Related
Hey all.
For once, I upgraded to wm 5 without any problems, well so I say.
Theres a few things, that I could do with.
When I originally tried upgrading, I copied the cab files etc from the ext rom ( o2's ) and I fancy installing some of the fixes they provide, but each one is called customization tools, so each time i install one, it uninstalls the previous. Any way around this?
Also, the joypad between the green and red phone, when the dialpad is open ( pressing green phone ) I used to be able to press up to view my contacts and down to see my history. Anyway to fix this?
One last, do the developers out there. I developer software for the ppc and windows using .net and cf.net. I would like to access the sdk of the phone it's self, which I know you can use CFNET's own framework to access certain things. But if theres anything else, i'd appreciate a heads up on it?
Kind regards
TIA
Gav
Hi, gRoberts
Can you tell where I can download WM5 for XDAs. I've searched but i haven't found anywhere (or I used the wrongkey to search)
Im waiting for your link.
Thanks alot.
nguyensonhm said:
Hi, gRoberts
Can you tell where I can download WM5 for XDAs. I've searched but i haven't found anywhere (or I used the wrongkey to search)
Im waiting for your link.
Thanks alot.
Click to expand...
Click to collapse
BlueAngel Windows Mobile 5.0 Home Page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
qyach said:
BlueAngel Windows Mobile 5.0 Home Page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
Click to expand...
Click to collapse
Thanks qyach
hijacking my thread lol
The previous versions were complicated, you had to get device id's etc correct or your phone was useless. So I downgraded back to shipped rom and lost my ext rom auto install feature.
This one, basically backup, unlock your rom, copy a file to the correct folder and run the exe, after that it's some complicated button presses and your in.
A tip! don't set a password when it first asks you. I did this on the last rom, and it locked me out completely. Not sure if its been fixed.
Gav
i tried upgrading to wm2005 and it works fine as a pda and for satnav but dosent work as a phone, it will not get anysignal and when it lodsa sometimes in the corner it shows the a redio version other times it willl show just the rom, ive tried upgrading just the radio, ive tried upgrading it all, ive tried returning it to standadrd and it just wont accept anything? ant help anyone? i just want it back to standard.
come one people, 65 views and not one reply? someone must be able to help? i remember when this place used to be helpful.
What operator are you on? All of the recent ROMs do not work on Orange UK. The phone and txt message functionality is broken.
As for not showing the ROM version, this always happens after a crash. Just reset again as soon as you see "NONE".
am a bit lost here.
am on orange UK and evreything works ok with this rom.
just thought i point that out.
opps,thats all rom's since mid november
TEXT,PHONE BLUETOOTH WIFI.
Read The Wiki
NeCrOpHiLiCaT said:
i tried upgrading to wm2005 and it works fine as a pda and for satnav but dosent work as a phone, it will not get anysignal and when it lodsa sometimes in the corner it shows the a redio version other times it willl show just the rom, ive tried upgrading just the radio, ive tried upgrading it all, ive tried returning it to standadrd and it just wont accept anything? ant help anyone? i just want it back to standard.
Click to expand...
Click to collapse
not being funny, but there are a few pages in the Wiki that can help.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home : explains all about WM5 on a BA
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5 Gives you STEP BY STEP instructions how to go back to 2003
NeCrOpHiLiCaT said:
come one people, 65 views and not one reply? someone must be able to help? i remember when this place used to be helpful.
Click to expand...
Click to collapse
Before you complain that users cant help you, try helping yourself. You will find that people are more willing to invest their time then!
realkinguk said:
am a bit lost here.
am on orange UK and evreything works ok with this rom.
just thought i point that out.
Click to expand...
Click to collapse
Wierd, you are the first to come forward to say that it works fine for you. Myself and a couple of other users haven't been able to get reliable telephony for months now. It may be a regional thing, perhaps only in Scotland. I've had replacement phones and I still have problems.
No one seems interested in helping as it's not something that can be easilly tested unless you have the problem yourself.
i was looking for hte downgrade link ill give that a go tomorrow, as tot he person that said i should try helping, how can i help if i dont know anything? we all need to learn and start somewhere. think ill be staying away from here with my spvm600 if thats the attitude this place is takeing.
Hey, it wasn't intended at you, obviously. What I was basically saying was that if you have the same problem, then don't expect a fix as it's a tough one to fix.
could it happen that you are one of those who downloaded the rom which someone had the gall to replace the original one? which rom upgrade did you use?
i cant remmeber what rom it was that i used now as it was about 2 months ago i done it, ive tried the downgrade link that was posted and when i open maupgrade it dosent see any rom on my device or any in the folder and when i click up grade it takes about 10 sconds then says tis done, which is obviously isnt dont, any mroe ideas please people?
NeCrOpHiLiCaT said:
i cant remmeber what rom it was that i used now as it was about 2 months ago i done it, ive tried the downgrade link that was posted and when i open maupgrade it dosent see any rom on my device or any in the folder and when i click up grade it takes about 10 sconds then says tis done, which is obviously isnt dont, any mroe ideas please people?
Click to expand...
Click to collapse
use one of the latest (i.e. helmi's or xplode's) and upgrade again. be sure to follow the instructions (including that for device data, and the no/yes/yes input). make sure also you were able to download the whole file (it was a problem for some users).
you might also want to upgrade your radio version (1.15.00).
good luck.
Closed this thread
go here:
http://forum.xda-developers.com/showthread.php?t=332789
itje said:
Ok here goes nothing
Whats in it (for now)
-TouchFlo with TF-settings
-10 button CommManager
-Htc Home build 2.0.814.722
-Networkwizard
-HTC Audiomanager
-psShutXP
-Hibernate
-TouchDialer
-MagicSS
-NotSoBlackKeyboardSkin
-HTC X-button 1,5
-HTC wmp skin
-Glossy Black bars
-Office 2007
-PHM registry editor
-Total Commander 2
-PIM backup 2,5
-Batterystatus
-Adobe Flash Lite
tweeks:
-Disable today items
-Disable sms sent notification
-Reminders show only once
-Wireless G enabled
-Disable customer feedback notification
-Security off
-SD battery drain fix
Removed:
-Windows Live (for better space and many dont use it, you can find cab to install newer version on the forum)
-Transcriber (VERY few uses it, saving space)
Instructions how to upgrade is in the Touch-IT folder.
READ IT.
If you dont, you will spend even more time infront of your computer flashing the official ruu before trying again, why waste time, use 1 min to read and understand.
Remember:
If you dont like what I have added, or what I have removed or w/e please dont spam this thread with lame comments.
Disclaimer:
I take NO responsebility if you brick your device, if you do search the forums before you come flaming me/us here at XDA.
IF you brick your phone (Brick=the phone can be used as a building brick, or maybe a paperweight? Because you cant start it up.) Its no others fault but your own.
Mainly the reason for bricking a phone is:
1. Not reading the instructions good enough
2. Not following the instructions.
3. Not having a RUU that can unbrick the phone (the official installer with the official rom for your specific phone, with your phones default language. In.ex if yu have a german phone by default, you need a german RUU, if not you will get invalid vendor error)
4. Not reading the instructions good enough..again
5. Not following the instructions...again
If you dont understand after reading CAREFULLY, then dont bother flash your device with this or any other rom.
I also recommend to use the pagepool changer found here http://forum.xda-developers.com/showthread.php?t=324955
I did nothing to the pagepool, because ppl have different experience with diffrent size on the pagepool, so thats why I leave that up to you
to find the correct pagepool size for your device.
Good luck
Download here: (only rapidshare for now)
Rapidshare
Click to expand...
Click to collapse
Downloading now, will post back when its installed
im just as qurious as a virgin at her weddingnight if it works out
Prepping my wing for it now
I will try this out and see what happens. I just started playing around with the other posted touch it rom. I do have an odd problem when i flash. I followed the instructions exactly. Established the aserg policies soft reset. put the phone in flight mode wait and soft reset. And then start the update. every time i do this tho i get this weird message titile ERROR - Uknown Status. First time i got it i acknowledged and that was a mistake as the flashing got screwed up. next time i didn't and the phone seemed to flash. and it was working. Anyways had this error ?
intothevoid said:
I will try this out and see what happens. I just started playing around with the other posted touch it rom. I do have an odd problem when i flash. I followed the instructions exactly. Established the aserg policies soft reset. put the phone in flight mode wait and soft reset. And then start the update. every time i do this tho i get this weird message titile ERROR - Uknown Status. First time i got it i acknowledged and that was a mistake as the flashing got screwed up. next time i didn't and the phone seemed to flash. and it was working. Anyways had this error ?
Click to expand...
Click to collapse
The error is completely normal, do not touch your screen when you see it. Let it sit and see if the installation finishes.
you can check my thread for install instructions as well
Flashing now cross your fingers
Im also uploading a mirror
hmmmmmmmmm.... interesting!
from the description looks like a perfect recipe of apps.
Will try tonight.
Thanks
also, would you rather us post in here, or in the development thread?
So far Im going on 20 minutes of install time, its still copying itsutils.dll currently.
WELLLLLL?????
whats going on then, anyone done yet
TylerC161 said:
also, would you rather us post in here, or in the development thread?
So far Im going on 20 minutes of install time, its still copying itsutils.dll currently.
Click to expand...
Click to collapse
post here, keep it simple
20 min??? wow
itje said:
post here, keep it simple
20 min??? wow
Click to expand...
Click to collapse
Mines 20 minutes into it to, but thats normal. I would say another 10 mins and it will be done. ITs copying the os.nb now.
Something crapped out on my machine and killed the connection, got to start over.
itje said:
WELLLLLL?????
whats going on then, anyone done yet
Click to expand...
Click to collapse
I'm downloading it rite now and will try it out shortly.
Bricked..
Trying again, loading RUU now.
TylerC161 said:
Bricked..
Trying again, loading RUU now.
Click to expand...
Click to collapse
awwwww!!
TylerC161 said:
Bricked..
Trying again, loading RUU now.
Click to expand...
Click to collapse
Same here, Loading RUU and will post back after ive tried again.
cleric said:
Same here, Loading RUU and will post back after ive tried again.
Click to expand...
Click to collapse
awwww times2
guess there might be a bigger diffrence with the wing os then I expected....hmmm
or maybe its the settings with the kitchen that is not fit for the wing? hmmmm
Or it could be we both just did something wrong.
I forgot to turn on flight mode before starting, Im about to attempt again.
try to install the enablerapi, and the cert.spcs also, I must confess im not sure what they do, but some have been sucessfull doing that when bricking only using asergspolicies...or maybe they just had luck
I have watch videos...read instruction etc, etc, all I could on ATT Tilt/Kaiser flashing...I still don't have a clue. Do I do some type of CID unlock 1st....then is there a Jump SPL and than a Hard SPL. Is any of them two done from the boot loader screen. I can fix most electronics but I don't understand.. no you-tube video...i saw it on flashing the kaiser....sound quality bad for the hard of hearing (me).
Goto http://forum.xda-developers.com/showthread.php?t=396922
Download Jump SPL and Run it. Then the hard-spl. This will then allow you to flash the custom ROMs on your Kaiser.
Regards,
Carty..
I just went through this a few days ago trying to flash my first custom rom. I have to agree it is incredibly confusing and contradicting, which is why I'm taking the time to post this. Just read as much as you can about it and don't try to flash the rom until you understand. I am no expert on this by any means, but this is what i did on my tilt to flash HardSPL. I tried to make this as simple as possible just so you see the exact steps I went through, but i highly recommend reading the thread linked in the previous post by Carty above and the other link I'm posting at the very end.
1. download JumpSPL1.93-KAIS.exe from http://forum.xda-developers.com/showthread.php?t=354061.
2. get the hardSPL version you need for your rom. I used v3.56 from the link Carty gave you in the post above, because the rom I am using was based on the official att 6.1 rom. You may need a different one for the rom you want to flash I don't know too much about this yet. Leave the folder where you unzipped the hardspl files open on your desktop so you wont have to look for it later.
3. connect your phone to the PC, and transfer JumpSPL1.93-KAIS.exe over to your phone with activesync. Remove your microsd card if you have one on your phone (very important).
4.run JumpSPL1.93-KAIS.exe on your phone, it should go to a bootloader mode with the tricolor screen and underneath it will say USB.
5.Unplug the phone from the PC, wait about 5-10 seconds and plug it back in. Activesync should NOT be able to recognize your phone. If it does, something went wrong so start over.
6. Finally you can run the KaiserCustomRUU.exe from the hardSPL folder on your pc desktop and follow the instructions. It will load the HardSPL on your phone.
7. if you want to make sure it loaded, shut down your device and when your are turning it on press both the power and camera button at the same time, it will go into bootloader mode and show you what SPL is on your device. mine says SPL-3.56.Hard after I loaded the hardspl. You are now ready to flash a new rom.
This wiki helped me the most:
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Read as much of it as you can, especially the "SPL questions?" link, that was the most useful for me.
I hope this helps
All good advice! I just loaded the HardSPL on my phone for the first time and it worked perfectly.
Now all i need is a work connection that doesnt block my attempts to download ROM's!!!!!!
tricky_uk said:
All good advice! I just loaded the HardSPL on my phone for the first time and it worked perfectly.
Now all i need is a work connection that doesnt block my attempts to download ROM's!!!!!!
Click to expand...
Click to collapse
LOL.
hjlow makes mirrors of the ROM downloads at Blogspot. Are those any good for you?
Ta
Dave
DaveShaw said:
LOL.
hjlow makes mirrors of the ROM downloads at Blogspot. Are those any good for you?
Ta
Dave
Click to expand...
Click to collapse
Sadly blogspot gets locked as well.......i've managed to download some stuff of here but in general sites it classes as 'personal storage' it gets a bit upset about...
if anyone knows any other way round i'd be eternally grateful!
ben_zin said:
I just went through this a few days ago trying to flash my first custom rom. I have to agree it is incredibly confusing and contradicting, which is why I'm taking the time to post this. Just read as much as you can about it and don't try to flash the rom until you understand. I am no expert on this by any means, but this is what i did on my tilt to flash HardSPL. I tried to make this as simple as possible just so you see the exact steps I went through, but i highly recommend reading the thread linked in the previous post by Carty above and the other link I'm posting at the very end.
Click to expand...
Click to collapse
Amen to that.. I like this guy.
Thx...clear and direct....now I am ready.
Carty said:
Goto http://forum.xda-developers.com/showthread.php?t=396922
Download Jump SPL and Run it. Then the hard-spl. This will then allow you to flash the custom ROMs on your Kaiser.
Regards,
Carty..
Click to expand...
Click to collapse
does this work on diamond?or i mean, should i frist jump spl ant hen hard, or just jump spl?
http://forum.xda-developers.com/showthread.php?t=408109&page=506 post 5055
materijalmen said:
does this work on diamond?or i mean, should i frist jump spl ant hen hard, or just jump spl?
http://forum.xda-developers.com/showthread.php?t=408109&page=506 post 5055
Click to expand...
Click to collapse
This will then allow you to flash the custom ROMs on your Kaiser.
Click to expand...
Click to collapse
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
denco7 said:
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
Click to expand...
Click to collapse
i have tried this already
http://forum.xda-developers.com/showthread.php?t=408621 but nothing has changed...i asked for help, but nobody answers....see the last posts int that thread.
materijalmen said:
i have tried this already
http://forum.xda-developers.com/showthread.php?t=408621 but nothing has changed...i asked for help, but nobody answers....see the last posts int that thread.
Click to expand...
Click to collapse
Unfortunately this is the Kaiser forum and you will get even less help here.
Post your questions in the Diamond forum and people will help,when and if they are able. And in the meantime, read and search and try to figure it out for yourself, All the steps and instructions are there.
Sometimes people, unfortunately, mistake this site for the HTC free support line, with 12 techs waiting at their PC's to help. Then they get irritated that no one answers their requests for help on a timely basis . If people won't or can't answer your questions then you need to figure it out on your own.
The bottom line is, if you don't know what you are doing, then you shouldn't be messing around with your phone. Sorry
denco7 said:
Unfortunately this is the Kaiser forum and you will get even less help here.
Post your questions in the Diamond forum and people will help,when and if they are able. And in the meantime, read and search and try to figure it out for yourself, All the steps and instructions are there.
Sometimes people, unfortunately, mistake this site for the HTC free support line, with 12 techs waiting at their PC's to help. Then they get irritated that no one answers their requests for help on a timely basis . If people won't or can't answer your questions then you need to figure it out on your own.
The bottom line is, if you don't know what you are doing, then you shouldn't be messing around with your phone. Sorry
Click to expand...
Click to collapse
I second Denco Read Read Read Read Read........ as anything you will ask, or can even think to ask..... more than likely has ALREADY been asked AND Answered.
Htc XDA member: how can I help you today?
Xda Newb: My phone isnt working.... Can you fix it ?
Htc XDA member: is your phone plugged in and turned on?"
Xda Newb:Wheres the on button?
( 1 min later) where do I plug it in at ?
(2 mins later) whats a battery?
(2.25 mins later) how do I know its on?
(2.3 mins later) why wont you answer me ?
(2.35mins later)Why arent you telling me my answers?
(2.4 mins later)whats wrong with my phone?
(2.5 mins later) You guys must be jerks because you wont spoon feed me [email protected]@@!!!
XDA MODERATOR : you noob you are banned for not reading PAGE 1 of the GODDAMN WIKI as all your answers were right there 1 click away. Now you cant access them HAHA. This is what you get for being IMPATIENT AND ANNOYING ( They should really do this here )
LOL
Just my rant
denco7 said:
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
Click to expand...
Click to collapse
How is this link related to the topic?
I want to use JumpSPL to change the version of HardSPL I have on diamond b/c my USB port does not work.
kyniemxotxa98 said:
How is this link related to the topic?
I want to use JumpSPL to change the version of HardSPL I have on diamond b/c my USB port does not work.
Click to expand...
Click to collapse
And what I said was that this was the Kaiser forums and not the Diamond forums. Putting Kaiser Spl's on a Diamond will brick your phone faster than throwing it into a bucket of water. So I gave him a link to the Diamond forum and Diamond Security/CID/Sim unlocker.
How is your question related to the Kaiser forums ?
Will it work on my TP/Excalibur? No as phones have different hardware to which is why h-spl's are device specific.
The best way to help yourself and not get a brick "expensive paperweight" is to head to device subforum and do some reading, as last thing you want is to be creating a thread named "Help"
denco7 said:
And what I said was that this was the Kaiser forums and not the Diamond forums. Putting Kaiser Spl's on a Diamond will brick your phone faster than throwing it into a bucket of water. So I gave him a link to the Diamond forum and Diamond Security/CID/Sim unlocker.
How is your question related to the Kaiser forums ?
Click to expand...
Click to collapse
Since I cannot find anything helpful in Diamond forum, I dig around in other forums to try to rescue my phone and make it usable.
Which is a recipe for diasaster...seriously, if you are gonna do something as stupid as to try to make something SPECIFICALLY for another device work on yours, then you do not deserve to own a Diamond.
I just performed this task 29 and rom upgrade for a friend and it worked well. I tried it on my phone but its the wrong model id obviously.
I was hoping somebody could make it so that it works on our phones as its a lot easier than performing the MTTY steps
It was in the rom section in the TP2 forum, so i put it in this section. Mods remove it if necessary but i felt this would be the right place for devs to modify it.
http://forum.xda-developers.com/showthread.php?t=649191
try the RUU from attachment and let me know if it worked.
I tried it, and it works.
Not done this before, could you give a brief "How to" please?
Shambolicuk said:
Not done this before, could you give a brief "How to" please?
Click to expand...
Click to collapse
Download the attachment, place your ROM's .nbh with it and that's it. Use it as normal.
MisterGT said:
Download the attachment, place your ROM's .nbh with it and that's it. Use it as normal.
Click to expand...
Click to collapse
I did what u say, put the signed .nbh in the folder and ran the rom update utility.exe, it installed phone rebooted and now cant get past the touch diamond splash screen phone wont boot any ideas?
What is the rapitool.exe ?
I've posted before the Task29 for Touch Diamond 2 aka Topaz
http://forum.xda-developers.com/showpost.php?p=6446054&postcount=11
REMEMBER It's going to erase everything on your phone after that you could flash any ROM as usual, this Task 29 package will replace your boot screen
Its ok i did some reading and im back up and running Many thanks guys.
is this a good app? wondering if i should give it a try...
eltoro said:
I've posted before the Task29 for Touch Diamond 2 aka Topaz
http://forum.xda-developers.com/showpost.php?p=6446054&postcount=11
REMEMBER It's going to erase everything on your phone after that you could flash any ROM as usual, this Task 29 package will replace your boot screen
Click to expand...
Click to collapse
I thought it might be, but searching didnt bring it up for me at least. So we should make it a sticky as it is in the TP2 forum.
!Aman! said:
try the RUU from attachment and let me know if it worked.
Click to expand...
Click to collapse
works thanks
eltoro said:
I've posted before the Task29 for Touch Diamond 2 aka Topaz
http://forum.xda-developers.com/showpost.php?p=6446054&postcount=11
REMEMBER It's going to erase everything on your phone after that you could flash any ROM as usual, this Task 29 package will replace your boot screen
Click to expand...
Click to collapse
oops, never noticed it
xboxhaxorz said:
I thought it might be, but searching didnt bring it up for me at least. So we should make it a sticky as it is in the TP2 forum.
Click to expand...
Click to collapse
no need to make a sticky, we can add it to Rollup section. i was hoping that as OP you take the responsibility of updating first post with proper info, instructions, credits blah blah, so that it is as useful a thread as in TP2 section.