Hi everyone, this is another midnight that i spend to find a way to recover my new used phone.
Please, really please, help me.
This is the problem:
A friend gived me his Tytn ii phone.
W.M 6.* .. i can't remember the right version.
this is what i did:
1) unistalled skype
2) re-installed skype
3) unistalled ohoner
4) installed winterface
5) uninstalled a register tool.
6) my memory stop at this point...
It stayed alive a couple of day and now.. STOP!!
it doesn't boot anymore.
This is what "he" do:
0) He vibrate
1) T-Mobile logo (he was germany)
2) RGB information
3) Black screen
4) HTC animated logo
5) Maya v1 logo (with his stone face)
6) STOPPPP
Sometime it looks like alive, if I open the phone the screen change, and stand out a lot of colored lines .
Sometime if a press all the keys i can press, appear the alignment wizard.
I try to align, and after a white screen, phone blocks.
I only want to recover my friend's contacts.. nothing else.
If i'll could do, i could think to rebuild the flash... BUT....
but but but but... but i need you!!!
i still belive...
maybe in a htc center,,,
what do you think about?????
thanks a lot
Malteni.
If you can't boot, I don't know that there is anything you can do. Can't even flash the ROM without being able to sync.
So, there is no way to recovery "my" contacts...
Maledizione....
I have to say something on that too. First: You can flash a ROM using the bootloader only. That works and will surely recover the phone. But the contacts will be lost then.
Have you tested Active Sync? Sometimes it is in the align screen windows and you can already use Active Sync then. I'm not sure about the Device Center Vista uses. Try to get the phone connected maybe it works.
Related
Hi all. I got my Kaiser on Monday and am VERY pleased with it. Like pretty much all of the folks on this forum, I wanted to "upgrade" it a bit.
My problem is:
I installed the BBC file onto the mem card (2 gig). It said click OK to restart device. I did, but now it gives me the Windows Mobile screen and NOTHING else. The (left) indicator light is flashing green but nothing else is happening. When I press any of the buttons, they light up, but the screen does not change.
Mine is the HTC original rom, unlocked. The only thing I have installed on it is Skype.
When I call it, the incoming screen comes in over the WM startup screen but that's it. The phone works but the "Phone - Incoming" notification stays visible even after I have hung up.
I can connect and sync with ActiveSync, but the screen does not change.
Even after I take out the battery (because that's the only way to turn it off) and take out the mem card and restart, same thing happens.
I am in DESPARATE need of help!!!!!
Any suggestions as to how to "unbrick" my baby?
If there is any other info you wold need in order to shed some light on the issue, just let me know.
Thanks in advance.
Dominic
Hi all.
I found a way around the problem.
Apparently the file I got was a VERY old version. I did a hard reset (luckily I didn't lose anything as I only had it a few days) and installed the file from the link on this forum: http://forum.xda-developers.com/showthread.php?t=327695 and it works fine now.
Thanks to all of you guys who already did the hard work in getting links, etc.
Later.
Dominic
Ok so i was updating rom from 1.5 something to the new 1.63. However, my touch screen is broke, and now i cant update because i cant tap the screen. So its stuck at windows mobile center setup. For the time being I switched my sim to older phone. When i put my sim back into the Tilt it goes to the same screen after the G3. Im pretty sure that after i get my screen fixed, it will work, im just wondering if this could cause long term damage i.e. file corruption or something similar?
It seems that your ROM upgrade happened successfully, and you just can't finish the phone setup process (like stylus calibration, time, etc.)?
If that's the case then you should be fine once you get your screen fixed. the state your phone is in now is a fully flashed state.
Also, it isn't clear if you were upgrading an official ROM or if you had Hard-SPL installed to unlock your CID. If you have Hard-SPL it is pretty difficult to mess up the flashing process as you can always get back to the bootloader and try again. It's not impossible to brick it however as some have unfortunately found out.
rovanesyan said:
Ok so i was updating rom from 1.5 something to the new 1.63. However, my touch screen is broke, and now i cant update because i cant tap the screen. So its stuck at windows mobile center setup. For the time being I switched my sim to older phone. When i put my sim back into the Tilt it goes to the same screen after the G3. Im pretty sure that after i get my screen fixed, it will work, im just wondering if this could cause long term damage i.e. file corruption or something similar?
Click to expand...
Click to collapse
you should be able to just force the device to lose power, change the screen when you can and bootup and it should load back to the initial setup screen
You can try some of these suggestions I found in other threads. I've never tried them on the Kaiser though it shouldn't hurt anything:
_____________________________________
connect your ppc to AS then may be 2 different ways
1. install SOTI Pocket Controller-Professional
or
1. open device via as and seek file WELCOME.NOT
2. create empty file with same name
3.overwrite existing file with empty file
_____________________________________
You can also try a program called Remote Screen Alignment
http://www.codefactory.es/downloads/mobile_speak_pocket/release/MSP_RemoteAlignment.zip
http://www.codefactory.es/downloads/mobile_speak_pocket/Remote_ScreenAlignment_Manual.doc
Hi all,
I saved loads of information on my tytn II during the summer. Very important files (notes most often). I was stupid enough to let WM6 store this on the main folder instead of the micro SD card.
Earlier this evening, I tried to use the camera and the phone froze (classical...) so I pressed "reset". Except it never really restarted! I could just reach the WM6 picture on the screen and it would stay there for ages... until a white screen with black text made it clear that a program was running while i'd pressed reset (i really doubt it, i hadn't launched anything), and that i'll have to press reset to recover the initial configuration of the phone (OUCH). I pressed reset just once (too scared to do a hard reset, im not crazy enough yet) but it still does the same thing, gets locked on the WM6 screen but never shows the damned white screen with the terrible message.
Is there any (even very expensive) way to retrieve the data? I hope it's not lost... I don't give a damn if the phone is a brick, i just want the data!
Thanks for your help guys, im a newbie and im really starting to hate WM6.
hi again...
I used bootloader thinking it could save my files with it (i don't think so!) and now it gets stuck at the "smart mobility" screen with the red serial numbers... it doesn't even reach the windows mobile screen (used to get stuck there before I used bootloader).
Please help
do you guys think i'll lose my data if I flash it (meaning i reinstall windows with a new ROM with bootloader?).
I've never flashed the device... Haven't used any ROM either, simply because i don't know how to do that.
thank you
I called HTC and they told me that reflashing would make me lose all my data... What can I do? Please help, no one has bothered to answer...
atonavis86 said:
I called HTC and they told me that reflashing would make me lose all my data... What can I do? Please help, no one has bothered to answer...
Click to expand...
Click to collapse
If you have an SD inside when trying to boot, take it out and try again.
Sometimes a faulty SD can prevent startup.
Hello
Ive finally got round to putting new radios and ROM on my diamond, a year after buying. Didnt want to before now incase i cocked it up (theres a lot of things to remember!)
Hard SPL went fine and i was putting the new radio on (1.00.25.05 in this case) when, at about 80% of the way through the install my pc froze (as its having a habit of doing at the most awkward times recently!)
I soft reset the diamond but now its at what i assume is the bootloader screen (?), its got red, green, blue and white bars and various writing, along with a message saying 'Upgrade ROM code error Please try again'
I had a hunt round and found something for another device saying how to get it back by loading a factory ROM through the bootloader menu but i dont know how to do this as i dont have a connection to activesync (phone wont go beyond this screen) etc.
If someone could explain in relatively simple steps it would help!
I should also clarify that the only way i can get this screen off is to remove all power but as soon as i put power back on it loads up direct to this screen again!)
When you device is in bootloader mode, you dont need active sync connection. just run the update utility and it will work without it, as it uses different drivers when connecting.
This turned out to be quite easy actually, i stumbled across the answer somewhere else!
Thanks for the help
Hello guys.i am new in the forum..I have a problem with my phone.My phone is not the Htc touch diamond 2 but is a taiwan clone model T5358+ coming with windows mobile 6.5.The problem is that after install the A-H_Brians's WM6.5 Taskbar ~ gfreek edition V5a.zip (i download from this site)
and[/url] choose the A fonts my phone restarts and working fine showing the new icons that i install.after i try to unistall this program and my phone restarts showing the yellow-orange screen writing windows mobile for about a minute and then restarts again etc.i try to make it soft reset with a small buttom located behind the battery but nothing happens.also i try to make it hard reset(holding the up and down volume keys and after the power)but one white screen coming writing that stage 3 of 3 it cannot continue because file missing in memory card.when i connect the phone with the pc and open the phone...my pc regognice the phone as a disk.but phone dont let me choose between the sync and disk data.it remains to disk data mode for 1 minute and after restart again etc.I am not expert but i understand that something wrong with the windows mobile software so it cause restart all the time.Is there any guy there he can help me?trully it will be very helfull for me since that i just bought this phone and i feel litle bad right now.i thing you are the only you can help me here...thank you.
I suggest you search for the clone thread and in the ROM Development forum and ask in there.
You'll probably have to hard reset, instruction will be found there as well.
Good luck!
thank you.
Hello bruce.and thank for youre answer.after a litle search here and after the help from the chinese guy that i bought the phone from ebay i found a solution.I flash the phone and i upload again the windows mobile 6.5.thank you for you help.