Related
Hi
I have the newest firmware version installed on my Qtek 9090 (BA_WWE_14000_147_11200_Ship), and I experience a problem again which I had first when I bought my Qtek but was gone after I had installed Radio version 1.08.00:
Once a day I have to reset my Qtek because I can't hear the one I am calling - usually this happens when I call my mobile phone's answer phone. The phone gets connected but I don't hear anything. After a soft reset everything is fine again.
Is this a known issue? Any solutions to it? Ok - I know I can downgrade to 1.08 again but I dont really wanna do that. And yes, I can stop calling my anser phone ....
Anyone knowing what is causing the problem?
Reagrds,
A
I had the same problem with my Qtek 9090 until I stopped use the Bluetooth feature completely. Since then, everything is fine.
tot 1.12 radio has solved the "no sound" issue.
keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet
ThExSenatoR said:
keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet
Click to expand...
Click to collapse
i have tried 1.06 & 1.10, all are having that issue. that's why i have upgraded to 1.12 so far so good. umm.....................strange..
keeping_sg said:
ThExSenatoR said:
keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet
Click to expand...
Click to collapse
i have tried 1.06 & 1.10, all are having that issue. that's why i have upgraded to 1.12 so far so good. umm.....................strange..
Click to expand...
Click to collapse
For me, radio 1.12 delivered:
- worse signal reception
- higher battery consumption
- still no sound issue.
flashed twice & still having the bloody "no sound" issue. really give up. i think the next thing to change is the motherboard. sigh.........................
I had never had this issues untill I upgraded my Radio to 1.12 and then I had it 5 times in one day, went back to 1.10, no more issues
Hmm. This is a really 'odd' problem. I didn't originally have this problem with my SX66. Then, it just 'popped up' one day, and I can't seem to get rid of it.
I have tried different ROM versions (currently 1.40), and my radio version is at 1.10.
I have NEVER used radio 1.12, so I know that's not the CAUSE.
We need to compile a list of people with the problem, and see exactly what combination of ROM and Radio they have, as well as the programs they have installed.
if you read the cingular forums, there are a few folks there that say they have had it all along so I am not sure where to start...
umm....... different ppl have different problem. seems like it's a integration issue.
If you go to some HK forums, you will also find a lot of people suffering from this.
To me, I seldom use it as a phone. I only use it to receive emails and website browsing. When I go overseas and I used it as a phone with a BT handsfree (shut down GPRS connection), everything is just fine. I only encountered once with no sound problem when I take away my BT handsfree on a plane....
It's definitely a bug since a long time ago with old and new versions.....
Sad....and disappointed......
Hi all,
I upgraded my phone to the 1.12 radio along with the 1.40 CE ROM and am always resetting due to the "can't hear caller" issue and I never had this problem before.
I'm going to do a hard reset and see if that helps (clear out all the apps and use it for a day or so). If this doesn't work, I shall revert back to the 1.10 as I had no problems with that.
ROM 1.40.00
Radio 1.12.00
EXT ROM 1.13.139 (with Updated CallerID [1.20] and older version of O2 Active [3.0])
This cant hear caller issue, is it cant AT ALL hear caler or caller is so faint I cant hear him.
I ask as sometimes I get calls that are faint however when the caller rings back it fine. Not sure if its crap reseption or the device.
I got O2IIs from UK and had the same "No sound" problem. I have to SR about 5 times daily to sort it out. However, if I turn off Bluetooth (pairing with my Bluetrek G2) then everything's OK.
My ROM version is 1.31.00 WWE, Radio : 1.10.00, ExtROM: 1.31.139 WWE and BT 1.0.0 Build 3500
Had up to BT 3900 but wont help. Gonna up radio to 1.12. Will post the outcome soon.
I've only experience the problem once since the imate 1.40 upgrade.
Now, I must say that I don't use the phone THAT heavily.
I upgrade to 1.40 EX, it seems working fine, still the sound quality is not good enough...
people!
A guy called Derek has posted a possible solution to this problem here! http://forum.xda-developers.com/viewtopic.php?p=118364
It involves removing the Bluetooth for the startup because he believes that even with the bluetooth off, the unit is still trying to connect to a bluetooth headset.
I'm going to remove/unpair my Bluetooth Headset and see if that makes a difference. If anyone else can try this and post results I'm sure this would help loads of people.
Dom
Please confirm this and I will post it to wiki
@xdadom,
It's correct. As I mentioned in my post, when I "turned off" Bluetooth, everything's OK. The way I "turned off" Bluetooth is exactly the same with Derek did in his post, i.e. delete "Run_BTTrayCE" from Windows\StartUp\
However, I still need Bluetooth for my hand-free device. In my opinion, it's rather a trick, not a solution to kill "No sound" problem. Anyway, we can wait the updated BT version from supplier to sort it out.
The BA_DT_WWE_DutchRetail_14000_556_11300 has a new radio 1.13
I have converted this to a TYPE I file.
I have updated wiki with that info
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
It has been tested (that is to say the flash works)
Have fun.
Seems like the GPRS "cannot connect" Problem has been fixed in this stack.
Cant manually reproduce the problem like i used to be able to, so time will tell, but so far so good
problems with no hearing the caller
Is the problem "no hearing the caller" solved with this radio radio 1.13? I can't solve this problem. Can anyone help me?
Re: problems with no hearing the caller
chaniko said:
Is the problem "no hearing the caller" solved with this radio radio 1.13? I can't solve this problem. Can anyone help me?
Click to expand...
Click to collapse
Only time can tell, and it's to early to say yet.
Just upgrade to 1.13 radio.
Let's see.....
MDAIII,
Good job with the instructions which makes it very easy to upgrade. Works better than 1.12 radio. Wish the bluetooth would not give the "insufficient memory" error.
Thanks.
Updated to 1.13
Update works fine.
GPRS Problem seems to be gone. (Works here by now)
SMS works fine (1.12 gave me a little problem here)
Bluetooth works fine (Fast on/off)
Nothing to mourn ATM
No negatives yet here. Haven't encountered the 'no sound' issue yet. I haven't noticed any improvements, though.
I'm glad to hear about the GPRS. Has anyone tested the WiFi feature and how long it takes to connect to activestync? I have notices that my BA, after upgradeing to the new Shipped Asia ROM, takes a really long time to connect to activestync (about 1min.) compared to older radios. Which took at the most 5 seconds to make a handshare.
Will This work on a SX66?
hakushox, it will. Follow the instructions MDAIIIUser has laid out on wiki.
when i just tried it says its not designed for my phone
Then you didn't follow the instructions properly.
You can always use maUpgrade_noID.exe
sprite backup after upgrade??
hi all,
if i upgrade my radio and after the hard reset, i restore with sprite backup, will it downgrade the radio as well?
please reply urgently! i cant resist the temptation to upgrade!
will doing a Radio update only make me have to reinstall all my programs and settings....if so, is there an easy way around this.....
Doing a radio update WILL make you have to do a hard reset. You will get errors when you try to restore your backup using sprite. You will have to re-install your applications after a radio update. Thats why i;m waiting till my questions have been answered before I upgrade since I just upgraded the ROM last week.
TheLastOne said:
You can always use maUpgrade_noID.exe
Click to expand...
Click to collapse
I tried that on the TypeI Radio, diddent work. I diddent try it on the TypeII though but it should work.
studdocs said:
if i upgrade my radio and after the hard reset, i restore with sprite backup, will it downgrade the radio as well?
Click to expand...
Click to collapse
Well I did the nasty thing and used Sprite Backup to restore, wanted to try since this was only a Radio upgrade.
Works perfectly until now.
But to really test this new Radio, one should not use any Restore functions.
Okay, so only time will tell whether this new Radio ROM will fix the known echo issues during bluetooth carkit telephone conversations...
It's been like a day now, I assume peeps who upgraded yet would have made several phonecalls by now... :twisted: hehe
So... wots the verdict?.. :?
Edit: Nevermind, f*ck the verdict. I've gone in, full throttle. I'll let you know the outcome, going for a ride right now.
Hi,
well I have tried, still Echo :-(
I use Radio 1.13 now.
I have echo when only using the MDA and
I have echo when using a Lintech Bluetooth adapter in my Nokia Cark-91.
The first can't be a Bluetooth problem, the second one is a bluetooth problem, even after stack BT-3900.
So I think it's a great device, but as a phone it realy sucks.
I think the bluetooth is the biggest problem.
Hope it can be fixed soon.
Regards,
Max
Just HAVE a bluetooth insufficient memory error.
GPRS seems okay so far.
No caller hearing problem.
I'm having the same problem for a week now...
I was on the street with my BA making calls and all went Ok. I use it for my work, so I do lots of calls a day. Suddenly, I realized, when I call, that the other can not hear me, nor can I hear them! The counter is running, the screen says "Connected". I haven't done anything to change the configuration, nor it have dropped it from my pocket.
I'¡m getting crazy. I don't know what I've done wrong.
Things tried unsuccessfully: Crying or Very sad
-Lots of device resets..... Between tryes and Updates.
- Reinstalled WM5 using a different ROM. Now I have TM 1.3. [http://forum.xda-developers.com/viewtopic.php?t=42632]
- Upgraded Radio to 1.15 (previously, I had 1.13)
- Used a Bluetooth headset. It worked, I could hear the sound from the phone, at least. Only thru the bluetooth headphone. Still, I could not hear any phone-sound from the loudspeaker when I turned off the headphone and the bluetooth headset were disabled, even with the Bluetooth signal ON, as suggested on other post. Each try with a new call. The weird thing is that I CAN hear the loudspeaker when I hear music or the system sounds... :?
- "Installed" the Unidirectional patch (copied the AudioGW.dll file over the old one successfully, reset, etc..)
- Turned off the device and leave it off for a while. Take off the SIM card, touch it (cosmic vibrations Embarassed) Sometimes, before, the SIM card went a little nuts if I resetted the device too much -maybe Confused- or if I got the battery off...
- Last, I've downgraded to the latest WM2003 ROM. Formatted the Storage Space and resseted the Registry Hive. No change. All else is working.
My options are finishing ....
Sorry if this has been posted before, but, at this point, when I've been tried almost (I think) everything, i couldn't find anything relevant using search.
Please, any help will be greatly appreciated!!! Maybe I can use at least a link to another thread..
Thanks
try downgrade your RADIO to 1.13
I've allready upgraded to 1.15 because of this problem. Anyway, I've downgraded just now and nothing same problem..... also: I can not get the handsfree-loudspeaker mode (pressing the "call" button for a while). Just nothing happens
Let's hope mamaich or other cracks read this post
Thanks for ur answer
indra9110 said:
try downgrade your RADIO to 1.13
Click to expand...
Click to collapse
HEEEEEEEEEEEEEEEELPPPPPPPPPPPPPPPP ((
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Rom & Radio flashed again. At no avail
I've used, lastly, the "standard" Rom posted on I-mate website (www.clubimate.com) [ROM: 1.40.00 WWE; Radio: 1.12.00; Protocol: 1337.42], just to checkout and everything (regarding this problem) remains the same.
I've, however, noticed that, before, when I used the volume slider up, first the PDA-volume went up, later the phone-volume. Now it only fully moves up the PDA-volume. I think this have something to do...
Again: Please, help me!!!
Thanks for your answer!!
indra9110 said:
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Click to expand...
Click to collapse
Still the same after 3 flashing sessions
Two days ago, I've sent an e-mail to I-Mate. They have answered me yesterday telling me to hard-reset :?:evil: and if that doesn't work, to send the device to France or Portugal for fixing. Here on Spain there's no place where to send it.
I think it should be a software problem (maybe) that's why I'm asking help here.. Also, the problem with the volume slider up only occurs on W2003, not on WM5
What should I do??
Anyone?? HELLOO?
i've had this problem for a long time, and tried so many different patches non worked, but there is a way to deal with this issue u need to keep ur bluetooth on all da time or remove the file BTTrayCE from this directory
Mydevice>windows>start up
and copy this file to ur storage card if later u want to use ur Bluetooth so wat removing of this file does is that the icon in of bluetooth in tray bar will not appear automatically after u restart ur machine .
hope this helps
At no avail , but many thanks anyway.
I've seen this solution on other posts and I've tried it before. Without luck
Even the 'bluetooth on all the time' alternative. Without luck
Also, I'm now on TuMa 1.3 (WM5). The file relative to bluetooth on the startup folder is "BTIcon", wich I have moved as you stated. Without luck
Maybe the file you tell is for WM2003 ?? Could it be? Is the file named 'BTTrayCE' on WM2003 and 'BTIcon' on WM5?
I'm really desperate.
arran83 said:
i've had this problem for a long time, and tried so many ...
Click to expand...
Click to collapse
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
ok here is a patch that is supposed to fix this problem but hasn't worked on mine, i just attach it here it might work on urs, or u might already have used it.
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone.
I had a similar problem sometime back, and just put the headphone jack in there, jiggled it a bit and it started working. basically released the switch. your symptoms point to a similar problem...does not have anything to do with Radio ROM. Has not given me problem since then
here you go..
http://forum.xda-developers.com/viewtopic.php?t=33207
Yup, I've seen this forum before. If it has to do with a headphone problem, then It shouldn't be heard anytime, and I CAN hear music and such from the device when it isn't in a call. Anytime I put the device on the "call" state (dialing, connected, hold, etc..) the sound goes out. :-S
So, it should not be a headphones problem.... should it??
deepakr said:
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone...
Click to expand...
Click to collapse
Yes, I will, for nth time... No solution yet... I will apply the Unidirectional patch again on WM2003 to see... Keep you posted..
arran83 said:
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
Click to expand...
Click to collapse
OK, I've tried, for nth time, going back to WM2003SE (112 T-Mobile) and applying the unidirectional patch I've found here (I think is the same posted on the I-mate site I've tested before) and NOTHING changes...
Still the same problem.
Any clues?
hi !
try like me... in bt setting-->accessibility-->disable all access options..
to me this little trick cut off every problems on use the phone....
hi
OK, I'll give a try :? (Again going to WM2003, as I think is that what you have right?)
No Sound on BA
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Re: No Sound on BA
I can not turn on the speakerpone.....
pjax said:
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Click to expand...
Click to collapse
I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.
Hi
Tried looking through all the threads and checking what I have done but still no joy hence post.
Have upgraded my old BA PH20B (I have another one so no panic) to WM5 with the latest WM2k5_AKU3.2_32mb_v1.3.2 setting Operator to ORANG001 (Orange UK).
1st time I tried everything seemed fine except although I had a signal from Orange I couldnt ring the phone (went to answer machine) and if I tried calling out the call disconnected with 0min 0sec calltime. I did receive a text message saying I had missed a call (me calling phone to test). But couldn't make or receive calls.
So I tried again from scratch twice and both times I have no signal and in Device Info have "Radio version: NONE" - followed instructions to the letter anyone any ideas?
Cheers
RichardC
ps. I can re-flash ROM OK.
this happened to me, too. but only when i changed batteries...
try to soft reset until the word NONE is replaced by the radio rom version (during boot up).
good luck!
Thanks for that, did soft reset and suddenly I have a radio ROM, so removed battery and inserted SIM then no radio again. Soft reset and radio back...weird
Now I can make calls and receive text but can't call phone (engaged or answerphone, maybe network I guess) but also GPRS connection info wrong so guess better start searching for info on that now. lol.
Thanks for the tip.
Check out my signature - use the links provided.
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
Makes sense thanks...just the GPRS issue now. lol
Just stepped through GPRS settings not changing anything but clicked OK at the end and it works now. Looks like install didnt configure everything fully.
Weird issue I now have is dialling out cancels and yet the phone I dialled rings about 10 seconds later (very weird).
When receiving a call - nothing happens on the BA, no ringing down phone calling out from then when the network drops the call the BA makes a small burp sound. So it knows it should be ringing but something is stopping it.
Tried upgrade to 1.15 Radio ROM - same. So now going to try downgrade to original WM2003SE Radio ROM version (1.06) and see how that goes unless someone has another bright idea?
same issue here
I am now experiencing the same issue, suspect its battery related though...hope someone can come up with something better than that. :lol:
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
You'll need to update those links for the new forum it seems.
Tried everything but although it all worked phone usage was inconsistant. Sometimes calling out works, sometimes just drops call with duration 00:00. Sometimes receives a call, other times goes straight to voice mail or un-obtainable tone even when signal fine and 2nd BA running WM2003SE works fine (same operator, Orange UK). Bluetooth also needed re-boot most of the time to be enabled. So reverted to WM2003SE for now .
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
hirsty said:
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
Click to expand...
Click to collapse
Thanks for that I tried 12 and then finally went back to standard WM2003SE radio version out of desperation. Nothing worked.
When I have the energy! I may try upgrading my other (newer) BA to see if that helps but first I need to backup my current ROMS as it works faultlessly under WM2003SE...why am I thinking of upgrading I ask myself
Alhumdulillah
everything is working fine for me
AKU 3.2 owns
CAM is fine
ricardo there must be some other problem i hope u didnt drop the phone too many times
looks more like a hardware problem to me
Hi
Phone is 100% OK with WM2003SE, so not a hardware issue...may try again soon, thanks for input.
Hello i have problem with X1 ... About a week ago my phone hang up all outgoing calls after 12sec ...Upcoming call are longer but also hang up after 1min 30 sec
I tried everything,flashing up official rom,then putting some cooked ,i changed radio from 1.14 to 1.16 ,hard reset couple times ,the same thing every time...
I left the phone at service in my country ,they don't know what is a problem??? Strange...
I'm thinking ,maybe, you people know something to help me? Is it a chance for those problems are caused by flex cable? Everything working good on the phone...
Thank you everybody!
I to have this very SAME problem with my Xperia X1. I got to make a call to ANY1 and it just hangs up/ends call, on full reception/signal, and even with texts it says something like "Message not sent". I am looking to sell my Xperia X1 now, but REALLY need to fix this problem, and as the above user "Emrax" has already tried to "flash roms" and all those other things, I would say we both REALLY need an alternative and successful solution. Thanks
I to have this problem. What is causing this? My phone symptoms are similar to what is described here
Whenever I try to make a call, it sometimes takes the 2 or 3 attempts until it connects. Sometimes I can't hear the other person speaking either. Sometimes when I'm in a call, it hangs up too.
Whenever someone calls me, I can't hear the other people but they seem to hear me.
What is causing this?
I usually get 4 to 5 bars so reception is pretty good.
Try to installation the other dial-up panel
yinjianweizxc said:
Try to installation the other dial-up panel
Click to expand...
Click to collapse
Install the other dial-up panel? what other panel???
I've installed the 1.16 radio using the 1.14 .dll file. seem to be working much better and no hang ups during calls... so far.
whoseline said:
Install the other dial-up panel? what other panel???
I've installed the 1.16 radio using the 1.14 .dll file. seem to be working much better and no hang ups during calls... so far.
Click to expand...
Click to collapse
Sorry..My English is so-so...
"Sometimes when I'm in a call, it hangs up too",I had this problem until I flash the other ROM..I don't know what cause it...
same problem here :/
yinjianweizxc said:
Sorry..My English is so-so...
Click to expand...
Click to collapse
没问题！ ：） what ROM did you have before? does your new ROM solve the problem?
I think the problem relates to the phone changing from H, G or 3G and constantly looking for a better signal therefore hanging up during or before a call.
In the phone menu, I've set my band on GSM and GSM (900+1800)...
Seems to be ok for me so far although I have upgrade to the 1.16 radio using the 1.14 .dll file with it.
So the general solution to this problem seems to be upgrading the "Radio version" then? How do you go abour that, because I know how to upgrade or change "Roms", but not familiar wid "Radio"'s.
-DNA- from T-Mobile G2 XDA app
you can flash radio roms same as other roms
Aight then, thanks Draken Korin, but I don't even think my problem is as simply to fix as flashing a radio rom. NEED to try it though.
I've flashed the 1.16 radio and my problem has not been solved, but I'm glad others have had their's solved.
Djd10 said:
I've flashed the 1.16 radio and my problem has not been solved, but I'm glad others have had their's solved.
Click to expand...
Click to collapse
do you have the 1.14 .dll cab installed too? Do a search for 1.14 radio and install the 1.14 .dll cab.
Downloaded the "1.14.25.55" Radio zip folder but it does not contain the "1.14 dll cab", and I can't seem to find it anywhere on the development or general forums, althought I remember it being talked about before. Would I have to have the above "1.14" radio version installed for this "dll cab" thing?
radio and ril are separate and can be combined differently (though I wouldn't try a newer ril with an older radio, no sense in that)
just check my sig for it, gl
Well thanks, but what's "sig" though, and do you think this will solve my no calling or texting problem?
-DNA- from T-Mobile G2 XDA app
Djd10 said:
Well thanks, but what's "sig" though, and do you think this will solve my no calling or texting problem?
-DNA- from T-Mobile G2 XDA app
Click to expand...
Click to collapse
you were looking for the rilphone.dll 1.14.*, which is available via link in my signature
personally I don't think it will solve your problem, but it's worth a shot and I don't have a better idea right now
Aight then, thanks for the help and I'll try that.
-DNA- on HTC Wildfire XDA App