem with moisture (at least in my case). Also I saw the resistive layer poorly sticked to the body, with zones unglued, causing the layer to raise, specially in the bottom edges. This bothered me a lot, because I ended with lot of dirt between the layer and the screen itself, unable to clean.
Maybe that was the problem. If the layer is not correctly assembled it gets an irregular surface (as lightly squeeshed) , yielding this. But, functionally speaking, the screen was performing well, as it should be.
Hope this helps.

It's only humidity... it happens also in my diamond... try to dry it under the sun..(not so good for lcd but it works for me)..

Immanuel01 said:
It's only humidity... it happens also in my diamond... try to dry it under the sun..(not so good for lcd but it works for me)..
Click to expand...
Click to collapse
in a perfect rectangular? that doesn't seems right. although I could try it i guess.. still no answer from HTC Support -.-

jewhaen said:
in a perfect rectangular? that doesn't seems right. although I could try it i guess.. still no answer from HTC Support -.-
Click to expand...
Click to collapse
Yes, it's due to the prefect pressure of the screen, exactly in the center..if you try to press a corner for example near to Start button (with screen off) you should see the spot follow your finger's pressure. So there is a small drop between LCD and screen..(for me)

I had same problem in polaris. Send it for warranty as this is manufacturing fault. Why keep ****??? its htc s fault!?!

Well I thought i was the only one who had this problem till I came across this thread.... it's quite weird it's in a perfect rectangular shape anyone tried removing the protective screen and checkin whether it is the display... but one thing you hve to notice once the display is on we can't see tht on the screen only against a black background can you notice it....

It is the problem of screen protector. You may not see this watermark after you take off the screen protector. Try other good screen protector like Brando, Martin Fields ....

angler said:
It is the problem of screen protector. You may not see this watermark after you take off the screen protector. Try other good screen protector like Brando, Martin Fields ....
Click to expand...
Click to collapse
I tried removing the screen protector and the rectangular shape is still there then I put it in front of an A/C cooler unit and it went away!!!! then after awhile it returned back and the place I live is very hot and humid so I guess it's weather which plays a role....

Scratches! How can I remove them?

So some inconsiderate person at work just picks up my phone without asking, and runs her broke-ass fingernails across the screen, BAM! instantly two fine hairline scratches right through the middle, all the way across. ARGG! Is there anyway I can buff these out, or get a new plastic screen?

Scratches...
Always use a screen protector... and don't let women touch your device - women and technology don't mix! (Only joking ladies ).
I found this on eBay - it's really good stuff.
Displex
Hope this helps.

It's probably a little too late, but a screen protector is always a good idea! Once you find out how to get it fixed, I highly recommend using one.

Well, it worked for mine but i still say test, do this:
- Toothpaste, it can be used to sand things with, like shiny plastics
- now, before you put half a tube on it, it would be safer to test first, take a little bit of toothpaste on your finger, little bit of water, mix between 2 fingers, then in circles rub a small corner of your screen, for a few minutes
- if it doesnt get less shiny, you can go rub circles over the scratch, once again a little toothpaste and a little drop of water to mix toothpaste with (makes it easyer to rub bscly)
The above got a nasty (unfortunatlly deep) scratch to be almost invisible when using device (cuz its deep u can still see it when the device is off) on my htc touch diamond, wich i caused the second day i got the device, by having the diamond and its headphones in the same pocket
The mentioned displex is a paste somewhere in between toothpaste and silver-cleaner-stuff, it would most likelly work better then my trick, but hey, maybe you can save yourself a few quids by getting the scratches off for 'free' (assuming you have toothpaste already) i do still advice you to even when you get displex test on a tiny part of a corner first, theres a whole lot of different plastics on phones. you can pick displex up at those phone stores that work with several contracters (orange tmobile etc)
This topic reminded me i didnt try with displex yet btw
Edit:
Another thing, screen protectors kinda suck on touch devices, since it reduces the capability to detect touch, always.
Didn't HTC state somewhere that it was amazing scratch proof glass and screen protector was only included out of habit?

suicidal.banana said:
.......
The mentioned displex is a paste somewhere in between toothpaste and silver-cleaner-stuff, it would most likelly work better then my trick, but hey, maybe you can save yourself a few quids by getting the scratches off for 'free' (assuming you have toothpaste already) i do still advice you to even when you get displex test on a tiny part of a corner first, theres a whole lot of different plastics on phones. you can pick displex up at those phone stores that work with several contracters (orange tmobile etc)
This topic reminded me i didnt try with displex yet btw
Edit:
Another thing, screen protectors kinda suck on touch devices, since it reduces the capability to detect touch, always.
Didn't HTC state somewhere that it was amazing scratch proof glass and screen protector was only included out of habit?
Click to expand...
Click to collapse
Displex is really awesome! Some ime ago i bought it for fixing my Laptop-Screen and even there (on an ASUS Crystal Display) it worked perfectly!
The only negative thing about Displex in my opinion is, that if you are using it too often, the screen will become kinda "unshiny" just like after polishing a car too much.... i noticed that after i used it several times to fix my Samsung D900 Screen
And regarding the screen protector delivered with the devide... I think it is a really good thing! I attached it to my Diamond after one week and didn't notice any differences... it even worked better when using the fingers to tap the screen.

Good advice here....tooth paste is good for removing most of a deep scratch BUT test first....
Displex to get the fine stuff....I would still test this as well, VERY CAREFULLY of course!!

Try this..
http://forum.xda-developers.com/showthread.php?t=415933
please search before you post...

Do not use toothpaste unless you test it first. Different toothpastes use different size grit. You may end up causing more problems.
To polish plastics, I use jeweller's rouge. Just rub some on a clean cloth and work away. It's slow but there's les chance of screwing things up.
If it's only a couple of fine scratches that are difficult to see, then leave it. Polishing will change the surface texture so you will need to polish the entire surface, not only the area of the scratches. It's doubtful that you'll find anything to match the original surface.

Are dust under your screen?

Just to know if this issue is common over the TD2 comunity!!!

I voted and I do. It is not just by the volume bar but all over the screen. It moves to different places during the day. Indoors and at night it is not noticable when the screen is on but during the day and when the screen is off I can see it. Hopefully it is an issue that is fixed and HTC will replace our units mebe.

I had a TD2 for about 2 weeks when I noticed dust entering beneath the screen near the volume keys. I returned it for an exchange and have had a second TD2 for a week and this one is doing exactly the same....seems to much of a coincidence to be an isolated case....I suspect there is a design flaw.
Im now arranging to return this device, going to choose something different....shame though cos I thought the TD2 was such an improvement over the original TD!

Looks like is better to wait for TP2, ha?
What about blowing off the dust with compressed air can? Did anybody try it?
later

To blow it off you have to dismantle your TD2 from backside. There is no service manual (dismantling guide) yet. I sent my TD2 to the service, they blowed the dust off, but the dust is coming in again. I think there is a sealing problem...
So, lets get antistatic gloves, screw driver, plastic crowbar and...

It may be interesting to see if there's a correlation with where the device is constructed. Mine is made in taiwan and has no dust.

deechte said:
It may be interesting to see if there's a correlation with where the device is constructed. Mine is made in taiwan and has no dust.
Click to expand...
Click to collapse
Mine is also taiwan. But WITH dust..

I also encountered this problem.. i just got this phone 2 days ago.. Though not really a lot of dust.. but it is still visible beneath the screen, near volume keys.. ARGH!! Mine is also from taiwan..

ME TOO
I have my second unit now and both has the dust problem!
this is sooo sad,
I already called htc support center and I am waiting on an answer.

No dust here.

no dust after month!

no dust here either. Any idea from which side it should get under ur screen? and might It have anything to do with the way ur handling ur phones? (not pointing fingers here, just curious)

Dust here after four weeks.
It wont let me vote for some reason either in the poll. Mine is not in a dusty environment and lives in a canvas cover so no idea how its got in!

Yes Dust after one week of use...
R.

Also dust after 1 week already, have it now almost a month.

No dust anywhere maybe, because I'm using a pouch bag

dust free after 1 week. i always put in my leather case.

Keyboard scratches!

Hello everyone.
I noticed my keyboard gets scratched, more on the right side, keys "del", "enter" and "ok".
Does anybody else have the same problem? I'm not using that keyboard a lot, so probably those who use it every day should get even worse results...
A friend of mine doesnt use it much too but got these scratches also...

i got one on the enter key. dont know where i got that one. maybe i got some little dirt whatever stuff in my pocket and it went into the x1 and when you slide it up it does that scratches :/

Holy crap what the heck do you do to your Xperia!!!!?

lol i use mine 24/7 and mine is like brand new except for the battery cover, had mine for a few months too

alex_mib said:
Hello everyone.
I noticed my keyboard gets scratched, more on the right side, keys "del", "enter" and "ok".
Does anybody else have the same problem? I'm not using that keyboard a lot, so probably those who use it every day should get even worse results...
A friend of mine doesnt use it much too but got these scratches also...
Click to expand...
Click to collapse
The most likely reason for this damage to the keyboard is using acetone or maybe even alcohol to clean the keyboard....

poetryrocksalot said:
The most likely reason for this damage to the keyboard is using acetone or maybe even alcohol to clean the keyboard....
Click to expand...
Click to collapse
Again, I'm almost not using hard keyboard.
I usually keep the phone in front jeans pocket, looks like smth inside scratches it, but i dont wanna disassemble it to find out =)

not only is your x1 scratched but its dirty.

My one is worse!
I will upload some pictures later as I am off out today
What causes this
I use my phone alot but surely it shouldn't happen?

poetryrocksalot said:
not only is your x1 scratched but its dirty.
Click to expand...
Click to collapse
it is not dirty, i tried to remove that, but no luck - those are scratches!

I've got scratches on the windows key and the enter key

Never heard of or saw these types of scratches on the keyboard. Wow.

wash ur fingers before u use it
if u have dust or sand-like stuff on ur hand it will act as a sand paper
and apply less force when sliding ur phone apart
take care

Lol I would never touch your Xperia, it looks ****ing dirty Man, what are you doing with this phone?!? Gardening?

Obviously people don't know how to take care of their stuff. Word of advice, don't have kids.

hey, it looks like a "cracks in the case" case
Manufacturing defect

I don't know what you put in your pockets, but your X1 keyboard looks really dirty (especially with the wood piece under the blue key). I have some dust on my keyboard because it's in my left front jeans pocket the whole day, but this dust just goes away if I blow on the X1. If something don't goes away, use a dry soft tissue, or the humid tissues used to clean camera lenses.

the second pic clearly shows marks that clearly states that your x1 received torture dude, whether it be dropping or rubbing against something rough, it also shows something looking like dirt(mud) including dust on the board surface.
it looks as tho the phone fell many many times whilst the slide was out and possibly dragged on that surface on some kinda object
poetryrocksalot, i have 3 kids ages 6,5,3 lol, and my stuff are in tip top shape
scratches do not appear just like that, its impossible for scratches to appear out of the blue...in other words, your x1 clearly shows bad handling and money wasted on a device that deserves an owner who knows how to care their devices.

the only scratches im gettin is on the battery cover

my x1 got it too but just on the enter button... not as bad as yours but anyway... had mine for 6 or 7 months now... i think i know how the scratches get there and sorry for my swenglish... when i push the i dont know what to call it.. .lets call it the display to reveal the keyboard i put my thumbs on the bottom of the screen and push upwards but at the same time i push it slighty down and therefore i get the scratches try it and you will see how it touches the enter button...

I won't be able to sleep....... ever.......

DIY GUIDE TO REPLACING THE 19$ BROKEN GLASS on the galaxy note

hi folks. i managed to replace my galaxy note front glass with a new one i got from ebay for 19$ and i want to make a step by step guide on how it can be done.
i did it using common tools and a s load of pacience and attention.
the tools i used are: heat gun with hi and low settings, exacto knife set,small phillips and flat screwdrivers, goo gone, and optional a screen protector.
first take the phone apart as it's describet in countless of threads and youtube videos. you should end up with the screen assembly shown in the first picture.
now we have to separate the glassscreen from the frame it sits on. for this we fire up the heat gun.
a few words about using the heat gun.
-my gun had 2 settings: low and high. during all this process i used it on low.
-don't put the gun directly and/or close to the thinn plastic wires that hold the two connectors.
- dont hold the gun in the same place more than 3 seconds, instead swipe the gun around the spot and the screen like u would do with a paint brush when painting.
- dont hold the gun too close, that is closer than 3 inch
-concentrate on the spot u working at but try to heat up the whole screen assembly, as it has to give away from all the points kind of at the same time, and not just the point u working at.
- dont overheat the screen as this will damage the amoled. thats how i got the two yellow spots on my screen. first one by accident and second one intentionaly to see if indeed the overheating is what caused it.
A very good rule for this is dont heat the phone more than you can bear to touch it cause afterall you have to hold the phone while working on it...
the way i did it is :
-i heated up the whole screen assembly, back and front, for a minute or two
- than i started to stick the tip of the exacto knife between the glass and the metal edge that sorrounds it. i started from the upper right corner, the side where the front camera is. see photo 2.
the goal is to unstick the glass from the frame. in photo 3 the frame and the screen is shown without the upper glass. this photo was taken after i finished everything, thats why the screen can be seen inside the frame. but i posted it to show the black sticky tape that its used to hold the glass to the frame. i think is the same kind of sticky tape thats used in all the touchphones including iphone to hold the front glass to the rest of the phone. in photo 4 i unsticked some of the tape to show it better. this tape is the main thing that holds the the glass to the frame. the other thing that hold the screen to the frame is some sticky glue on the back of the screen. but this is much softer and thiner glue. this is the reason why i say to heat up the whole screen assemby including the backside, to make it easyer to unstuck the glass and scren thats glued to it.
- once you get a bit of a foothold in the upper corner between and the glassand the frame you continue the folowing procedure again and again until the glass and screen detaches from the frame:
-every 2 minutes or so , when i feel the asemby cooled down, i'd heat up the whole assembly for 5 seconds or so, than concentrate on the spot i worked on for another 5 seconds, than move/push the exacto knife a bit. dont force it. after a while youl get a feel of it. if the exacto knife happend to be out, i would heat up the blade after heating up everything else, and than put the blade in.
prevent the freed parts from sticking back to the frame by using the rest of the exacto knife blades as shims.
once it detaches it should look like photo 5- the glass glued to the screen.
- now we have to detach or unglue the glass from the screen.
procedure is the same: start somewhere, heat, put knife in, etc... i used a second knife as shim folowing the first knife, and after avery couple moves i would get the knife out and wipe off the epoxy glue. heat the blade and put it back in.
when finished you should have something like photo 6 and 7: free screen covered in glue epoxy residue.
- now we have to get rid of the glue residue. i took the bulk of it usinga flat exacto knife blades like the one in photo 8 and 10. just warm the place a bit with the air gun and scrape it off with the blade. to clean what was left i used a bit of goo gone on a pice of cloth or napkin photo 9.
cleaned screen can be seen in photo 11 - sadly out of focus.
if u are like me and r impatient to test the screen you can just connect with just the side connector like in photo 12 and 13. the upper connector is for the s pen digitizer. side connector is for the screen and touch digitizer.
now all that's left is to put the phone back together except leave the new glass for last.
-first thing is to put the screen(without the glass) back on the frame. try to center it just right, so that ther's a little bit of space between the sides of the screen and the frame.
at this point all that will hold the screen to the frameis the thin layer of glue on the back of the screen. after centering and lowering the screen in the frame procede to put the phone back together folowing in reverse order the same steps used to disasambe it. when finished you should end up with the whole functioning phone except the front glass -as seen in photo 14.
now you can chose to trim and put a screen protector on the scree so as to fill the empty space between the screen and the glass - the space where the glue was, or you can just leave it empty. you can put a screen protector anytime after by removing the glass. which should be much easier to remove now that its held in place only by the blach sticky tape on the edges. just use some suction cap to remove it, starting at an age, and remove it like fliping a page. see photo 16. i used the note for 2 weeks without the screen protector in the empty space and it worked without a problem onlt thing was that when i pushed hard the glass would touch the screen and leave a bit of dirt in that place. thats why i decided to put the screen protector to fill the void. in photo 15 i raised the screen protector to make it visible in the photo.
if you are like me and worry that somehow the glass might fall off the phone you can always get a hard plastic case for the phone, like the one in the pics. it's made of 2 parts. one goes on the back one on the front and they snap togeter around the phone. this will hold the glass in place no matter what while it will also protect the phone.the case is in photos 17 and 18. i got this one of ebay for 8$ and free shipping.
the last thing to be done is:
for some reaseon the touch screen became much more sensitive after removing the glue so you need to lover the touch sensitivity. for this get the touchscreentune app from the market. it works with galaxy note and galaxy s2. put the sensitivity from the recomended 25 to 50.
the best thing about this procedure is that i dont have to worry about the f ing glass anymore. if it brakes again i'l just order another one and in under 2 minutes i can replace it. all i have to do is get the phone case off, put a suction cap on , , remove the old glass , and put the new glass. that's it.
because it takes 4 to 8 hours i would recommend the process to be done in 3-4 sessions as people would get tired after 2 hours of work and tend to lose focus, attention, patience and start to push to get it faster done, and that's when bad stuff happens like yellow spot burn on the screen or small scratches. another thing about scratches, even if u manage to scrach the screen dont worry to much as the scratches are almost invisible when the screen turns on. youl see what i mean ....
i do have one question: WHY DID SAMSUNG DECIDE TO GLUE THE SCREEN TO THE GLASS INSTEAD OF HAVING THEM SEPARATE LIKE ALL THE OTHER TOUCHPHONES?

I do the same for Galaxy S. I removed broken pieces of glass from device using guitar pick and carefully glued a new glass on each side. 9$ (free delivery) on ebay.

blank for future use
blank for future use

anonymous572 said:
I do the same for Galaxy S. I removed broken pieces of glass from device using guitar pick and carefully glued a new glass on each side. 9$ (free delivery) on ebay.
Click to expand...
Click to collapse
what kind of glue did you use? where did u get the glue from? how did u do it?
i didnt glue the glass back to the screen. i just put the glass on the frame. to fill the void where the glue was i trimed a regular screen protector and put it inbetween the glass and the screen. but it works same without it.

Very interesting, I didn't think it was possible because the glass is glued to the SAMOLED panel. I'm very glad that I am wrong.
As much as I hate to think about it, a guide like that would probably come in handy for many of us at some point.
*knocks on wood*

pboesboes said:
Very interesting, I didn't think it was possible because the glass is glued to the SAMOLED panel. I'm very glad that I am wrong.
As much as I hate to think about it, a guide like that would probably come in handy for many of us at some point.
*knocks on wood*
Click to expand...
Click to collapse
Nothing is impossible with the right tool and know-how . The glue could probably be uncured with a heat gun, just like ipad. The challenge is not damage the panel and make sure it is dust free after put back the replacement.
It is said impossible because of the difficulty involved. If you can't manage to install a screen protector with perfect alignment and zero dust spike, this task is not for you.
@drevilatwork Thank you for writing this step by step guide!

I dropped my phone last night and it landed face down, cracking the glass.
I'm so upset, but I don't think I have the skills or the tools to do this job myself. I am relieved to learn that the glass can be replaced, but do you know whether the Samsung agents are likely to be able to do this?

they probably wont do it. but you can try showing this thread to some technician or phone repair shop and they might do it for you. they also might charge you a lot to the point where it might be more convenient to just buy a new 260$ screen.

looks scary dude

all im going to say is good luck separating the 2 screens without breaking the lcd or scratching the crap out of it ... this is a 90% epic fail method but thumbs up to the few that may succeed or dont mind their screen looking like its been belt sanded...

Its worth a try, since screen replacement costs 230 euros.

kawgirlval69 said:
all im going to say is good luck separating the 2 screens without breaking the lcd or scratching the crap out of it ... this is a 90% epic fail method but thumbs up to the few that may succeed or dont mind their screen looking like its been belt sanded...
Click to expand...
Click to collapse
actually .. the funny thing is that even if u manage to screch the screen and / or leave dirt behind it doesn't show while the phone is on. it might show when is off but not when is on. i was suprised about that too. and secondly, having to do it again knowing what i know now i would do it without leaving a mark. and in the end is certenly worth a shot before ordering the 260$ screen assembly. the special thing that it requires is pacience and attention.

Why different prices for all the same lenses in this shop ?

drevilatwork said:
actually .. the funny thing is that even if u manage to screch the screen and / or leave dirt behind it doesn't show while the phone is on. it might show when is off but not when is on. i was suprised about that too. and secondly, having to do it again knowing what i know now i would do it without leaving a mark. and in the end is certenly worth a shot before ordering the 260$ screen assembly. the special thing that it requires is pacience and attention.
Click to expand...
Click to collapse
as i said good luck with it and hope you make some money doing it..... ive successfully done the same thing myself but other than it will never look good like a factory screen (not even close), the amount of time it takes to make it look anywhere near acceptable (not like a 10 dollar repair) is big and that makes the repair not really worthwhile doing it for anyone but yourself and even then who spends 700-800 dollars on something and does a repair that makes it look cheap... then theres the whole ordeal of the membrane youre taking the adhesive off of along with the HUGE chance of damaging it.. it is placed with precision and adhered for a reason along with being dust and scratch free... this is a repair that just wont last because things will start functioning improperly for multiple reasons...
im not knocking you or anyone who tries this..im just trying to emphasize the dangers, downfalls and the probability of it being a legit solid repair. also the resale value when the next greatest thing comes along... just beware....

Hmmmm
Well chaps I hate to disagree here, but after speaking to the technical bods at Samsung it appears that the OLED is NOT glued to the glass, but the glass is laminated and bonded in, much like a car windscreen. My screen got broken the other day and I have read the 2 posts on XDA regarding this. Now if you go and have a look at the pics of the other post
http://forum.xda-developers.com/showthread.php?t=1487716
you can clearly see the OLED, although broken, seperated from the glass with no sign of any glue. The reason it broke is that upon heating the glass you will melt the glue, which will then stick to the edges of the OLED and if you pry it at the wrong place/time/too hard/whatever you will break the OLED as it is glued to the bezel itself. So when my glass arrives I am going to attempt to remove the glass using fishing line and pulling it between the glass and the bezel and OLED to release it, the same way as I used to remove car windscreens, and post the results here. I have also been told that the reason for the sticky "epoxy" mess that you encountered in this postis from melting the plastic on the back of the glass (which is the lamination!) by using too much heat.....I mean come on, a heat gun is a bit excessive!! Prying the screen out a bit at a time might work, but will surely end in tears, where as cutting the cold adhesive with a fine nylon cable, which wont scratch the OLED, might just work. I'll keep you posted on my results.

Just throwing an idea out there: maybe the adhesive would be easier to defeat when it's really cold, rather than really hot. I know a lot of adhesives become quite brittle when you put them in the freezer, superglue and epoxy for example. And the electronics/plastics of the display could be relatively fine with the low temps.

pboesboes said:
Just throwing an idea out there: maybe the adhesive would be easier to defeat when it's really cold, rather than really hot. I know a lot of adhesives become quite brittle when you put them in the freezer, superglue and epoxy for example. And the electronics/plastics of the display could be relatively fine with the low temps.
Click to expand...
Click to collapse
this is not one of them...i can guarantee this 100%
learn how a digitizer is made then you might see the light, and not just the light of white trash repair and failure...
ive explained it in great detail many times... and btw just because im a girl doesnt mean what im saying is wrong... 20+ years in the industry gives me sort of a clue as to what im saying..
im trying to help people avoid a long drawn out disaster and to waste $20(which is NOT gorilla glass) plus all of the other things they buy to try to make this a success which will never happen...
and fyi freezers, superglue and epoxys are big no no's...they are not used by any factory so there is another myth busted... they will just add to the destruction... 100% guarantee

kawgirlval69 said:
this is not one of them...i can guarantee this 100%
Click to expand...
Click to collapse
What do you mean? One of what?
learn how a digitizer is made then you might see the light, and not just the light of white trash repair and failure...
Click to expand...
Click to collapse
I know how a digitizer is made.
ive explained it in great detail many times... and btw just because im a girl doesnt mean what im saying is wrong... 20+ years in the industry gives me sort of a clue as to what im saying..
Click to expand...
Click to collapse
I had no idea you were a girl and I don't see why that matters. Experience is the industry is of course relevant, if your particular field in the industry was related to repairs. But I don't know if it is?
im trying to help people avoid a long drawn out disaster and to waste $20(which is NOT gorilla glass) plus all of the other things they buy to try to make this a success which will never happen...
Click to expand...
Click to collapse
The glass on the Note is Gorilla glass: http://www.corninggorillaglass.com/products-with-gorilla/full-products-list
and fyi freezers, superglue and epoxys are big no no's...they are not used by any factory so there is another myth busted... they will just add to the destruction... 100% guarantee
Click to expand...
Click to collapse
I didn't say factories use superglue or epoxy, or freezers for that matter. But the fact that factories don't use them doesn't mean it can't work for DIY repairs. Low temperature brittleness isn't exclusive to epoxy or superglue. Many, many glues (and other materials) have that property.

pboesboes said:
What do you mean? One of what?
I know how a digitizer is made.
I had no idea you were a girl and I don't see why that matters. Experience is the industry is of course relevant, if your particular field in the industry was related to repairs. But I don't know if it is?
The glass on the Note is Gorilla glass: http://www.corninggorillaglass.com/products-with-gorilla/full-products-list
I didn't say factories use superglue or epoxy, or freezers for that matter. But the fact that factories don't use them doesn't mean it can't work for DIY repairs. Low temperature brittleness isn't exclusive to epoxy or superglue. Many, many glues (and other materials) have that property.
Click to expand...
Click to collapse
i mean exactly what i wrote... as per your idea... this wasnt one that would work... my god man do i have to spell everything out for you???
obviously you dont know how a digitizer is made or you wouldnt have spouted the crap you have... bottom line
the girl part..well some dont think women know anything..its a culture thing.. but as for you not knowing if my particular field in the industry was related to repairs my god ive only said it multiple times in multiple posts... but since you dont like to read i'll say it again..20+ years board level factory trained.. motorola, audiovox, nokia, samsung... and this is a samsung forum so i think i have my tech qualifications covered here... again READING IS GOOD... work on that...
again you just dont read or have horrible comprehension because i never said the notes screen wasnt gorilla glass i said the $19 one wasnt... seriously every time you type something you dig yourself a deeper hole...
your superglue and epoxy blather just shows you dont have a clue and dont read... really they dont have any place in the screen/lcd part of diy.. its just trouble looking for a place to happen... now if the plastic housing needs repaired maybe but still not a top ten choice... if you had a clue you would know the proper adhesive to use... and its easily found... you are just too much...
seriously...just give it a rest... i wasnt bashing on you and have said it ive also said all im trying to do is help people not make a bad decision... and THIS IS A BAD DECISION...
you want me to play nice (which i really am..most other forums here would have totally lowered the boom on you for spouting crap... ive been really nice.. to keep it that way just go post somewhere where you can be productive... here youre not... im sure you have some great ideas but nothing you have said in this thread is remotely good.. sorry but it is what it is...
beep beep

kawgirlval69 said:
i mean exactly what i wrote... as per your idea... this wasnt one that would work... my god man do i have to spell everything out for you???
Click to expand...
Click to collapse
The sentence made no sense considering what it was replying to. Not my fault you were unclear/ambiguous.
obviously you dont know how a digitizer is made or you wouldnt have spouted the crap you have... bottom line
Click to expand...
Click to collapse
Ok?
the girl part..well some dont think women know anything..its a culture thing.. but as for you not knowing if my particular field in the industry was related to repairs my god ive only said it multiple times in multiple posts... but since you dont like to read i'll say it again..20+ years board level factory trained.. motorola, audiovox, nokia, samsung... and this is a samsung forum so i think i have my tech qualifications covered here... again READING IS GOOD... work on that...
Click to expand...
Click to collapse
Reading is very good, but you can't assume everyone in a public forum has read every single post of yours and remembers every detail. What isn't helping is the lack of proper punctuation and formatting which make your posts unpleasant to read.
again you just dont read or have horrible comprehension because i never said the notes screen wasnt gorilla glass i said the $19 one wasnt... seriously every time you type something you dig yourself a deeper hole...
Click to expand...
Click to collapse
Replacement screens are generally OEM parts.
It might appear I'm in a hole, but that's only because I live in Holland and am below sea level. I assure you I haven't done any digging.
your superglue and epoxy blather just shows you dont have a clue and dont read... really they dont have any place in the screen/lcd part of diy.. its just trouble looking for a place to happen... now if the plastic housing needs repaired maybe but still not a top ten choice... if you had a clue you would know the proper adhesive to use... and its easily found... you are just too much...
Click to expand...
Click to collapse
I wasn't suggesting to use superglue or epoxy, read it again.
seriously...just give it a rest... i wasnt bashing on you and have said it ive also said all im trying to do is help people not make a bad decision... and THIS IS A BAD DECISION
Click to expand...
Click to collapse
I get that, and appreciate your concern. However, you should understand that some people like to try things even when the chance of success is not very high. You seem to be one of us in that regard (you attempted repairs yourself too, right?), so I don't see why it upsets you so much.
you want me to play nice (which i really am..most other forums here would have totally lowered the boom on you for spouting crap... ive been really nice.. to keep it that way just go post somewhere where you can be productive... here youre not... im sure you have some great ideas but nothing you have said in this thread is remotely good.. sorry but it is what it is...
beep beep
Click to expand...
Click to collapse
I don't care if you play nice or not. I appreciate honesty. Now for some honesty in return: you're not helping in this thread.
All you do is say people's ideas are stupid without giving arguments that aren't arguments from authority. And I would very much appreciate it if you would stop misrepresenting my posts (intentional or not).