hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
What about DNS??
plasticplanet said:
hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
Click to expand...
Click to collapse
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
ref clutter
jmermel said:
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
Click to expand...
Click to collapse
i would but seems like no one has bothered to help out in other threads either
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
yep
TML1504 said:
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
Click to expand...
Click to collapse
hello...yep..everything is entered correctly..as i say ive been setting them up for years..this one connects fine..have all the boxes ticked but cant actually use the internet..works fine on all my other wm units
Stupid question tbh but I see this sort of thing every day nearly..
Your subnet is the same as the router yes? Does dhcp allocate one out to you or have u got a static ip on the phone?
Despite being connected to the wifi access without being on the same network you will not gain net access.
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
ref
hotmail said:
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
Click to expand...
Click to collapse
hey..thank you for having little think about it..but im in the uk..t-mobile and those settings having nothing to do really with connecting to my wifi at home..except tell my phone it can..which i did..
all the settings are correct...exactly the same settings im using on other wm devices but when they say its connected i can actually do something..rather than on the diamond where it says its connected but doesnt allow me
ive set the phone up identical to another wm6 phone in every way..that connects fine and i can use my wifi ..this phone i cant
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
hey
marisa4755 said:
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Click to expand...
Click to collapse
i have tried all except find someone else with a diamond..activesync connects fine and can connect when in sync..as ive said before i have another wm6 device..connects exactly the same way and works fine..this just wont..well connects but doesnt allow me to go any further
yahoooooo or wifiiiiiiiiiiiiiiiiiiiiiiii
BottchDK said:
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
Click to expand...
Click to collapse
well thank you guys very very much...ive used a combination of BottchDK and marisa4755
i removed my wifi connection and forced it to connect from default again..entered my passkey..wacked the old wifi on full power and NOW HAVE WIFI
it does seem devilishly slow though..but think ive read that on some thread before..think will have a looksy about that...
MANY MANY thanks again
Excellent news!
oh no it wasnt actually wifi !!!!!
marisa4755 said:
Excellent news!
Click to expand...
Click to collapse
hey all..sorry but the problem still exists !!!
cant connect..looking at lan settings..
status - Associated to network
it shows connected but status only associated..please tell me when the smeg is going on with this darn diamond before i through it against the wall !!!
This was the solution for me
I have had the same problem Imy phone even should be picked up by the repair centre then as a last try someone gave me the idea to change the leaver at wireless lan/energymodus to the left (best conection) and whala, I have tried it later whit my phone almost on the wirelesspoint to set it to best batterymode but not even at the middle it would do anything, it says conected but no data is comming to the phone, just when the leaver is at his almost left it will work.
Good luck.
Willem
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
yep tried all
Mr.Eliot said:
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
Click to expand...
Click to collapse
hello again..yes tried hard reset..have the power set to max..clicked my heals together 3 times also !!!
never in my life have i had such i problem..must have had dozen wm based phones which none of them i had this problem..still have wm2003 unit..wm5 and 6 unit all of which will connect just fine..i dont have the mac filter setup on my router
(
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
ive checked
Mr.Eliot said:
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
Click to expand...
Click to collapse
yep gprs works fine..looking in the wifi i have all the mac address ip speeds blah blah you could ever wish wish for..just as you would expect if it was connected..which it says it it..but only associated lol
hi everyone. im new to the forums. i just recently traded out my l7 for a tilt. And i love it. the only problem is im not on a great plan. No unlimited internet or text.
So i do most of my browsing using the wifi on the phone online. but ive been wondering if there was a way to disable the phone from actually using the cell phone service to connect to the internet. Id rather just stick to my wifi that i use at home or in other locations. cuz im afraid im going to rack up the phone bill.
if anyone can explain how to do this it would help out alot.
thanks in advance.
disabled internet
what you normally do before asking for help is search the forums. The search string "disable internet" we do the trick.
try it
Might work...
If you don't mess with your settings often, you could simply delete the internet settings. Search as was suggested, but I think settings>connections>connections and deleting those settings should prevent your tilt from connecting. If you never text, ask your carrier to block data access.
NoData
i had the same problem and found that Modaco.com had created some software called Nodata
ths enables you too enable and disable all data connections.
find it here:
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility/
hope this helps
i just delete the last letter of the APN so that the device errors out when it tries to use data. will take a look at the modaco.com link thanks for sharing @madgerald
Whenever I sync up my diamond with my laptop, I lose wireless connection on my laptop to my wireless router. Then when I disconnect my diamond, my laptop wont reconnect to my wireless network. It the takes a few hours and a couple of resets on both laptop and router before I can reconnect. Can anybody help? I have no idea how to stop this.
many thanks in advance
Adam
I'd say that you need to change the order that the computer chooses from the connections when it connects to internet.
I think that default is that it uses any cableconnection before the wireless..
Try that and see if it sorts it our for you
Thanks, any ideas how i do that?
adamdabby said:
Thanks, any ideas how i do that?
Click to expand...
Click to collapse
In windows xp professional got to Network Connections->advanced->advanced settings... and make sure that the wireless connection is at the top.
Thanks very much. I will try this later when I get in from work.
you're welcome!
tell me if it doesn't work and i'll try another way to figure it out..
Hey there guys. Im under a contract for my phone at the moment and the mobile internet (HSDPA/3G) connection is not free.
Is there a way I can totally DISABLE all applications from connection to my connection without my permission?
Please help
Thank you
What about the app 'NoData'. Maybe what you're looking for. Found somewhere on this site I think. Used it for ages and seems to work well.
Yes, the NoData application is the best thing to do the job. Easy, simple and basic. It even tells you when disabling connections that it is your responsibility to make sure DATA connections have been closed.
so i was trying to get vnc going on my pc/nook and ended up killing my internet capability on the nook.
im connected, and have reconnected, to my wifi but it has not solved the issue.
anytime i try and load any internet using app, it just closes. xda app says "missing internet permission"
wtf mate?
Happened to me once...
Try deleting the saved password for the wireless connection and then unplugging the router, then plug the router back in and reconnect...
Worked for me.
P.s. you can delete the save password by going to:
Settings>wireless and then by tapping your wireless connection and selecting "forget"
urbanengine1 said:
Happened to me once...
Try deleting the saved password for the wireless connection and then unplugging the router, then plug the router back in and reconnect...
Worked for me.
P.s. you can delete the save password by going to:
Settings>wireless and then by tapping your wireless connection and selecting "forget"
Click to expand...
Click to collapse
no luck
i ws playing around with the overclocking kernels when things got screwy, so i guess im just gonna restore and see how that goes,
jewnersey said:
no luck
i ws playing around with the overclocking kernels when things got screwy, so i guess im just gonna restore and see how that goes,
Click to expand...
Click to collapse
I see...
Good luck in getting it working again.
after i restored data it started working again.. ???