Hi there!
I'm about to receive my o2 XDA Diamond in a few days.
As far as i know already, there are differences between the german o2 xda diamond and the "original" HTC Touch Diamond.
Can someone please list up these differences?
I thougt about buying equipment to the phone (car mounts, battery packs and so on), but i'm unsure about wheter they will fit or not.
If the difference is just the case: does anyone know wheter there are replacement cases so i can make sure my xda diamond will fit any htc diamond equipment?
Thanks in advance,
Incom
O2 is the same as the HTC physically apart from the corners on the HTC are angled. All mount/accessories will fit fine
underzone said:
All mount/accessories will fit fine
Click to expand...
Click to collapse
Replacement backcovers for bigger batteries too?
hmm, noone knows?
Related
Hello
Does a Pharos Battery fit in a Diamond?
Some users say yes...
Andi
Look at this one!!!
http://www.smartphoneshop.nl/product/54597/52822/3322/adapt-battery-htc-touch-diamond-1100-mah.html
Sorry... i don't speak other than English & Greek, so... does it need an extra back cover or not?
1340mah
this one needs an extra back cover, which is included
http://www.pdamax.de/?art_nr=hz-265&ausWG=Touch_Diamond
anything new to this?
this shop offers the pharos battery for the diamond
http://www.cyberport.at/item/2/1/0/111970/akku-fuer-htc-touch-diamond-p3700--pharos-p3470.html
is this a mistake or does it really fit?
i saw these pharos batteries for diamond at many shops online, also the distributor store i can acces had it. but most of them deleted the diamond aout of specs-list.
in the moment the battery isn't available at the distributor, but i think i will give it a try!
any pharos users could help there, too, could you just post the excat dimensions of the pharos battery?
oddball1 said:
Look at this one!!!
http://www.smartphoneshop.nl/product/54597/52822/3322/adapt-battery-htc-touch-diamond-1100-mah.html
Click to expand...
Click to collapse
Hmm the + - terminals seem to be in the wrong place. Think I may give it a miss .. Good find though
it won't -definitely- fit to the diamond, i just asked for the dimension in the pharos forum...
http://forum.xda-developers.com/showpost.php?p=2378396&postcount=2
Hi all,
Please excuse my ignorance, I have searched this site for this question, but not found it... Sorry if it has been posted previously.
I am looking to buy a HTC Touch Diamond, but am I worth getting the Orange version (original?) or the O2 version (XDA Ignito)? The only difference I can see is the back cover and some additional software which the great people on here have far superior anyway ... Am I missing something?
Also, are the older versions (see site at bottom) still available? - the ones that have 128MB RAM instead of the advertised 192MB?
I'm looking to get this handset from a cash-back site so expect that they may be using old stocks... Is there any way to tell without opening the box (so it can be returned without question under the distance selling regulations)?
Thanks for any help.
Aubs
http://www.tracyandmatt.co.uk/blogs/index.php/2008/05/07/htc_touch_diamond_in_action_video
I work for O2 and i've used our demo version of the diamond quite a lot and I also own the Orange one.
I bought the Orange one off ebay instead of waiting for the O2 branded one and I have to say the build quality on the O2 seems far more solid. The buttons feel sort of.. firmer.. and the back is much nicer than the faceted one.
I wish i'd waited for the XDA version to be honest =']
Hi Sherby,
Thanks for your comment I can't see how there could be a difference with the buttons or build quality, I thought that would have been something HTC created not modified by O2... I appreciate the back cover as it just slides off... Will have to pay Orange and O2 another visit Thanks!
Aubs
Also.. the O2 version is slightly more glossy around the edges than the Orange one which is just matte.
Sherby said:
Also.. the O2 version is slightly more glossy around the edges than the Orange one which is just matte.
Click to expand...
Click to collapse
Ahh ok. Don't think I'm that bothered about the glossy or matte though, could put up with either
Any idea about finding the hardware version?
Thanks again
Aubs
I have the o2 version, simply because I didn't favour the original diamond shaped back. Device information page attached...
Thanks for that GanjaBlood - I was considering the same, but if you can just remove and replace the back facia then it isn't really an issue... They'll be on fleebay soon!
The Ignito battery cover won't fit the Diamond. The corners are different for starters.
ruffage said:
The Ignito battery cover won't fit the Diamond. The corners are different for starters.
Click to expand...
Click to collapse
That is something I didn't know... Thanks Ruffage.
[EDIT] Sorry, just seen the 'accessories' forum... Please ignore the question below, hopefully it's answered there [/EDIT]
Does anyone know if the replacement batteries that O2 are apparently selling will fit into the Orange TD?
Thanks for everyone's responses.
Aubs
has anyone any ideas where to get a digitizer for the Topaz? Found one on ebay but it doesnt look like it would fit Diamond II...
any help appreciated
You've broken yours already?
Doubt you will have parts available anytime soon!
no i'm not that bad with phones
my touch hd is safe and sound, just bought a broken diamond 2 as a diy project but i guess will have to leave it on the shelf for a good while..
Found this for you:
http://cgi.ebay.co.uk/TOUCH-SCREEN-...s=66:2|65:16|39:1|240:1318|301:0|293:1|294:50
Is it same one you were looking at?
DaBountyHunter said:
Found this for you:
http://cgi.ebay.co.uk/TOUCH-SCREEN-DIGITIZER-FOR-HTC-TOUCH-DIAMOND-2-II-T535X_W0QQitemZ310140666773QQcmdZViewItemQQptZUK_MobilePhones_MobilePhoneAccessories_MobilePhoneBatteries?hash=item310140666773&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A16|39%3A1|240%3A1318|301%3A0|293%3A1|294%3A50
Is it same one you were looking at?
Click to expand...
Click to collapse
For me this two digitizer have the same size, so how can this fit on diamond2?
So awkward!
Good point! Maybe it should be described as Diamond 1 digitizer styled like Diamond 2
actually just bought that one
was in talks with the seller because he had another one listed as diamond II but now he assures me this is the right one...will wait and see I suppose..
Just got my broken D2 in the post, looks great, nice design, decent size but would never trade my HD for it
if you could post pictures etc on how you get the housing off id appreciate it as id probably want to do this down the line.
will do once I do that myself will have to google it first I suppose...
Waiting for my digitizer to come in the post, will start my DIY project then
got the digitizer, turns out to be the wrong one, they still dont have any in stock for Diamond II
but managed to hook up the DII using Pocket Controller, works a treat
bluetooth mouse and keyboard can be connected to it no problem using Blueinput, all I have to do now is figure out how to control the DII from my HD
I search one too... I mailed tens of sellers on ebay and they can't provide me this...
I eventually gave up and sold it on
got an omnia hd now, will see whats that like
I puts back him on sale because I have to repair my Touch Pro :
http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESELX:IT&item=110412407398
mndgz said:
has anyone any ideas where to get a digitizer for the Topaz? Found one on ebay but it doesnt look like it would fit Diamond II...
any help appreciated
Click to expand...
Click to collapse
http://www.lelong.com.my/enjoys-lcd...amond2-ii-t5353-sp-K808338-2007-01-Sale-I.htm
you've seen the date?
I am currenly searching online for a desktop cradle for my HD2.
The ones that appeal to me are advertised to fiot the T8585 ONLY.
I have the Australian Telstra Version of the HD2 which is the T9193.
My question is will my T9193 fit T8585 Accessories? such as Desktop Cradles/ cases/ batteries etc
I appreciate any help or advice
Thanks
Djob said:
I am currenly searching online for a desktop cradle for my HD2.
The ones that appeal to me are advertised to fiot the T8585 ONLY.
I have the Australian Telstra Version of the HD2 which is the T9193.
My question is will my T9193 fit T8585 Accessories? such as Desktop Cradles/ cases/ batteries etc
I appreciate any help or advice
Thanks
Click to expand...
Click to collapse
Yes. Everything (and I mean everything) that physically works with the T8585 will physically work with the T9193.
Thank you for your reply. That is the answer I was hoping for.
________________
HTC HD2 T9193/Cookies/HDWall
friend'scatdied said:
Yes. Everything (and I mean everything) that physically works with the T8585 will physically work with the T9193.
Click to expand...
Click to collapse
Thanks that is very helpful
I got some Micro USB wires & travell charger from
CellPhoneShop & turns outthey are in Hong Kong
but when im charging the phone
my phone shuts off or doesnt respond when i press its buttons
could it be cheap wire or compatibility issue ?
Thanks
I want change my digitizer to multitouch...
tikuh said:
I want change my digitizer to multitouch...
Click to expand...
Click to collapse
As far as I know is the default screen multitouch, and I think there is no other phone model screen you can modify on your HD2 :/
Thanks for info...
Sent from my HTC HD2 using Tapatalk
The default one is multi-touch. You can normally find them rather cheap on ebay if you need one. Sometimes you can get lucky in the Marketplace here on XDA.