Phone restart after unistall fonts!!!!pls help.. - Touch Diamond2, Pure Q&A, Help & Troubleshooting

Hello guys.i am new in the forum..I have a problem with my phone.My phone is not the Htc touch diamond 2 but is a taiwan clone model T5358+ coming with windows mobile 6.5.The problem is that after install the A-H_Brians's WM6.5 Taskbar ~ gfreek edition V5a.zip (i download from this site)
and[/url] choose the A fonts my phone restarts and working fine showing the new icons that i install.after i try to unistall this program and my phone restarts showing the yellow-orange screen writing windows mobile for about a minute and then restarts again etc.i try to make it soft reset with a small buttom located behind the battery but nothing happens.also i try to make it hard reset(holding the up and down volume keys and after the power)but one white screen coming writing that stage 3 of 3 it cannot continue because file missing in memory card.when i connect the phone with the pc and open the phone...my pc regognice the phone as a disk.but phone dont let me choose between the sync and disk data.it remains to disk data mode for 1 minute and after restart again etc.I am not expert but i understand that something wrong with the windows mobile software so it cause restart all the time.Is there any guy there he can help me?trully it will be very helfull for me since that i just bought this phone and i feel litle bad right now.i thing you are the only you can help me here...thank you.

I suggest you search for the clone thread and in the ROM Development forum and ask in there.
You'll probably have to hard reset, instruction will be found there as well.
Good luck!

thank you.
Hello bruce.and thank for youre answer.after a litle search here and after the help from the chinese guy that i bought the phone from ebay i found a solution.I flash the phone and i upload again the windows mobile 6.5.thank you for you help.

Related

Strange Problem...

Hi everybody and sorry for disturbing you guys.
I've got a very strange problem with my friend's O2 XDA IIs (BA Device). The unit was upgraded to WM 5.0, however, I could not HR it. When I Reset the device and press Camera and Record button simultaneously (to make three lines appear), it is possible for me to move up and down and change the options but I can't finish the HR process by pressing the Messaging Button (it does work normally, not a physical prob). Besides, when I tried to upgrade the unit to another ROM (my friend was fed up with the current ROM since it was too slow), the unit couldn't recognize an USB Connection when it was in Bootloader mode (it could sync normally with my PC, already tested this). The screen kept showing Serial at the top and v2.06 at the bottom. As the result, no ROM upgrade Utility could do its job.
I've been using Pocket PC Phones for 2 yrs and this is the 1st time I've seen this problem, even though I used to use a MDA III for half a year.
Looking forward to hearing from you soon.
Tks and rgds.
Same here - device no longer recognized as USB in bootloader mode Previous ROM? helmi_c 2.3
In one of helmi's posts, he mentions something called "clearstorage". This might be what you are looking for. See here:
http://forum.xda-developers.com/viewtopic.php?p=356258#356258
After some playing around I have noticed that my BA hangs in BL mode, sometimes before I put it on the cradle, sometimes after I do that :/
try mtty software
it might be helpful in your case
search the forums for it and for available commands

Rom probelm

Three questions
MY computer has vista so it has no active sync
also my diamond is ****ed all the sudden it got stuck on the screen where it says windows mobile
so how can i install one of the rom that you guys made
but my phone doesnt actually start and y computer doesnt have active sync
so how can i install a rom on my diamond
does any one know???
i really need help guys thanksss alot
i didnt even download or any thing on my phone
it just stopped working suddenly
when i turn it on
first its the touch diamond screen then bell screen and then green sscreen saying windows mobile and it gets stuck there
also i cant hard reset it
i have tried every thing in the worlddddddd
vol down and enter both at same time then reset it then took the pin out kept my fingeres on bol down and enter key and it just goes to touch diamond screen the first one doesnt hard reset
Problems, problems, problems....
Firstly, Windows Vista does have ActiveSync... it's just 'under the skin' of Windows Mobile Device Centre.
If, as you say "It just stopped working" and you haven't done anything, the obvious answer is to get it replaced or repaired under warranty. The Diamond only came out last May, so none of our devices are out of the one year warranty period.
What's more likely is that you've tried to flash a ROM to your device without reading and understanding how to go about it. Either way, you need to search the 'Diamond ROM development' forum... you will definitely find an answer there.
Just one more thing, without trying to give you a lecture (which I often end up doing without intension ), you'll get a better response from the forum users if you keep your posts short and 'to the point'. Asking a load of questions all at the same time just puts people off wanting to help... very time consuming is this!
I appologise for the rant, I really am trying to help

Can i recover it???

Hi everyone, this is another midnight that i spend to find a way to recover my new used phone.
Please, really please, help me.
This is the problem:
A friend gived me his Tytn ii phone.
W.M 6.* .. i can't remember the right version.
this is what i did:
1) unistalled skype
2) re-installed skype
3) unistalled ohoner
4) installed winterface
5) uninstalled a register tool.
6) my memory stop at this point...
It stayed alive a couple of day and now.. STOP!!
it doesn't boot anymore.
This is what "he" do:
0) He vibrate
1) T-Mobile logo (he was germany)
2) RGB information
3) Black screen
4) HTC animated logo
5) Maya v1 logo (with his stone face)
6) STOPPPP
Sometime it looks like alive, if I open the phone the screen change, and stand out a lot of colored lines .
Sometime if a press all the keys i can press, appear the alignment wizard.
I try to align, and after a white screen, phone blocks.
I only want to recover my friend's contacts.. nothing else.
If i'll could do, i could think to rebuild the flash... BUT....
but but but but... but i need you!!!
i still belive...
maybe in a htc center,,,
what do you think about?????
thanks a lot
Malteni.
If you can't boot, I don't know that there is anything you can do. Can't even flash the ROM without being able to sync.
So, there is no way to recovery "my" contacts...
Maledizione....
I have to say something on that too. First: You can flash a ROM using the bootloader only. That works and will surely recover the phone. But the contacts will be lost then.
Have you tested Active Sync? Sometimes it is in the align screen windows and you can already use Active Sync then. I'm not sure about the Device Center Vista uses. Try to get the phone connected maybe it works.

diamond 2 strange behaviour

hi guys
got my htc diamond 2 yesterday. it's nto branded and it's not locked. it has a 6.1 windows on it. tried to do a hard reset but it did not work :| (took sim out and battery)
anyways...
as you imagine, I wanted to instal a nice ROM, so dowloaded 6.5 official ROM
when I try to instal it on my phone, after I press UPDATE, the phone goes on standby, active sync disconnects and the process of updating the ROM doesn't even start.
then I downloaded hard-spl, tried to install it but is says that the device is not connected to PC - although it is connected via active sync...
any ideas on how can I sort this out... your help is much appreciated!
forgot to mention some details...
when I try to instal a ROM, I get Error 260 (No connection)
I tried restarting my laptop, the phone and even tried on a different laptop - nothing works...
about the hard spl, I also instaled the required cab but nothing...
just hard reset manual...
hold both volumes and then hold power button
keep holding down until press "up volume" message appear to erase
after hard reset, use 1.83 HardSPL and after use whatever rom you wish
On e.g. Windows 7 you need to install another driver when TD2 is in bootloader mode (can easily be downloaded using winupdate while in bootloader mode).
BTW hard reset means pressing vol up AND vol down AND once reset button (with stylus).
HTC Touch Diamond2 SD Card ROM flashing
Look here: SD Card ROM flashing
Or Let me Google that for u.
DalvuS said:
just hard reset manual...
hold both volumes and then hold power button
keep holding down until press "up volume" message appear to erase
after hard reset, use 1.83 HardSPL and after use whatever rom you wish
Click to expand...
Click to collapse
thanks for your answer... I have tried doing the hard reset in all the ways, but it is not working.... i have tried with power button and reset button, while volume up and volute down were both pressed.. it does not work...
i've put a sd card in it and tried to run rom from there ... the way it's done is keeping volume down pressed and then turn the phone on.... the thing is that I don't get the tri-colour screen... it boots normaly and loads windows...
this is amazing... nothing seems to work on it...
Hard reset
Device must be turned off:
http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
hmmm
@S-Line - i have tried on windows xp and vista... and hard reset does not work on my phone :|
@Tom Lenferink thanks for the idea, i've got a card, formated fat32, put a rom on it with name 'TOPAIMG.nbh' and tried to do volume down and turn on the phone... it loads normaly, doesn't go on the coloured screen...
any more ideas guys? I can see 2 things that can be wrong
1) is not hard slp yet
2) buttons don't seem to work, btu they work in windows mobile
fake fake fake
don't bother guys, i just realised that the phone I got is a fine fake after diamond 2.... sorry for the trouble and people who want to buy diamond2, be very carefull.... it looks identical, windows is the same etc
andreti said:
don't bother guys, i just realised that the phone I got is a fine fake after diamond 2.... sorry for the trouble and people who want to buy diamond2, be very carefull.... it looks identical, windows is the same etc
Click to expand...
Click to collapse
Interesting, it means that they even copied the serial number if you could download the ROM from HTC website.
Could you pls post pictures of your phone from front and back side ?
How do you know it is not real TD2 (I mean, what is the difference ?)
Post pictures and I'll do a comparison so others know what to look out for. They're very rarely identical.
Andreti ???
hi guys, I just randomly found this thread. been looking for a diamond2 from second hand. bought one a week ago and had exactly the same problem with flashing. after some time i realised that it was a fake clone ugly piece of junk.
so you asked about the differences, here they are:
- the one i had, had no front camera.
- overall build quality was weird, you could tell just by opening it and removing the batt. all the inside parts were somehow covered/sealed with a ducktape - really not htc style
- terrible screeen - terrible colors, contrast, brightness (my good old s710 has much better display), not calibrated - you had to push 2mm below the actual button, slow cpu (all i know it wast really fast, dont know about the speed of the original, never held it)
- no g sensor, no gps module. not sure 100% but it had a shortcut for external gps and you had to push a button to rotate the home screen (i guess both of these kind of imply missing these features)
- when i tried to download the official fw, imei wasnt recognised - which i think, is the best way to find out. after downloading fw from other sources, i got the 260 error.
peace and be careful
Most clones have a 3.5mp camera and 128mb RAM
hard reset
Just a quick note, I tried to carry out a hard reset as in the manual. I could not get it to work - until I found that if I removed battery, refitted it, then a hard reset worked every time. Read my new post to see why I had to do a hard reset....!!!!!

[Q] REALLY NEED HELP hd7 keep restarting

My hd7 keep restarting once i connect it to the power
I don't know what is the reason lead to this horrible bug
My phone cannot charge normally now :'(
I ve flash a custum rom yesterday and it work normally after it
But since i download a lots of apps, homebrew apps today. The problem start to appear
I can't figure out what registry or tweaks or settings or root is the reason
But i really need help from developers or user experiencing this problem as i cant charge my phone
Sorry about my poor english and if i behave rude
I am willing to tell you all of the information from my phone if you ask
Are you running a OS 7.8 custom rom?
I would say that it's probably due to one of the XAP's that was installed, especially if your on 7.8. Alot of the XAP's are developed for 7.5 and some of the registry is different between the two, therefore may cause some unusual problems.
You might want to go through each XAP that you've used so far and change back the settings to default and then uninstall it, until you figure out which one is causing the problem on the device.
Another option is to perform a hard reset, but this will wipe all data, apps and XAP's from the device.
I know on my HD7 since installing 7.8, everytime I use an XAP tweak to disable the vibration on the 3 soft keys some unusual problem arises like the deice randomly restarts or it would cause a problem with IE tabs... For whatever reason. As soon as I re-enable vibration on the 3 soft keys everything worked fine and I never experience this problem when it was on 7.5.
Yes i am using wp7.8
I am going to try your method and luckily i didn't deploy to many xap
I think wptweak is the probably reason
Btw your comment really helps a lot thanks
w00dle said:
My hd7 keep restarting once i connect it to the power
I don't know what is the reason lead to this horrible bug
My phone cannot charge normally now :'(
I ve flash a custum rom yesterday and it work normally after it
But since i download a lots of apps, homebrew apps today. The problem start to appear
I can't figure out what registry or tweaks or settings or root is the reason
But i really need help from developers or user experiencing this problem as i cant charge my phone
Sorry about my poor english and if i behave rude
I am willing to tell you all of the information from my phone if you ask
Click to expand...
Click to collapse
no problem dude same thing is happed to me, and even i take it to the service center but nothing happend but when i reset my mobile everithing is good same as before, just hard reset your mobile and try to avoid nokia city lence and in root manager make it not trusted then everything will be ok. dont make all xap as trusted thats it.
nazim4net said:
no problem dude same thing is happed to me, and even i take it to the service center but nothing happend but when i reset my mobile everithing is good same as before, just hard reset your mobile and try to avoid nokia city lence and in root manager make it not trusted then everything will be ok. dont make all xap as trusted thats it.
Click to expand...
Click to collapse
It's interesting because each device running 7.8 will react and respond differently, depending on the tweaks, settings and XAP's being used.
I have Nockia City Lense set as trusted and use it frequently without it causing any problems at all on my device.
My friend uses the disable 3 soft key tweak on his HD7 without any problems but when I use it my device starts restarting.

Categories

Resources