Related
I was trying to flash my trinity but i am having problems,
I can get the phone into the bootloader mode without any problems
and the software see the phone ok but the update only gets 1% before it fails with "error 270 image is corrupt" i have tried many different image but the same occurs with them all.
My phone now only goes to the splash screen
is there any think i can do?
take a look at this thread, it may help you unbrick your Trinity...
thanks but no , my phone is not stuck in the bootloader just will not flash
Go HERE they might have a solution there!
Please don't double post! It will not give you a solution twice as fast
Hi. I had the same issue and solved it. feel free to send a MP if you still need help
Thanks still can not get working.. sent a pm to tonio94 thanks mate
Error 270
Hi m8,
Your error 270 is because your phone is still locked and the ROM(s) you are trying to flash are not natively signed for use on your particular phone!
You can either...
1. Pay to get your phone unlocked
2. Set your phone with Hard-SPL (see the related sticky on this very Forum)
3. Extract the .nbh file from the ROM you are trying to flash and flash it using the SoftSPL (SSPL) - again see the sticky on this very Forum.
Not being funny, but you really must do a bit of background reading before you start messing with these new ROM's on your phone.
I hope this helps - PM me if you need more detail.
Moz.
Same problem
Hello,
I've followed the thread to unlock cid/sim my 3600, but I can't upgrade nothing. I can't upgrade hardspl to.
With all roms, the phone stay on tricolor screen after "Yes" to allow enterbootloader.exe, and the rom tell me that the device is not connected.
Active sync was ok, the phone battery to.
Help?
I've 1.23.406 rom actually, and spl 1.07 ds.
EDIT: I've the soluce. I use the SSPL-TRIN for each upgrade, before the hard spl, before passing in 1.41, et now before the ROM, and it runs!!
I had not understood the thread about sspl-trin to bypass, so I didn't use properly.
Now it's ok...
Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.
Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.
hi
it seems my touch diamond is broken!
the phone in wake up hangs and just show me the htc logo!
after hard reset the phone just show me "touch here to launch touch flo" and nothing else!
and when i tap there,nothing runs!
and after 2 or 3 minutes its show me the tourial video for how to use device and after many second the video paused and nothing works!
i dident hspl or flashing any rom on my phone so far and now i can do nothing to fix it!
active synce was not connect because the phone goes to video and dident let it!
i cant flash any rom even from internal memory because the device was not hspled!
can any one help me?
______
excuse me for my poor english
TUTORIAL Reply
So you are saying that after flashing a custom ROM, YouTube isn't working right?
- 2 Bunny
kainppc6700 said:
So you are saying that after flashing a custom ROM, YouTube isn't working right?
- 2 Bunny
Click to expand...
Click to collapse
?!!!
where is the youtube and costom rom in my past post?!?!!
i told i dont flash any custom rom and any hspl so far!
my device have a official rom!
it hangs on htc logo in first boot at first
and make me to do hard reset
after hard reset,
the device boots succecfully
but nothing works!
i have no touch flo and the text was shown that click here to launch touch flo
but when i tab there nothing was happend!
after 2 minuts the device show the tourial video for how to use by itself and pause after many seconds!
and i cant do any thing!
nothing works and i have to soft reset device again and every thing that i told do repeat over and over again!
and i dont know what can i do!
please help me if u know what should i do to fix it!
Take it to sprint or where ever you got it.. if you want to try and fix it yourself you will have to hspl and flash a new rom. You can probably find the original rom somewhere but I would try to upgrade it if you go to the trouble to unlock it. Perhaps www.ppcgeeks.com has more active users..
Sent from my PC36100 using XDA App
jessesse said:
Take it to sprint or where ever you got it.. if you want to try and fix it yourself you will have to hspl and flash a new rom. You can probably find the original rom somewhere but I would try to upgrade it if you go to the trouble to unlock it. Perhaps www.ppcgeeks.com has more active users..
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
thanks my friend
"THE DEVICE SHOW THE TOURIAL VIDEO FOR HOW TO USE" Reply
HDRAGON said:
?!!!
where is the youtube and costom rom in my past post?!?!!
i told i dont flash any custom rom and any hspl so far!
my device have a official rom!
it hangs on htc logo in first boot at first
and make me to do hard reset
after hard reset,
the device boots succecfully
but nothing works!
i have no touch flo and the text was shown that click here to launch touch flo
but when i tab there nothing was happend!
after 2 minuts the device show the tourial video for how to use by itself and pause after many seconds!
and i cant do any thing!
nothing works and i have to soft reset device again and every thing that i told do repeat over and over again!
and i dont know what can i do!
please help me if u know what should i do to fix it!
Click to expand...
Click to collapse
If you haven't flashed any custom ROMs or used any third party YouTube applications, why are you so concerned about "the device show the tourial video for how to use"?
- 2 Bunny
his best option is to flash a stock rom.
that should fix it.
if it doesn't fix it and he has warranty take it in.
if it does fix it than..and only than can he HSPL the phone for custom roms.
WAIT Reply
thesteve42 said:
his best option is to flash a stock rom.
that should fix it.
if it doesn't fix it and he has warranty take it in.
if it does fix it than..and only than can he HSPL the phone for custom roms.
Click to expand...
Click to collapse
We've gotta find out what the problem is first. Hold your horses there, steeve ☺.
- 2 Bunny
it sounds to me like he has a corrupted rom or failed memory addresses in the phone.
the freeze followed by a no boot tells me something failed (hardware or software).
hard reset allowed for reboot, but not properly, indicating data corruption.
if reflashing stock corrects it (software corruption) than all is well.
if not (ROM or RAM failure) than phone needs replacement.
the diamond and pro run very hot, and are prone to hardware failure, causing odd behavior.
STEEVE Reply
thesteve42 said:
it sounds to me like he has a corrupted rom or failed memory addresses in the phone.
the freeze followed by a no boot tells me something failed (hardware or software).
hard reset allowed for reboot, but not properly, indicating data corruption.
if reflashing stock corrects it (software corruption) than all is well.
if not (ROM or RAM failure) than phone needs replacement.
the diamond and pro run very hot, and are prone to hardware failure, causing odd behavior.
Click to expand...
Click to collapse
We've gotta find out what the problem is first. Hold your horses there, steeve ☺.
- 2 Bunny
I was just suggesting how to find out what the problem was.
Hello,
I don't know what happened but the other day something really bad happened.
After unlocking my HTC HD7 really well (see here), my girlfriend also got he same phone that came with the same SPL and everything,
Went throught RSPL and HSPL fine, but when attempting to write a custom rom (latest from ansar, like I did to mine), at 5-6% throwed a write to flash error [226], and the only way to get out was getting out the battery
I tried a few more times without any luck, always stuck at 6% on the laptop and 5% on the phone, until once when I took the battery out, the phone didn't start again, no response on anything, battery, power plugin, button combination ...
What could go so wrong? I thougth that when having done RSPL and HSPL, installing ROMS couldn't brick the phone
I can change the phone once, but now I'm really scared even updating mine in the future
What does make the [226] errors? I searched a lot but found nothing, some people says the radio is to high? some the drivers
And what does going the phone from working in bootloader to brick? Maybe u have to wait some time before taking off battery after the write error [226] to make sure?
if you freshly dld the rom i suggest you to reload it from internet, then do a defrag to have your files cleaner than possible...hope you didn't do wrong with H/RSPL it could be harmful